from configure rather than substitute it from Makefile. Eventually we
might want to get rid of configure.in completely, doing on-the-fly
checks at the time of `ct-ng build`, but that is left for another day.
Signed-off-by: Alexey Neyman <stilor@att.net>
configure.ac now finds how to count the CPUs in a system. Currently
the getconf method and sysctl methods are supported. Adding more is
easy enough.
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
After much struggling with macos (BSD) sed and even getting everything
work in crosstool-ng itself, I had to abandon that because some
components rely on GNU syntax. Specifically, GNU libc uses '/.../{H;g}'
(note absense of the separator after 'g').
So, revert the -r/-E detection and check for sed's being of GNU origin.
MacOS people, sorry, but you'd have to install GNU sed.
Signed-off-by: Alexey Neyman <stilor@att.net>
... and then use the right option. See the note in scripts/functions
on where we should use ${foo} and where just 'foo'; this boils down to
whether we can expect the build tools override to be in effect (e.g. in
the actual build scripts) or not (i.e. outside of scripts/build).
While running in scripts/functions, or in scripts/crosstool-NG.sh the
build tools override directory (.build/tools/bin) may have not been
set up (yet, or at all).
Also, modify the installed scripts (populate, xldd) accordingly.
Signed-off-by: Alexey Neyman <stilor@att.net>
Rather than requiring them of a certain version, detect if they are present
(and have sufficient version) and select an appropriate companion tool
otherwise. The reason is that, for example, most recent gettext requires
automake 1.15, but the newest available CentOS has 1.13. Hence, the option
to "upgrade your system" does not apply, and the warning comment above
the companion tools is rather scary.
With this approach, it will work out of the box - either by using the host's
tools, or by building them as needed. Note that the user can still change
the setting in the config.
While there, propagate the new version checking macro to awk/bash/host binutils,
and switch from --with-foo=xxx to officially blessed FOO=xxx: the latter
does not require checking for bogus values (i.e., --with-foo, --without-foo)
and AC_PROG_* macros recognize the corresponding settings without further
modifications. For now, I kept --with-foo=, if only to complain and steer
people to the new way. To be cleaned up after a release.
Signed-off-by: Alexey Neyman <stilor@att.net>
Makes them sorted out by host, and removes the need for similar hack in
samples.mk.
Change how canadian crosses are named: using `=' character resulted in
Glibc build failure.
Move loading config into a common function, CT_LoadConfig.
Signed-off-by: Alexey Neyman <stilor@att.net>
Currently the broken file is not installed when doing an non-local install.
This causes ct-ng list-samples to not notify the user that a sample is
broken. This commit triggers the creation of the broken file as needed.
Signed-off-by: Yogesh Sharma <ysharm01@harris.com>
`make uninstall` is ran against `$(TARGETS)`, which includes `lib-kconfig`.
`lib-kconfig` is installed as a part of the `lib` target, so during
uninstall, removing `lib` is enough to also remove `lib-kconfig`.
Filter out `lib-kconfig` during `real-uninstall`.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
I was going to start doing some autoconf work, and noticed that
configure.in was executable. Then I noticed Makefile.in was executable.
o.O
So, I ran ```find . -type f -executable``` and found a bunch of files
that shouldn't be set executable.
This commit makes them normal files again.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This commit introduces a configure time option to let the build know
that this is going to be an automated build.
This forces the build to disable the progress bar, log tool warnings,
and force the log level to debug.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
On OS X, Apple supply an old gperf (3.0.3) with xcode and
xcode commandline tools which causes build failures:
./zconf.hash.c:183:17: error: expected expression
{offsetof(struct kconf_id_strings_t, kconf_id_strings_str2),
.. upgrading to gperf 3.0.4 was sufficient to fix this,
so this option allows the user to specify the gperf
program that they wish to use.
To install gperf 3.0.4 from homebrew, I did:
brew tap homebrew/dupes
brew install homebrew/dupes/gperf
.. then passed --with-gperf=$BREWFIX/Cellar/gperf/3.0.4/bin/gperf
to configure
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
Message-Id: <CAOYw7dtCmcJ9WiqmQ81MmZeRPcV-tDOqe9=kRDW4uQGuZNd2Ng@mail.gmail.com>
Patchwork-Id: 274892
-R and -r (-Rr) can be reordered to -r and -R (-rR).
