Rename those three variables to properly reflect their purpose: decide
whether we need to download/extract gdb/libexpat/libncurses, not whether
we need to build them or not.
This is only a rename for now, subsequent changes will further
fix this mess.
Reported-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The menu system provides an option to allow a user to request newlib
version 2.0.0. newlib-2.0.0, however, is not available at the download
location currently being used. It is, however, available (as are other
supported versions of newlib) at an alternate location.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Message-Id: <75ab5151c7f5dc9086e3.1362334313@suse64>
Patchwork-Id: 224561
In case we only download or extract the sources, do not fail while
finishing the toolchain: the test-suite directory may not exist, so
we can't chmod it.
Also, use safer constructs that won't trigger the 'set -e' in case of
failure (eg.: "[ ... ] && ..." is not safe in case the test fails).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
For some architectures, it is legit to have an alternate value in the
'architecture' part of the tuple. For example:
armv5te-*
armv7a8-*
Besides, some packages expect the tuple to reflect the arch variant
(eg. openMPI) to detect the variant's capabilities (eg. atomic
primitives).
This patch adds an option for the user to specify a suffix to be added
to the arch-part of the tuple.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Message-ID: <20130120225822.GS6838@1wt.eu>
Patch-Id: 213994
[yann.morin.1998@free.fr: make it a suffix, not an override]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Running as root is really, really dangerous.
Add a runtime-check that refuses to build if running as root.
Can be overriden with a double switch in the menuconfig.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Toolchains that use the hard-float ABI now are to be denoted by a tuple
ending in *eabihf, while the prevbious *eabi is now an indication that
the toolchain uses the softfloat ABI.
This is purely a cosmetic thing, for distros to differentiate their
hardfloat-ABI ports from their softfloat-ABI ports.
(note: softfloat ABI does not mean that it is using softfloats; it can
be using hardfloat instructions, but using the softfloat ABI).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The one was missing from the list.
It is very improbable that we ever need it, as elf2flt does no release,
and we always get it from CVS head. But for the sake of consistency, we
just add it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
While most components have their version in the .in file, some
have it in the .in.2 (eg. elf2flt).
Currently, to handle this case, we indiscriminately munge both files,
but this is wrong: in the elf2flt case, if we add a binutils version,
we do not want it to be added to elf2flt, and conversely.
So, for each tool, we need to explicitly know what file to munge.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Well, all eglibc version we support do, and latest glibc versions
we support do.
Not all glibc versions do, but older versions simply ignore the
unrecognised ./configure flags.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Since unrecognised ./configure flags are simply ignored,
we can always pass --enable-obsolete-rpc.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Since we've had the debug shell feature, fd #7 is now used to
redirect stderr, while it was previously unused.
Use fd #9 to redirect stdout.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
ppl-0.10.x does not build with gcc-4.6+, as it uses constructs that were
warnings with gcc-4.5 and before, but are now errors with gcc-4.6 and
above.
Fix that by passing -fpermissive in CFLAGS for ppl 0.10.
Reported-by: Jeremy Rosen <jeremy.rosen@openwide.fr>
Reported-by: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
xldd uses sed and grep as detected by ./configure. This works well if is
used on the machine that build the toolchain.
But if the user moves the toolchain to another machine where sed and grep
are not in the same directory (eg. /bin/sed vs. /usr/bin/sed), then xldd
will stop functionning.
Fix that by using ${SED} and ${GREP} if they are set in the environment.
Reported-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In gcc-'s core and final passes, do not print 'core' or 'final' in
log messages. We already print it in step messages.
Also, as we use the core backend to build the bare-metal final gcc,
it can be disturbing to read 'core' while we're in fact in 'final'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
It is used for skipping unnecessary compilation steps when the libc
doesn't need to be compiled (eg. when we do not use a C library).
Signed-off-by: Yann Diorcet <diorcet.yann@gmail.com>
Message-Id: <150eadb0117e697d79aa.1353625025@blackmint>
Patchwork-Id: 201222
Properly catch resuming the build when continuing past the
failed command.
The 'case ;;&' construct is a bash4ism. Get rid of it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The current mechanism to check if static linking is possible, and the mesage
displayed on failure, can be puzzling to the unsuspecting user.
Also, the current implementation is not using the existing infrastructure,
and is thus difficult to enhance with new tests.
So, switch to using the standard CT_DoExecLog infra, and use four tests to
check for the host compiler:
- check we can run it
- check it can build a trivial program
- check it can statically link that program
- check if it statically link with libstdc++
That should cover most of the problems. Hopefully.
(At the same time, fix a typo in a comment)
Signed-off-by: Daniel Price <daniel.price@gmail.com>
[yann.morin.1998@free.fr: split original patch for self-contained changes]
[yann.morin.1998@free.fr: use steps to better see gcc's output]
[yann.morin.1998@free.fr: commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <163f86b5216fc08c672a.1353459722@nipigon.dssd.com>
Patchwork-Id: 200536
Signed-off-by: Daniel Price <daniel.price@gmail.com>
[yann.morin.1998@free.fr: split original patch for self-contained changes]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <163f86b5216fc08c672a.1353459722@nipigon.dssd.com>
Patchwork-Id: 200536
Rework binutils in order to provide soon binutils alternative.
Signed-off-by: Yann Diorcet <diorcet.yann@gmail.com>
[yann.morin.1998@free.fr: split up original patch for self-contained changes]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <d3d1d51f399e6d2c1163.1353320546@macbook-smorlat.local>
Patchwork-Id: 199971
On some hosts, and for certain toolchains (eg. toolchain targetting
the upcoming Darwin), it may be necessary to pass arbitrary CFLAGS
and/or LDFLAGS when building the components.
And necessary infrastructure:
- EXTRA_{CFLAGS,LDFLAGS}_FOR_{BUILD,HOST} as config options
- pass those extra flags to components
Fix-up a slight typo in elf2flt at the same time (misnamed cflags).
Signed-off-by: Yann Diorcet <diorcet.yann@gmail.com>
Message-Id: <d24043276c9243a35421.1353077450@macbook-smorlat.local>
Patchwork-Id: 199645
sstrip has been obsoleted for a while now, as it's still broken
for some archs, and there seems to be no incentive to fix it
upstream. Besides, the space gained with sstrip is marginal at
best.
Signed-off-by: Yann Diorcet <diorcet.yann@gmail.com>
Message-Id: <65c8bf534d0647ce52cd.1353320545@macbook-smorlat.local>
Patchwork-Id: 199970
Use the same method as companion tools for providing generic and
extendable companion libs.
Signed-off-by: Yann Diorcet <diorcet.yann@gmail.com>
Message-Id: <515c5c4635d99ebe4877.1353074410@macbook-smorlat.local>
Patchwork-Id: 199613
Replace the 32-bit-only mingw32 with mingw-w64 that is capable
of building toolchains for both 32-bit and 64-bit Windows.
kernel/mingw: replace mingw32 with generic Windows
kernel/windows: New windows kernel supporting 32 and 64 bit arch
libc/mingw: Remove old options
patches: Remove old mingw libc options' patches
Signed-off-by: "Yann Diorcet" <diorcet.yann@gmail.com>
[yann.morin.1998@free.fr: array var in libc/mingw.sh, typos]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <b045ac08fc9eac2e5ee3.1352898499@blackmint>
Patchwork-Id: 198901
The extra CFLAGS override the product defaults, causing the product to
be built without optimisation or debug. Be explicit and add these in.
