Instead of checking if thread support is enabled during the build, move
the check to kconfig-time. Since if threading support is not availble,
libgomp should not be available either.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Because >= gcc-5.x does not require cloog, it should not be forced on
the command line arguments for configure if graphite is enabled.
Make CLooG optionally added, if it is needed (aka: <= gcc-4.9).
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Now that versions of gcc that required PPL are no longer supported
( >= gcc-4.5.x AND <= gcc-4.7.x )
...we no longer require PPL or CLooG/PPL.
This commit:
* Removes PPL
* Removes CLooG/PPL
* Updates the documentation
* Updates build script for CLooG and GCC
* Removes PPL and CLooG/PPL from scripts/addToolVersion.sh and
scripts/showSamples.sh
* Adds ISL to scripts/addToolVersion.sh and scripts/showSamples.sh
I know that sounds like a lot for one commit, but it was all kind of
inter-tangled.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
As per #222, in crosstool-NG >= 1.23.0, we will only support:
[upstream supported gcc versions] - 1
As of this writing, these versions are:
* 5.2.0
* 4.9.3
* 4.8.5 (the -1, since development on 4.8.x is now closed)
I plan to keep 4.8.5 around because of some architectures having issues
with over-optimization or just faulty optimization in the 4.9.x and
possibly newer versions.
I also cleaned up a requirement for glibc to depend on >= gcc-4.6.x for
>= glibc-2.20, but since the lowest gcc we support after this change is
>= 4.8.5, this condition can go away.
Patches for older gcc versions are removed in the next commit.
This closes#222
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
When building from:
{git,http}://sourceware.org/git/binutils-gdb.git
and setting BINUTILS_CUSTOM or GDB_CUSTOM, they could be the same
source.
These config options should not affect normal released versions.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
As per the change notes of GCC-6:
https://gcc.gnu.org/gcc-6/changes.html
and conversations I've had with the buildroot folks, there is no need
to support sh5/sh64.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Some LIBCs need some love in showSamples.sh.
uClibc-ng is of type of uClibc, so output uClibc-ng if
CT_LIBC_UCLIBC_NG=y.
mingw-w64 doesn't have a CT_LIBC_VERSION, but it does have a
CT_WINAPI_VERSION. So output that instead.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
I'm not even sure how the previous loop was supposed to work.
The config variables are not exported to the environment.
Now we properly get which cc we are using and grab the version to
display it correctly with the output of wiki-samples.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
We check for apps:
* make
* sed
* grep
* awk
* libtool/libtoolize
* install
* patch
* and more
...during configure. Our scripts should be consistent about using the
variables that define where the found tool was found.
Of course, we do hard-link these tools in buildtools, but that should be
a backup for the components we are building. Our scripts should always
use the tools we find.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This commit removes ncurses-5.9 and adds 6.0.
I also provide the stable patch updates in patches/ncurses/6.0.
I have also added an experimental toggle for enabling the new ABI
support.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Now that expat/curses have migrated into separate script, no need for
do_debug_gdb_parts() and need_gdb_src checks.
Signed-off-by: Alexey Neyman <stilor@att.net>
Currently, builds for build and target (matching the current
implementation). Need to add building for host for canadian crosses.
TIC_PATH is removed - configure in ncurses searches $PATH, so it finds
'tic' in buildtools anyway. Arguably unneeded code for MacOS also
removed, with a FIXME comment for validation by someone using MacOS.
Signed-off-by: Alexey Neyman <stilor@att.net>
Currently, only libelf has a for-target step - but it generalizes
the step to hook other libraries into this step.
Signed-off-by: Alexey Neyman <stilor@att.net>
I was going to start doing some autoconf work, and noticed that
configure.in was executable. Then I noticed Makefile.in was executable.
o.O
So, I ran ```find . -type f -executable``` and found a bunch of files
that shouldn't be set executable.
This commit makes them normal files again.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
The Xtensa processor architecture is a configurable, extensible,
and synthesizable 32-bit RISC processor core. Processor and SOC vendors
can select from various processor options and even create customized
instructions in addition to a base ISA to tailor the processor for
a particular application.
Because of the configurability, the build process requires one additional
step for gcc, binutils, and gdb to update the default configuration.
These configurations are packed into an 'overlay' tar image, and are
simply untarred on top of the default configuration during the build.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
.. they're needed for the RPC generation in glibc
on both Cygwin and MinGW-w64.
Neither are built on GNU/Linux and iconv is not
built on Darwin.
Two patches for gettext are needed, one so that
-O0 works and one so that static builds can be
made.
They can take a good while to build, so if not
needed for_host or for_build then they are not
built.
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
I've added the .config files to contrib/uClibc-defconfigs from buildroot
to use as default configs if they are not provided in the sample.
If a particular architecture really needs an option set, it should be
either updated in the manange_uClibc_config function in
scripts/build/libc/uClibc.sh or a custom ${uclibc_name}.config should be
added to the sample (usually via `ct-ng saveconfig`).
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This commit updates uClibc to use the new CT_Kconfig options from the
previous commit. The older sed method of sanity checking the uClibc
.config was error prone and clumsy.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This commit adds 4 new functions to aid in the process of managing a
kconfig .config file:
* CT_KconfigSetOption <option> <value> <file>
* CT_KconfigEnableOption <option> <file>
* CT_KconfigDisableOption <option> <file>
* CT_KconfigDeleteOption <option> <file>
(akin to how buildroot manages the uClibc.config)
These functions are global so that we can manage any component that also
uses kconfig, or to be able to use it internally on Crosstool-NG's
kconfig files.
Last but not least, be consistent and update sed to be ${sed}!
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
mpfr.org has been less then reliable, so lets make gnu.org the primary
instead of the secondary source.
This closes#250
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This commit removes blackfin support.
I'm open to re-adding blackfin after crosstool-1.23.0 is released, but
it is currently too difficult to port forward to newer versions of gcc
and uclibc.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Some architectures, like arc and blackfin set CROSS_COMPILE to a default
if it is not set on the command-line.
Since we are building the cross-compiler, we need to ALWAYS set
CROSS_COMPILE, since building/checking headers is done after the GCC
PASS1 step.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This change, as per #222, reduces the number of supported releases of
gcc to the latest branch releases.
I noticed while doing this work that gcc-4.5.4 was never added, so I
moved patches for gcc-4.5.3 to 4.5.4 and updated the
bfin-unknown-linux-uclibc example. Also, 120-siginfo.patch was fixed
upstream in the 4.5.4 release, so this patch is omitted.
I also bumped the avr sample to 4.9.3 from 4.9.2.
With the addition of gcc-5.x, the gcc release team now releases the
major.minor.0 versions, while updates to the branch are available in
svn/git. We'll address that when we get to issue #219. This change just
removes CC_GCC_5_1 and moves CC_GCC_5_2 to CC_GCC_5, and removes
CC_GCC_5_1_or_later and moves CC_GCC_5_2_or_later to CC_GCC_5_or_later.
