The extra CFLAGS override the product defaults, causing the product to
be built without optimisation or debug. Be explicit and add these in.
Reported-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Michael Hope <michael.hope@linaro.org>
Message-Id: <CANLjY-=3Gbio6nzUPhhevDHV7cUN=6Vigooe9nSf-RnGCqnjog@mail.gmail.com>
Patchwork-Id: 198808
Refresh all samples against the new set of options, to be
sure they all build OK, before we can do the release.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Remove the sparc part, as it touches code that does not exist in
those versions of gcc (it was added at 4.6.2).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
CC: Florian Fainelli <f.fainelli@gmail.com>
Don't use options specific to FSF's coreutils install.
Signed-off-by: Titus von Boxberg <titus@v9g.de>
Message-Id: <51587db99510a9ec08f8.1352226968@tschetwerikow.boxberg.lan>
Patchwork-Id: 197532
While eglibc-2.16 recommends to use TI-RPC instead of the old sunrpc, the
old one can be included using a configure option. Since the user can still
use TI-RPC to override the libc implementation, we enable rpc unconditionally.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Message-Id: <20121102140404.GA7707@sig21.net>
Patchwork-Id: 196564
We now have the ability to use a custom location, so supporting
snapshots or custom date is no longer needed. Let the user do the
required preparation in this case.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
CT_DEBUG_INTERACTIVE is disabled when stdin, stdout or
stderr are redirected, but the check is only done at
the start of the build and doesn't catch when individual
build commands use redirection. When stdin is redirected
it will cause the debug shell to exit immediately, causing
and endless loop. Thus, save the stdin/our/err file handles
and restore them before invoking the debug shell.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Message-Id: <20121030102225.GA8303@sig21.net>
Patchwork-Id: 195409
This makes the patch name show up on the command line
logged by CT_DoExecLog so it's easier to see
what is going on. The -i for patch is specified
by Posix and supported by GNU patch and busybox patch.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
[yann.morin.1998@free.fr: remove now-useless debug message]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <20121030103620.GB8303@sig21.net>
Patchwork-Id: 195418
We now have the ability to use a custom local directory/tarball, so
it no longer makes sense to have the ability to use the CVS repository.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Since we now have the opportunity to use a custom local directory/tarball
as the source for gcc, it no longer makes sense to retrieve gcc ourselves
from its subversion repository.
Cc: Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
That's legacy code that was usefull when ncurses was installed
in the sysroot. Still it's not longer the case (it's installed
in a special dedicated directory), we can remove that piece of
code.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
CUSTOM_LOCATION config options only presented in menuconfig if component
CUSTOM version selected.
Change elf2flt CT_ELF2FLT_VERSION from 'head' to 'cvs' if cvs selected in config
Also remove hardcoded 'cvs-' from elf2flt component name, used in CT_Extract,
CT_Patch and as the CT_SRC_DIR location for the configure stage.
Signed-off-by: "David Holsgrove" <david.holsgrove@xilinx.com>
[yann.morin.1998@free.fr: fix indentation, don't patch custom dir location]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <288db3721a37844defa5.1349931196@localhost.localdomain>
PatchWork-Id: 190789
Since we added the debug-shell feature, CT_DoExecLog no longer
returns the error code of the command, but always return 0.
This breaks the download mechanism, which relies on CT_DoExecLog
to fail _on_purpose_ to detect that the ressource was not found
at the specified URL.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
So we get caught by the trap-handler and
have a chance to run the debug-shell.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Johannes Stezenbach <js@sig21.net>
Add an option that, when a command fails:
- starts an interactive shell with the failed command's environment
- attempts re-execution of the failed command, continues, or aborts
at user's whim.
Before starting the debug-shell, the backtrace is printed.
When exiting for an abort, the standard error message is printed.
Based on an idea and a patch from: Johannes Stezenbach <js@sig21.net>
http://sourceware.org/ml/crossgcc/2012-09/msg00144.html
Signed-off-by: Johannes Stezenbach <js@sig21.net>
[yann.morin.1998@free.fr: integrate in the fault handler]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Johannes Stezenbach <js@sig21.net>
Patchwork-Id: 191571
Patchwork-Id: 191668
Avoid error when commands in scripts/crosstool-NG.sh fail
before CT_BUILD_DIR is set.
So we need to remove the backtrace marker of a potential previous
build. Previously, it was implicitly removed because we did remove
the directory it was in, which is no longer the case.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
[yann.morin.1998@free.fr: remove backtrace marker on start of build]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <20121015094615.GA18673@sig21.net>
Patchwork-Id: 191498
It's been a long time the default work-dir changed its name
from 'target' to '.build'.
Change the left-over.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Currently, extract and patch are skipped as thus:
- using a custom directory of pre-installed headers
- a correctly named directory already exists
Otherwise, extract and patch are done.
The current second condition is wrong, because it allows the following
sequence to happen:
- a non-custom kernel is used
- a previous build only partially extracted the non-custom sources
- that p[revious build broke during extraction (eg. incomplete tarball...)
- a subsequent build will find a properly named directory, and will
thus skip extract and patch, which is wrong
Fix that by following the conditions in this table:
Type | Extract | Patch
----------------------+---------+-------
Pre-installed headers | N | N
custom directory | N | N
custom tarball | Y | N
mainstream tarball | Y | Y
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: David Holsgrove <david.holsgrove@xilinx.com>
This patch/workaround is similar to the one proposed in
http://www.mail-archive.com/uclibc@uclibc.org/msg02475.html
Bug reproduced with GCC 4.6.3.
