Installing the gcc test-suite can take a bit of time, so the
progress bar is currently not rotating because there is no
output during the copy. For an unsuspecting user, it could
mean the process hung.
With 'cp -v', the progress bar now rotates.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Konrad submitted an initial patch adding multlib support:
http://sourceware.org/ml/crossgcc/2011-11/msg00040.html
The patch was full of good ideas, but had a few issues, so
I (Yann E. MORIN) started it all from scatch, re-using part
of the original patch. This got implemented in this series:
hg log -r 446a17b5dd1e:e47d17391ae3
As I forgot to credit Konrad in these changelogs, update the
docs so that the work by Konrad gets credited. Without his
initial effort, we would probably not have had multlib support
so soon. Thank you Konrad!
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When doing multilib, we only need the headers from the default variant,
but we need the startfiles for each variants.
Allow the frontend to specify either one, or both.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
For mutlilib, the C library must be built once for each variants.
Special care must be taken to put the resulting libraries in
the proper places.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When building a multilib variant, install in a separate directory, to
avoid clutering the default or any other variant.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When building a multilib, some extra CFLAGS can override the
default config option. This is the case for the endianness
selection.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When building a multilib, some extra CFLAGS can override the
default config option. This is the case for the floating point
selection.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When building multilib, we need extra CFLAGS that tell the compiler
to use non-default settings (eg. big/little endian, hard/soft float,
-march/cpu/tune flags, and so on...).
We have to pass these flags to the build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The caller SHALL explicitly ask for a nmode, and not rely on a default mode.
That's what actually happens, so we can get rid of the default.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add a toolchain-wide option to enable multilib.
This is currently a noop, and will be implemented
in subsequent patches for each impacted components.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In some cases, it might be desirable to use the system zlib
Eg. because latest gcc seem to be totally borked when it comes
to multilib, and tries to build a multilib host zlib, when it
is *absolutely* *not* needed: we want mulitlib on the target,
not on the host! Sigh... :-(
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The localedef of eglibc 2.14 requires NOT_IN_libc to be defined in order to
compile intl/l10nflist.c.
This is because localedef is built separately from eglibc and uses some parts of
eglibc that don't compile in standalone without this preprocessor definition.
This fixes the following error:
[ALL ] gcc -g -O2 -DNO_SYSCONF -DNO_UNCOMPRESS
-DLOCALE_PATH='"/usr/lib/locale:/usr/share/i18n"'
-DLOCALEDIR='"/usr/lib/locale"' -DLOCALE_ALIAS_PATH='"/usr/share/locale"'
-DCHARMAP_PATH='"/usr/share/i18n/charmaps"'
-DREPERTOIREMAP_PATH='"/usr/share/i18n/repertoiremaps"'
-DLOCSRCDIR='"/usr/share/i18n/locales"' -Iglibc/locale/programs -Iglibc/locale
-I/<snip>/.build/src/eglibc-localedef-2_14/include
-I/<snip>/.build/src/eglibc-localedef-2_14 -I.
-include /<snip>/.build/src/eglibc-localedef-2_14/include/always.h -Wall
-Wno-format -c -o locarchive.o glibc/locale/programs/locarchive.c
[ALL ] glibc/locale/programs/locarchive.c: In function 'enlarge_archive':
[ALL ] glibc/locale/programs/locarchive.c:303:21: warning: variable
'oldlocrectab' set but not used [-Wunused-but-set-variable]
[ALL ] In file included from glibc/locale/programs/locarchive.c:651:0:
[ALL ] glibc/locale/programs/../../intl/l10nflist.c: In function
'_nl_normalize_codeset':
[ERROR] glibc/locale/programs/../../intl/l10nflist.c:342:9: error:
'_nl_C_locobj_ptr' undeclared (first use in this function)
[ALL ] glibc/locale/programs/../../intl/l10nflist.c:342:9: note: each
undeclared identifier is reported only once for each function it appears in
[ALL ] glibc/locale/programs/locarchive.c: In function
'add_locales_to_archive':
[ALL ] glibc/locale/programs/locarchive.c:1450:7: warning: passing argument
1 of '__xpg_basename' discards 'const' qualifier from pointer target type
[enabled by default]
[ALL ] /usr/include/libgen.h:35:14: note: expected 'char *' but argument is
of type 'const char *'
[ERROR] make[1]: *** [locarchive.o] Error 1
Signed-off-by: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
Signed-off-by: Zhenqiang Chen <zhenqiang.chen@linaro.org>
[yann.morin.1998@anciens.enib.fr: copy with a single call to 'cp']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Dumping the backtrace has been broken since changeset #652e56d6d35a:
scripts: execute each steps in a subshell
We can spawn sub-sub-shells in some cases.
