This fixes following build error on Debian 9:
configure: error: Your local docbook2man was found to work with SGML rather
than XML. Please install docbook2X and use variable DOCBOOK_TO_MAN to point
configure to command docbook2x-man of docbook2X.
Or use DOCBOOK_TO_MAN="xmlto man --skip-validation" if you have xmlto around.
You can also configure using --without-docbook if you can do without a man
page for xmlwf.
Signed-off-by: Bernhard Walle <bernhard@bwalle.de>
uClibc-ng 1.0.31 enabled FDPIC as an option for ARM/no-MMU
configurations and defaults to that option if not set explicitly.
Signed-off-by: Alexey Neyman <stilor@att.net>
... in the backend function with ${CFLAGS_FOR_HOST}. The caller either
supplies them already, or (in case of pass-1/2 of the canadian cross)
passes ${CFLAGS_FOR_BUILD} there.
Signed-off-by: Alexey Neyman <stilor@att.net>
Otherwise, glibc 2.29 tries to use it - but we haven't built libstdc++ yet.
We really need to implement #808... Until now, pass empty CXX to make.
Signed-off-by: Alexey Neyman <stilor@att.net>
... which, after a recent change, is not reflected into CT_ALL_TARGET_CFLAGS
for non-multilib configurations.
Signed-off-by: Alexey Neyman <stilor@att.net>
... parts of the config tuple. While here, remove parts that are
setting portions of the target tuple to a value that's already
the default.
Signed-off-by: Alexey Neyman <stilor@att.net>
... in uClibc and glibc.
Fixes#681.
While here, relocate additional "sources" for uClibc/binutils into packages/
directory.
Signed-off-by: Alexey Neyman <stilor@att.net>
This required some rework of the libc selection, as moxiebox is a layer on
top of another libc - newlib.
Also, moxiebox'es host VM (`sandbox`) needs a libcrypto on the host. We will
not have it if we're cross-compiling a canadian cross. Fortunately, all moxiebox
needs from libcrypto is SHA256, and it already includes a standalone implementation
of SHA256 in its runtime. Provide a little wrapper that allows moxiebox use
that implementation for the host binary, too.
Also, automate collecting/printing the list of all packages in a given category
(e.g. LIBC or COMP_TOOLS), generate a list of all Kconfig symbols for a given
category.
Signed-off-by: Alexey Neyman <stilor@att.net>
... and use that ability to permanently set CTNG_LD_IS in case gold is default linker
and we're building glibc.
Fixes#988. This was a long-standing breakage in crosstool-NG (at least since it began
to run each step in a sub-shell).
Signed-off-by: Alexey Neyman <stilor@att.net>
There is a subtle difference when executable bit is a part of the umask.
And at least some versions (Debian/stretch) fail if the resulting mode
would've been different if not for the umask setting.
Fixes#998.
Although, with such chmods/umasks it is likely that some package installation
will break anyway. But I'll leave it until somebody complains.
Signed-off-by: Alexey Neyman <stilor@att.net>
Modify CT_TARGET_CFLAGS (which are passed to GCC's FOR_TARGET flags) rather
than CT_ALL_TARGET_CFLAGS.
Fixes#1006.
Signed-off-by: Alexey Neyman <stilor@att.net>
They're written in ARM dialect, and `ldmia r14, {r14, pc}` is not accepted in T2
encoding. GCC8 changed the list of multilibs for arm-*, which now includes a
variant with CPU that supports T2 but not A1 encoding.
Signed-off-by: Alexey Neyman <stilor@att.net>
In case we build for ARC core which has no support of atomic ops among
other things we need to configure libc to use Linux kernel helper to emulate
HS atomic ops. This is done with disabling of CONFIG_ARC_HAS_ATOMICS in uClibc.
Currently we __remove__ this option from .config but this makes no sense as
its default state is "y" so we need to explicitly disable it instead.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Synopsys' DesignWare ARC Processors are a family of 32-bit CPUs
that SoC designers can optimize for a wide range of uses,
from deeply embedded to high-performance host applications in a variety
of market segments.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
- Incompatible function type for ifunc alias
- Multiple statements macro expansion in strftime
- if_nametoindex size checking
Signed-off-by: Alexey Neyman <stilor@att.net>
... in the corresponding /lib directory. Mingw-w64 installs it to /bin,
so multiple variants in a multilib configuration override each other.