[ALL ] In file included from libc/inet/inet_ntoa.c:8:0:
[ALL ] libc/inet/addr.c: In function 'inet_ntoa_r':
[ALL ] libc/inet/addr.c:135:1: warning: visibility attribute not supported in this configuration; ignored [-Wattri
butes]
[ERROR] libc/inet/addr.c:135:1: internal compiler error: in output_move_qimode, at config/m68k/m68k.c:3160
Signed-off-by: "Esben Haabendal" <esben@haabendal.dk>
Message-Id: <87sja4d1ke.fsf@arh128.prevas.dk>
Patchwork-Id: 187181
Config options remain the same as before, just generalised to be used by other
components also.
Signed-off-by: "David Holsgrove" <david.holsgrove@xilinx.com>
[yann.morin.1998@free.fr: fix indentation, fix comment]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <50674fe47431174aab80.1349931193@localhost.localdomain>
PatchWork-Id: 190786
Add a generic custom location infrastructure (inspired by the one in
kernel/linux) to allow the user to use custom tarballs or directories
for any component.
Signed-off-by: "David Holsgrove" <david.holsgrove@xilinx.com>
[yann.morin.1998@free.fr: move config option, improve help text, fix API doc]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <131c163c69f9cc81d2be.1349931191@localhost.localdomain>
PatchWork-Id: 190784
Message-Id: <0bbaba9190a76ba97f72.1349931192@localhost.localdomain>
PatchWork-Id: 190785
Previous import from patchwork missed one hunk (in cset #d8feb93b3e49)
Apply it now.
Signed-off-by: "David Holsgrove" <david.holsgrove@xilinx.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Patchwork-Id: 189053
Attempting to ${CT_TARGET}-gcc -print-multi-lib will fail
In do_cc_core_backend, for the final compiler in a canadian cross
baremetal, warn that multi-libs cannot be determined
In do_cc_backend, for either final compiler for a canadian cross,
warn that multi-libs cannot be determined
(Plus fixed CT_PREFIX_DIR in do_cc_backend to be ${prefix})
Signed-off-by: "David Holsgrove" <david.holsgrove@xilinx.com>
Message-Id: <CAM=EW8aQDoNx-CkJHjXBoDP4iTDJ8z5hh3=KhO5UTU6rp3Pj=w@mail.gmail.com>
Patchwork-Id: 189053
--with-expat=yes is unconditionally passed to the gdb configure
stage, instead of respecting the ${do_expat} decision.
Disable if not needed. Prevents error building canadian cross;
configure: error: expat is missing or unusable
Where configure stage fails to find expat on the host compiler.
Signed-off-by: "David Holsgrove" <david.holsgrove@xilinx.com>
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Message-Id: <4c4410a2a8aab24a29c5.1349244128@localhost.localdomain>
PatchWork-Id: 188711
kernel/linux: update revisions
Update Linux with the latest available revisions.
Signed-off-by: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
Message-Id: <efc60d787e571c37eef1.1349964870@advdt005-ubuntu>
PatchWork-Id: 190917
GCC requires m68k arch tuples to be *-*-uclinux-* to support Linux on
no-mmu m68k (ColdFire) cpus.
Blackfin arch tuple must be *-*-linux-uclibc for FD_PIC_ELF toolchains,
so we cannot just switch to uclinux for no-mmu Linux toolchains.
Signed-off-by: "Esben Haabendal" <esben@haabendal.dk>
Message-Id: <876271s1ee.fsf@arh128.prevas.dk>
PatchWork-Id: 186976
If either LIBRARY_PATH or LPATH is set, even to the empty string,
the gcc build breaks.
Fix that by bailing-out rather than re-setting.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
These environment variables set search path for gcc at link time, which can break the build.
Signed-off-by: Erik Inge Bolsø <knan-ct@anduin.net>
Message-Id: <alpine.BSF.2.00.1205130131550.21551@anduin.net>
PatchWork-Id: 186872
build fails to symlink to custom kernel dir when the build is not the first time
because of 'ln -s' without '-f' option.
Signed-off-by: "Jang, Bongseo" <graycells@gmail.com>
Message-ID: <543e2981f2b723ecd850.1348370892@localhost.localdomain>
PatchWork-ID: 186178
This is for when you failed to build gdb-native with the error:
gdb-7.4.1/gdb/linux-nat.h:79:18: error: field 'siginfo' has incomplete type"
This is from mirror://gentoo/distfiles/gdb-7.4.1-patches-2.tar.xz
Signed-off-by: "Jang, Bongseo" <graycells@gmail.com>
[yann.morin.1998@free.fr: refresh ptrace_setsiginfo patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-ID: <4eef2edec3201c50b420.1348370891@localhost.localdomain>
PatchWork-ID: 186179
crosstool-ng's glibc patche is made against glibc/libc sub-dir.
changeset 3052:06b663f297 is against glibc top-dir. it needs to split.
Signed-off-by: "Jang, Bongseo" <graycells@gmail.com>
[yann.morin.1998@free.fr: fix the ports patches depth]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-ID: <5040c8e83e35618361dc.1348370890@localhost.localdomain>
PatchWork-ID: 186177