Reported-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Michael Hope <michael.hope@linaro.org>
Message-Id: <CANLjY-=3Gbio6nzUPhhevDHV7cUN=6Vigooe9nSf-RnGCqnjog@mail.gmail.com>
Patchwork-Id: 198808
While eglibc-2.16 recommends to use TI-RPC instead of the old sunrpc, the
old one can be included using a configure option. Since the user can still
use TI-RPC to override the libc implementation, we enable rpc unconditionally.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Message-Id: <20121102140404.GA7707@sig21.net>
Patchwork-Id: 196564
We now have the ability to use a custom location, so supporting
snapshots or custom date is no longer needed. Let the user do the
required preparation in this case.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
CT_DEBUG_INTERACTIVE is disabled when stdin, stdout or
stderr are redirected, but the check is only done at
the start of the build and doesn't catch when individual
build commands use redirection. When stdin is redirected
it will cause the debug shell to exit immediately, causing
and endless loop. Thus, save the stdin/our/err file handles
and restore them before invoking the debug shell.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Message-Id: <20121030102225.GA8303@sig21.net>
Patchwork-Id: 195409
This makes the patch name show up on the command line
logged by CT_DoExecLog so it's easier to see
what is going on. The -i for patch is specified
by Posix and supported by GNU patch and busybox patch.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
[yann.morin.1998@free.fr: remove now-useless debug message]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <20121030103620.GB8303@sig21.net>
Patchwork-Id: 195418
We now have the ability to use a custom local directory/tarball, so
it no longer makes sense to have the ability to use the CVS repository.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Since we now have the opportunity to use a custom local directory/tarball
as the source for gcc, it no longer makes sense to retrieve gcc ourselves
from its subversion repository.
Cc: Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
That's legacy code that was usefull when ncurses was installed
in the sysroot. Still it's not longer the case (it's installed
in a special dedicated directory), we can remove that piece of
code.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
CUSTOM_LOCATION config options only presented in menuconfig if component
CUSTOM version selected.
Change elf2flt CT_ELF2FLT_VERSION from 'head' to 'cvs' if cvs selected in config
Also remove hardcoded 'cvs-' from elf2flt component name, used in CT_Extract,
CT_Patch and as the CT_SRC_DIR location for the configure stage.
Signed-off-by: "David Holsgrove" <david.holsgrove@xilinx.com>
[yann.morin.1998@free.fr: fix indentation, don't patch custom dir location]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <288db3721a37844defa5.1349931196@localhost.localdomain>
PatchWork-Id: 190789
Since we added the debug-shell feature, CT_DoExecLog no longer
returns the error code of the command, but always return 0.
This breaks the download mechanism, which relies on CT_DoExecLog
to fail _on_purpose_ to detect that the ressource was not found
at the specified URL.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
So we get caught by the trap-handler and
have a chance to run the debug-shell.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Johannes Stezenbach <js@sig21.net>
Add an option that, when a command fails:
- starts an interactive shell with the failed command's environment
- attempts re-execution of the failed command, continues, or aborts
at user's whim.
Before starting the debug-shell, the backtrace is printed.
When exiting for an abort, the standard error message is printed.
Based on an idea and a patch from: Johannes Stezenbach <js@sig21.net>
http://sourceware.org/ml/crossgcc/2012-09/msg00144.html
Signed-off-by: Johannes Stezenbach <js@sig21.net>
[yann.morin.1998@free.fr: integrate in the fault handler]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Johannes Stezenbach <js@sig21.net>
Patchwork-Id: 191571
Patchwork-Id: 191668
Avoid error when commands in scripts/crosstool-NG.sh fail
before CT_BUILD_DIR is set.
So we need to remove the backtrace marker of a potential previous
build. Previously, it was implicitly removed because we did remove
the directory it was in, which is no longer the case.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
[yann.morin.1998@free.fr: remove backtrace marker on start of build]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <20121015094615.GA18673@sig21.net>
Patchwork-Id: 191498
It's been a long time the default work-dir changed its name
from 'target' to '.build'.
Change the left-over.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Currently, extract and patch are skipped as thus:
- using a custom directory of pre-installed headers
- a correctly named directory already exists
Otherwise, extract and patch are done.
The current second condition is wrong, because it allows the following
sequence to happen:
- a non-custom kernel is used
- a previous build only partially extracted the non-custom sources
- that p[revious build broke during extraction (eg. incomplete tarball...)
- a subsequent build will find a properly named directory, and will
thus skip extract and patch, which is wrong
Fix that by following the conditions in this table:
Type | Extract | Patch
----------------------+---------+-------
Pre-installed headers | N | N
custom directory | N | N
custom tarball | Y | N
mainstream tarball | Y | Y
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: David Holsgrove <david.holsgrove@xilinx.com>
Config options remain the same as before, just generalised to be used by other
components also.
Signed-off-by: "David Holsgrove" <david.holsgrove@xilinx.com>
[yann.morin.1998@free.fr: fix indentation, fix comment]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <50674fe47431174aab80.1349931193@localhost.localdomain>
PatchWork-Id: 190786
Add a generic custom location infrastructure (inspired by the one in
kernel/linux) to allow the user to use custom tarballs or directories
for any component.
Signed-off-by: "David Holsgrove" <david.holsgrove@xilinx.com>
[yann.morin.1998@free.fr: move config option, improve help text, fix API doc]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <131c163c69f9cc81d2be.1349931191@localhost.localdomain>
PatchWork-Id: 190784
Message-Id: <0bbaba9190a76ba97f72.1349931192@localhost.localdomain>
PatchWork-Id: 190785
Previous import from patchwork missed one hunk (in cset #d8feb93b3e49)
Apply it now.
Signed-off-by: "David Holsgrove" <david.holsgrove@xilinx.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Patchwork-Id: 189053
Attempting to ${CT_TARGET}-gcc -print-multi-lib will fail
In do_cc_core_backend, for the final compiler in a canadian cross
baremetal, warn that multi-libs cannot be determined
In do_cc_backend, for either final compiler for a canadian cross,
warn that multi-libs cannot be determined
(Plus fixed CT_PREFIX_DIR in do_cc_backend to be ${prefix})
Signed-off-by: "David Holsgrove" <david.holsgrove@xilinx.com>
Message-Id: <CAM=EW8aQDoNx-CkJHjXBoDP4iTDJ8z5hh3=KhO5UTU6rp3Pj=w@mail.gmail.com>
Patchwork-Id: 189053
--with-expat=yes is unconditionally passed to the gdb configure
stage, instead of respecting the ${do_expat} decision.
Disable if not needed. Prevents error building canadian cross;
configure: error: expat is missing or unusable
Where configure stage fails to find expat on the host compiler.
Signed-off-by: "David Holsgrove" <david.holsgrove@xilinx.com>
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Message-Id: <4c4410a2a8aab24a29c5.1349244128@localhost.localdomain>
PatchWork-Id: 188711
GCC requires m68k arch tuples to be *-*-uclinux-* to support Linux on
no-mmu m68k (ColdFire) cpus.
