This patch adds support for booting base-hw kernel on qemu-arm virt
machines. The arm_virt machine has 2GB of RAM, 2 Cortex A15 cores and
uses GICv2 interrupt controller. The arm_64_virt machine also has 2GB of
RAM, but has 4 Cortex A53 cores and uses GICv3. Both machines use PSCI
to boot additional CPU cores.
Fixes#3673
This patch fixes a regression with run/log_core introduced by
2064ffd64b nova: support multidimensional affinity space
The run tool uses a log message 'run_boot_string' to detect successful
boot as well as to detect unexpected reboots. This message should never
be logged twice and, thus, should not be part of the core_log. The patch
mentioned above moved the former run_boot_string after the core_log
initialization.
From the man page of expect:
> Both expect and interact will detect when the current process exits
> and implicitly do a close. But if you kill the process by, say, "exec
> kill $pid", you will need to explicitly call close.
Fixes#3569
Components like kernel, core, and bootstrap that are built for a
specific board need to reside inside the same architectural dependent
build directory. For instance there are sel4, foc, and hw kernel builds
for imx6q_sabrelite and imx7d_sabre, which have to reside inside the same
arm_v7 build directory.
This commit names those components explicitely, and adapts the run-tool to it.
Fix#3316
Until now, Genode referenced a fork of the outdated elfloader-tool
to enable bootstrapping of sel4 on ARM platforms. Because the
elfloader is inherently dependent on the used platforms newer
ARM versions supported by the kernel could not be loaded by the
outdated elfloader. This commit uses a fresh fork of the nowadays
used sel4_tools repository.
Ref #3251
The 'run_genode_until' procedure only called 'run_power_on' to reset
the target machine. That works will with the softreset module, which
is used by all x86-based test system but falls short regarding ARM
boards. The way those boards are connected requires turning the power
off and on for a complete cycle.
The plugin was tested with ALL4176 but should support all modern Allnet
MSR devices according to the documentation
https://service.allnet.de/image-ftp/ftp/pub/allnet/MSR/JSON/JSON_MSR.zip
It works just like the existing powerplug plugins by
RUN_OPT += --include power_on/allnet --include power_off/allnet
and uses the following parameters
--power-on-allnet-host network address of device
--power-on-allnet-user user for device
--power-on-allnet-password password for device
--power-on-allnet-port target port/socket of device
--power-off-allnet-host network address of device
--power-off-allnet-user user for device
--power-off-allnet-password password for device
--power-off-allnet-port target port/socket of device
* In base-foc/recipes/src/ replace base-foc with base-foc-pc
* To base-foc/recipes/src add base-foc-arndale, base-foc-pbxa9
* Ensure that the correct base-foc recipe is choosen by the run module
'boot_dir/foc'
* To base-hw/recipes/src add base-hw-arndale, base-hw-imx53_qsb,
base-hw-imx53_qsb_tz, base-hw-odroid_xu, base-hw-panda, base-hw-rpi,
base-hw-wand_quad
* Ensure that the correct base-hw recipe is choosen by the run module
'boot_dir/hw'
The new base/xsd/config.inc defines generic XSD types such as 'Boolean' or
'Session_label'. It can be included in config XSD files by using:
! <xs:include schemaLocation="file://${GENODE_CONFIG_INC}"/>
The string ${GENODE_CONFIG_INC} is replaced by the run tool with the
above mentionened file path.
Issue #2897
Also remove 'requires_installation_of', while also checking sbin
directories in 'have_installed'. The run scripts have been adjusted
accordingly.
Fixes#2853
Newer revisions of parted require special privileges due to use of the
dmidecode tool, which logs permission errors to standard error. In these
cases parted still succeeds with its operation, so just ignore the
jabbering and prevent expect to exit.
Issue #2778
The "create_grub2" script functionality is moved to the g2fg contrib sources
and also the GRUB2 head image (tool/grub2-head.img). The head image is now
partitioned as GPT and bootable in BIOS legacy mode.
Our static okl4 system-integration configuration specifies a fixed RAM
range from 32 to 800 MiB, which must be satisfied by Qemu or strange
errors happen due to accesses beyond RAM. (Fixes current issues with
nic_router.run.)
Switch port I/O based PCI config space access to memory-mapped IO. The
base address of the PCI configuration space is acquired by mapping the
ACPI ROM and reading the first <bdf> node. An exception is thrown if the
first <bdf> node is not for PCI domain zero or if multiple <bdf> nodes
exist. This is to reduce complexity and also because multiple PCI
domains are rare.
The PCI configuration space is accessed via I/O mem dataspace which is
created in the platform_drv root and then passed on to the PCI session,
device components and finally to the actual PCI config access instances.
The memory access code is implemented in a way to make it work with Muen
subject monitor (SM) device emulation and also general x86 targets. On
Muen, the simplified device emulation code (which works also for Linux)
always returns 0xffff in EAX to indicate a non-existing device.
Therefore, EAX is enforced in the assembly templates.
Fixes#2547
When a pkg is missing, the user should create <arch>/pkg instead
of only the missing pkg. This way, all depending binaries are created in
one step. Otherwise the missing binaries are detected at the next time
the run script is executed. This patch relieves the user from iterating
manually.
This commit changes the semantic of run_boot_dir to link a core
binary with debug symbols only when the designated library is in place.
Follow-up fix refering to issues #2339 and #2700
The install_pxe_bootloader_to_run_dir procedure is required by the tftp
as well as the ipxe load script. Move it to a separate file which is
include by both.
Apply the approach to join the argument list 'args' to pass a single
list argument to _collect_from_depot. Actually, this story teaches me to
shy away from {*} because of its special semantics, which are
{*} makes each item in a list an individual argument of the current
command (https://wiki.tcl.tk/17158)
This is a direct follow up to "run: let import_from_depot accept list
variables", which broke calling import_from_depot with a number of
individual arguments.
Issue #2619
When doing something like this in a run script ...
lappend arg X
lappend arg Y
lappend arg Z
import_from_depot arg
... the internals of import_from_depot do not treat $arg as list but as one
string and interprets it as malformed depot path. We can handle this by
applying {*} to $arg inside the procedure.
Issue #2619
This patch changes the depot layout such that each archive is
represented as a directory that contains the versions of the archive as
subdirectories.
Issue #2610
