With the update to L4ka::Pistachio, we no longer need to patch the
contrib sources. Our patch went upstream in the meanwhile.
Apparently, gcc-4.7 is picky about specifying the '-melf_i386' argument
at the command line of the GCC frontend. We need to make sure to use the
'-Wl,' prefix.
The eglgears application depends on 'sqrt'. With the old tool chain,
this symbol was resolved through the dependencies of the 'gallium'
library. This does not work anymore for the new tool chain.
A similar issue arised for avplay, where we need to explicitly
state the av components in the LIBS declaration of the target.
The terminal has a lot of bits that may be worth reusing outside the
single implementation. Those bits are now located at 'include/terminal'
in the gems repository.
Replacing the local name of a capability index object which exists in the
capability map can destroy the AVL tree order of the capability map. With
this patch the outdated object gets removed from the map and a new object
gets inserted afterwards.
Fixes#435.
After this commit "make prepare" uses HTTP, HTTPS, or FTP where possible
fvor downloading third-party source codes. This prevents problems with
strict firewall rules where only selected ports are usable.
Unfortunately, git.l4android.org does not support Git via HTTP and,
therefore, the sources need a working Git port (9418).
Fixes#443.
* Introduces Schedule_context
* Use fast-interrupts or normal interrupts
* Add mode-transition between secure/non-secure world
* Limit system resources for Genode apps due to non-secure world
This commit implements the newly introduced Vm session interface to be used
on top of TrustZone capable Armv7 CPUs. Therefore a new Schedule_context is
introduced in the kernel. Threads and Vms are both Schedule_contexts used
by the scheduler. In contrast to a thread a vm uses a different assembler
mode switch to the non-secure, virtual world, as well as another exception
is used, when the non-secure world is left. For both worlds to co-exist
the interrupt-controller needs to be configured, so that the secure (Genode)
world uses fast-interrupts only, and the non-secure world only legacy
interrupts.
The only TrustZone capable platform the base-hw kernel works on top of
is the CoreTile Express 9x4 for the Versatile Express motherboard. For a
virtual machine working properly on top some platform resources must be
reserved. Therefore there exist two flavours of this platform now, one with
the 'trustzone' spec-variable enabled, and one without. If 'trustzone' is
specified most platform resources (DDR-RAM, and most IRQs) are reserved
for the Vm and not available to the secure Genode world.
Driver definitions which are used by kernel/core in base-hw, and also by other
drivers (e.g. from the os repository) have to reside in the generic
base-repository, for instance some uart drivers. All drivers which are
interesting for one of the sites only (sp804 for timer driver, or
cortex_a9 cpu driver for base-hw) should reside in the respective repos.
Factorize cpu context out of Cortex A9 specific definitions. Moreover, there
is already a Cpu_state object containing all common ARM registers. We use
this as a base for the cpu context switching done by the base-hw kernel.
The Cpu_state class get extended by a cpu-exception field, that stores the kind
of exception raised when the corresponding context got interrupted. This
information is used not only by the base-hw kernel, but also by the TrustZone
VMM that is build currently.
The 'Cpu_state' in 'base/include/base/cpu_state.h' is not needed anymore.
Moreover, it's inconsistent with the architecture-specific definitions
of 'Cpu_state' that all reside in <cpu/cpu_state.h>.
By now all services in core where created, and registered in the generic
main routine. Although there exists already a x86-specific service (I/O ports)
there was no possibility to announce core-services for certain platforms only.
This commit introduces a hook function in the 'Platform' class, that enables
registration of platform-specific services. Moreover, the io-port service
is offered on x86 platforms only now.
By naming all board declaration (previously in base/include/drivers/board) the
same way, and putting them in platform-specific include-pathes, we save additional
declaration redirection in the base-hw kernel, and in driver definitions.
By adding a "mac=XX:XX:XX:XX:XX:XX" attribute/value pair to the nic_bridge's
configuration one can define the first MAC address from which the nic_brigde
will allocate MACs for it's clients. Note: that the least relevant byte will
be ignored, and ranges from 0-255. Fixes#424.
Areas of an attached dataspace which have never been accessed cannot get
unmapped. With this patch this case is not treated as error anymore.
Fixes#398.
There are certain programs that need gettimeofday(), e.g.
network-related tools like ping(1) etc. but also filesystem-related
programs like find(1) etc. and of course time-related programs like
date(1).
As there is currently no interface in Genode for actually using clock
devices like RTC on x86 (though there is a driver for it) we "abuse"
the timeout_scheduler thread to at least provide flow-of-time.
Noux: add clock_gettime() implementation
For now, only CLOCK_SECOND is supported.
Noux: add utimes() dummy
Fixes#401
The 'delete (void *)' operator gets referenced by compiler generated code,
so it must be publicly defined in the 'cxx' library. These compiler
generated calls seem to get executed only subsequently to explicit
'delete (void *)' calls in application code, which are not supported by
the 'cxx' library, so the 'delete (void *)' implementation in the 'cxx'
library does not have to do anything. Applications should use the
'delete (void *)' implementation of the 'stdcxx' library instead. To make
this possible, the 'delete (void *)' implementation in the 'cxx' library
must be 'weak'.
Fixes#419.
This patch moves the thread iterator function declarations in GDB
monitor's 'Cpu_session_component' above the 'CPU session interface'
comment, because these functions are not part of the CPU session
interface anymore.
Fixes#10.
In Genode's paravirtualized block driver a request cache is used to find again
Linux request structures via corresponding block-session packets. To work
correctly the cache needs to have at least the same size like the
block-session's queue-size.
Print Fiasco.OC kernel debugger messages into a file instead of a pipe
in the default l4linux run-script. Thereby rarely triggered issues by the
nightly running buildbot can be analyzed after the test failed.
