Rather than echo-ing the new value, set the value into the variable with
the name passed as an argument (similar to CT_SanitizeVarDir). This
allows to use CT_DoLog in these functions.
Signed-off-by: Alexey Neyman <stilor@att.net>
This step was only used in uClibc. However, with upcoming multilib, the
config management will have to be done for each variant differently,
anyway.
uClibc was the only user of libc_check_config step, as well as
CT_CONFIG_DIR directory. Retire these.
Two other clean-ups in uClibc.sh:
- KERNEL_HEADERS check seems to be bogus, this config option is not
present even in 0.9.30 - which is not supported already.
- SHARED_LIB_LOADER_PREFIX was renamed to MULTILIB_DIR in 0.9.31,
according to ChangeLog - and MULTILIB_DIR is passed from command line
instead.
Signed-off-by: Alexey Neyman <stilor@att.net>
i[34567]86-*-gnux32 is not a valid tuple.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: Ray Donnelly <ray.donnelly@gmail.com>
Signed-off-by: Alexey Neyman <stilor@att.net>
This code was abstracted out of Cody P Schafer's multilib patch.
It doesn't seem right having architecture dependent code in a
specific libc implementation script. So this patch breaks it out into
scripts/build/arch/<arch>.sh in a function:
multilib_target_to_build="$(CT_DoArchMultilibTarget 'multi_flags'
'target-in')"
Note that this function gets called on each multilib variant with
different sets of compiler flags supplied in 'multi_flags'. The caller
will first filter the flags so that there is no conflicting flags (e.g.,
no '-m32 -m64') supplied.
Changed by Alexey Neyman:
- make option analysis check specific option rather than match global
options string as a whole. Moreover, old code did not handle multiple
options in the same multilib, e.g. '-m64 -mlittle'.
- fixed substitutions in powerpc.sh (*le variants did not match the
pattern in the shell parameter expansion)
- make s390.sh actually apply the flags it gathered from the options.
- straighten the spaghetti in x86.sh by setting two flags, arch & abi.
Also, do not depend on "gnu" being the last part - we can have
'*-uclibcx32', for example.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: Ray Donnelly <ray.donnelly@gmail.com>
Signed-off-by: Alexey Neyman <stilor@att.net>
By default, sparc64-*-linux is configured with -mcpu=v9. However,
according to https://sourceware.org/ml/libc-alpha/2005-12/msg00027.html:
"There is no Linux sparc64 port that runs on non-UltraSPARC-I+ ISA
CPUs."
v9 is such a "non-UltraSPARC-I+ ISA CPU", so it makes no sense to
default to v9 when targetting Linux.
Change the default to ultrasparc, even though it can suboptimally
schedule instructions for newer SPARC CPUs. See the pending patch:
https://patchwork.ozlabs.org/patch/409424/
Signed-off-by: Alexey Neyman <stilor@att.net>
Since CUSTOM_LOCATION_ROOT_DIR was removed from config/global/paths.in
in commit c499ccb, xtensa should depend only on it's
ARCH_XTENSA_CUSTOM_OVERLAY_LOCATION.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The Xtensa processor architecture is a configurable, extensible,
and synthesizable 32-bit RISC processor core. Processor and SOC vendors
can select from various processor options and even create customized
instructions in addition to a base ISA to tailor the processor for
a particular application.
Because of the configurability, the build process requires one additional
step for gcc, binutils, and gdb to update the default configuration.
These configurations are packed into an 'overlay' tar image, and are
simply untarred on top of the default configuration during the build.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
This commit removes blackfin support.
I'm open to re-adding blackfin after crosstool-1.23.0 is released, but
it is currently too difficult to port forward to newer versions of gcc
and uclibc.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This change, as per #222, reduces the number of supported releases of
gcc to the latest branch releases.
I noticed while doing this work that gcc-4.5.4 was never added, so I
moved patches for gcc-4.5.3 to 4.5.4 and updated the
bfin-unknown-linux-uclibc example. Also, 120-siginfo.patch was fixed
upstream in the 4.5.4 release, so this patch is omitted.
I also bumped the avr sample to 4.9.3 from 4.9.2.
With the addition of gcc-5.x, the gcc release team now releases the
major.minor.0 versions, while updates to the branch are available in
svn/git. We'll address that when we get to issue #219. This change just
removes CC_GCC_5_1 and moves CC_GCC_5_2 to CC_GCC_5, and removes
CC_GCC_5_1_or_later and moves CC_GCC_5_2_or_later to CC_GCC_5_or_later.
This is the first of two part changes, as mentioned in #222.
This change is slated for release in 1.22.0. The next change will be
slated for 1.23.0, and will limit gcc versions to what is on
https://gcc.gnu.org under "Release Series and Status", which is
currently 4.9.3 and 5.2.0, although I will also support the previous
supported version. In this example that would be 4.8.5.
Last, but not least, this change also retires AVR32 support.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This commit adds support for the Atmel AVR 8-bit RISC architecture.
This is the first 8-bit architecture to be added to crosstool-ng so the
configuration options for 8-bit architectures are added here as well.
gcc has had support for AVR for quite a while, at least since the 4.3
series for the currently popular ATmega microcontroler series.