This is the first of two part changes, as mentioned in #222.
This change is slated for release in 1.22.0. The next change will be
slated for 1.23.0, and will limit gcc versions to what is on
https://gcc.gnu.org under "Release Series and Status", which is
currently 4.9.3 and 5.2.0, although I will also support the previous
supported version. In this example that would be 4.8.5.
Last, but not least, this change also retires AVR32 support.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Some older versions of configure (including the one in GMP 4.3.2)
interpret the $ECHO environment variable as the `echo' utility to
use. CT-NG sets the variable to `:' and exports it if V=0 or V=1
is supplied, breaking the samples using such configure. This currently
includes bfin-unknown-linux-uclibc and powerpc-unknown-linux-uclibc.
Also, correct the description of the V= variable - V=0 is *not* the
default; in fact, default does not correspond to any of the V=[012]
values.
Signed-off-by: Alexey Neyman <stilor@att.net>
If the build is aborted before the working directory is created,
there's also an induced error message about inability to create
a 'backtrace' file. But in that case, there is no subshells executing
yet.
Signed-off-by: Alexey Neyman <stilor@att.net>
'ct-ng show-config' will prepend host for canadian builds; otherwise,
the name is different from the name used to configure the build
(and indistinguishable from a simple cross).
Signed-off-by: Alexey Neyman <stilor@att.net>
Provides a simpler alternative to editing config to enable
CT_ONLY_DOWNLOAD, doing ct-ng build and then restoring .config.
Signed-off-by: Alexey Neyman <stilor@att.net>
Having *.la in the installation directory breaks ltrace: in ltrace,
libtool somehow considers libsupc++ to be an "accessory library" and
does not add -lsupc++ to the link flags. Neither Ubuntu, nor RedHat
include *.la files into their packages for libstdc++.
Signed-off-by: Alexey Neyman <stilor@att.net>
- New configurations:
- CC_GCC_TARGET_FINAL:
Use the default targets "all" and "install" for the final compiler for
bare metal.
- Adding parameter "build_step" to function do_gcc_core_backend:
do_gcc_core_backend is used for the core compiler and in case of bare metal
for the final compiler, too. To have better control over the parameters for
the final compiler "build_step" is used.
- Used for proper logging.
- Use CT_CC_GCC_CORE_EXTRA_CONFIG_ARRAY or CT_CC_GCC_EXTRA_CONFIG_ARRAY.
- If CT_CC_GCC_TARGET_FINAL is set and the final compiler is build then the
make targets for the final compiler are used ("all", "install").
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
CT_CC_GCC_HAS_LIBQUADMATH and CT_CC_GCC_LIBQUADMATH (--en/disable-libssp,
--en/disable-libquadmath, --en/disable-libquadmath-support) from function
do_gcc_backend.
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
glibc-2.17 and above no longer have external addons or ports.
So if we are => 2.17, don't even think about trying to mess with ports
or addons.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Configure for for core GCC did not use Core gcc extra config.
Use now config variable CT_CC_GCC_CORE_EXTRA_CONFIG_ARRAY.
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
avr-libc doesn't have write permissions in these by default in the 1.8.1
tar release, this caused an error during build with
CT_OVERIDE_CONFIG_GUESS_SUB enabled.
chmod u+w them before overriding to avoid an this error.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Add support for applying arch-specific patches found in
"patches/${pkgname}/${version}/${CT_ARCH}".
This is needed for applying a popular binutils patch specific for the
AVR architecture but which isn't isolated for AVR in binutils' code.
In this case, applying it for every architecture would end up bloating
binutils' "size" options with AVR specifics.
This feels like a bit of a hack but it is easy enough to support with
current crosstool-ng infrastructure, seems like worth it for this case.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
This commit adds support for the avr-libc C library.
According to the project page at http://www.nongnu.org/avr-libc , the
avr-libc package provides a subset of the standard C library for Atmel
AVR 8-bit RISC microcontrollers. In addition, the library provides the
basic startup code needed by most applications.
Support for this library in crosstool-ng is only enabled for the AVR
8-bit target.
The avr-libc manual and most distributions build the AVR 8-bit gcc
toolchain with the "avr" (non-canonical) target.
Some experimentation also led to the conclusion that other (canonical)
targets are not very well supported, so we force the "avr" target for
crosstool-ng as well.
The manual also recommends building avr-libc after the final gcc build.
To accomplish this with crosstool-ng, a new do_libc_post_cc step is
added, in which currently only avr-libc performs its build, and is a
no-op for the other libc options.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
This commit adds support for the Atmel AVR 8-bit RISC architecture.
This is the first 8-bit architecture to be added to crosstool-ng so the
configuration options for 8-bit architectures are added here as well.
gcc has had support for AVR for quite a while, at least since the 4.3
series for the currently popular ATmega microcontroler series.
The AVR architecture only supports bare-metal toolchains.
gcc for the AVR 8-bit architecture, usually referred to as avr-gcc, is
commonly used in conjunction with the avr-libc library which provides
additional resources for the Atmel AVR 8-bit microcontrollers.
avr-gcc can also be found as a supported package in some recent Linux
distributions.
This commit also closes#66
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
This option is old. GCC 4.3.x old. It isn't supported anymore, and just
confuses me. I'm not planning to support 4.3.x, or really anything older
then 4.7. So this option is gone to the wind.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This functionality was provided so that crosstool-ng could have a
further set of patches considered experimental and unsupported.
Now that musl-libc support is making it's way upstream in gcc, I'm
removing this support and the experimental musl patches.
In later commits, backports from gcc upstream will be added to the
supported patch sets to support musl-libc.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
when specifying a custom kernel provided as a tar ball, the tar ball gets symlinked. the -e test will fail.
Signed-off-by: Dirk Husemann <dirk@d2h.net>
This commit updates gcc's test suite to use the new config options.
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
Reviewed-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: Yann Diorcet <diorcetyann@gmail.com>
Update 300-gdb.sh to use the new config options.
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
Reviewed-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: Yann Diorcet <diorcetyann@gmail.com>
Update 100-gcc.sh to use the new config option names.
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
Reviewed-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: Yann Diorcet <diorcetyann@gmail.com>
This change updates the CC.* references to CC_GCC.* in the internal
scripts.
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
Reviewed-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: Yann Diorcet <diorcetyann@gmail.com>
This change adds support to show samples for multiple compilers.
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
Reviewed-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: Yann Diorcet <diorcetyann@gmail.com>
The gconv modules are present in the (e)glibc toolchains, and some
applications directly link with one or more of those modules (even
though the classic way of using them is by dlopen()ing them).
