GCC14 will treat implicit-function-declaration as an error by default.
See https://gcc.gnu.org/gcc-14/porting_to.html for details.
Some libc function like __trap34 are defined in assembly and break this GCC diagnostic.
Signed-off-by: Nik Konyuchenko <spaun2002mobile@gmail.com>
After 557b9d4, libc_start_files and libc_main steps are performed one
after another. It doesn't make sense, especially since some of the libcs
(glibc, uClibc-ng) go to great lengths to first install start files in
the first step, libc_start_files, only to remove them immediately in the
second step, libc_main.
Current build steps also break in the xtensa newlib configurations, as
it needs to install the custom xtensa headers before building the libgcc
and after 557b9d4, the headers are not installed before libgcc is built
in pass-1.
Therefore, finish what 557b9d4 mentioned but did not do: move header
installation into a new step, libc_headers, and combine libc_start_files
and libc_main into a single step.
This also allows to combine the core pass-1/pass-2 steps, to be done in
a subsequent commit.
Signed-off-by: Alexey Neyman <stilor@att.net>
This commit adds support for the newlib configuration option
'--enable-newlib-retargetable-locking'.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This required some rework of the libc selection, as moxiebox is a layer on
top of another libc - newlib.
Also, moxiebox'es host VM (`sandbox`) needs a libcrypto on the host. We will
not have it if we're cross-compiling a canadian cross. Fortunately, all moxiebox
needs from libcrypto is SHA256, and it already includes a standalone implementation
of SHA256 in its runtime. Provide a little wrapper that allows moxiebox use
that implementation for the host binary, too.
Also, automate collecting/printing the list of all packages in a given category
(e.g. LIBC or COMP_TOOLS), generate a list of all Kconfig symbols for a given
category.
Signed-off-by: Alexey Neyman <stilor@att.net>
And never had, at least since newlib 1.17 (first version added to
crosstool-ng). Apparently, copy-pasted from glibc.sh.
Signed-off-by: Alexey Neyman <stilor@att.net>
The referenced commit replaced 'make' with '${make}' everywhere. This is
wrong for at least the utilities that we may build as companion tools
(make, libtool): this will always invoke the version detected by configure
by supplying the absolute path. In other words, the wrappers in
.build/tools/bin are not fallbacks - they are either temporary (in case
a respective companion tool is built) or permanent redirectors.
This is the reason why the PATH= has .build/*/buildtools/bin at higher
precedence than .build/tools/bin; the latter has the versions detected by
configure and the former has the versions built as companion tools.
Revert the rest of the gang (grep/sed/...) for consistency. After all,
we may decide to supply some of them as well (awk, for instance).
Signed-off-by: Alexey Neyman <stilor@att.net>
This step was only used in uClibc. However, with upcoming multilib, the
config management will have to be done for each variant differently,
anyway.
uClibc was the only user of libc_check_config step, as well as
CT_CONFIG_DIR directory. Retire these.
Two other clean-ups in uClibc.sh:
- KERNEL_HEADERS check seems to be bogus, this config option is not
present even in 0.9.30 - which is not supported already.
- SHARED_LIB_LOADER_PREFIX was renamed to MULTILIB_DIR in 0.9.31,
according to ChangeLog - and MULTILIB_DIR is passed from command line
instead.
Signed-off-by: Alexey Neyman <stilor@att.net>
This commit updates the build scripts to match the new usage of
CT_GetCustom from the previous change.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
We check for apps:
* make
* sed
* grep
* awk
* libtool/libtoolize
* install
* patch
* and more
...during configure. Our scripts should be consistent about using the
variables that define where the found tool was found.
Of course, we do hard-link these tools in buildtools, but that should be
a backup for the components we are building. Our scripts should always
use the tools we find.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
The Xtensa processor architecture is a configurable, extensible,
and synthesizable 32-bit RISC processor core. Processor and SOC vendors
can select from various processor options and even create customized
instructions in addition to a base ISA to tailor the processor for
a particular application.
Because of the configurability, the build process requires one additional
step for gcc, binutils, and gdb to update the default configuration.
These configurations are packed into an 'overlay' tar image, and are
simply untarred on top of the default configuration during the build.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
This change, as per #222, reduces the number of supported releases of
gcc to the latest branch releases.
I noticed while doing this work that gcc-4.5.4 was never added, so I
moved patches for gcc-4.5.3 to 4.5.4 and updated the
bfin-unknown-linux-uclibc example. Also, 120-siginfo.patch was fixed
upstream in the 4.5.4 release, so this patch is omitted.
