In this case "mv A B" works slightly different than "cp A B; rm A" as
symbolic links come into play. The statements should copy the contents
of A into the symboliv link at B (preserving it as is) and remove A. The
mv would replace the link B by the binary A.
Fixes#805.
When using certain assembler instructions, e.g. 'smc' that are
only available on some CPUs of the same architecture like ARMv7a,
it's necessary to specify the target CPU for the assembler. Otherwise
it will complain about.
Use NATIVE MAX ADDRESS EXT to retrieve last block for LBA48. Also check not only
for enabled LBA48 support but for the 'host protected area' bit before using the
LBA48 version. This is because the high order byte (HOB) data retrieval is
broken in Qemu.
Fixes#761.
Split the netperf run script into 3 ones so that it can be used more easily
in an automated run.
It is solely for foc_arndale by now.
l4linux_netperf.run - use nic via usb2.0
l4linux_netperf-usb30.run - use nic via usb3.0
l4linux_netperf-bridge.run - use nic via usb3.0 + bridge
Split the netperf run script into 3 ones so that it can be used more easily
in an automated run.
netperf.run - use native nic driver (x86) or usb2.0 (arndale, panda)
netperf_usb30.run - use native nic driver (x86) or usb3.0
netperf_bridge.run - use native nic driver (x86) or usb3.0 (arndale) and bridge
Issue #794
- use the generic 'crt0.s' for Linux
- move the read-only '__dso_handle' definition into the '.text' section
- move the '__initial_sp' definition into the '.bss' section
- remove the '_main_utcb' definition
Part of #766.
Until now the print procedure call in the Log_session_component
did contain a hardcoded 'init' string. Adding a method to filter
the session args to prefix the label and labelling the initial
Cpu_connection for the init-process enabled us to remove the
hardcoded string.
Fixes#789.
The given number of bytes is consumed but not actually allocated. This
feature may be used for accounting and use memory within core which is
in fact provided by a session client.
Fixes#792.
* Always download md5sum file and check downloaded binaries
* Extend sleep time in l4linux_netperf script, so that DHCP has enough time
* Fix regexp rule in l4linux_netperf run script to work with MAC addresses
containing only numbers
Fix#787
Sometimes the ports are not freed up quick enough by the host system after the
first test finished. The port restriction is mainly required for qemu, so don't
use it for bare metal hardware tests.
* Add platform_drv for usb_drv, sd_card_drv and ahci
* Add ahci driver and part_blk on top of it
* add linux instance using SATA partition
* add VIM using SATA partition