So, also look in /usr/lib/gconv when searching for libraries.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This change updates the config to support multiple compilers by moving
CC_.* to CC_GCC_.* to make room for other compilers.
We also update gen_in_frags.sh to check for a default cc.
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
Reviewed-by: Yann Diorcet <diorcetyann@gmail.com>
Reviewed-by: Bryan Hundven <bryanhundven@gmail.com>
This commit moves gcc.sh to 100-gcc.sh to accomodate for other
cross-compilers that crosstool-ng might be able to build.
The first, to come soon, is llvm/clang.
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
Reviewed-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: Yann Diorcet <diorcetyann@gmail.com>
Pass cset as ref=somename to use this feature. CT_GetGit echos
the cset sha1 on exit since the caller will need to know that
information as it forms part of the downloaded tarball name.
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
This commit changes sed, awk, and grep to use the ones we found during
configure time. This helps make the build more consistent.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This change modifies the use of sed and awk to use the variables set by
paths.sh during the installation process of crosstool-NG.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
The argument will prevent the prefix path from being added as an include path while building mingw. Having the prefix as an include path might cause all kinds of weird issues if prefix directory also exists on the build machine.
Signed-off-by: Nils Petter Eftedal <nilspetter@eftedal.org>
Added new functions to support changes in prefix and required vendor tuple for new versions of mingw.
Tested and verified with mingw version 2.0.7, 3.3.0 and 4.0-rc3.
Signed-off-by: Nils Petter Eftedal <nilspetter@eftedal.org>
Glibc actually does create a build executable. It's under sunrpc and it's
called cross-rpcgen. It uses gettext, so if that's not available in a standard
place on your system (for example if you're using Mac OS X and Homebrew), then
you are all out of luck.
Signed-off-by: Lawrence D'Anna <larry@elder-gods.org>
Without this canadion cross builds create invalid symlinks:
When the code in do_cc_core_backend is called there is no
${CT_TARGET}-gcc in the install directory. Therefore ext is empty and
we create a link to ${CT_TARGET}-gcc. The final compiler
step then installs ${CT_TARGET}-gcc.exe and creates a working
${CT_TARGET}-cc.exe symlink but we still keep the invalid link
as well.
Signed-off-by: Johannes Pfau <johannespfau@gmail.com>
Prirotize http downloads before ftp downloads.
By having http download first, those using proxy will work with the
current download mechnism.
This tells me that that mechnism needs to be updated.
(proxy support and/or kconfig toggles)
closes#3
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
glibc versions that don't support --with-pkgversion or --with-bugurl
will cause a harmless:
====================
configure: WARNING: unrecognized options: --with-bugurl...`
====================
If it's set, use it, if it's a recognized option.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
As posted on http://www.eglibc.org/
====================
EGLIBC is no longer developed and such goals are now being addressed
directly in GLIBC.
====================
I'm not interested in maintaining build support for unsupported
software.
Older branches of crosstool-ng continue to have eglibc support.
If you find issues with older branches, I'm always open to pull
requests.
Removing eglibc also frees up glibc cleanup and build optimization.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This script has a '#!/bin/sh' shabang and might be running on a POSIX
shell. So replace bash-specific constructions (pushd/popd, for((...)),
read with '-u' option) to POSIX-shell equivalents.
Signed-off-by: Led ledest@gmail.com
We had following problem: We're building a toolchain with an old glibc
version for compatibility with old Linux distributions (glibc 2.9). This
version requires make < 4 to build. However, the configure script of
glibc looks for make in the order "gnumake", "gmake" and "make". So when
"gmake" is available in the system (which is the case on Gentoo Linux
per default, unfortunately), then configure finds the system gmake 4.1
instead of the ct-ng make 3.82.
This patch adds an option to install a symlink so that 'gmake' is also
available in the old version when building toolchains.
Signed-off-by: Bernhard Walle <bernhard@bwalle.de>
Canadian Cross compile for baremetal fails with error;
checking for the value of EOF... configure: error: computing EOF failed
which is due to libstdc++ configure not being able to find stdio.h
Having all modes of the core compiler copyheaders from CT_HEADERS_DIR
(in combination with previous patch for newlib to add a do_libc_start_files
function to copy into the CT_HEADERS_DIR) resolves this.
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
Require access to newlibs headers in gcc.sh, matching other libc components.
Resolves issue with headers not found.
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
Currently, the obsolete RPC headers are only installed for eglibc,
but glibc has the same /deficiency/, so install the obsolete RPC
for both.
Signed-off-by: Jérôme BARDON <bardon.pro@gmail.com>
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
Yes, I missed the backslash which messed up the linaro stuff.
The more I look at this code, I feel it needs to be refactored a bit. So
I'll come back to this in the future and clean it up.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
It's not my day.
linaro_version is a filter. If it is not a linaro toolchain, it will
just be CT_{CC,GDB}_VERSION. If it is a linaro toolchain, CT_{CC,GDB}_VERSION
will be prefixed with 'linaro-' and will not match linaro_version, as
linaro_version will just have the part after 'linaro-'.
This *really* fixes the issue :sigh:
Thanks again to @elsonwei for being right the first time!
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
linaro_version and linaro_series are defined but not set if we are not
configured for linaro builds.
Therefore we need to default them to "" (null string).
As reported by @elsonwei
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
If custom {e}glibc is being used, no need to carry out the
extract or patching phase of scripts/build/libc/glibc-eglibc.sh-common
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
CUSTOM_LOCATION config options only presented in menuconfig if component
CUSTOM version selected.
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
CUSTOM_LOCATION config options only presented in menuconfig if component
CUSTOM version selected.
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
No longer recommended practice to use --enable-add-ons=nptl, so
for 2.20 and later (along with custom glibc), don't add the
CT_THREADS to the addons_list
https://sourceware.org/glibc/wiki/Release/2.20#Packaging_Changes
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
This change updates the download locations to default to the official
download site.
For gcc and gdb, also separate out the linaro download locations so that
if you are downloading the linaro variant, it skips trying to download
from the official gcc mirror.
This commit closes#3
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Without this fix, elf2flt will blow up complaining that it can't resolve
dlopen() and friends. One has to explicitly pass '-ldl' on the final
linking command line, because the system linker is not resolving
indirect dependent shared libraries.
I've needed to this patch for several years on Fedora systems.
Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
When try to build the static toolchain, binutils failed.
I have checked the libtool script, and found that the following option
-all-static
-static
-static-libtool-libs
are processed in a strange way. If any one of those three options
appears firstly in the cmdline, all others will be neglected. Our
LDFLAGS is ".... -static -all-static -o", so the -static option
takes the real effect, and the -all-static has no useage actually!
that is the cause of the failure.