Blackfin arch tuple must be *-*-linux-uclibc for FD_PIC_ELF toolchains,
so we cannot just switch to uclinux for no-mmu Linux toolchains.
Signed-off-by: "Esben Haabendal" <esben@haabendal.dk>
Message-Id: <876271s1ee.fsf@arh128.prevas.dk>
PatchWork-Id: 186976
If either LIBRARY_PATH or LPATH is set, even to the empty string,
the gcc build breaks.
Fix that by bailing-out rather than re-setting.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
These environment variables set search path for gcc at link time, which can break the build.
Signed-off-by: Erik Inge Bolsø <knan-ct@anduin.net>
Message-Id: <alpine.BSF.2.00.1205130131550.21551@anduin.net>
PatchWork-Id: 186872
build fails to symlink to custom kernel dir when the build is not the first time
because of 'ln -s' without '-f' option.
Signed-off-by: "Jang, Bongseo" <graycells@gmail.com>
Message-ID: <543e2981f2b723ecd850.1348370892@localhost.localdomain>
PatchWork-ID: 186178
Add Microblaze architecture support.
This depends on EXPERIMENTAL, as upstream projects do not yet
include full support to build a modern microblaze compiler.
This is in the process of being updated, but is not currently
publicly accessible.
Signed-off-by: "David Holsgrove" <david.holsgrove@xilinx.com>
Message-Id: <9c93e18b3d68b19303f3.1348113870@localhost.localdomain>
PatchWork-ID: 185305
Currently, if downloads are forbidden, the mirror is still tried for.
Change this way:
- if downlaods forbidden, do not try neither upstream locations nor mirror
- add option to only use the mirror, and avoid upstream locations
Signed-off-by: Austin Morton <austinpmorton@gmail.com>
[yann.morin.1998@free.fr: broaden the if USE_MIRRORto enclode mirror location]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
I took some of the svn functionality from eglibc.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
[yann.morin.1998@free.fr: fix the conditional test in build script]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
That comes from way back when nothing would work as expected, and I would
easily get heated as soon as anything would break. Sigh, those were the
old days.
Apologies.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
For expat, duma, and strace, use the generic url and 302 to the mirror
instead of trying to download a file from a downed mirror and
failing.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Message-Id: <b69ebeb72fef93c04c84.1345364051@flambe.is-a-geek.org>
Whatever the threading model (NPTL, LT...), we build the same
core pass-1 compiler, so there is no need to have a case-esac
construct.
Remove now mis-leading and incorect comment.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
New binutils (circa 2.2x?) append 'program interpreter' to the
(NEEDED) line for the dynamic linker, which breaks our current
pattern.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Both core pass-1 and -2 compilers are unconditionally built,
so we no longer require a condition variable.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Up until now, all conditions requiring a core pass-1 was when the
threading implementation used was NPTL. So we only built the core
pass-1 when NPTL was used.
Now, things have changed (what? when? Dunno...), and some bare-metal
canadian toolchains fail to build if a core pass-1 is not present.
OTOH, a core pass-1, although not needed for non-NPTL builds, does
no harm at all if it is present.
So, unconditionally build a core pass-1 (but still pass conditional
options to the core backend).
Reported-by: Per Arnold Blaasmo <Per-Arnold.Blaasmo@atmel.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Because we now patch configure.in and configure, the Makefile quicks
in a re-build rule as the source files are now more recent than the
bundled generated files, and that fails because the m4 directory
is missing, although on some systems where aclocal is not installed,
the re-build rule does nothing (except a warning).
Always create tht directory.
Reported-by: Per Arnold Blaasmo <per-arnold.blaasmo@atmel.com>
[Also thanks to Thomas De Schampheleire <patrickdepinguin@gmail.com>
for some digging works on this issue]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Since we use defconfigs to save the samples, listing all the
samples can no longer be done by passing all the sample names
at one to the script; we need to pass them one-by-one after
we expand the sample's defconfig ibnto a complete .config.
Reported-by: Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
gdbserver >= 7.2 comes with an optional library to use tracepoints, the
In Process Agent (IPA) library, libinproctrace.so.
Currently, we build gdbserver staticaly, but that breaks the build of
the IPA lib.
Add an option to biuld the IPA lib, but not if statically linking.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Now that we are using defconfig files, the samples do not contain
the full configuration, so we can not simply parse them to show
their content.
Instead, we must fake recalling a sample, and parse the generated
.config file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When saving a sample, use savedefconfig instead of copying
the full .config file.
This reduces the saved .config, and reduces clutter when it
is later upgraded.
Also use defconfig when retrieving a sample.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
POSIX 1003.1-2008 does not say whether "set -e" should catch a sub-shell
that exits with !0 (it has a list of conditions to catch, but no list of
conditions not to catch, and this situation is not listed).
bash-3 does not catch such a failure, but bash-4 does. That why, on my
Squeeze system I did not see the issue, while Thomas did on is Lenny chroot.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
During application development it is desirable to enable malloc
debugging and LD_DEBUG support, but the extensive debug spew from
SUPPORT_LD_DEBUG_EARLY is only useful when working on
uClibc's ld.so.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Autoconf can determine that the correct install command includes flags,
e.g., "/usr/bin/install -c". When using this as a command, we can't
enclose the value in double-quotes, as that makes some shells use the
whole expression as a filename:
# this is the value returned by autoconf and stored in CT_install
$ ins="/usr/bin/install -c"
# if we call it with quotes, the command is not found
$ "${ins}"
bash: /usr/bin/install -c: No such file or directory
# removing the quotes lets it work as expected
$ ${ins}
/usr/bin/install: missing file operand
Try `/usr/bin/install --help' for more information.
Signed-Off-By: Anthony Foiani <anthony.foiani@gmail.com>
When updating a sample configuration with a comment, a dot '.'
in the new comment keeps the previous comment.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Currently, we rely on an existing external cross-compiler targetting
the target, to build the C library.
This can pause quite a few problems if that compiler is different from
the one we are building, because it could introduce some ABI issues.
This patch removes this dependency, by building the core compilers
as we do for standard cross, and also by building the binutils and
gcc, for running on the build machine.
This means we no longer need to offer the cross-sompiler selection in
the menuconfig.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Bizarrely enough, the core gcc are not enough to be able to build a
canadian cross, and a real, full cross compiler is required so that
the canadian cross can be properly built... WTF?!? Sigh...
Add a build-frontend, as was done for the binutils and the complibs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Do for the final step the same as for the core step: compute the list
of selected langauages from the frontend, not in the backend.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
As the core backend can be used to also build the bare-metal compiler,
we have to tel it what languages to build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add a function that prepares the language configure option.
It is needed in at least two places, some commonalisation is needed. ;-)
Unfortunately, it is no longer possible to print warnings about experimental
languages any more. Anyway, the experimental status is clearly indicated
in the menuconfig. so it should not be a surprise if the build breaks. :-/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
It's easier to have as much as possible stuff in the same place to
ease backup/restore, and make things easier to follow.
