In the early days, cloog-ppl was bizarrely packaged: the first tarball
did not contain the version in the name of the extracted directory, so
we had to play tricks.
Nowadays, however, the first component of the path are stripped when
extracting a tarball, which means that the created directory will
always be properly named. So, our old tricks do no longer work, and
worse, they break the build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Using an '@' in the version string breaks the gcc/glibc/gdb manuals.
Use a scheme similar to Debian, with a plus '+' instead of the '@',
as suggested by Michael Hope.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In the very beginnings, eons ago, autotools also got confused by this
whole build vs. host vs. target, and got it wrong. Now they fixed it,
but they want to keep backward compatibility, so the --target is still
recongised, although ./configure will complain if you do so. It is
better to use --host.
Signed-off-by: "Trevor Woerner" <twoerner@gmail.com>
[yann.morin.1998@anciens.enib.fr: add build/host clarification]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
ncurses 5.9 wants tic to be either one of:
- $TIC_PATH
- /usr/bin/tic
Of course, se do not want the latter, for it can be incompatible if the
ncurses in the build system is too old (eg. RHEL 5.6, Debian Lenny...).
So, force TIC_PATH to the location of our own tic.
Also, install tic alongside the other build tools, not in a sub-dir
of the toolchain installation dir.
Signed-off-by: Willy Tarreau <w@1wt.eu>
[yann.morin.1998@anciens.enib.fr: install in builtools/bin, move TIC_PATH]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
As we use the directory names as Makefile targets, they can not contain any
column ':', or else make will complain about 'multiple target patterns'.
Replace the offending ':' with a dash '-', as Titus suggested.
Reported-by: Erdem Budak <erdembudak@hotmail.com>
Reported-by: Titus von Boxberg <titus@v9g.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Some projects are using (or planning to use) crosstool-NG, and are storing
it in their VCS, which might not be Mercurial. At the same time, those
projects may want to track development snapshots versions the way we do
with the Hg identity string (hg id).
Provide a way for these project to do so, without having to patch
./configure, and maintain that patch over-and-over again.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
ARM compilers can be built for soft float (software only, floats in
core registers), hard float (uses floating point instructions, floats
in FPU registers), or the half-way house softfp (uses floating point
instructions, floats in core registers).
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: split the original patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Some architectures support a mixed hard/soft floating point, where
the compiler emits hardware floating point instructions, but passes
the operands in core (aka integer) registers.
For example, ARM supports this mode (to come in the next changeset).
Add support for softfp cross compilers to the GCC and GLIBC
configuration. Needed for Ubuntu and other distros that are softfp.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: split the original patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When hardfloat is selected, we need to pass that selection down to
./configure and in the CFLAGS.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: split the original patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
With the upcoming softfp support, the case..esac test would become
a bit convoluted if it were to test three different booleans.
Introduce a new blind string config option that defaults to the
selected floating point type used.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: split the original patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
CT_EXTRA_FLAGS_FOR_HOST needs a preceding space to separate it from
any other options that have already been set.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
It's been a while now that crosstool-NG has been hosted on it's own
website, and not at my home. Change every reference to the old site
to the new one, everywhere is makes sense to.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Update all the samples, so that there is not config-prompt when
recalling samples. This is no upgrade, it's just about having
new options set (y or n) in the samples.
Also, get rid of the armeb-test_nptl-linux-uclibcgnueabi, it's no
longer needed, there's a non-test sample with uClibc NPTL, now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Changeset #7c288c777455 broke the tuple for uClibc-based
powerpc toolchains, by unconditionally forcing CT_TARGET_SYS
to "gnu".
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Change CT_ExtractGit so that it clones the repository, instead of just
symlinking it. After cloning, any given ref is checked out, or if no
ref is given, the HEAD of the repository is checked out.
This makes CT_Extract behave similar for git repositories as it does
for tarballs, so that it for example can be used for passing glibc-ports
as a git repository.
Signed-off-by: "Esben Haabendal" <esben.haabendal@prevas.dk>
[yann.morin.1998@anciens.enib.fr: fix incomplete var rename]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Currently, we check host feature in ./configure. This works only for
cross toolchains, but not for canadian toolchains. ./configure has
absolutely no way to know what the host for the toolchain will be;
only the build scripts know.
So, move the headers & libraries checks from ./configure to the build
scripts, early enough in the build, but not before we know the host
compiler and other tools.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
To avoid variable leakage from one step to another, isolate the
steps from each others by running them in their own sub-shell.
This avoids variables leaking from one step to the others.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Tremendously helps when running on at least Ubuntu, with dash as
the system shell (ie. /bin/sh points to dash).
Reported by a few people, of which:
leming, ccct and ccole on IRC
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add a new option to enable/disable the Python scripting in gdb.
Hide the option (ie. disable it) when statically linking the cross-gdb.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Allow the user to configure extra flags to pass to the host compiler
at build time. Applies to both C and C++.
Useful on Ubuntu to turn off the stack protector and fortify defaults
so the program stands a better chance of running on other distros.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: put the custom flags at the end]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Documented how to format description lines for packages patches.
Added a note on enforcing Signed-off-by lines.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: further describe the desc line]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The GOLD linker is written in C++. Pass CT_CFLAGS_FOR_HOST as
CXXFLAGS to configure so that any host specific flags are passed
through.
It feels a bit funny passing CFLAGS as CXXFLAGS, but the PPL and GCC
target rules already do the same.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
binutils 2.21 doesn't recognise the Cortex-M3 SVC instruction when
assembling with -mcpu=all. This was fixed by the 2.21.53 snapshot and
is needed to build RTOSs such as FreeRTOS.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
When CT_PARALLEL_JOBS is -1, set the number of parallel jobs to the
number of online CPUs + 1. Update documentation to match.
I find this useful when building in the cloud. You can use the same
.config file and have the build adapt to the number of processors
available. Limited testing shows that NCPUS+1 is faster than NCPUS+0
or NCPUS+2.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
Add 'build', 'build-*', and 'install' as phony targets to the top level
Makefile.
I tend to do everything in tree with the build in a directory called
'build'. This interfered with the target 'build', making it think the
target was up to date, and stopping scripts/crosstool-NG.sh from being
regenerated.
Added 'install' as I often set the prefix to $PWD/install.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