Signed-off-by: Brock Zheng <goodmenlinux@gmail.com>
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
BSD grep does not interpret a null alteration. It complains about an
empty sub-expression, e.g.:
$ grep --version && grep -E '^(# |)CT_' .config
grep (BSD grep) 2.5.1-FreeBSD
grep: empty (sub)expression
This patch replaces the null alteration with a zero or once quantifier
which works with both BSD & GNU grep.
$ grep --version && grep -E '^(# )?CT_' .config
grep (BSD grep) 2.5.1-FreeBSD
CT_CONFIGURE_has_xz=y
CT_CONFIGURE_has_svn=y
...
$ ggrep --version && ggrep -E '^(# )?CT_' .config
ggrep (GNU grep) 2.20
Copyright (C) 2014 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by Mike Haertel and others, see
<http://git.sv.gnu.org/cgit/grep.git/tree/AUTHORS>.
CT_CONFIGURE_has_xz=y
CT_CONFIGURE_has_svn=y
...
Signed-off-by: Jason T. Masker <jason@masker.net>
Tested-by: Andreas Bießmann <andreas@biessmann.de>
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
The output format of the file(1) command have changed since (at least)
the version 5.14. We need to to take care of an extra space.
Signed-off-by: Jean-Marie Lemetayer <jeanmarie.lemetayer@gmail.com>
[yann.morin.1998@free.fr: do not right-shift trailing back-slashes]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit adds a configuration knob for enabling extra developer
warnings to be enabled during the musl-libc build.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This option enables a configuration knob for adding debugging info.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Byt the end of the main script, the log file is being moved and
compressed, and the final destination might become read-only at any
time, so we consign stdout/err to oblivion.
This is incorrect, as some actions after may still fail (out of space,
for example).
So, properly restore stdout/err, but also stdin (useless, but harmless)
instead, so the user has a chance to see the error, especially since it
is not logged into the log file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
libsaniotizer requires a few headers that are not in uClibc, for
example. Also, it is only available for native threads (NPTL under
glibc.) Finally, it is only available starting with gcc-4.8.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This patch adds initial support for musl-libc.
Musl-libc versions currently supported:
* 1.0.3 (Stable)
* 1.1.3 (Previous Mainline)
* 1.1.4 (Mainline)
Futher improvements are needed.
* gcc-4.9.x has issues (Might be fixed in musl-1.1.4).
* Multilib support is needed.
* Checks to make sure paths are correct.
* Move to 2-step gcc build. 3-step build is not necessary.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
[yann.morin.1998@free.fr: removed the gcc musl patch, to be added later;
removed dead code do_get_arch()]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This change adds support for experimental patches to be introduced to
crosstool-ng. The patches enabled by this option are to be located here:
patches/experimental/<package>/<version>/XXXX-NAME.patch
Where, XXXX is the patch number to be applied in order, like:
0001-some_patch_one.patch
0002-some_patch_two.patch
9999-some_patch_to_be_applied_last.patch
In the first patch series, all patches in the EXPERIMENTAL_PATCHES
option will be applied all at once, or none at all.
In a later [RFC] patch, I plan on adding finer tuned patch
enable/disable options based on the name of the patch and where it is
located in the patches/experimental sub-tree. So the name of the patch
should use underscores between words in the patch name.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
[yann.morin.1998@free.fr: slightly reword prompt]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The previous patch (cset b61a1b1, cc/gcc: avoid passing --enable-multilib)
only fixed the core backend, and missed the final backend.
This patch does the same as b61a1b1, but for the final backend.
Signed-off-by: Cody P Schafer <dev@codyps.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This script is too Hg-specific. Just remove it.
In case we need something similar in the future,
we'd just have to use the better git counterparts.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This script is too Hg-specific. Just remove it.
In case we need something similar in the future,
we'd just have to use the better git counterparts.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Technically, I don't forbid powerpcle support either, but I'm not sure that
there is any library/compiler support for that at the moment (though the hw
technically makes it possible).
powerpc64le needs glibc 2.19 and gcc 4.9. I haven't looked into the support
tools, but at least gdb 7.5 is too old (7.7.1 definitely has support).
Also make powerpc64 non-experimental. It's practically old at this point.
Signed-off-by: Cody P Schafer <dev@codyps.com>
[yann.morin.1998@free.fr: use ${target_endian_le} and ${target_bits_64}]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <64bfbbced9dd8f62e0d6.1399801945@gun>
Patchwork-Id: 347775
These variables behave the same for bitness as their counterparts do
for endianness: they are defined to the appropriate bitness.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Cody P Schafer <dev@codyps.com>
We currently define target_endian_el and target_endian_eb to be the
tuple extension depending on endianness, defined to be respectively
'el' or 'eb' according to the endianness.
Some architecture do not use 'el' or 'eb', but use 'le' or 'be'.
Provide that as well, as two new variables: target_endian_le and
target_endian_be.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Cody P Schafer <dev@codyps.com>
In case we're using a custom (aka local) binutils source, we still
need to extract and patch elf2flt.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The final bare-metal compiler is built using the core backend.
Currently the core uses the CC_CORE_EXTRA_CONFIG_ARRAY variable.
While this works as supposed to, this can leave the user puzzled
in the menuconfig, since all he can see is the core options, not
the final options.
Only show the core options if any of the core passes are needed,
and use the final options in the core-backend if we're issuing
the bare-metal compiler.
Signed-off-by: Cody P Schafer <dev@codyps.com>
[yann.morin.1998@free.fr: hide core options if no core pass needed;
use final option in core backend if issuing the bare-metal compiler]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <22181e546ba746202489.1399688067@localhost>
Patchwork-Id: 347586
Some versions of gcc have a broken --enable-multilib flag. As multilib is the
default, only pass the --disable-multilib flag
Signed-off-by: Cody P Schafer <dev@codyps.com>
[yann.morin.1998@free.fr: make it an if-block; duplicate commit log as comment]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <5c970c1ceb22528fe28a.1399687923@localhost>
Patchwork-Id: 347585
Allow '-1' to be specified as CONNECTION_TIMEOUT to disable the use
of the connection timeout for wget.
Signed-off-by: Cody P Schafer <dev@codyps.com>
Message-Id: <cb33f8c2cbaf802d4f04.1399687632@localhost>
Patchwork-Id: 347582
newlib: fix extract process for custom version
If the user specifies the use of a custom newlib version, the logic in the
extract function was reversed, so this step would fail.
Signed-off-by: Trevor Woerner <trevor.woerner@linaro.org>
[yann.morin.1998@free.fr: keep leading indentation]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <c727adf1b7bd2c1e891d.1393353347@openSUSE-i7>
Patchwork-Id: 324060
We now know exactly what pass to build, so build only what is required.
Reported-by: Trevor Woerner <trevor.woerner@linaro.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
so that it is available to available to
the core C compiler build because static
libraries are built and ranlib is used
on them.
