Configure for for core GCC did not use Core gcc extra config.
Use now config variable CT_CC_GCC_CORE_EXTRA_CONFIG_ARRAY.
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
This commit adds support for the avr-libc C library.
According to the project page at http://www.nongnu.org/avr-libc , the
avr-libc package provides a subset of the standard C library for Atmel
AVR 8-bit RISC microcontrollers. In addition, the library provides the
basic startup code needed by most applications.
Support for this library in crosstool-ng is only enabled for the AVR
8-bit target.
The avr-libc manual and most distributions build the AVR 8-bit gcc
toolchain with the "avr" (non-canonical) target.
Some experimentation also led to the conclusion that other (canonical)
targets are not very well supported, so we force the "avr" target for
crosstool-ng as well.
The manual also recommends building avr-libc after the final gcc build.
To accomplish this with crosstool-ng, a new do_libc_post_cc step is
added, in which currently only avr-libc performs its build, and is a
no-op for the other libc options.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
This commit adds support for the Atmel AVR 8-bit RISC architecture.
This is the first 8-bit architecture to be added to crosstool-ng so the
configuration options for 8-bit architectures are added here as well.
gcc has had support for AVR for quite a while, at least since the 4.3
series for the currently popular ATmega microcontroler series.
The AVR architecture only supports bare-metal toolchains.
gcc for the AVR 8-bit architecture, usually referred to as avr-gcc, is
commonly used in conjunction with the avr-libc library which provides
additional resources for the Atmel AVR 8-bit microcontrollers.
avr-gcc can also be found as a supported package in some recent Linux
distributions.
This commit also closes#66
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
This option is old. GCC 4.3.x old. It isn't supported anymore, and just
confuses me. I'm not planning to support 4.3.x, or really anything older
then 4.7. So this option is gone to the wind.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit updates gcc's test suite to use the new config options.
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
Reviewed-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: Yann Diorcet <diorcetyann@gmail.com>
Update 300-gdb.sh to use the new config options.
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
Reviewed-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: Yann Diorcet <diorcetyann@gmail.com>
Update 100-gcc.sh to use the new config option names.
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
Reviewed-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: Yann Diorcet <diorcetyann@gmail.com>
This change updates the CC.* references to CC_GCC.* in the internal
scripts.
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
Reviewed-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: Yann Diorcet <diorcetyann@gmail.com>
This commit moves gcc.sh to 100-gcc.sh to accomodate for other
cross-compilers that crosstool-ng might be able to build.
The first, to come soon, is llvm/clang.
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
Reviewed-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: Yann Diorcet <diorcetyann@gmail.com>
The argument will prevent the prefix path from being added as an include path while building mingw. Having the prefix as an include path might cause all kinds of weird issues if prefix directory also exists on the build machine.
Signed-off-by: Nils Petter Eftedal <nilspetter@eftedal.org>
Added new functions to support changes in prefix and required vendor tuple for new versions of mingw.
Tested and verified with mingw version 2.0.7, 3.3.0 and 4.0-rc3.
Signed-off-by: Nils Petter Eftedal <nilspetter@eftedal.org>
Glibc actually does create a build executable. It's under sunrpc and it's
called cross-rpcgen. It uses gettext, so if that's not available in a standard
place on your system (for example if you're using Mac OS X and Homebrew), then
you are all out of luck.
Signed-off-by: Lawrence D'Anna <larry@elder-gods.org>
Without this canadion cross builds create invalid symlinks:
When the code in do_cc_core_backend is called there is no
${CT_TARGET}-gcc in the install directory. Therefore ext is empty and
we create a link to ${CT_TARGET}-gcc. The final compiler
step then installs ${CT_TARGET}-gcc.exe and creates a working
${CT_TARGET}-cc.exe symlink but we still keep the invalid link
as well.
Signed-off-by: Johannes Pfau <johannespfau@gmail.com>
Prirotize http downloads before ftp downloads.
By having http download first, those using proxy will work with the
current download mechnism.
This tells me that that mechnism needs to be updated.
(proxy support and/or kconfig toggles)
closes#3
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
glibc versions that don't support --with-pkgversion or --with-bugurl
will cause a harmless:
====================
configure: WARNING: unrecognized options: --with-bugurl...`
====================
If it's set, use it, if it's a recognized option.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
As posted on http://www.eglibc.org/
====================
EGLIBC is no longer developed and such goals are now being addressed
directly in GLIBC.
====================
I'm not interested in maintaining build support for unsupported
software.
Older branches of crosstool-ng continue to have eglibc support.
If you find issues with older branches, I'm always open to pull
requests.
Removing eglibc also frees up glibc cleanup and build optimization.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
We had following problem: We're building a toolchain with an old glibc
version for compatibility with old Linux distributions (glibc 2.9). This
version requires make < 4 to build. However, the configure script of
glibc looks for make in the order "gnumake", "gmake" and "make". So when
"gmake" is available in the system (which is the case on Gentoo Linux
per default, unfortunately), then configure finds the system gmake 4.1
instead of the ct-ng make 3.82.
This patch adds an option to install a symlink so that 'gmake' is also
available in the old version when building toolchains.
Signed-off-by: Bernhard Walle <bernhard@bwalle.de>
Canadian Cross compile for baremetal fails with error;
checking for the value of EOF... configure: error: computing EOF failed
which is due to libstdc++ configure not being able to find stdio.h
Having all modes of the core compiler copyheaders from CT_HEADERS_DIR
(in combination with previous patch for newlib to add a do_libc_start_files
function to copy into the CT_HEADERS_DIR) resolves this.
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
Require access to newlibs headers in gcc.sh, matching other libc components.
Resolves issue with headers not found.
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
Currently, the obsolete RPC headers are only installed for eglibc,
but glibc has the same /deficiency/, so install the obsolete RPC
for both.
Signed-off-by: Jérôme BARDON <bardon.pro@gmail.com>
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
Yes, I missed the backslash which messed up the linaro stuff.
The more I look at this code, I feel it needs to be refactored a bit. So
I'll come back to this in the future and clean it up.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
It's not my day.
linaro_version is a filter. If it is not a linaro toolchain, it will
just be CT_{CC,GDB}_VERSION. If it is a linaro toolchain, CT_{CC,GDB}_VERSION
will be prefixed with 'linaro-' and will not match linaro_version, as
linaro_version will just have the part after 'linaro-'.
This *really* fixes the issue :sigh:
Thanks again to @elsonwei for being right the first time!
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
linaro_version and linaro_series are defined but not set if we are not
configured for linaro builds.
Therefore we need to default them to "" (null string).
As reported by @elsonwei
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
If custom {e}glibc is being used, no need to carry out the
extract or patching phase of scripts/build/libc/glibc-eglibc.sh-common
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
CUSTOM_LOCATION config options only presented in menuconfig if component
CUSTOM version selected.
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
CUSTOM_LOCATION config options only presented in menuconfig if component
CUSTOM version selected.
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
No longer recommended practice to use --enable-add-ons=nptl, so
for 2.20 and later (along with custom glibc), don't add the
CT_THREADS to the addons_list
https://sourceware.org/glibc/wiki/Release/2.20#Packaging_Changes
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
This change updates the download locations to default to the official
download site.
For gcc and gdb, also separate out the linaro download locations so that
if you are downloading the linaro variant, it skips trying to download
from the official gcc mirror.
This commit closes#3
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Without this fix, elf2flt will blow up complaining that it can't resolve
dlopen() and friends. One has to explicitly pass '-ldl' on the final
linking command line, because the system linker is not resolving
indirect dependent shared libraries.
I've needed to this patch for several years on Fedora systems.
Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