Move the host companion libraries install dir as a sub-dir of the
build-tools install dir (but not directly in it, it would break
for canadian or cross-native).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
A few noop fix-ups:
- fix the comments in core pass-1
- commonalise settings that can be
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In canadian-cross, we need the companion libraries running on the
build machine, to be able to build the two core gcc.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In canadian-cross, we need binutils running on the build machine to be
able to build the target C library.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Move the actual complibs codes to backend functions that builds the
required combo of build/host/target as requested by a frontend.
This split is currently a no-op, but is required for the upcoming
canadian-cross rework, where we'll be needing to build the complibs
twice, one for build/build, and one for build/host.
This applies to the six companion libraries:
- GMP
- MPFR
- PPL
- Cloog/PPL
- MPC
- libelf
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Move the actual binutils code to a backend function that builds the
required combo of build/host/target as requested by a frontend.
This split is currently a no-op, but is required for the upcoming
canadian-cross rework, where we'll be needing to build two binutils,
one for build/build/target, and one for build/host/target.
This applies to the three binutils:
- GNU binutils
- elf2flt
- sstrip
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The core compilers are used to build the C library, so they
should always run on the build machine, not on the host.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
There really is no good reason to install the core compilers in their
own places, one for each pass. We can install them with the other
build tools.
Also, this implies that:
- there are fewer directories to save/restore
- there are fewer symlinks to create for binutils
- the PATH is shorter
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When building a canadian-cross, the binutils are not executable on
the build machine, so there is no point in installing the symlinks
in the gcc static/shared install dirs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
strace upstream location has slightly changed.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Since anciens.enib.fr has been dead for two months now, without any
hope of recovery, update my e-mail to point to @free.fr instead.
Reported-by: "Bryan Hundven" <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The build dir are created depending on the host (host for that specific
backend, not host for the toolchain). Only the frontends know what host
this is, so only the frontends can create non-ambiguous dirs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
A lot of places are currently doing:
mkdir -p foo/bar
cd foo/bar
Or even:
mkdir -p foo/bar
pushd foo/bar
[...]
popd
Provide both wrapper to ease doing this.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The only user of the static core compiler in pass-1 was the newlib
C library. Now that it is build in a later step, we do no longer
need to build a static core compiler in pass-1.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Currently, newlib is built in the start_file step, which is wrong, but was
needed when the baremetal integration was... well, 'unfinished'.
Now that we build the baremetal compiler from the final cc step, and a
proper core gcc in pass-1 and pass-2, we can move the newlib build to the
step do_libc, where it belongs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In case we build a baremetal compiler, use the standard passes:
- core_cc is used to build the C library;
- as such, it is meant to run on build, not host;
- the final compiler is meant to run on host;
As the current final compiler step can not build a baremetal compiler,
call the core backend from the final step.
NB: Currently, newlib is built during the start_files pass, so we have
to have a core compiler by then... Once we can build the baremetal
compiler from the final cc step, then we can move the newlib build to
the proper step, and then get rid of the core pass-1 static compiler...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Currently, we issue the bare-metal compiler from the pass_1 & pass_2
core compilers, because the final gcc breaks while doing so.
This implies we have to build some libces during the start_files step,
instead of the standard libc step. This is the case for newlib.
By adding a backend/frontend infra to the final gcc, we can abstract
what backend to call: the standard backend for non-bare-metal gcc,
and the core backend for bare-metal.
This patch is just an no-op, it just adds the final backend and
frontend without changing the way bare-metal is built, to come in a
subsequent patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
As the core backend is used to generate the bare-metal compiler,
we need to pass it the host CFLAGS.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Tell the core compiler what host it should run on (instead of
hard-coding runing on CT_HOST).
No functional change so far, switching between CT_HOST and CT_BUILD
will come in a following patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Currently, the discrimination on the core compilers prefixes depends on
the type of core compiler to build.
This is not correct, and the caller of the core backend should specify
the prefix.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In case of canadian-cross, the companion libraries are not the same for
the core cc (they run on 'build') as they are for the final cc (they run
on 'host').
Prepare for this differentiation (coming later), while retaining the
current behavior (to use the same compblibs).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Rename the core backend function to do_cc_core_backend, to
make it explicit it is a backend.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The core backend is going to have more parameters in the upcoming
patches, so it will be a bit complex to handle.
Introduce an array-variable that is filled by the different code-paths
with the required values.
This makes the code easier to read and maintain.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The current construct consumes the parameters while we parse them.
Change this to a construct that does not consume the parameters.
This has no impact on gcc, but is done for homogeneity with other
components (eg. glibc).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Currently, there are two constructs used to parse arguments in
glibc backends, one that consumes args as they are parsed, and
one that does not.
Always use the construct that does not eat args as they are parsed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
It seems sourceforge changed yet again the way to download files.
This time, no longer use their 'mesh' thingy, and hard-code the
server to use in the URL... Sigh... :-(
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Now that ./configure is generated by autoconf, it must be generated
before the release tarball is made. So, we can not simply use hg's
archive, we must post-process it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
sim was already disabled for CT_GDB_NATIVE.
Reviewed-by: Michael Hope
Signed-off-by: Zhenqiang Chen <zhenqiang.chen@linaro.org>
[yann.morin.1998@anciens.enib.fr: make it a config option]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In Ubuntu 11.04 and 11.10, the default options for ld have changed.
--no-copy-dt-needed-entries and --as-needed are now enabled by default, which
causes errors like:
[EXTRA] Checking CLooG/ppl
[DEBUG] ==> Executing: 'make' '-j3' '-s' 'check'
[ALL ] Making check in .
[ALL ] config.status: creating include/cloog/cloog-config.h
[ALL ] config.status: include/cloog/cloog-config.h is unchanged
[ALL ] libtool: link: i686-build_pc-linux-gnu-gcc -Wall -fomit-frame-pointer
-pipe -o cloog cloog.o -L/<snip>/build/static/lib ./.libs/libcloog.a -lm
/<snip>/build/static/lib/libppl_c.a /<snip>/build/static/lib/libpwl.a
/<snip>/build/static/lib/libppl.a /<snip>/build/static/lib/libgmpxx.a
/<snip>/build/static/lib/libgmp.a -lstdc++
[ALL ] /usr/bin/ld: /<snip>/build/static/lib/libppl.a(MIP_Problem.o):
undefined reference to symbol 'sqrt@@GLIBC_2.0'
[ALL ] /usr/bin/ld: note: 'sqrt@@GLIBC_2.0' is defined in DSO
/usr/lib/gcc/i686-linux-gnu/4.6.1/../../../i386-linux-gnu/libm.so so try adding
it to the linker command line
[ALL ] /usr/lib/gcc/i686-linux-gnu/4.6.1/../../../i386-linux-gnu/libm.so:
could not read symbols: Invalid operation
[ALL ] collect2: ld returned 1 exit status
[ERROR] make[2]: *** [cloog] Error 1
[ERROR] make[1]: *** [check-recursive] Error 1
See:
https://wiki.ubuntu.com/NattyNarwhal/ToolchainTransition
This patch fixes these errors by placing '-lm' at the right place on the command
line as libppl requires libm when linking cloog.
Signed-off-by: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
In the process of converting to autoconf, the kconfig option
were not properly translated.
Fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The tools found by the new autostuff configure can contain arguments,
for example: grep -E
This needs separating the paths set for the Makfile from the paths
set for the scripts.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Create configure.ac, an autoconf script to generate ./configure
This will be needed by a subsequent patch to properly handle
--build and --host, and more tests, when the kconfig stuff will
be installed pre-built.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Installing the gcc test-suite can take a bit of time, so the
progress bar is currently not rotating because there is no
output during the copy. For an unsuspecting user, it could
mean the process hung.
With 'cp -v', the progress bar now rotates.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When doing multilib, we only need the headers from the default variant,
but we need the startfiles for each variants.
Allow the frontend to specify either one, or both.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
For mutlilib, the C library must be built once for each variants.
Special care must be taken to put the resulting libraries in
the proper places.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When building a multilib variant, install in a separate directory, to
avoid clutering the default or any other variant.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When building a multilib, some extra CFLAGS can override the
default config option. This is the case for the endianness
selection.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When building a multilib, some extra CFLAGS can override the
default config option. This is the case for the floating point
selection.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When building multilib, we need extra CFLAGS that tell the compiler
to use non-default settings (eg. big/little endian, hard/soft float,
-march/cpu/tune flags, and so on...).
We have to pass these flags to the build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The caller SHALL explicitly ask for a nmode, and not rely on a default mode.
That's what actually happens, so we can get rid of the default.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In some cases, it might be desirable to use the system zlib
Eg. because latest gcc seem to be totally borked when it comes
to multilib, and tries to build a multilib host zlib, when it
is *absolutely* *not* needed: we want mulitlib on the target,
not on the host! Sigh... :-(
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The localedef of eglibc 2.14 requires NOT_IN_libc to be defined in order to
compile intl/l10nflist.c.
This is because localedef is built separately from eglibc and uses some parts of
eglibc that don't compile in standalone without this preprocessor definition.
This fixes the following error:
[ALL ] gcc -g -O2 -DNO_SYSCONF -DNO_UNCOMPRESS
-DLOCALE_PATH='"/usr/lib/locale:/usr/share/i18n"'
-DLOCALEDIR='"/usr/lib/locale"' -DLOCALE_ALIAS_PATH='"/usr/share/locale"'
-DCHARMAP_PATH='"/usr/share/i18n/charmaps"'
-DREPERTOIREMAP_PATH='"/usr/share/i18n/repertoiremaps"'
-DLOCSRCDIR='"/usr/share/i18n/locales"' -Iglibc/locale/programs -Iglibc/locale
-I/<snip>/.build/src/eglibc-localedef-2_14/include
-I/<snip>/.build/src/eglibc-localedef-2_14 -I.
-include /<snip>/.build/src/eglibc-localedef-2_14/include/always.h -Wall
-Wno-format -c -o locarchive.o glibc/locale/programs/locarchive.c
[ALL ] glibc/locale/programs/locarchive.c: In function 'enlarge_archive':
[ALL ] glibc/locale/programs/locarchive.c:303:21: warning: variable
'oldlocrectab' set but not used [-Wunused-but-set-variable]
[ALL ] In file included from glibc/locale/programs/locarchive.c:651:0:
[ALL ] glibc/locale/programs/../../intl/l10nflist.c: In function
'_nl_normalize_codeset':
[ERROR] glibc/locale/programs/../../intl/l10nflist.c:342:9: error:
'_nl_C_locobj_ptr' undeclared (first use in this function)
[ALL ] glibc/locale/programs/../../intl/l10nflist.c:342:9: note: each
undeclared identifier is reported only once for each function it appears in
[ALL ] glibc/locale/programs/locarchive.c: In function
'add_locales_to_archive':
[ALL ] glibc/locale/programs/locarchive.c:1450:7: warning: passing argument
1 of '__xpg_basename' discards 'const' qualifier from pointer target type
[enabled by default]
[ALL ] /usr/include/libgen.h:35:14: note: expected 'char *' but argument is
of type 'const char *'
[ERROR] make[1]: *** [locarchive.o] Error 1
Signed-off-by: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
Signed-off-by: Zhenqiang Chen <zhenqiang.chen@linaro.org>
[yann.morin.1998@anciens.enib.fr: copy with a single call to 'cp']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Dumping the backtrace has been broken since changeset #652e56d6d35a:
scripts: execute each steps in a subshell
We can spawn sub-sub-shells in some cases.
The way the fault handler works is to dump the backtrace, but to avoid
printing it once for every sub-shell (which could get quite confusing),
it simply exits when it detects that it is being run in a sub-shell,
leaving to the top-level shell the work to dump the backtrace.
Because each step is executed in its own sub-shell, the variable arrays
that contain the step name, the source file and line number, are lost
when exiting the per-step sub-shell.
Hence, the backtrace is currently limited to printing only the top-level
main procedure of the shell.
Fix this thus:
- when dumping the bckatraces for the steps & the functions, remember
it was dumped, and only dump it if it was not already dumped
- at the top-level shell, print the hints
Also, rename the top-level step label.
Reported-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The changeset 2467 #200836977ce6 missed renaming one occurrence of
CT_BINUTILS_EXTRA_CONFIG to CT_BINUTILS_EXTRA_CONFIG_ARRAY, which is fixed by
this patch.
Signed-off-by: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
Some distributions (eg. openSUSE 12.1) systematically export
the CONFIG_SITE environment variable to point to a custom
script setting misc paths for ./configure.
This can, and does, break when cross-compiling for architectures
that are not supported by this script.
The simple workaround is to unset this variable.
NB: buildroot has a similar fix:
http://git.buildroot.org/buildroot/commit/?id=12c9f7dd6dee9c6029b4f9a12d6aac1516911ab4
Reported-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Some longterm versions are not in the usual directory.
Account for these new locations.
Get rid of the mirror location, now that the main kernel site is
(almost) back to normal operations.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"${CT_SYSROOT_DIR}/usr/include" is only for "${CT_USE_SYSROOT}" = "y".
We should also mkdir when "${CT_USE_SYSROOT}" != "y".
"${CT_HEADERS_DIR}" can support both cases.
Signed-off-by: Zhenqiang Chen <zhenqiang.chen@linaro.org>
CT_SHELL is undefined.
Thus, the generated wrapper scripts are not executable by the kernel
because they do not contain a valid interpreter.
Use CT_CONFIG_SHELL instead.
Signed-off-by: "Titus von Boxberg" <titus@v9g.de>
With hard-coded "-O", users can not customize CFLAGS_FOR_TARGET
by CT_TARGET_CFLAGS. If "-O" is needed, users can input it in
CT_TARGET_CFLAGS. By default, "-Os" is enabled.
Signed-off-by: Zhenqiang Chen <zhenqiang.chen@linaro.org>
Signed-off-by: Zhenqiang Chen <zhenqiang.chen@linaro.org>
[yann.morin.1998@anciens.enib.fr: prompt rewording, as suggested by M. Hope]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Otherwise, users have to input --disable-libstdcxx-pch option
when building bare-metal CANADIAN C++ compiler.
Reviewed-by: Michael Hope
Signed-off-by: Zhenqiang Chen <zhenqiang.chen@linaro.org>
Add support for building the HTML and PDF manuals for the major
components. Implement for binutils, GCC, GDB, and GLIBC.
Always build all manuals and install a subset. Be explicit about the
subset to reduce the clutter and to avoid getting copies of common
manuals like bfd from all of the sourceware based components. Downside of
being explicit is that you need to update it when a new component
comes along.
