This patch adjusts the matching of the IP address such that the external
IP address is used as opposed the the NAT-local address. It is follow-up
fix of the conversion to the uplink session interface.
Issue #3961
Apparently the skewed motion timings came from the issue fixed by
"timer: restore semantics of periodic timeout 0". With the current
version of the timer, the original motion parameters work just fine.
This patch restores the ability to launch nitpicker within a gui_fb
window. It is a follow-up fix for "nitpicker: make framebuffer and input
optional".
Issue #3812
This patch enables sculpt to utilize the CPU reset mechanism via the
PS/2 controller as well as the information provided via the ACPI FADT
information. Whenever the /config/system file is changed to <system
state="reset"/>, both mechanisms are triggered.
Supporting both mechanisms is useful because the PS/2-based reset does
not work reliably on modern machines. The PS/2-based reset is useful in
the case when the FADT reset information refers to the PS/2 command
port. In this case, the platform driver is unable to access this port
because it is already handed out to the PS/2 driver. In this case, the
PS/2 driver kicks in.
Issue #2726
This patch adds the handling neccessary for clients to upgrade the cap
quota of their GUI session. Until now, the upgrade mechanism supported
only RAM quota.
The limitation became visible once a client - in the particular case the
motif_decorator - attempted the cap upgrade of its GUI session. The cap
quota would arrive at the wm, but the wm would keep it instead of
forwarding the quota to nitpicker. This resulted in an infinite retry
loop at the motif_decorator, ultimatedly depleting all its cap quota.
The window manager infers the overall state from the intercepted input
events for the decorator and all GUI clients. However, each of those
parties have an independent input-event stream. Whereas the order of
events within one GUI session is strict, the order of events between GUI
sessions is arbitrary. The window manager wrongly relied on a global
event ordering to track the pointed-at GUI session.
The patch removes the assumption of a global event order by tracking the
relevant pointer state for each GUI session independently and evaluating
these states when propagating the pointer position to the decorator.
Fixes#4059
The addition of further keyboard layouts would otherwise pollute the
config/ directory too much.
Caution: When updating Sculpt OS, don't reuse your existing
config/event_filter file unmodified! You need to replace the chargen
includes, pointing to the new location, e.g.,
<include rom="en_us.chargen"/>
<include rom="special.chargen"/>
must be changed to
<include rom="keyboard/en_us"/>
<include rom="keyboard/special"/>
Issue #4055
This patch extends the settings dialog with the ability to select the
keyboard layout between the options that are included in the sculpt
image. The manual configuration is of course still possible by editing
the /config/event_filter directly.
If both the fonts configuration and the event-filter configuration are
managed manually, the settings button and window are not displayed.
Fixes#4055
By sorting the reported output, all consumers of the reports become able
to rely on a deterministic order. For example, the file browser of
Sculpt OS, the launcher menu items, and the depot-selection items will
appear in a predictable order.
Fixes#4054
This patch adds session-routing options to connect components to the
capture/event interfaces of the global nitpicker GUI server or the
leitzentrale GUI server. It thereby enables the implementation of screen
capturing components, remote management tools, or virtual keyboards.
Since those services are very powerful, they are subsumed under the
"hardware" category of the component graph as opposed to the GUI
category, which guarantees the separation of clients.
Fixes#4053
This patch adds 4 priority levels to the runtime subsystem. The highest
priority is used for components that are critical for the operation of
Sculpt, in particular the Leitzentrale GUI. All regularly deployed
components are assigned the lowest priority by default.
With priorities available in the runtime subsystem, this patch flattens
the priority levels at the top-level init to only two levels and
overlays the priority bands of the drivers, leitzentrale, and runtime
subsystems into one priority band. This has three benenfits:
- This change prevents the starvation of the Leitzentrale GUI from a
spinning high-priority driver (issue #3997).
- The change will also ease the hosting of latency-critical components
in the runtime subsystem that are prioritized higher than regular
components, the storage stack, and the network stack.
- The Leitzentrale GUI remains always perfectly responsive regardless
of the workloads deployed from packages. In the previous version,
the runtime graph was sometimes stuttering on high system load.