Signed-off-by: Alexey Neyman <stilor@att.net>
... which now defaults to --enable-mpers=yes, which attempts to
invoke aarch64-*-gcc with -m32 and fails.
Signed-off-by: Alexey Neyman <stilor@att.net>
This fixes gccs LIMITS_H_TEST detection for baremetal targets
so limits.h will be installed correctly.
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
- Update to 20180129
- Throw in --disable-db-install if database is disabled; otherwise
'make install' tries to run tic which is not built.
- Select appropriate strip utility for the host; otherwise non-x86
architectures fail to install (unless --disable-stripping is also
added)
Signed-off-by: Alexey Neyman <stilor@att.net>
These changes mainly fix static linking errors when building static
native gdb and gdbserver (tested with gcc 7.2.0 + uClibc-ng 1.0.27 +
binutils 2.29.1 for MIPS):
[ALL ] .../lib/libstdc++.a(eh_throw.o): In function `__cxa_throw':
[ALL ] (.text.__cxa_throw+0x64): undefined reference to `_Unwind_RaiseException'
[ALL ] (.text.__cxa_throw+0x6c): undefined reference to `_Unwind_RaiseException'
[ALL ] .../lib/libstdc++.a(eh_throw.o): In function `__cxa_rethrow':
[ALL ] (.text.__cxa_rethrow+0x78): undefined reference to `_Unwind_Resume_or_Rethrow'
[ALL ] (.text.__cxa_rethrow+0x80): undefined reference to `_Unwind_Resume_or_Rethrow'
...
The problem is in mixing of CPP, CC, CXX, and LD with CPPFLAGS, CFLAGS,
CXXFLAGS, and LDFLAGS before passing to configure scripts.
gcc is sensitive to argument order and the scripts are normally responsible
to combine the variables in a proper way.
Signed-off-by: Sergey Korolev <s.korolev@ndmsystems.com>
... when using musl to compile strace.
Also, honor CT_TARGET_CFLAGS in scripts compiling target libs/binaries.
Signed-off-by: Alexey Neyman <stilor@att.net>
- Glibc configure args and tuple need adjustment on SuperH
- Only allow "both endian" and "with CPU" for unspecified arch
variant. May reconsider endianness (was breaking things before
adjusting glibc tuple)
- Retire non-multilib sample, it should be a subset of the
multilib one now.
Signed-off-by: Alexey Neyman <stilor@att.net>
1. On SuperH, configuring GCC with explicit variant of the CPU
(like "sh4") limits the default set of multilibs to just that CPU
and requires --with-multilib-list to change. Allow for "unspecified"
variant, so that we can defer to GCC to determine the list.
2. Support toolchains with both endiannesses at the same time.
3. Add a SuperH/newlib sample
4. Add more flags processing for uClibc
Signed-off-by: Alexey Neyman <stilor@att.net>
Some users (like myself) may want to omit the crosstool-NG version
from the binaries' versioning output, as it can be incredibly long
and not too helpful. Add a config option to disable it. The possible
combinations are as follows:
- crosstool-NG version (default)
- crosstool-NG version - custom toolchain ID
- Custom toolchain ID
- No crosstool-NG version OR custom toolchain ID
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
While here, also consider patched by anything other than "bundled patches"
as per-target sources. Add scary warnings in case of a failure.
Signed-off-by: Alexey Neyman <stilor@att.net>
... because there the symbols were constructer part by part.
Also, remove cc.sh and source $(CT_CC).sh directly - we only build
a single compiler at a time.
Signed-off-by: Alexey Neyman <stilor@att.net>
It fails to compile with the only locale version available (030818)
(on master too, with exactly the same error).
uClibc-ng does not use pregenerated locales.
Signed-off-by: Alexey Neyman <stilor@att.net>
- Need GDB8.0 milestone
- Make uClibc "master" package
- Rename bionic -> android-ndk to match the package name and
support suffixes for archives
Signed-off-by: Alexey Neyman <stilor@att.net>
Must have eabi suffix for GCC to accept it. Also:
- We only have one glibc now, no need to account for eglibc.