Build the manuals as part of the last GCC build, namely 'cc' for glibc
based ones and cc_core_pass_2 for baremetal.
An example of the output is at:
http://people.linaro.org/~michaelh/incoming/crosstool-NG/
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: depends on ! remove docs; gold manual install]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In the early days, cloog-ppl was bizarrely packaged: the first tarball
did not contain the version in the name of the extracted directory, so
we had to play tricks.
Nowadays, however, the first component of the path are stripped when
extracting a tarball, which means that the created directory will
always be properly named. So, our old tricks do no longer work, and
worse, they break the build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
ncurses 5.9 wants tic to be either one of:
- $TIC_PATH
- /usr/bin/tic
Of course, se do not want the latter, for it can be incompatible if the
ncurses in the build system is too old (eg. RHEL 5.6, Debian Lenny...).
So, force TIC_PATH to the location of our own tic.
Also, install tic alongside the other build tools, not in a sub-dir
of the toolchain installation dir.
Signed-off-by: Willy Tarreau <w@1wt.eu>
[yann.morin.1998@anciens.enib.fr: install in builtools/bin, move TIC_PATH]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Some architectures support a mixed hard/soft floating point, where
the compiler emits hardware floating point instructions, but passes
the operands in core (aka integer) registers.
For example, ARM supports this mode (to come in the next changeset).
Add support for softfp cross compilers to the GCC and GLIBC
configuration. Needed for Ubuntu and other distros that are softfp.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: split the original patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When hardfloat is selected, we need to pass that selection down to
./configure and in the CFLAGS.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: split the original patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
With the upcoming softfp support, the case..esac test would become
a bit convoluted if it were to test three different booleans.
Introduce a new blind string config option that defaults to the
selected floating point type used.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: split the original patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
CT_EXTRA_FLAGS_FOR_HOST needs a preceding space to separate it from
any other options that have already been set.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
It's been a while now that crosstool-NG has been hosted on it's own
website, and not at my home. Change every reference to the old site
to the new one, everywhere is makes sense to.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Changeset #7c288c777455 broke the tuple for uClibc-based
powerpc toolchains, by unconditionally forcing CT_TARGET_SYS
to "gnu".
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Change CT_ExtractGit so that it clones the repository, instead of just
symlinking it. After cloning, any given ref is checked out, or if no
ref is given, the HEAD of the repository is checked out.
This makes CT_Extract behave similar for git repositories as it does
for tarballs, so that it for example can be used for passing glibc-ports
as a git repository.
Signed-off-by: "Esben Haabendal" <esben.haabendal@prevas.dk>
[yann.morin.1998@anciens.enib.fr: fix incomplete var rename]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Currently, we check host feature in ./configure. This works only for
cross toolchains, but not for canadian toolchains. ./configure has
absolutely no way to know what the host for the toolchain will be;
only the build scripts know.
So, move the headers & libraries checks from ./configure to the build
scripts, early enough in the build, but not before we know the host
compiler and other tools.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
To avoid variable leakage from one step to another, isolate the
steps from each others by running them in their own sub-shell.
This avoids variables leaking from one step to the others.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Tremendously helps when running on at least Ubuntu, with dash as
the system shell (ie. /bin/sh points to dash).
Reported by a few people, of which:
leming, ccct and ccole on IRC
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add a new option to enable/disable the Python scripting in gdb.
Hide the option (ie. disable it) when statically linking the cross-gdb.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Allow the user to configure extra flags to pass to the host compiler
at build time. Applies to both C and C++.
Useful on Ubuntu to turn off the stack protector and fortify defaults
so the program stands a better chance of running on other distros.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: put the custom flags at the end]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The GOLD linker is written in C++. Pass CT_CFLAGS_FOR_HOST as
CXXFLAGS to configure so that any host specific flags are passed
through.
It feels a bit funny passing CFLAGS as CXXFLAGS, but the PPL and GCC
target rules already do the same.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
When CT_PARALLEL_JOBS is -1, set the number of parallel jobs to the
number of online CPUs + 1. Update documentation to match.
I find this useful when building in the cloud. You can use the same
.config file and have the build adapt to the number of processors
available. Limited testing shows that NCPUS+1 is faster than NCPUS+0
or NCPUS+2.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
Allows using either a tarball or a directory as the custom kernel
source location.
Signed-off-by: Vincent BENOIT <sinseman44@gmail.com>
[yann.morin.1998@anciens.enib.fr: fix space damage, detailed commit message]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Since kernel.org is dead, and there is no announced or known estimated
time or return to normality, it is impossible to download any kernel at
this time.
Add a known-working mirror.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Even if the current process is highly parallel, crosstool-NG spends most
of its time in single-job steps on fast machines (with a 12-CPU system,
I approximate the parallel vs. non-parallel time to be in the order os
1 to 3; that is crostool-NG spends two-thirds of its time running
non-parallel jobs).
Some steps to build gcc can be paralleled, gaining a litle bit of time
on the whole compilation.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Virtually all FTP server available on-line support passive FTP.
At least, this is the case for the servers crosstool-NG needs to
connect to.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Currently, we use either wget or curl, whichever is installed.
In case both are installed, both are used. This means that it
takes a while trying all extensions.
Remove use of wget, and use only curl.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The sysroot prefix dir was broken in #4960f5d9f829 due to a mishap
when making the out-of-sysroot lib/ symlink: the './' was mistakenly
changed into a single '.' .
Although Jonathan suggested restoring the missing '/' to restore it to
normal operation, I prefered using an explicit pushd/popd to be extra
sure of the symlink location and target, along with a fix in the sysroot
relative directory calculation.
Reported-by: Jonathan Grundon <JGrundon@xos.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Allows to choose if one wants to keep or not the syscalls that are provided with
newlib. It passes the --disable-newlib-supplied-syscalls or
--enable-newlib-supplied-syscalls to the configure script. If one chooses to
disable the builtin syscalls, he/she will have to write his/her own. This can
be usefull to port newlib to a new platform/board.
Signed-off-by: Kévin PETIT <kpet@free.fr>
Some packages are available as LZMA tarballs. LZMA is a relatively recent
compression algorithm; it's slightly better than bzip2, but offers much
faster decompression. LZMA is now deprecated in favor of XZ, but some
packages switched to LZMA when XZ was not yet available, or still in its
infancy. Latest XZ (which totaly obsoletes LZMA) offers a backward LZMA-
compatible utility, so we can check for 'lzma' nonetheless.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
HOST_OS really is the target OS. Allow setting it for configure
via an environment variable.
libltrace.a should have an index:
Allow ar to be set as an environment variable, and generate
an index in this lib.
Reported-by: "Guylhem Aznar" <crossgcc@guylhem.net>
Signed-off-by: "Titus von Boxberg" <titus@v9g.de>
Because we need our own host tic, we have to build it; and we do build
it statically for now.
But as MacOS/Darwin/Whatever-you-call-it does not support static linking
(what a shame!), it fails.
Anyway, we don't really care it being shared, in the end.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The custom-tarball symlink was created in CT_SRC_DIR, when it
should be created in CT_TARBALLS_DIR.