The AVR architecture only supports bare-metal toolchains.
gcc for the AVR 8-bit architecture, usually referred to as avr-gcc, is
commonly used in conjunction with the avr-libc library which provides
additional resources for the Atmel AVR 8-bit microcontrollers.
avr-gcc can also be found as a supported package in some recent Linux
distributions.
This commit also closes#66
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
This patch adds initial support for musl-libc.
Musl-libc versions currently supported:
* 1.0.3 (Stable)
* 1.1.3 (Previous Mainline)
* 1.1.4 (Mainline)
Futher improvements are needed.
* gcc-4.9.x has issues (Might be fixed in musl-1.1.4).
* Multilib support is needed.
* Checks to make sure paths are correct.
* Move to 2-step gcc build. 3-step build is not necessary.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
[yann.morin.1998@free.fr: removed the gcc musl patch, to be added later;
removed dead code do_get_arch()]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Technically, I don't forbid powerpcle support either, but I'm not sure that
there is any library/compiler support for that at the moment (though the hw
technically makes it possible).
powerpc64le needs glibc 2.19 and gcc 4.9. I haven't looked into the support
tools, but at least gdb 7.5 is too old (7.7.1 definitely has support).
Also make powerpc64 non-experimental. It's practically old at this point.
Signed-off-by: Cody P Schafer <dev@codyps.com>
[yann.morin.1998@free.fr: use ${target_endian_le} and ${target_bits_64}]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <64bfbbced9dd8f62e0d6.1399801945@gun>
Patchwork-Id: 347775
AArch64 id the 64-bit variant for ARM.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Zhenqiang Chen <zhenqiang.chen@linaro.org>
Cc: Michael Hope <michael.hope@linaro.org>
For some architectures, it is legit to have an alternate value in the
'architecture' part of the tuple. For example:
armv5te-*
armv7a8-*
Besides, some packages expect the tuple to reflect the arch variant
(eg. openMPI) to detect the variant's capabilities (eg. atomic
primitives).
This patch adds an option for the user to specify a suffix to be added
to the arch-part of the tuple.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Message-ID: <20130120225822.GS6838@1wt.eu>
Patch-Id: 213994
[yann.morin.1998@free.fr: make it a suffix, not an override]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Toolchains that use the hard-float ABI now are to be denoted by a tuple
ending in *eabihf, while the prevbious *eabi is now an indication that
the toolchain uses the softfloat ABI.
This is purely a cosmetic thing, for distros to differentiate their
hardfloat-ABI ports from their softfloat-ABI ports.
(note: softfloat ABI does not mean that it is using softfloats; it can
be using hardfloat instructions, but using the softfloat ABI).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Add Microblaze architecture support.
This depends on EXPERIMENTAL, as upstream projects do not yet
include full support to build a modern microblaze compiler.
This is in the process of being updated, but is not currently
publicly accessible.
Signed-off-by: "David Holsgrove" <david.holsgrove@xilinx.com>
Message-Id: <9c93e18b3d68b19303f3.1348113870@localhost.localdomain>
PatchWork-ID: 185305
Changeset #7c288c777455 broke the tuple for uClibc-based
powerpc toolchains, by unconditionally forcing CT_TARGET_SYS
to "gnu".
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add support for building SPARC targeted toolchain.
With this patch I have built a working sparc V8 (32 toolchain).
Testing shows that not all gcc versions works well:
4.4.1 OK (kernel builds and the final kernel can boot)
4.4.2 Not tested
4.4.3 Not tested
4.4.4 BAD (Kernel can build but fails during boot)
4.4.5 BAD (Kernel can build but fails during boot)
4.5.1 BAD (Build fails with a spill related ICE - http://gcc.gnu.org/bugzilla/show_bug.cgi?id=35664)
4.5.2 OK (kernel builds and boots)
I have successfully been using the 4.5.2 version for a few months.
This patch does not add support for the LEON variant.
That may come later.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[yann.morin.1998@anciens.enib.fr: for 32-bit, default CT_TARGET_ARCH is OK]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
ia64 is broken in every gcc/glibc combinations I tested (except for the
existing sample that used very old versions).
Nobody complained on the list about not being able to build recent versions.
So the only way forward I can see is to remove the architecture altogether.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
This adds selection for one of the o32, n32 and n64 ABIs.
Later, we can easily use those boolean options, rather than
relying on a user-supplied string option.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
For uClibc, the name of the Blackfin architecture is 'bfin'. Actually,
the naming of the architecture is quite messy: for toolchain tuples
and uClibc, it's bfin, but for the kernel, it's blackfin. We've
arbitraly choosen to name it "blackfin" in Crosstool-NG.
Add Blackfin-related uClibc patch to fix a build failure related to
fork() being used in unistd/daemon.c.
Yann E. MORIN:
Apply the patch to the kernel/linux build script to use 'linux'
in the noMMU tuples. See:
http://sourceware.org/ml/crossgcc/2010-04/msg00010.html
Signed-off-by: Remy Bohmer <linux@bohmer.net>
[yann.morin.1998@anciens.enib.fr: use defaults for CT_TARGET_ARCH]
Signed-off-by: "Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Don't select unneeded config knobs. Don't select non-existing config knobs.
Use the "no patch" config knob, instead of pointing to an non-exiting local
patch dir. Simplify the tuple-related scripts. Update the samples.
Add config option to build wtarget code with THUMB interworking.
This is used to build the C library as well as all other code
that runs on the target.
