This commit updates lxip from version 4.4.3 to 6.1.20. It uses the
current lx_kit approach and is a shared library again. The stack has
been tested for x86_32/x86_64/arm_v6/arm_v7/arm_8.
The C-interface of the IP stack can be found under
lxip/include/genode_c_api/socket.h.
issue #5104
CONFIG_X86_USE_PPRO_CHECKSUM is a 'def_bool y' and gets re-enabled by
'make olddefconfig'. The PPRO version contains text relocations which we cannot
have in binaries (e.g., 'lea 45f(%ebx ...).').
issue #5104
add bottom half enable/disable to functions with suffix "_bh" were
missing, because some functions release the bottom half separately
(__neigh_event_send).
issue #5104
Add the possibility to execute a module-init call by name using
'lx_emul_init_call', this is used, for example, by lxip to configure and
re-configure the IP address through 'ip_auto_config'.
issue #5104
The classes Genode::Mmio, Genode::Register_set, Genode::Attached_mmio, and
Platform::Device::Mmio now receive a template parameter 'size_t SIZE'. In each
type that derives from one of these classes, it is now statically checked that
the range of each Genode::Register::Register- and
Genode::Register_set::Register_array-deriving sub-type is within [0..SIZE).
That said, SIZE is the minimum size of the memory region provided to the above
mentioned Mmio classes in order to avoid page faults or memory corruption when
accessing the registers and register arrays declared inside.
Note, that the range end of a register array is not the end of the last item
but the end of integer access that is used for accessing the last bit in the
last item.
The constructors of Genode::Mmio, Genode::Attached_mmio, and
Platform::Device::Mmio now receive an argument 'Byte_range_ptr range' that is
expected to be the range of the backing memory region. In each type that derives
from on of these classes, it is now dynamically checked that 'range.num_bytes
>= SIZE', thereby implementing the above mention protection against page faults
and memory corruption.
The rest of the commit adapts the code throughout the Genode Labs repositories
regarding the changes. Note that for that code inside Core, the commits mostly
uses a simplified approach by constructing MMIO objects with range
[base..base+SIZE) and not with a mapping- or specification-related range size.
This should be fixed in the future.
Furthermore, there are types that derive from an MMIO class but don't declare
any registers or register arrays (especially with Platform::Device::Mmio). In
this case SIZE is set to 0. This way, the parameters must be actively corrected
by someone who later wants to add registers or register arrays, plus the places
can be easily found by grep'ing for Mmio<0>.
Fix#4081
I2C EEPROMs of the type at24xxx are really slow (ca. 10 kHZ).
This adds the `bus_speed_khz` attribute to the config of the driver and
adapts the i.MX8 driver to support the feature.
Issue gapfruit#1996
Fixes genodelabs#5090
The physical address of the memory used for the guest VMCB is already
present in Vcpu_data. Use the information there instead of storing the
physical address in the host data area, thereby freeing up 8 bytes for
a bigger Mmio class.
Issue #4081
Hitting a BOSD in a Windows guest in Virtualbox 6 leads to calling
`DBGFR3ReportBugCheck`, which leads to the following error since it is
unimplemented in our port:
```
Error: DBGFR3ReportBugCheck: DBGFR3ReportBugCheck called, not implemented, eip=0x1a5c4e4
```
Including the actual method from Virtualbox 6 enables logging
diagnostics for the Windows Blue Screen of Death (BSOD).
To see Blue Screen logging output, enable "dbgf" and "gim" logging
via the `VBOX_LOG` following environment variable in the vbox6 runtime
config.
When manually triggering a BSOD in the Windows guest, this should
produce the following logging diagnostics:
```
GIM: HyperV: Guest indicates a fatal condition! P0=0xe2 P1=0x0 P2=0x0 P3=0x0 P4=0x0
GIMHv: BugCheck e2 {0, 0, 0, 0}
MANUALLY_INITIATED_CRASH
```
Fixes#5099
The libc's internal calculation of the tv_sec and tv_nsec fields must be
based on the same ms value. Otherwise, tv_sec is not always immediately
incremented whenever tv_nsec wraps. For applications, this inconsistency
can result in observed jumps in time.