Issue #4045
This patch triggers the immediate removal of part_block once the
discovery of a fresh inserted USB stick has completed. Without the
patch, part_block was retained until the runtime was reconfigured the
next time for other reasons (e.g., toggling an inspect view). Until the
next reconfituration, part_block tended to stand in the way of directly
assigning the USB device to a VM.
This patch increases the RAM quota of the nitpicker instance for the
leitzentrale to make it suffice for the buffering of content during
resize operations. This fixes a flickering artifact when having an
inspect view open while entering a WLAN passphrase. When the connect
button appears or disappears (depending on the number of written
characters), some parts of the inspect terminal would flicker sometimes.
This prevents the log terminal from adjusting itself to the whole screen
size before the leitzentrale window layout is applied. This intermediate
size can otherwise exhaust the 8 MiB of RAM quota of the log terminal.
Issue #3970
This commit improves the performance of the pipe plugin by using local
signal handling and avoiding sending a signal during write when pipe
buffer is full.
Issue #3583
All pipe-ends were notified at the same time which leads to dead-locks.
This commit mitigates this by having a signal handler for each pipe and
each pipe-end respectively.
Issue #3583
The vfs pipe plugin can now be used as named pipe which anables data
transfer via file handles from one component to another. E.g. if one
would like to send data from component A to stdin of a libc component B,
one can do so by simply writing to that fifo file.
Issue #3583
Note, OpenSSL now comes as one combined depot archive *openssl* that
replaces the former *libssl* and *libcrypto* archives. The libraries are
still separate binaries for compatibility with legacy software.
Issue #3773
The deadlock reported in #3236 could be reproduced via the wm.run script
and the modification of test/nitpicker in commit "nitpicker: fix destroy
with invalid handle" by clicking on the testnit entry of the launchpad.
This patch fixes the deadlock by releasing the locked pointer early in
the destruction path, which is legitimate as the wm is single-threaded.
Fixes#3236
No code in this class uses this private member variable. This prompts
clang to produce a warning message about it. Fix it by dropping the
variable.
Issue #3985
This private member variable is not used anywhere in the code. This
produces compilation warning when using clang instead of GCC. Drop the
unused variable.
Issue #3985
The State enum and _state private member variable are not used anywhere.
This produces an extra warning when building the code with clang instead
of GCC. Remove this dead code.
Issue #3985
The code fails to build with clang due to the following warning/error:
error: '_INCLUDE__NANO3D__SQRT_H_' is used as a header guard here,
followed by #define of a different macro [-Werror,-Wheader-guard]
Fix this by removing the extra underscore from this header guard
definition.
Issue #3985
* Remove SPEC declarations from mk/spec
* Remove all board-specific REQUIRE declaratiions left
* Replace [have_spec <board>] run-script declarations with have_board where necessary
* Remove addition of BOARD variable to SPECS in toplevel Makefile
* Move board-specific directories in base-hw out of specs
Let the NIC router provide an Uplink service besides the Nic service that it
already provided. Requests for an Uplink session towards the NIC router are
assigned to Domains using the same <policy> configuration tags that are used in
order to assign Nic session requests. The MAC addresses of Uplink session
components are _NOT_ considered during the allocation of MAC addresses for NIC
session components at the same Domain. The task of avoiding MAC address clashes
between Uplink session components and Nic session components is therefore left
to the integrator. Apart from that, Uplink session components are treated by
the NIC router like any other interface.
Ref #3961
This patch relaxes the need to specify the rom content of all pkg dependencies
in each runtime file. Whenever a dependency features a runtime file, the
contained <content> <rom/> ... </content> nodes are implicitely included.
Fixes#3981
This patch complements the commit "nitpicker: defer hover changed while
dragging" with fixes of the window layouter and motif decorator.
- Handling of empty pointer model (after unhovering a decoration)
instead of not updating it.
- Re-applying the hover model to the window layout when leaving the
drag state. This addresses the corner case that the hover model
changed during the drag operation (which is rightfully not handled
while dragging).
- Letting the window layouter enter the drag state only if a dragged
window is defined.
Issue #3973
When idle, the decorator still consumes a bit of CPU time when triggered
by the GUI session's sync signal. This patch installs the sync handler
each time the decorator goes idle.