- Rename aarch64 samples, eabi suffix does not apply to them
(and ct-ng saveconfig was saving them into a different directory).
Fixes#772.
Signed-off-by: Alexey Neyman <stilor@att.net>
- Update .gitignore, do not place .gitignore into directories installed
in bulk
- Remove executable permissions and shebangs from the scripts that are
supposed to be invoked only via ct-ng frontent; prepend them with $(bash).
Despite what showSamples.sh said, it already has some bashisms.
- Remove --with autotools-dev and override dh_update_autotools_config
to avoid having config.{sub,guess} clobbered with older versions
- Install bash completion where Debian (now) expects it
- Update man page to use .\" as the comment delimiter, instead of
undefined macro (."); also, minor text edits.
- Install kconfig.mk without execute permission.
- Remove shell wrappers from 170-localedef-fix-trampoline.patch, we
do not use that for applying patches
- Revoke execute permissions on 210-expat.sh
- Get flags from dpkg-buildflags if available
Signed-off-by: Alexey Neyman <stilor@att.net>
Make this behavior default in case the core gcc backend is used
for final compiler (i.e., for baremetal configurations). Not
setting this option breaks canadian baremetal configurations,
and not setting it makes little sense at all in any baremetal
configuration (since in baremetal we don't have any libc to begin
with).
Signed-off-by: Alexey Neyman <stilor@att.net>
zlib refuses to run configure with mingw32 host and insists that
win32/Makefile.gcc is used instead.
This requires a change in this Makefile to support static-only builds.
Fixes#694.
Signed-off-by: Alexey Neyman <stilor@att.net>
The generated sysnum.h is different for o32/n32/64 ABIs.
This needs to be revisited; either do this for all architecutres or
perhaps, compare the headers for various multilibs and combine them
if the are identical.
Signed-off-by: Alexey Neyman <stilor@att.net>
Building with CT_MINGW_TOOLS unset before this change produces:
/usr/local/ct-ng/lib/crosstool-ng-1.23.0-rc2/scripts/build/libc/mingw.sh: line 212: [: =: unary operator expected
Check for python2/python3 and if found, pass them to --with-python.
Allow user to override the choice via a new config option. This
fixes systems where there is no "python", only "python2" or "python3".
Signed-off-by: Alexey Neyman <stilor@att.net>
If the build machine lacks tic, we need to build it in the first pass
even if host==build: ncurses Makefiles are not smart enough to build
'tic' first and use the just-built tic to compile fallback terminfo.
Signed-off-by: Alexey Neyman <stilor@att.net>
On cygwin, creating both "foo.exe" and "foo" results in 'ln -sf'
returning an error ("File exists"). However, ln silently removes
the "foo.exe" in this case, so an attempt to re-run the same command
manually then succeeds.
Hence, make binutils.sh also create symlinks with .exe prefix,
using the new & shiny routine.
Signed-off-by: Alexey Neyman <stilor@att.net>
- libpthread requires iteration over multilibs, unlike the core, it
does not detect and build multilibs by itself.
- Disable parallel builds for mingw-w64 components; until mingw-w64 core
builds clean, I am not trusting it.
- Make the list of tools to build configurable
- Turn on multilib in x86_64 sample.
- Make warnings about tuple less redundant. As in, "one WARN is enough,
no need to shout it three times".
- Messages about various steps/substeps are more aligned with the rest
of the components.
- Use 'make' instead of ${make} to invoke the companion make just built,
if applicable.
Signed-off-by: Alexey Neyman <stilor@att.net>
(see the comments in the code for details on the issue)
Old workaround in 100-gcc.sh stopped working (probably, due to one
of GCC version upgrades), so switch to the other approach originally
described there: adjust the list of multilibs to not include the
default target explicitly.
Signed-off-by: Alexey Neyman <stilor@att.net>
... enabled by default for multilib and disabled otherwise. Buildroot
has been complaining about /etc/ld.so.conf presence for almost a year
now and I missed that.
After the release, xldd will be modified to query the compiler for
the list of multilibs to search. This would be too invasive change
before 1.23, though.
Note that it may lead to configurations where xldd currently does not
find the libraries (if both DEMULTILIB and CREATE_LDSO_CONF are turned
off). This is not the default setting in Kconfig, though.
