The file listed only enabled="false" in the audio adapter tag. However,
setting only this option to true isn't sufficient for guest audio to work.
One has to set also enabledIn respectively enabledOut in the same tag. The
new default vbox6 file reflects this.
Fixes#4476
This patch fixes a potential data corruption issue that could occur when
issuing large I/O requests to vfs/rump, which don't fit into the default
block I/O buffer of 128 KiB. Note that we haven't observed the problem
in practice (Sculpt hosts vfs/rump in a dedicated vfs server, which
fragments requests) but spotted the issue while reviewing the code. We
could trigger problem by explicitly changing the I/O buffer size to 32
KiB.
Issue #4474
This patch changes the meaning of the 'offset' parameter of the
'produce_write_content' and 'consume_read_result' hook functions.
The value used to reflect the absolute byte position but in practice,
a job-relative byte offset is desired.
Issue #4474
Before this commit, the block-request handler was implemented as
Io_signal_handler and, additionally, the USB driver called the
block-request handler on request completion directly on I/O level. This
is generally a bad idea because I/O handlers should avoid to have direct
global side effects. In contrast, application logic should be
implemented in way that it consumes atomic state changes after I/O
completed. Now USB I/O completion locally submits a signal to the
block-request Signal_handler.
This patch reduces the response time of supposedly stuck situations like
an unresponsive part_block component. First, it reduces the heartbeat
rate from 1 to 2 seconds to make it consistent with the frequency of
state reports. Second, it allows up to four skipped heartbeats until
regarding the situation as stuck. With those changes, the prolonged
initialization sequence of a USB ZIP drive succeeds with Sculpt.
The Uplink_test used to end in an uncaucht exception about a failed packet
allocation on several x86_32 platforms.
* Destruct and re-construct the corresponding TX packet allocator during a
link-down-up step in the Uplink test. Fixes the exceptions but results in a
never ending test.
* Decouple the link-down-up steps from the handling of packet stream signals
by simply triggering it with a local periodic timeout of 1 sec period.
This prevents that the Uplink_test never finishes because it destructs the
Uplink connection too often.
* The test finishes not before at least 3 link-down-up steps were executed.
* Replace the Allocator_avl's used for the TX packet allocators of the Nic
and Uplink Connection with the better suited Nic::Packet_allocator.
Ref #4419
The error message
"Command buffer creation failed" in intel_dsb.c repeatedly appears
during connector hotplug. Since the driver works also without this DMA offload
optimization, disable the functionality.
Issue #4450
The service is merely announced but trying to request a session always causes a
Service_denied exception. This helps in scenarios where the client is
won't open a session anyway but expects the service to be available. This is
considered a temporary solution.
Ref #4419
This patch handles the corner case of switching virtual desktops while
child views are visible. Examples of such child views are tool tips,
pull-down menus, or the graph of the top-view utility. The switch to
another virtual desktop would implicitely turn the child views into
top-level views of the root nitpicker GUI server until switching back
to the original virtual desktop.
The patch implements the expected behavior of hiding all child views
that belong to a disappearing top-level view.
As it stands, the implementation requires minimal reflection measures to
implement correct cleanup procedure. static_cast<> cannot be used as it
does not implement runtime type casting as dynamic_cast<> does.
This patch reverts the vfs-watch-handle creation whenever the subsequent
allocation of the VFS server's 'Watch' object fails. This can happen
when the session RAM or cap quota is depleted.
Fixes#4472
The issue came apparent with Windows Guests and USB passthrough of
smart-card readers. If the VM is powered off, PDMR3Term cleans up all
devices incl. (first) acpi and (later) devxhci. The latter used a
dangling reference to ACPI structs in a indirect call to
apicIsLogicalDest() from xhciR3Destruct().