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
Message-Id: <CAOYw7dt=+DdnKAHNShfs6a+=7sS+DLQYkyxnQMAwmw7E7zqvgA@mail.gmail.com>
Patchwork-Id: 316477
Decimal floats need support form the C library, namely support
for fenv, which is missing in uClibc for any architecture but
x86/32.
Add an option (a choice) to enable or disable decimal floats.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Support for fenv.h is a little bit more tricky that enabling it only
for x86-32 is not right.
Add an option for the user to choose whther to install fenv.h or not.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Do to glibc what we did to eglibc in #dff359adf15c.
Only (very) old versions of glibc have other external addons,
and they are no longer meaningful.
But for consistency, do the change nonetheless.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When trying to extract an already present (aka bundled) addon,
print the name of that addon, for clarity, and to help analyse
the build.log post-mortem.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Since gcc 4.8 C++ is also used as implementation language (see gcc
release notes).
Signed-off-by: "Daniel Dittmann" <ddittmann@gmx.net>
Message-Id: <acc7d11bc77b30f21c5b.1388863298@bernalk.machteam>
Patchwork-Id: 306883
gcc-4.8 comes with a new library to sanitise memory access:
- heap-, stack-, and global-buffer overflow, use-after-free
- data-races between threads
This library requires some _np parts of the API, which are not
implemented in the (old) LinuxThreads, which is still available
in uClibc.
Since NPTL requires a i486 or above, i386 are stuck with using LT,
which precludes building the libsanitizer.
Disable libsanitizer, a bit like libatomic is.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Niels Penneman <niels@penneman.org>
For the versions of eglibc where the ports addon is not external (ie,
all versions after, and including 2.17), we would fail to download the
localedef addon, since the test did not care about the addon we were
about to download, only whether the ports addon was external or not.
Fix that by skipping the ports addon only if that's the addon we're
trying to download.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The comma is used by the autotools as separator in many sed expressions,
which break if a directory contains commas.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cset 3b61be3d7aa6 (prepare for arch whose kenel name is not the standard name)
failed to name a variable consistently, so all archs but arm64 were broken.
Fix that by renaming the variable in a consistent way.
Reported-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
AArch64 id the 64-bit variant for ARM.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Zhenqiang Chen <zhenqiang.chen@linaro.org>
Cc: Michael Hope <michael.hope@linaro.org>
For some architectures, the kernel architecture name is not the common
name of the architecture for other tools.
For example: ARM 64-bit is commonly referenced as aarch64, but the kernel
calls it arm64.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
Signed-off-by: Zhenqiang Chen <zhenqiang.chen@linaro.org>
[yann.morin.1998@free.fr: split out of the aarch64 patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Some of the avr32headers related variables are used in different
functions, so have to be declared globally, not locally.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Don't download glibc-ports when glibc or eglibc version greater than 2.16,
because the "ports" source is mainline in the glibc or eglibc since version 2.17.
Signed-off-by: "Daniel Zimmermann" <netzimme@gmail.com>
Message-Id: <9c045ca3cf1b9dc89da3.1384602843@haus-VirtualBox>
Patchwork-Id: 291766
[yann.morin.1998@free.fr: slightly tweak subject, change variable name]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Building the cross-gdb shoud be done using the host compiler,
not the native compiler.
Reported-by: Per Arnold Blaasmo <per-arnold.blaasmo@atmel.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In case ${CT_LIBC_GLIBC_CONFIGPARMS} starts with a dash, printf will try
to interpret it as an option for itself, and will invariably flail in
panic as it does not recognise any of it.
Use a more robust solution, as suggested by Cody.
Reported-by: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Cody P Schafer <devel-lists@codyps.com>
'zcat' on MacOS-X is broken (it is not gzip's zcat, but compres' zcat).
Use 'gzip -dc' for portability, as suggested by Anthony.
Reported-by: Fernando Ortiz <fortiz2k@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Anthony Foiani <anthony.foiani@gmail.com>
Add well-known HTTP mirror as a fallback. This lets crosstool-ng
work when behind a HTTP/HTTPS only proxy.
Signed-off-by: Michael Hope <michaelh@juju.net.nz>
[me: split original patch in two]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <aeb4a850d0786ee62dc2.1375559989@wanda>
Patchwork-Id: 264436
Add well-known HTTP mirror as a fallback. This lets crosstool-ng
work when behind a HTTP/HTTPS only proxy.
Signed-off-by: Michael Hope <michaelh@juju.net.nz>
[yann.morin.1998@free.fr: split patch in two]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <aeb4a850d0786ee62dc2.1375559989@wanda>
Patchwork-Id: 264436
CLooG 0.18+ will use ISL instead of PPL, so we have to configure
adequately depending of which backend is in use.
The Kconfig entries will decide for us which is selected, so we
can rely on either PPL xor ISL to be selected, not both.
Reported-by: "Plotnikov Dmitry" <leitz@ispras.ru>
[Dmitry did a preliminray patch to add ISL support,
which this patch is inspired from]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This means:
- introduce the new symbols for 4.8
- do not always select PPL if graphite is selected
Reported-by: "Plotnikov Dmitry" <leitz@ispras.ru>
[Dmitry did a preliminray patch to add gcc-4.8 support,
which this patch is inspired from]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
ISL is used by gcc-4.8 onward for GRAPHITE, so is also used as
backend for CLooG 0.18.0 onward.
Reported-by: "Plotnikov Dmitry" <leitz@ispras.ru>
[Dmitry did a preliminray patch to add ISL, which this one is inspired from]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
>From 4.8, g++ is used as the default compiler to build the toolchain.
Signed-off-by: Zhenqiang Chen <zhenqiang.chen@linaro.org>
Message-Id: <CACgzC7B-LQvAw3hOYhBA7b7g0H1WtH20gqXM=Y=YFO4FrnZKWQ@mail.gmail.com>
Patchwork-Id: 243590
Building cross-tool based on gcc-4.8 fails while "Installing
pass-2 core C compiler", because building libgcc.mvars needs
libbacktrace.a that gcc.sh doesn't build. This patch inserts
a few lines configuring, and making libbacktrace into gcc.sh
to build gcc-4.8-based cross-tools successfully.
Reported-by: Plotnikov Dmitry <leitz@ispras.ru>
Signed-off-by: Jongsung Kim <neidhard.kim@lge.com>
Message-Id: <201305031831.33395.neidhard.kim@lge.com>
Patchwork-Id: 241258
-fpermissive is not a valid option to gcc.