Signed-off-by: Alexey Neyman <stilor@att.net>
It turns out buildroot does not currently accept a toolchain where a dynamic
linker does not reside in the multi-os-directory. Unfortunately this is
how glibc installs itself on AArch64 without any extra tricks.
So, provide an option to force everything into /lib or /usr/lib; patch to
buildroot will be worked on separately.
Signed-off-by: Alexey Neyman <stilor@att.net>
Also a fix for CT_IterateMultilibs: it didn't pass multi_os_dir_gcc, so
it only worked if the caller did *not* declare it as a local variable.
Signed-off-by: Alexey Neyman <stilor@att.net>
Convert absolute targets to relative so that they are valid on the host,
too. The procedure is very similar to uclibc, so it is moved into a
common function.
Signed-off-by: Alexey Neyman <stilor@att.net>
... and in addition to final toolchain aliasing, use it when configuring
multilibs for glibc/musl. Note that uClibc does not need it, it is
explicitly selecting the tools using CROSS_PREFIX.
Signed-off-by: Alexey Neyman <stilor@att.net>
make's configure uses pkg-config to detect if Guile should be enabled;
on ArchLinux, this picks up Guile from build machine's pkgconfig and then
it fails to compile.
A better solution might be to create a ${CT_HOST}-pkg-config in
buildtools/bin that would report "unsupported" for all packages.
However a quick grep only showed pkg-config being used by GCJ
(not sure if it will build in canadian cross - we don't have any
samples with GCJ) and Blackfin simulator in GDB (Blackfin is not
currently supported by crosstool-ng). Hence, leave such pkg-config
implementation and testing for another day.
Signed-off-by: Alexey Neyman <stilor@att.net>
It picks up gettext string and results in [ERROR] messages from ct-ng
when gettext strings happen inside an error() call.
Signed-off-by: Alexey Neyman <stilor@att.net>
--enable-hacker-mode is not sufficient, in 2.25 configure then
fails while checking for sysdeps fragments that apply to a given
configuration, and with that worked around, fails on binutils &
compiler version check.
In brief: if someone wants locales on cygwin/macos, you'd have to
implement cross-localedef (similar to cross-rpcgen) in glibc and
submit it upstream.
Signed-off-by: Alexey Neyman <stilor@att.net>
The latter does not prevent zlib's configure from overriding 'AR' with
/usr/bin/libtool on macos, and that breaks canadian crosses.
Signed-off-by: Alexey Neyman <stilor@att.net>
GMP's configure script tries to be too smart, and if it determines
that it's not cross-compiling it chooses gcc or cc instead of the
wrapper we create at the start of the build.
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
If glibc's configure finds the host c++ executable it assumes that
c++ should be enabled for the build. In case we don't have cross g++
built yet (ie, for headers), this causes the build to fail creating
C++ headers. So hide C++ from the build.
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
After much struggling with macos (BSD) sed and even getting everything
work in crosstool-ng itself, I had to abandon that because some
components rely on GNU syntax. Specifically, GNU libc uses '/.../{H;g}'
(note absense of the separator after 'g').
So, revert the -r/-E detection and check for sed's being of GNU origin.
MacOS people, sorry, but you'd have to install GNU sed.
Signed-off-by: Alexey Neyman <stilor@att.net>
The -lcygwin -lc actually breaks the build: elf2flt picks up the symbols for getopt/optarg via
<getopt.h> in binutils-X.Y/include, where optarg is declared without dllimport attribute.
Therefore it pulls in getopt() from libc/libcygwin, but since optarg is not prefixed with
_imp__, it is pulled from libiberty. But the object file in libiberty also contains getopt()
thus resulting in multiple definitions thereof.
While there, kill extraneous -ldl passed into configure - configure detects -ldl successfully.
Upstream: https://github.com/uclinux-dev/elf2flt/pull/6
Signed-off-by: Alexey Neyman <stilor@att.net>
Adding new tristate configuration for TLS (Thread Local Storage) to
add "--enable-tls" (y), "--disable-tls" (n) or nothing (m).
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Loading a dynamic library (LTO plugin) from a static binary fails
on ArchLinux. It is also prone to break if a system is ever upgraded.
Also, disable plugins if not enabled explicitly.