VMMR3_INT_DECL(int) PDMR3Term(PVM pVM)
virtualbox6/src/VBox/VMM/VMMR3/PDM.cpp:817
"apic" (pDevIns->pReg->szName)
static void apicR3TermState(PVM pVM)
virtualbox6/src/VBox/VMM/VMMR3/APIC.cpp:1235
"qemu-xhci" (pDevIns->pReg->szName)
static DECLCALLBACK(int) xhciR3Destruct(PPDMDEVINS pDevIns)
repos/ports/src/virtualbox6/devxhci.cc:431
void usb_detach(USBPort *port)
<qemu-usb>/src/lib/qemu/hw/usb/core.c:70
static void xhci_port_notify(XHCIPort *port, uint32_t bits)
<qemu-usb>/src/lib/qemu/hw/usb/hcd-xhci.c:2592
static DECLCALLBACK(void) pciSetIrq(PPDMDEVINS pDevIns, PPDMPCIDEV pPciDev, int iIrq, int iLevel, uint32_t uTagSrc)
virtualbox6/src/VBox/Devices/Bus/DevPCI.cpp:398
static bool apicIsLogicalDest(PVMCPUCC pVCpu, uint32_t fDest)
virtualbox6/src/VBox/VMM/VMMAll/APICAll.cpp:797
The fix removes our Qemu library reset from xhciR3Destruct() and
registers xhciR3Reset() as PowerOff hook.
Thanks to Raphael for the thorough investigation.
The quota adjustments prevent the leitzentrale's decorator from running
out of RAM, and allow the nitpicker GUI server to preserve buffer
content during resize (reducing flickering artifacts) when using a
screen resolution up to 2560x1440.
This fixes the following warning when building the binary archive:
Library-description file vfs_capture.mk is missing
Library-description file vfs_tap.mk is missing
'Platform::Device_pd::attach_dma_mem' may lead to insufficient resources
for meta data, which is reflected to the client via 'Out_of_caps' or
'Out_of_ram'. In case the client upgrades its session the quotas need to
be passed to core as done by
'Platform::Device_pd::Expanding_region_map_client::attach'.
issue #4451
Use 'avail_caps' and 'avail_ram' for resource guards because 'used_caps'
and 'used_ram' do not account for resources given to the platform
driver. This lead to incorrect resource accounting by the GPU
multiplexer.
issue #4451
The calculations of packet_size and packet_count in the block_io() did
not consider rounding errors. This resulted in diverging values over
several bisecting operations (/= 2) and wrongly-size packet allocations
as well as memcpy operations.
Related to #2263 (comments about partial block accesses and
_block_io()).
Fixes#4471
The NIC router used to handle each type of packet-stream signal with a distinct
method in the Interface class. However, merging those methods has advantages.
It ensures that sent packets that were already acknowledged by the counter side
are always released before handling received packets. This frees packet stream
memory which facilitates the potential allocation of response packets while
handling received packets. Furthermore, it simplifies the code and reduces the
number of entry points into the router.
This commit also removes the installation of signal handlers at packet streams
for events that are of no interest for the router (TX-ready-to-ack /
RX-ready-to-submit at NIC sessions and RX-ready-to-ack / TX-ready-to-submit at
Uplink sessions).
Fixes#4470
The driver falls in line with the previous 'legacy_wifi_drv' component
where the ported wireless LAN stack and device driver is encapsulated
in a library. This library in return is used by the 'Libc::Component'
providing the necessary environment for the 'wpa_supplicant'.
In constrast to the old driver a 'wifi' VFS plugin is in charge of
initalizing the 'Lx_kit::Env' prior to executing any static
constructors.
Fixes#4455.
Move 'linux-firmware' portion from 'dde_linux' into its own port,
while it is used by the upcoming new WLAN driver keep it in place
for the legacy one.
Issue #4455.
Various libraries, like libnl and wpa_driver_nl80211, used hardcoded
values for the interface index (ifindex) and name (ifname).
To accomdate the legacy as well as the upcoming new driver we add
functions to query these information where at least the index differs.
Issue #4455.