Adding it to the CFLAGS make the ppl checks fail with the following
error:
[ALL ] Making check in tests
[ALL ] cc1: warnings being treated as errors
[ERROR] cc1: error: command line option "-fpermissive" is valid for C++/ObjC++ but not for C
[ALL ] cc1: warnings being treated as errors
[ERROR] cc1: error: command line option "-fpermissive" is valid for C++/ObjC++ but not for C
[ERROR] make[7]: *** [formatted_output.o] Error 1
Signed-off-by: "Samuel Martin" <smartin@aldebaran-robotics.com>
Message-Id: <bba2482a06a11415207e.1365876457@smartin-de-2.aldebaran.lan>
Patchwork-Id: 236383
This patch fixes the download of the avr32 headers in crosstool-ng by
fetching them directly from Atmel's web site instead of the now-broken URL
given by the original author of the avr32-header-fetching modification,
who fetched them from a copy on his own, now-defunct server.
It also adds the necessary logic to extract from a zip file, as that is
how the headers are packaged.
To configure it for avr32 after launching ct-ng menuconfig in an empty
directory:
Paths and misc options ->
Shell to use as CONFIG_SHELL = sh
Target options ->
Target Architecture = avr32
Toolchain options ->
Tuple's alias = avr32
Binary utilities ->
binutils version = 2.18a
C compiler
gcc version = 4.2.2
C-library
newlib version = 1.17.0
Enable IOs on long long = yes
Enable IOs on floats and doubles = yes
Disable the syscalls supplied with newlib = yes
CONFIG_SHELL is necessary to get round the "fragment: command not
found" bug when binutils-2.18 is configured using bash.
Prepared against crosstool-ng mercurial trunk on 31 March 2012.
Signed-off-by: Martin Guy <martinwguy@gmail.com>
[yann.morin.1998@free.fr: update bundles sample accordingly]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <CAL4-wQrg_NQ7jm-NCADqeyQr9twyhtx42OUGNThP6gWeqZc=kw@mail.gmail.com>
Patchwork-Id: 232612
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Rafael C <groups.r2@gmail.com>
Cc: Jérôme BARDON <bardon.pro@gmail.com>
Cc: Daniel Price <daniel.price@gmail.com>
Reported-by: Rafael C <groups.r2@gmail.com>
Reported-by: Jérôme BARDON <bardon.pro@gmail.com>
Reported-by: Daniel Price <daniel.price@gmail.com>
[yann.morin.1998@free.fr: use a conditional approach, also suggested by Daniel]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
There's no point in not supporting XML in the cross-gdb.
I mean, come on... ;-)
It's still the responsibility of the user to have the necessary
devel expat packages installed for his/her distro.
Reported-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
For the native-gdb (ie on the target), we unconditionally
need to build expat.
Make it a backend, it makes a litle bit cleaner code.
Reported-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
It should be used only to decide whether we need to download/extract
ncurses, not wheter we should build it or not.
Reported-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Rename those three variables to properly reflect their purpose: decide
whether we need to download/extract gdb/libexpat/libncurses, not whether
we need to build them or not.
This is only a rename for now, subsequent changes will further
fix this mess.
Reported-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The menu system provides an option to allow a user to request newlib
version 2.0.0. newlib-2.0.0, however, is not available at the download
location currently being used. It is, however, available (as are other
supported versions of newlib) at an alternate location.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Message-Id: <75ab5151c7f5dc9086e3.1362334313@suse64>
Patchwork-Id: 224561
In case we only download or extract the sources, do not fail while
finishing the toolchain: the test-suite directory may not exist, so
we can't chmod it.
Also, use safer constructs that won't trigger the 'set -e' in case of
failure (eg.: "[ ... ] && ..." is not safe in case the test fails).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
For some architectures, it is legit to have an alternate value in the
'architecture' part of the tuple. For example:
armv5te-*
armv7a8-*
Besides, some packages expect the tuple to reflect the arch variant
(eg. openMPI) to detect the variant's capabilities (eg. atomic
primitives).
This patch adds an option for the user to specify a suffix to be added
to the arch-part of the tuple.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Message-ID: <20130120225822.GS6838@1wt.eu>
Patch-Id: 213994
[yann.morin.1998@free.fr: make it a suffix, not an override]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Running as root is really, really dangerous.
Add a runtime-check that refuses to build if running as root.
Can be overriden with a double switch in the menuconfig.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Toolchains that use the hard-float ABI now are to be denoted by a tuple
ending in *eabihf, while the prevbious *eabi is now an indication that
the toolchain uses the softfloat ABI.
This is purely a cosmetic thing, for distros to differentiate their
hardfloat-ABI ports from their softfloat-ABI ports.
(note: softfloat ABI does not mean that it is using softfloats; it can
be using hardfloat instructions, but using the softfloat ABI).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The one was missing from the list.
It is very improbable that we ever need it, as elf2flt does no release,
and we always get it from CVS head. But for the sake of consistency, we
just add it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
While most components have their version in the .in file, some
have it in the .in.2 (eg. elf2flt).
Currently, to handle this case, we indiscriminately munge both files,
but this is wrong: in the elf2flt case, if we add a binutils version,
we do not want it to be added to elf2flt, and conversely.
So, for each tool, we need to explicitly know what file to munge.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Well, all eglibc version we support do, and latest glibc versions
we support do.
Not all glibc versions do, but older versions simply ignore the
unrecognised ./configure flags.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Since unrecognised ./configure flags are simply ignored,
we can always pass --enable-obsolete-rpc.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Since we've had the debug shell feature, fd #7 is now used to
redirect stderr, while it was previously unused.
Use fd #9 to redirect stdout.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
ppl-0.10.x does not build with gcc-4.6+, as it uses constructs that were
warnings with gcc-4.5 and before, but are now errors with gcc-4.6 and
above.
Fix that by passing -fpermissive in CFLAGS for ppl 0.10.
Reported-by: Jeremy Rosen <jeremy.rosen@openwide.fr>
Reported-by: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
xldd uses sed and grep as detected by ./configure. This works well if is
used on the machine that build the toolchain.
But if the user moves the toolchain to another machine where sed and grep
are not in the same directory (eg. /bin/sed vs. /usr/bin/sed), then xldd
will stop functionning.
Fix that by using ${SED} and ${GREP} if they are set in the environment.
Reported-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In gcc-'s core and final passes, do not print 'core' or 'final' in
log messages. We already print it in step messages.
Also, as we use the core backend to build the bare-metal final gcc,
it can be disturbing to read 'core' while we're in fact in 'final'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
It is used for skipping unnecessary compilation steps when the libc
doesn't need to be compiled (eg. when we do not use a C library).
Signed-off-by: Yann Diorcet <diorcet.yann@gmail.com>
Message-Id: <150eadb0117e697d79aa.1353625025@blackmint>
Patchwork-Id: 201222
Properly catch resuming the build when continuing past the
failed command.
The 'case ;;&' construct is a bash4ism. Get rid of it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The current mechanism to check if static linking is possible, and the mesage
displayed on failure, can be puzzling to the unsuspecting user.