Fixes#5098
Functions registered with 'module_init' (i.e., '__define_initcalls'),
'OF_DECLARE', and 'DECLARE_PCI_FIXUP_CLASS_FINAL' used to be static
constructors and had be explicitly registered using
'exec_static_constructors' before executing any Linux code.
With this commit we remove the constructor attributes from these
functions and create a global function pointer in the form of
__initptr_<name>_<id>_<counter>_<line number of macro>
'import-lx_emul_common.inc' will collect these '__initptr' symbols after
the compile step and generate a 'lx_emul_register_initcalls' function
that executes the functions pointed to. This step is now automatically
performed in 'lx_emul_start_kernel'. This way a call to
'exec_static_constructors' can be omitted in case there are no other
constructors in place.
issue #5096
The former implementation relied on input drvdata always pointing to
struct hid_device, which is not true for Wacom touch devices (at least).
Now, we implement the input handler for devices providing LEDs
(evbit[EV_LED] set) only and use input_inject_event() to set the LED
states.
This commit brings the etnaviv back end implementation in line
with the one from lima. Since the etnaviv driver itself handles
different contexts implicitly rather explicitly like lima and
iris for the moment only a main-context is used for all operations.
Issue genodelabs/genode-imx#8.
Uploading large files via HTTP PUT failed when the file system was
accessed via a file system session because lighttpd opened the
destination file with O_NONBLOCK and the write operation stalled
at some point.
genodelabs/genode#5093
These domains allow for the hosting of plain http and telnet servers
reachable from the outside. The change is designated for the goa
testbed.
Issue #5092
The commit is a preparation commit for suspend/resume. It prepares the GPU
structures relying on gmadr.cap() (MMIO) to be re-constructible by applying
the with* pattern to context, ring_buffer and ggtt mmio map. It removes
the managed dataspace handling of gmadr subsets to make the with_* pattern
possible.
Issue #5081
This commit is a preparation commit for suspend/resume. The commit
refactors the code in order to consolidate all Platform resources into one
instance. All users within the GPU driver should access the resources with
with_* functions, which checks whether the device resource is usable. The
callers are not allowed to store any references to the provided resources.
With this change, it will be possible in follow up commits, to release
the platform device and to re-acquire it and its resources, e.g. mmio, irq,
gmadr.
Issue #5081
- add PS/2 input drivers
- add GPU client test case - glmark2
- remove display driver before suspend
- route log output via terminal on display to gather information, since in
most cases serial/AMT is not available after ACPI resume
Issue #5081
Clearing very large RAM dataspaces could fill up core's page table,
because the dataspaces are locally mapped to clear them.
This would manifest in a loop where exhausting the local page table
leads to its flushing (which does not work for core) and a retry that
again fills up the page table and so on.
To prevent this, flush RAM dataspaces in chunks of at most 128MiB.
Fixes#5086
If "verbose" is set to true in the config, AcpiOsPrintf etc. are enabled
to log to a dedicated LOG session using the Format:Console utility.
Issue #5083
Prevent errors if precision and left alignment are part of the string.
String precision is applied to limit access to the configured number of
characters but ignored for other types.
Issue #5083
The axis IDs correspond to 2x analog sticks with 2 axes and 2x triggers.
While being at it, the commit changes the Axis_id type to Axis::Id.
Fixes#3669
Failed allocations were still denoted with a successful return value
to the caller. This situation was triggered by artificial testing and
has not been observed yet in practice. In case the 'LIMA_GEM_CREATE'
I/O control fails Mesa will dereference invalid pointers anyway.
Issue genodelabs/genode-allwinner#27.
The frame-pointer-based backtrace does not work without enabling
-fno-omit-frame-pointer explicitly and in most cases leads to page
faults because non-pointer stack values are dereferenced during the
walk. The best we can do is to limit the backtrace walk to the stack of
the current thread to prevent page faults unrelated to the system state
without the use of the backtrace utility.