Signed-off-by: Alexey Neyman <stilor@att.net>
... and then use the right option. See the note in scripts/functions
on where we should use ${foo} and where just 'foo'; this boils down to
whether we can expect the build tools override to be in effect (e.g. in
the actual build scripts) or not (i.e. outside of scripts/build).
While running in scripts/functions, or in scripts/crosstool-NG.sh the
build tools override directory (.build/tools/bin) may have not been
set up (yet, or at all).
Also, modify the installed scripts (populate, xldd) accordingly.
Signed-off-by: Alexey Neyman <stilor@att.net>
... it is not needed to install headers and causes build failures
in more than one setup (cygwin, macos).
Signed-off-by: Alexey Neyman <stilor@att.net>
... when building native GDB/gdbserver.
Suggested by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Alexey Neyman <stilor@att.net>
If GDB is turned off, the script will not be even sourced. Otherwise,
if GDB checkbox is set but none of the cross/native/gdbserver are
selected, debug.sh gives a bogus error message.
Signed-off-by: Alexey Neyman <stilor@att.net>
CT_TARGET is composed as "${CT_ARCH}${CT_ARCH_SUFFIX}", so CT_TARGET may
become something like "armv7", for example. This is used by the configure
script to set the "CPU" variable in the Makefile, leading to a commad line
containing
-DTARGET_armv7 -DTARGET_CPU="armv7"
In this case the compilation of elf2flt.c fails with "Don't know how to
support your CPU architecture??". Passsing "CPU=${CT_ARCH}" in the make
command line overrides the configured value and solves the problem.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
- Allow user to specify configure arguments to pass through to host/target
ncurses.
- Checkbox for --disable-database
- String option for --with-fallbacks
Signed-off-by: Alexey Neyman <stilor@att.net>
instead of 'make oldconfig' and responding 'y'. This avoids 'Broken pipe'
errors in the log, as well as selects default setting for all options not
explicitly set.
This requires a small fix in the old uClibc. Won't have to maintain that fix
for long though :)
Signed-off-by: Alexey Neyman <stilor@att.net>
This serves two purposes:
- installs its manpage
- installs headers, without them it does not make sense to install a
static library
Unfortunately, there's no way to select shared-only build of DUMA.
Hence, disable selection for static library.
Also, allow user to select whether to use stock or ct-ng's wrapper.
Signed-off-by: Alexey Neyman <stilor@att.net>
Rather than requiring them of a certain version, detect if they are present
(and have sufficient version) and select an appropriate companion tool
otherwise. The reason is that, for example, most recent gettext requires
automake 1.15, but the newest available CentOS has 1.13. Hence, the option
to "upgrade your system" does not apply, and the warning comment above
the companion tools is rather scary.
With this approach, it will work out of the box - either by using the host's
tools, or by building them as needed. Note that the user can still change
the setting in the config.
While there, propagate the new version checking macro to awk/bash/host binutils,
and switch from --with-foo=xxx to officially blessed FOO=xxx: the latter
does not require checking for bogus values (i.e., --with-foo, --without-foo)
and AC_PROG_* macros recognize the corresponding settings without further
modifications. For now, I kept --with-foo=, if only to complain and steer
people to the new way. To be cleaned up after a release.
Signed-off-by: Alexey Neyman <stilor@att.net>
So that uClibc config can be matched to Buildroot's expectations via
the menu, without the need for a saved config.
Signed-off-by: Alexey Neyman <stilor@att.net>
There are some useful tools such as widl, gendef, genidl ... etc.
provided by mingw-w64 and do not waste the developers' works.
Signed-off-by: Li-Hang Lin <lihang.lin@gmail.com>
The correct solution was checked in to strace GIT; will be part of the
next release. Backport patch to 4.10..4.15, and remove the workaround
from 500-strace.sh. Versions 4.9 and older should build fine even
without the workaround (they would be picking up wrong definitions,
but they need different patch and I don't feel like spending any time
on these versions).
Signed-off-by: Alexey Neyman <stilor@att.net>
And never had, at least since newlib 1.17 (first version added to
crosstool-ng). Apparently, copy-pasted from glibc.sh.
Signed-off-by: Alexey Neyman <stilor@att.net>