Reported-by: Guylhem Aznar <crossgcc@guylhem.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The script that is installed, and which sole purpose is to dump
the .config that was used to build the toolchain, is pure insanity.
Let's make it much, much more simpler...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
./configure does check for the presence of gz and bzip2, so we can
safely use them in the build scripts.
On the other hand, more recent formats (eg. XZ) are not yet widely
available, and we do not want, and can't, force the user to install
them as a pre-requisite.
So, build up a list of allowed tarball formats based on the available
decompressors. For no, this is a static list, but the upcoming XZ
support will conditionnaly add to this list.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Simplify the way the custom tarball is handled:
- fake version="custom"
- at download, simply link the custom tarball to:
"linux-custom.${custom_extension}"
- at extract, the above allows to simply extract "linux-${LINUX_VERSION}"
where LINUX_VERISON is set to the fake version="custom"
Not that much convoluted, in fact... :-/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Although ctor/dtor do not seem strictly required, missing them proves
rather inconvenient, as ld can't link binaries.
Reported-by: John Spencer <maillist-uclibc@barfooze.de> (sh4rm4 on IRC)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When downloading via svn/cvs/... an attempt to retrieve from the
mirror is made. If the mirror does not have the required tarball,
an error message is printed. This is misleading, as the download
may later succeed via svn/cvs/...
Remove the messages about failed downloads altogether.
At the same time, use "if ... then ... fi" instead of "... && ..."
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
This is needed later, when we'll conditionnally use both the
upstream and the mirror URLs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Currently, the mirror can be used either:
- as a fallback in case upstream is unavailable (default behavior)
- as the preferred source for downloads
But the most common use-case seems to provide a truely-LAN mirror
to speed up downloads in big corpos', and/or provide a 'trusted'
source for the tarballs.
So, make the following changes;
- if a mirror is specified, always try that before trying upstream
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The cvs download helper looks for the local tarballs dir to see if it
can find a pre-downloaded tarball, and if it does not find it, does
the actual fetch to upstream via cvs.
In the process, it does not even try to get a tarball from the local
mirror, which can be useful if the mirror has been pre-populated
manually (or with a previously downloaded tree).
Fake a tarball get with the standard tarball-download helper, but
without specifying any upstream URL, which makes the helper directly
try the LAN mirror.
Of course, if no mirror is specified, no URL wil be available, and
the standard cvs retrieval will kick in.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The svn download helper looks for the local tarballs dir to see if it
can find a pre-downloaded tarball, and if it does not find it, does
the actual fetch to upstream via svn.
In the process, it does not even try to get a tarball from the local
mirror, which can be useful if the mirror has been pre-populated
manually (or with a previously downloaded tree).
Fake a tarball get with the standard tarball-download helper, but
without specifying any upstream URL, which makes the helper directly
try the LAN mirror.
Of course, if no mirror is specified, no URL wil be available, and
the standard svn retrieval will kick in.
Reported-by: ANDY KENNEDY <ANDY.KENNEDY@adtran.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When retrieving tarballs from upstream, if no URL was given, do not
fail; simmply ignore that fact.
This will be used later when the SVN helper will call the standard
helper to try the LAN mirror before trying svn.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
do_libc_locales_extract() and do_libc_locales() in glibc-eglibc.sh-common have
been overridden for both glibc and eglibc, so they can now be removed, which
this patch does.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
This patch adds partial support for glibc locales.
For now, it only generates the appropriate locales when the host and the target
have the same endianness and uint32_t alignment.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
This patch adds a common glibc/eglibc infrastructure to build and install the
libc locales.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
Someof the mingw32 source tarballs have an appended '-src' after the
version.
Since changeset #6e1412ba8da9 (scripts/functions: force extract folder
to archive basename), it means mingw tarballs get extracted in a directory
ending with '-src'.
Fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Now that we akways extract the tarballs in a sane location (see changeset
#6e1412ba8da9: scripts/functions: force extract folder to archive basename),
the uClibc snapshot dir now has the date (as version) in it, eg.:
uClibc-20100710
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Samples should contain kconfig-parsable definitions, not script variables.
.config.2 contains bash arrays, which is definitely not kconfig-safe...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Some archives like those of the 2011.07 revisions of Linaro GCC contain a folder
name different from the archive basename, which leads to errors afterwards, e.g.
when patching. E.g.:
gcc-linaro-4.5-2011.07.tar.bz2 extracts to gcc-linaro-4.5-2011.07-0/
This patch changes CT_Extract() to force the extraction of all archives to a
folder named like the archive basename. E.g.:
gcc-linaro-4.5-2011.07.tar.bz2 now extracts to gcc-linaro-4.5-2011.07/
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
Currently, no --enable-add-ons option is passed to libc configure when
"$(do_libc_add_ons_list ,)" is empty, which makes configure automatically search
for present add-ons. In that case, all present add-ons are built, although
no add-on was selected by the user in the config. Moreover, this can make the
configure fail if some non-standard add-ons like eglibc-localedef are present.
This behavior also leads to an inconsistency from a user point of view between
the following cases:
- LIBC_ADDONS_LIST="", LIBC_GLIBC_USE_PORTS=n and THREADS="none" in the config,
which makes "$(do_libc_add_ons_list ,)" return "", so all present add-ons
are built.
- LIBC_ADDONS_LIST="", LIBC_GLIBC_USE_PORTS=n and THREADS!="none" in the
config, which makes "$(do_libc_add_ons_list ,)" return the add-on supporting
the chosen threading implementation, e.g. "nptl", so only this add-on is
built.
This patch disables the building of all add-ons in that case.
It is still possible to build all present add-ons by adding --enable-add-ons to
LIBC_GLIBC_EXTRA_CONFIG_ARRAY.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
gdb needs to know where to find the libstdc++ helper python script
to do, well, whatever it has to do with it...
We can't install that in the user's ~/.gdbinit, it's too complex to
handle all the cases. Moreover, if the user is using more than one
toolchain, we can't put all that stuff in there...
Just provide a sample config file the user can adapt to his/her
own needs.
Thanks go to Khem RAJ for providing such a hint:
http://sourceware.org/ml/crossgcc/2011-07/msg00026.html
Reported-by: ANDY KENNEDY <ANDY.KENNEDY@adtran.com>
CC: Khem Raj <raj.khem@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The place to get 3.x has changed; the version scheme has changed.
No need to be overkill, just support 3.x; 4.x is not even dreamt of.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
If the user builds a toolchain over an existing one, so, without removing
CT_PREFIX_DIR, the build fails as the symlinks already exist, as does the
build.log.
This can also happen (for build.log) if the user first ran in download-
or extract-only.
Patch (with no SoB) originally from:
Phil Wilshire <phil.wilshire@overturenetworks.com>
Modified by me as it did not apply cleanly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
During the build, we create lib{32,64}/ symlinks out of the sysroot.
In some cases (eg. mingw32 target), these symlinks are still required
when running the toolchain. For other combinations, the symlinks are
without incidence, so they can be safely kept after the build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In case there's one lingering around (whether the previous build was
successful, or failed), we have to remove the buildtools directory
as well as the toochain build dir.
This should also fix the case where out makeinfo wrapper calls
itself recursively.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Maintaining thos multi-line shell commands in a Makefile rule is
a real PITA.