Also, the current implementation is not using the existing infrastructure,
and is thus difficult to enhance with new tests.
So, switch to using the standard CT_DoExecLog infra, and use four tests to
check for the host compiler:
- check we can run it
- check it can build a trivial program
- check it can statically link that program
- check if it statically link with libstdc++
That should cover most of the problems. Hopefully.
(At the same time, fix a typo in a comment)
Signed-off-by: Daniel Price <daniel.price@gmail.com>
[yann.morin.1998@free.fr: split original patch for self-contained changes]
[yann.morin.1998@free.fr: use steps to better see gcc's output]
[yann.morin.1998@free.fr: commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <163f86b5216fc08c672a.1353459722@nipigon.dssd.com>
Patchwork-Id: 200536
Signed-off-by: Daniel Price <daniel.price@gmail.com>
[yann.morin.1998@free.fr: split original patch for self-contained changes]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <163f86b5216fc08c672a.1353459722@nipigon.dssd.com>
Patchwork-Id: 200536
Rework binutils in order to provide soon binutils alternative.
Signed-off-by: Yann Diorcet <diorcet.yann@gmail.com>
[yann.morin.1998@free.fr: split up original patch for self-contained changes]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <d3d1d51f399e6d2c1163.1353320546@macbook-smorlat.local>
Patchwork-Id: 199971
On some hosts, and for certain toolchains (eg. toolchain targetting
the upcoming Darwin), it may be necessary to pass arbitrary CFLAGS
and/or LDFLAGS when building the components.
And necessary infrastructure:
- EXTRA_{CFLAGS,LDFLAGS}_FOR_{BUILD,HOST} as config options
- pass those extra flags to components
Fix-up a slight typo in elf2flt at the same time (misnamed cflags).
Signed-off-by: Yann Diorcet <diorcet.yann@gmail.com>
Message-Id: <d24043276c9243a35421.1353077450@macbook-smorlat.local>
Patchwork-Id: 199645
sstrip has been obsoleted for a while now, as it's still broken
for some archs, and there seems to be no incentive to fix it
upstream. Besides, the space gained with sstrip is marginal at
best.
Signed-off-by: Yann Diorcet <diorcet.yann@gmail.com>
Message-Id: <65c8bf534d0647ce52cd.1353320545@macbook-smorlat.local>
Patchwork-Id: 199970
Use the same method as companion tools for providing generic and
extendable companion libs.
Signed-off-by: Yann Diorcet <diorcet.yann@gmail.com>
Message-Id: <515c5c4635d99ebe4877.1353074410@macbook-smorlat.local>
Patchwork-Id: 199613
Replace the 32-bit-only mingw32 with mingw-w64 that is capable
of building toolchains for both 32-bit and 64-bit Windows.
kernel/mingw: replace mingw32 with generic Windows
kernel/windows: New windows kernel supporting 32 and 64 bit arch
libc/mingw: Remove old options
patches: Remove old mingw libc options' patches
Signed-off-by: "Yann Diorcet" <diorcet.yann@gmail.com>
[yann.morin.1998@free.fr: array var in libc/mingw.sh, typos]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <b045ac08fc9eac2e5ee3.1352898499@blackmint>
Patchwork-Id: 198901
The extra CFLAGS override the product defaults, causing the product to
be built without optimisation or debug. Be explicit and add these in.
Reported-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Michael Hope <michael.hope@linaro.org>
Message-Id: <CANLjY-=3Gbio6nzUPhhevDHV7cUN=6Vigooe9nSf-RnGCqnjog@mail.gmail.com>
Patchwork-Id: 198808
While eglibc-2.16 recommends to use TI-RPC instead of the old sunrpc, the
old one can be included using a configure option. Since the user can still
use TI-RPC to override the libc implementation, we enable rpc unconditionally.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Message-Id: <20121102140404.GA7707@sig21.net>
Patchwork-Id: 196564
We now have the ability to use a custom location, so supporting
snapshots or custom date is no longer needed. Let the user do the
required preparation in this case.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
CT_DEBUG_INTERACTIVE is disabled when stdin, stdout or
stderr are redirected, but the check is only done at
the start of the build and doesn't catch when individual
build commands use redirection. When stdin is redirected
it will cause the debug shell to exit immediately, causing
and endless loop. Thus, save the stdin/our/err file handles
and restore them before invoking the debug shell.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Message-Id: <20121030102225.GA8303@sig21.net>
Patchwork-Id: 195409
This makes the patch name show up on the command line
logged by CT_DoExecLog so it's easier to see
what is going on. The -i for patch is specified
by Posix and supported by GNU patch and busybox patch.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
[yann.morin.1998@free.fr: remove now-useless debug message]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <20121030103620.GB8303@sig21.net>
Patchwork-Id: 195418
We now have the ability to use a custom local directory/tarball, so
it no longer makes sense to have the ability to use the CVS repository.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Since we now have the opportunity to use a custom local directory/tarball
as the source for gcc, it no longer makes sense to retrieve gcc ourselves
from its subversion repository.
Cc: Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
That's legacy code that was usefull when ncurses was installed
in the sysroot. Still it's not longer the case (it's installed
in a special dedicated directory), we can remove that piece of
code.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
CUSTOM_LOCATION config options only presented in menuconfig if component
CUSTOM version selected.
Change elf2flt CT_ELF2FLT_VERSION from 'head' to 'cvs' if cvs selected in config
Also remove hardcoded 'cvs-' from elf2flt component name, used in CT_Extract,
CT_Patch and as the CT_SRC_DIR location for the configure stage.
Signed-off-by: "David Holsgrove" <david.holsgrove@xilinx.com>
[yann.morin.1998@free.fr: fix indentation, don't patch custom dir location]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <288db3721a37844defa5.1349931196@localhost.localdomain>
PatchWork-Id: 190789
Since we added the debug-shell feature, CT_DoExecLog no longer
returns the error code of the command, but always return 0.
This breaks the download mechanism, which relies on CT_DoExecLog
to fail _on_purpose_ to detect that the ressource was not found
at the specified URL.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
So we get caught by the trap-handler and
have a chance to run the debug-shell.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Johannes Stezenbach <js@sig21.net>
Add an option that, when a command fails:
- starts an interactive shell with the failed command's environment
- attempts re-execution of the failed command, continues, or aborts
at user's whim.
Before starting the debug-shell, the backtrace is printed.
When exiting for an abort, the standard error message is printed.
Based on an idea and a patch from: Johannes Stezenbach <js@sig21.net>
http://sourceware.org/ml/crossgcc/2012-09/msg00144.html
Signed-off-by: Johannes Stezenbach <js@sig21.net>
[yann.morin.1998@free.fr: integrate in the fault handler]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Johannes Stezenbach <js@sig21.net>
Patchwork-Id: 191571
Patchwork-Id: 191668
Avoid error when commands in scripts/crosstool-NG.sh fail
before CT_BUILD_DIR is set.