This commit introduces a printable Backtrace class usable in
Genode::log(), Genode::trace(), etc. The class is based on the new
function for_each_return_address(auto const &fn) that walks the stack in
its limits and calls fn() for each discovered return address on the
stack in the new os/include/os/backtrace.h. Archtecture-specific
stack-pointer retrieval and walk loops are implemented in dedicated
os/include/spec/<arch>/os/for_each_return_address.h files. Also, the
well-known Genode::backtrace() function (which logs the return-address
values) is provided for backwards compatibility.
Fixes#5078
The number of hash entries for TCP/UDP corresponds to the number of
sockets managed by the stack. In case there are more sockets than
entries available, buckets will be created to compensate for the lack of
space. The default values for TCP (524288) and UDP (65536) are meant for
the in kernel that manages all sockets of the user land and leads
to very large hash table allocations (>20MB) during initialization.
Since on Genode a component has its own instance of the IP stack or uses
the VFS server, we do not need these kind of large default settings.
issue #2181
This patch changes the unlink operation of the ram fs to defer the
destruction of a file until it is no longer referenced by any VFS handle.
When unlinked, the file no longer appears in the directory. But it can
still be opened and accessed.
With this change, a parent process of a Unix-like subsystem becomes able
to pass the content of an unlinked file to a forked child process. This
mechanism is required when using the 'exec' command in Tcl scripts.
Another use case is the 'tmpfile()' function.
Fixes#3577
The traced top instance was configured to be active every two seconds
whereas the trace test uses a grace time of only 1.5 seconds before
raising the FOREIGN state of a trace subject as an error.
The state of a trace subject can change only whenever the traced thread
passes a trace point. Hence, with the original configuration, the
release of top as trace subject can take up to two seconds. The patch
reduces the rate to 0.5 seconds to satisfy the expectation of
test-trace.
Following Github support removal for svn [1], dde_rump port fails to
prepare. This commit introduces a new install rule for ports,
'.sparse-git'. It performs a sparse-checkout on the port repository, only
fetching required files.
[1] https://github.blog/2023-01-20-sunsetting-subversion-support/
Co-authored-by: Benjamin Lamowski <benjamin.lamowski@genode-labs.com>
Issue genodelabs#5072
Issue genodelabs/goa#28
According to RFC 1812 ICMP Destination unreachable (Network unreachable)
does not quite our case of clients directly behind the router.
If a packet is to be forwarded to a host on a network that is directly
connected to the router (i.e., the router is the last-hop router) and
the router has ascertained that there is no path to the destination
host then the router MUST generate a Destination Unreachable, Code 1
(Host Unreachable) ICMP message.
Issue #4729
By using `mktime()`, which assumes local time, we render the `TZ`
environment variable ineffective. Instead, `timegm()` should be used to
set the real-time clock to UTC.
genodelabs/genode#5074
The management of Linux page structs is now tied to the life time of DMA
buffers. Thus, page structs are created when a buffer is allocated and
deallocated only when a buffer is freed - not on lx_emul_mem_free()
because DMA buffers are cached. Page struct refcounting was entirely
reworked in lx_emul/shadow/mm/page_alloc.c.
Fixes#4809
When multiple threads (EMT-0..X + nic_ep) enter the very same
critical section, the use of RTCritSectTryEnter may reflect the contention
case to the Network Model (E1000). Since no one notifies the model, when the
critical section is free again, solely the next packet/event triggered by the
guest will resume the former operation. This may lead to long delays until
packets are sent actually.
Instead of using the RTCritSectTryEnter use RTCritSecEnter to avoid the
situation. All of our network code is non blocking, so the network backend
will only be contented a short time.
Follow up commit to
Issue #5045
The devio API in the Linux kernel promised to be a stable layer for our
USB host controller drivers, but the additional bookkeeping and dynamic
allocations increase CPU overhead in a way that we do not accept further.
Therefore, we go a step back and process DMA transactions directly in and
out of the packet stream from the clients.
Fixgenodelabs/genode#5071
Per default Tslab checks that 8 slabs incl. overhead fit into one block.
If this is not desired the template parameter 'MIN_SLABS_PER_BLOCK' can
be used to control the minimum number of blocks.
Fixes#3834