Move the two affected rules (build_gen_choice_in and build_gen_menu_in
to a shell script.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The new MIPS-specific options are not valid for other targets.
Also, move the arch-specific setting lower in the extra_config setting.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add the following MIPS specific options when configuring gcc:
--with(out)-llsc
--with(out)-synci
--with(out)-mips-plt
--with-divide=type
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add an option to specify the hash type that gcc will ask the linker to use.
It is a provision for the upcoming 4.7, as no version currently supports it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add an option to configure gcc with --enable-linker-build-id.
Reported-by: Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Instead of getting eglibc over standard svn://svn.eglibc.org
Add an option that allows the user to get source from
http://www.eglibc.org/svn
This is useful if you are behind a firewall or proxy.
If you are behind a proxy, don't forget to configure
${HOME}/.subversion/servers
In the [global] section setup your proxy configuration.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
[yann.morin.1998@anciens.enib.fr: removed useless 'default n']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
That option is coming from the original crosstool, and is not entirely
understand here.
Moreover, it breaks with newer gcc-s: 4.6.1 now breaks while configuring
libjava (and probably some other libs as well, untested).
There is an related bug report to the gcc BZ:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=49555
If need be, the old behavior can be restored with:
CC_CORE_EXTRA_CONFIG_ARRAY="--enable-symver=gnu"
CC_EXTRA_CONFIG_ARRAY="--enable-symver=gnu"
Reported-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Refactor the contents of 'do_libc_start_files()' and 'do_libc()' into a
parameterized 'do_libc_backend()'. 'do_libc_start_files()' and 'do_libc()'
call 'do_libc_backend()' with either 'libc_mode=startfiles' or
'libc_mode=final' (respectively) so that the startfiles/headers and
the final libc builds are configured and built with the same options.
One example of where this is needed is when building a mips toolchain.
Previously, if you were building an n32 toolchain, you wouldn't have
noticed an issue, because if '-mabi' is not in CFLAGS, n32 is the
default:
http://sourceware.org/git/?p=glibc-ports.git;a=blob;f=sysdeps/mips/preconfigure;hb=HEAD
But when trying to build an o32 or n64 toolchain the build would
have failed. This is because (e)glibc expects "-mabi={o32,n32,n64}" to be
in CFLAGS, but was not previously provided in 'do_libc_start_files()'.
The build failure would happen in the shared-core gcc when it tries to
configure an n64 or o32 gcc with an n32 libc.
A simpler solution would have been to just add TARGET_CFLAGS to configure
in 'do_libc_start_files()', but this way makes configure and make
consistent for both steps.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Cross-gdb depends on expat and python. If either is missing, cross-gdb will
build successfully, but lacking some features.
Especially, if expat is missing, cross-gdb will be unable to parse the target
description, which may lead to runtime malfunctions and the following GDB
warning:
"Can not parse XML target description; XML support was disabled at compile time"
Hence, expat should be considered mandatory.
On the other hand, the features missing without python are not critical, so
python should not be considered mandatory.
This patch does the following:
- At configure time, warn the user if either expat or python is missing.
- In menuconfig, disable the static build options regarding cross-gdb if no
static version of expat is available, and disable cross-gdb if expat is
missing.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
[yann.morin.1998@anciens.enib.fr: add comment for impossible static cross-gdb]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The NPTL add-on has always been internal, so there is no
reason to try downloading it, it will never succeed.
Add provision to skip other add-ons as well.
For consistency, do the same test in both glibc and eglibc.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"crosstool-NG-${CT_VERSION}" is currently the default for TOOLCHAIN_PKGVERSION,
and this options is passed as is to --with-pkgversion.
This patch prepends "crosstool-NG ${CT_VERSION}" to TOOLCHAIN_PKGVERSION before
passing it to --with-pkgversion.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
Some addons are bundled with glibc/eglibc, so we should not try to
download and extract them.
This is done as thus:
- at download time:
- if the add-on download fails, keep going;
- at extract time:
- if the addon is present in the source tree, ignore it;
- if the addon is missing in the source tree:
- if the archive is present, extract it;
- if the archive is missing, bail out.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
eglibc is only available from SVN. The script currently calls svn
in its own tortuous and convoluted way.
Use the egeneric SVN extract functions, and sinplify the eglibc
download function.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In case of eglibc, some add-ons that were previously external are
now internal (bundled with the main sources).
So we do not want to fail if an add-on can't be downloaded; we
want to post-pone the check until we can extract the main archive.
So:
- try to retrieve the add-on
- if it fails, print a warning instead of calling CT_Abort
- return 1
So, components that want to catch the error and want to handle it can,
while components that do not will gracefuly fail thanks to our catching
every errors.
Bonus: it works without changing any existing retrieval procedure! :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
For glibc/eglibc, if the add-on can not be extracted, we want to catch
the error to print a meaningful error message.
So:
- try to extract the tarball
- if it fails, print a waring instead of calling CT_Abort
- return 1
So, components that want to catch the error and want to handle it can,
while components that do not will gracefuly fail thanks to our catching
every errors.
Bonus: it works without changing any existing extract procedure! :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In case of glibc/eglibc, some add-ons that were previously external are
now internal (bundled with the main sources).
So we do not want to fail if an add-on tarball can't be downloaded; we
want to post-pone the check until we can extract the main archive.
So:
- try to download the tarball
- if it fails, print a warning instead of calling CT_Abort
- return 1
So, components that want to catch the error and want to handle it can,
while components that do not will gracefuly fail thanks to our catching
every errors.
Bonus: it works without changing any existing retrieval procedure! :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
This patch makes gdb benefit from the TOOLCHAIN_PKGVERSION and
TOOLCHAIN_BUGURL options.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
This patch makes eglibc benefit from the TOOLCHAIN_PKGVERSION and
TOOLCHAIN_BUGURL options.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
This patch makes binutils benefit from the TOOLCHAIN_PKGVERSION and
TOOLCHAIN_BUGURL options.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
This patch promotes the PKGVERSION and BUGURL options to toolchain level so that
all toolchain components supporting them can benefit from them.
These options are passed to configure through --with-pkgversion and
--with-bugurl.
They are supported by binutils 2.18+, gcc 4.3+, eglibc 2.9+ and gdb 7.0+.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
This patch adds a function to extract major, minor, revision, etc. from version
numbers.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
glibc and eglibc have a very similar extraction process, so it
makes sense to commonalise it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Fixes the issue with {e,}glibc addons having short and long names (such as
eglibc-ports-2_13 and ports), which caused configure scripts to run
through them twice and thus configuring incorrectly.
For instance, the mips64el-n32-linux-gnu toolchain would be recognized
correctly first, but then the second pass would change it to mips32,
building a mixed MIPS-III N32 and MIPS-I libc.
Signed-off-by: Nicolás Reynolds <fauno@kiwwwi.com.ar>
[yann.morin.1992@anciens.enib.fr: remove spurious trailing spaces]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
This patch sets the runtime sysroot to fix the following GDB warning:
"Unable to find dynamic linker breakpoint function.
GDB will be unable to debug shared library initializers
and track explicitly loaded dynamic code."
The sysroot can later be changed within gdb with the `set sysroot`
command if necessary.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