The way the fault handler works is to dump the backtrace, but to avoid
printing it once for every sub-shell (which could get quite confusing),
it simply exits when it detects that it is being run in a sub-shell,
leaving to the top-level shell the work to dump the backtrace.
Because each step is executed in its own sub-shell, the variable arrays
that contain the step name, the source file and line number, are lost
when exiting the per-step sub-shell.
Hence, the backtrace is currently limited to printing only the top-level
main procedure of the shell.
Fix this thus:
- when dumping the bckatraces for the steps & the functions, remember
it was dumped, and only dump it if it was not already dumped
- at the top-level shell, print the hints
Also, rename the top-level step label.
Reported-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The changeset 2467 #200836977ce6 missed renaming one occurrence of
CT_BINUTILS_EXTRA_CONFIG to CT_BINUTILS_EXTRA_CONFIG_ARRAY, which is fixed by
this patch.
Signed-off-by: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
Some distributions (eg. openSUSE 12.1) systematically export
the CONFIG_SITE environment variable to point to a custom
script setting misc paths for ./configure.
This can, and does, break when cross-compiling for architectures
that are not supported by this script.
The simple workaround is to unset this variable.
NB: buildroot has a similar fix:
http://git.buildroot.org/buildroot/commit/?id=12c9f7dd6dee9c6029b4f9a12d6aac1516911ab4
Reported-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Some longterm versions are not in the usual directory.
Account for these new locations.
Get rid of the mirror location, now that the main kernel site is
(almost) back to normal operations.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"${CT_SYSROOT_DIR}/usr/include" is only for "${CT_USE_SYSROOT}" = "y".
We should also mkdir when "${CT_USE_SYSROOT}" != "y".
"${CT_HEADERS_DIR}" can support both cases.
Signed-off-by: Zhenqiang Chen <zhenqiang.chen@linaro.org>
CT_SHELL is undefined.
Thus, the generated wrapper scripts are not executable by the kernel
because they do not contain a valid interpreter.
Use CT_CONFIG_SHELL instead.
Signed-off-by: "Titus von Boxberg" <titus@v9g.de>
Do not prompt for the type of floating-point support, if the
architecture did not explicitly stated that it did support it.
Reported-by: Morten Thunberg Svendsen <mts@doredevelopment.dk>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Changeset #149c33923f47 broke the architectures that do not
support the --with-float=X ./configure flag (in gcc). For example,
x86_64 does not support it.
Add a new blind config option that architectures can set to tell
they support floating point selection.
Reported-by: Morten Thunberg Svendsen <mts@doredevelopment.dk>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
First, 'SUPPORT' should be spelled 'SUPPORTS'.
Second, 'SUPPORT_XXX' really means 'supports --with-xxx', so rename the
affected options accordingly. Update the affected archs to match the new
namings.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
With hard-coded "-O", users can not customize CFLAGS_FOR_TARGET
by CT_TARGET_CFLAGS. If "-O" is needed, users can input it in
CT_TARGET_CFLAGS. By default, "-Os" is enabled.
Signed-off-by: Zhenqiang Chen <zhenqiang.chen@linaro.org>
Signed-off-by: Zhenqiang Chen <zhenqiang.chen@linaro.org>
[yann.morin.1998@anciens.enib.fr: prompt rewording, as suggested by M. Hope]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Otherwise, users have to input --disable-libstdcxx-pch option
when building bare-metal CANADIAN C++ compiler.
Reviewed-by: Michael Hope
Signed-off-by: Zhenqiang Chen <zhenqiang.chen@linaro.org>