This happens with MSYS1/2 gnu-make and mingw32-make,
and triggers "Recursion detected, bailing out..."
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
Message-Id: <CAOYw7dsdsg-XaDOwwEWJeUUSo2Vu_UD5GtkSgNTu59ai7yx0cQ@mail.gmail.com>
Patchwork-Id: 258027
Currently, we would remove previously installed patches before
installing the new ones. Unfortunately, that does not play well
with heavily parallel installs.
Now, we consider it is the responsibility of the user to first
uninstall any previous version before installing a new one.
Reported-by: Markos Chandras <markos.chandras@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Don't use options specific to FSF's coreutils install.
Signed-off-by: Titus von Boxberg <titus@v9g.de>
Message-Id: <51587db99510a9ec08f8.1352226968@tschetwerikow.boxberg.lan>
Patchwork-Id: 197532
We need just 'grep', and we need to be able to call it with 'grep -E'.
Check for 'grep', and bailout if egrep != grep -E
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The tools found by the new autostuff configure can contain arguments,
for example: grep -E
This needs separating the paths set for the Makfile from the paths
set for the scripts.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The kconfig frontends are currently instaleld as source files. This is
a remnant of the early times, when I wanted a single installation of
crosstool-NG to be shared across multiple machines, potentially of
different architectures.
This does not really make sense, and it's been a long time since it
was las tpossible in practice.
So, just build the kconfig frontends at make-time, and install them
as we do for all other crosstool-NG dependent files.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Create configure.ac, an autoconf script to generate ./configure
This will be needed by a subsequent patch to properly handle
--build and --host, and more tests, when the kconfig stuff will
be installed pre-built.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add 'build', 'build-*', and 'install' as phony targets to the top level
Makefile.
I tend to do everything in tree with the build in a directory called
'build'. This interfered with the target 'build', making it think the
target was up to date, and stopping scripts/crosstool-NG.sh from being
regenerated.
Added 'install' as I often set the prefix to $PWD/install.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
libtoolize must be checked_for and there needs to be a wrapper
that points to GNU libtoolize since that may be installed
as glibtoolize.
This fixes a problem with building Cloog/PPL that was
Reported-by: "Pierrick Brossin" <pierrick@bs-network.net>
Signed-off-by: "Titus von Boxberg" <titus@v9g.de>
With the upcomming --program-{prefix,suffix,transform-name} options,
we'll have a need to centralise the actual executable name, that is
now no longer be a constant.
Rather than spread the prefix/suffix through-out the code, just
centralise the name setting in one place. Beside, transform-name
would not be possible without setting the name at a single location.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Installing samples was not installing the C library config file
and the reported.by description.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The latest autocompletion calls 'make -qp' to get all the possible
targets. This currently fails, as our makefile is calling itself
again and again ad-libitum.
Fix it by detecting that the recursion level is not 0, and bail out
if so. It works so well that it has the side effect of showing only
the 'public' target, and hide our internal ones! :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
If check_for is able to find the required prog/inc/lib, allow it to
set an arbitrary variable to 'y'. This variable is then pushed down
to the kconfig definition.
For example:
has_or_abort prog=foobar kconfig=has_foobar
If foobar is available, it yields a kconfig variable defaulting to y:
config CONFIGURE_has_foobar
bool
default y
If foobar is missing, it yields a kconfig variable defaulting to n:
config CONFIGURE_has_foobar
bool
Thus it is possible to depends on that variabel to show/hide options:
config SOME_FEATURE
bool
prompt "Some feature"
depends on CONFIGURE_has_foobar
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
It's been a while now that the working directory CT_WORK_DIR has
been changed from 'targets' to '.build'. Fix the install procedure
to properly tweak the installed samples.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The overview.txt file has evolved into more than just an overview.
Split it into chapters, and include the misc tutorials.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
- don't list samples in the main help screen
- improve the samples listing in list-samples
- don't document the 'config' action, it's long dead
- document the 'V' environment variable
- improve on START, STOP and PREFIX environment variables
- add PREFIX and V to autocomplete
- advertise auto-complete at install time