So we need to remove the backtrace marker of a potential previous
build. Previously, it was implicitly removed because we did remove
the directory it was in, which is no longer the case.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
[yann.morin.1998@free.fr: remove backtrace marker on start of build]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <20121015094615.GA18673@sig21.net>
Patchwork-Id: 191498
It's been a long time the default work-dir changed its name
from 'target' to '.build'.
Change the left-over.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Currently, extract and patch are skipped as thus:
- using a custom directory of pre-installed headers
- a correctly named directory already exists
Otherwise, extract and patch are done.
The current second condition is wrong, because it allows the following
sequence to happen:
- a non-custom kernel is used
- a previous build only partially extracted the non-custom sources
- that p[revious build broke during extraction (eg. incomplete tarball...)
- a subsequent build will find a properly named directory, and will
thus skip extract and patch, which is wrong
Fix that by following the conditions in this table:
Type | Extract | Patch
----------------------+---------+-------
Pre-installed headers | N | N
custom directory | N | N
custom tarball | Y | N
mainstream tarball | Y | Y
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: David Holsgrove <david.holsgrove@xilinx.com>
Config options remain the same as before, just generalised to be used by other
components also.
Signed-off-by: "David Holsgrove" <david.holsgrove@xilinx.com>
[yann.morin.1998@free.fr: fix indentation, fix comment]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <50674fe47431174aab80.1349931193@localhost.localdomain>
PatchWork-Id: 190786
Add a generic custom location infrastructure (inspired by the one in
kernel/linux) to allow the user to use custom tarballs or directories
for any component.
Signed-off-by: "David Holsgrove" <david.holsgrove@xilinx.com>
[yann.morin.1998@free.fr: move config option, improve help text, fix API doc]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <131c163c69f9cc81d2be.1349931191@localhost.localdomain>
PatchWork-Id: 190784
Message-Id: <0bbaba9190a76ba97f72.1349931192@localhost.localdomain>
PatchWork-Id: 190785
Previous import from patchwork missed one hunk (in cset #d8feb93b3e49)
Apply it now.
Signed-off-by: "David Holsgrove" <david.holsgrove@xilinx.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Patchwork-Id: 189053
Attempting to ${CT_TARGET}-gcc -print-multi-lib will fail
In do_cc_core_backend, for the final compiler in a canadian cross
baremetal, warn that multi-libs cannot be determined
In do_cc_backend, for either final compiler for a canadian cross,
warn that multi-libs cannot be determined
(Plus fixed CT_PREFIX_DIR in do_cc_backend to be ${prefix})
Signed-off-by: "David Holsgrove" <david.holsgrove@xilinx.com>
Message-Id: <CAM=EW8aQDoNx-CkJHjXBoDP4iTDJ8z5hh3=KhO5UTU6rp3Pj=w@mail.gmail.com>
Patchwork-Id: 189053
--with-expat=yes is unconditionally passed to the gdb configure
stage, instead of respecting the ${do_expat} decision.
Disable if not needed. Prevents error building canadian cross;
configure: error: expat is missing or unusable
Where configure stage fails to find expat on the host compiler.
Signed-off-by: "David Holsgrove" <david.holsgrove@xilinx.com>
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Message-Id: <4c4410a2a8aab24a29c5.1349244128@localhost.localdomain>
PatchWork-Id: 188711
GCC requires m68k arch tuples to be *-*-uclinux-* to support Linux on
no-mmu m68k (ColdFire) cpus.
Blackfin arch tuple must be *-*-linux-uclibc for FD_PIC_ELF toolchains,
so we cannot just switch to uclinux for no-mmu Linux toolchains.
Signed-off-by: "Esben Haabendal" <esben@haabendal.dk>
Message-Id: <876271s1ee.fsf@arh128.prevas.dk>
PatchWork-Id: 186976
If either LIBRARY_PATH or LPATH is set, even to the empty string,
the gcc build breaks.
Fix that by bailing-out rather than re-setting.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
These environment variables set search path for gcc at link time, which can break the build.
Signed-off-by: Erik Inge Bolsø <knan-ct@anduin.net>
Message-Id: <alpine.BSF.2.00.1205130131550.21551@anduin.net>
PatchWork-Id: 186872
build fails to symlink to custom kernel dir when the build is not the first time
because of 'ln -s' without '-f' option.
Signed-off-by: "Jang, Bongseo" <graycells@gmail.com>
Message-ID: <543e2981f2b723ecd850.1348370892@localhost.localdomain>
PatchWork-ID: 186178
Add Microblaze architecture support.
This depends on EXPERIMENTAL, as upstream projects do not yet
include full support to build a modern microblaze compiler.
This is in the process of being updated, but is not currently
publicly accessible.
Signed-off-by: "David Holsgrove" <david.holsgrove@xilinx.com>
Message-Id: <9c93e18b3d68b19303f3.1348113870@localhost.localdomain>
PatchWork-ID: 185305
Currently, if downloads are forbidden, the mirror is still tried for.
Change this way:
- if downlaods forbidden, do not try neither upstream locations nor mirror
- add option to only use the mirror, and avoid upstream locations
Signed-off-by: Austin Morton <austinpmorton@gmail.com>
[yann.morin.1998@free.fr: broaden the if USE_MIRRORto enclode mirror location]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
I took some of the svn functionality from eglibc.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
[yann.morin.1998@free.fr: fix the conditional test in build script]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
That comes from way back when nothing would work as expected, and I would
easily get heated as soon as anything would break. Sigh, those were the
old days.
Apologies.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
For expat, duma, and strace, use the generic url and 302 to the mirror
instead of trying to download a file from a downed mirror and
failing.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Message-Id: <b69ebeb72fef93c04c84.1345364051@flambe.is-a-geek.org>
Whatever the threading model (NPTL, LT...), we build the same
core pass-1 compiler, so there is no need to have a case-esac
construct.
Remove now mis-leading and incorect comment.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
New binutils (circa 2.2x?) append 'program interpreter' to the
(NEEDED) line for the dynamic linker, which breaks our current
pattern.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Both core pass-1 and -2 compilers are unconditionally built,
so we no longer require a condition variable.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Up until now, all conditions requiring a core pass-1 was when the
threading implementation used was NPTL. So we only built the core
pass-1 when NPTL was used.
Now, things have changed (what? when? Dunno...), and some bare-metal
canadian toolchains fail to build if a core pass-1 is not present.
OTOH, a core pass-1, although not needed for non-NPTL builds, does
no harm at all if it is present.
So, unconditionally build a core pass-1 (but still pass conditional
options to the core backend).
Reported-by: Per Arnold Blaasmo <Per-Arnold.Blaasmo@atmel.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