* Introduce CPU quota for driver subsytem (needed by sd_card_drv)
* Introduce CPU quota for runtime subsytem and nic_drv (needed by fec_nic_drv)
* Increase CAP quota for inspect terminal slightly
* Add sculpt packages for imx8q_evk
Fix#3958
* Introduce sculpt-[board] specific package
* Move rtc driver into managed drivers sub-system
* Name nic_drv in a generic fashion in sculpt_manager
* Copy over pc-specific config files only when building for PC
Ref #3958
Originally the outgoing buffer was flush when the terminal was
detached. Since we cannot do that at this point, make the flushing
part of the common cleanup procedure.
Issue #3682.
Rather than calling 'ssh_disconnect' from within the Terminal session,
flag the detached terminal in the session and let the event loop do the
cleanup. Otherwise it might happen that the 'ep' (handling the Terminal
session) as well as the 'pthread.0' (executing the ssh event loop) end
up both triggering the cleanup concurrently.
Issue #3682.
The CBE repository contained a lot of Genode-specific code despite the fact
that the CBE core logic is not bound to Genode in any way. Therefore the
Genode-specific CBE code is moved to the 'gems' repository to form part of
Genode mainline. The remaining CBE code becomes a port in Genode instead of
being invoked as sub-repository.
The commit combines the following work steps:
* add all files removed from CBE repository
* add CBE port files
* make all CBE libs and targets build again
* make all CBE run scripts succeed again
* make all CBE recipes build again
* make CBE autopilot succeed again
* let CBE autopilot use 'libsparcrypto' contrib dir and Genode build dir
instead of '.ci' dir in CBE contrib dir (remove '.ci' dir from CBE repo)
* let CBE autopilot always check for all ports
* make CBE autopilot directly executable
* fix license headers in all Genode CBE files
* remove unused VFS replay component
* remove unused CBE test
* remove unused external crypto
* remove unused files in run dir
* remove unused external trust anchor
* add cbe_tester test to autopilot list
* get rid of directories 'include/cbe_*' and 'include/utils'
Fixes#3937
Right now the same code dealing with nic setup on qemu is duplicated
in many different run scripts. It makes it unnecesarily complex to
change the existing config or add support for new nic types. Lets move
all this common code to qemu.inc.
Ref #3825
- Show "..." for resource-assignment menu entry because it leads
to a sub menu.
- Avoid dialog changes when clicking on "Add component" while a
routing or resource dialog is unfolded.
The initial implementation of the affinity configuration in
"depot_deploy: support affinity configuration" added the affinity
location attributes to the <start> node of the deploy config. This patch
moves the information into a dedicated <affinity> sub node as done by
the init configuration. So the context of the attributes 'xpos', 'ypos',
'width' and 'height' becomes clear.
It also fixes a usability issue in Sculpt that occurred during testing:
When configuring multiple components with custom affinities, the
resources dialog of later components would wrongly display the state of
earlier components instead of displaying the fresh (default) state. The
resulting configuration would then not match the displayed information.
This is fixed by resetting the dialog state.
As another minor cosmetic change, the patch adds a line break in front
of copied <config> or <heartbeat> nodes.
Issue #3597
With the move of the storage-management dialogs to the graph in Sculpt
version 20.02, the ability to unselect the buttons for destructive
storage operations such as format or expand disappeared. This patch
restores the original behavior.
This patch enables the menu view's new ability to respond to font-size
changes in Sculpt so that the menu view instanced no longer need to be
restarted whenever the screen resolution or font size is changed.
Fixes#3875
This patch allows the use of the VFS watch mechanism for the glyph file
of the TTF VFS plugin so that clients become able to dynamically respond
to font reconfigurations.
Issue #3875
By default, Vim renames a written file to a backup file suffixed with
"~" before writing the current buffer to a new file. Consequently, there
exists an intermediate state when no file exists. Should a client watch
such a file to obtain dynamic configuration info, it observes the empty
state.
Some components have builtin heuristics for such a situation. In
particular, the window layouter falls back to a predefined default
'rules' if no rules are provided as a file. So when interactively
editing window-layouter rules using Vim, it can happen that the manually
maintained rules get overwritten by the default rules.
By setting 'set nowritebackup', we can sidestep this issue by preventing
Vim from producing the bad intermediate state.