I also bumped the avr sample to 4.9.3 from 4.9.2.
With the addition of gcc-5.x, the gcc release team now releases the
major.minor.0 versions, while updates to the branch are available in
svn/git. We'll address that when we get to issue #219. This change just
removes CC_GCC_5_1 and moves CC_GCC_5_2 to CC_GCC_5, and removes
CC_GCC_5_1_or_later and moves CC_GCC_5_2_or_later to CC_GCC_5_or_later.
This is the first of two part changes, as mentioned in #222.
This change is slated for release in 1.22.0. The next change will be
slated for 1.23.0, and will limit gcc versions to what is on
https://gcc.gnu.org under "Release Series and Status", which is
currently 4.9.3 and 5.2.0, although I will also support the previous
supported version. In this example that would be 4.8.5.
Last, but not least, this change also retires AVR32 support.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This commit adds support for the avr-libc C library.
According to the project page at http://www.nongnu.org/avr-libc , the
avr-libc package provides a subset of the standard C library for Atmel
AVR 8-bit RISC microcontrollers. In addition, the library provides the
basic startup code needed by most applications.
Support for this library in crosstool-ng is only enabled for the AVR
8-bit target.
The avr-libc manual and most distributions build the AVR 8-bit gcc
toolchain with the "avr" (non-canonical) target.
Some experimentation also led to the conclusion that other (canonical)
targets are not very well supported, so we force the "avr" target for
crosstool-ng as well.
The manual also recommends building avr-libc after the final gcc build.
To accomplish this with crosstool-ng, a new do_libc_post_cc step is
added, in which currently only avr-libc performs its build, and is a
no-op for the other libc options.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Prirotize http downloads before ftp downloads.
By having http download first, those using proxy will work with the
current download mechnism.
This tells me that that mechnism needs to be updated.
(proxy support and/or kconfig toggles)
closes#3
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Require access to newlibs headers in gcc.sh, matching other libc components.
Resolves issue with headers not found.
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
newlib: fix extract process for custom version
If the user specifies the use of a custom newlib version, the logic in the
extract function was reversed, so this step would fail.
Signed-off-by: Trevor Woerner <trevor.woerner@linaro.org>
[yann.morin.1998@free.fr: keep leading indentation]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <c727adf1b7bd2c1e891d.1393353347@openSUSE-i7>
Patchwork-Id: 324060
Some of the avr32headers related variables are used in different
functions, so have to be declared globally, not locally.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Add well-known HTTP mirror as a fallback. This lets crosstool-ng
work when behind a HTTP/HTTPS only proxy.
Signed-off-by: Michael Hope <michaelh@juju.net.nz>
[yann.morin.1998@free.fr: split patch in two]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <aeb4a850d0786ee62dc2.1375559989@wanda>
Patchwork-Id: 264436
This patch fixes the download of the avr32 headers in crosstool-ng by
fetching them directly from Atmel's web site instead of the now-broken URL
given by the original author of the avr32-header-fetching modification,
who fetched them from a copy on his own, now-defunct server.
It also adds the necessary logic to extract from a zip file, as that is
how the headers are packaged.
To configure it for avr32 after launching ct-ng menuconfig in an empty
directory:
Paths and misc options ->
Shell to use as CONFIG_SHELL = sh
Target options ->
Target Architecture = avr32
Toolchain options ->
Tuple's alias = avr32
Binary utilities ->
binutils version = 2.18a
C compiler
gcc version = 4.2.2
C-library
newlib version = 1.17.0
Enable IOs on long long = yes
Enable IOs on floats and doubles = yes
Disable the syscalls supplied with newlib = yes
CONFIG_SHELL is necessary to get round the "fragment: command not
found" bug when binutils-2.18 is configured using bash.
Prepared against crosstool-ng mercurial trunk on 31 March 2012.
Signed-off-by: Martin Guy <martinwguy@gmail.com>
[yann.morin.1998@free.fr: update bundles sample accordingly]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <CAL4-wQrg_NQ7jm-NCADqeyQr9twyhtx42OUGNThP6gWeqZc=kw@mail.gmail.com>
Patchwork-Id: 232612
The menu system provides an option to allow a user to request newlib
version 2.0.0. newlib-2.0.0, however, is not available at the download
location currently being used. It is, however, available (as are other
supported versions of newlib) at an alternate location.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Message-Id: <75ab5151c7f5dc9086e3.1362334313@suse64>
Patchwork-Id: 224561
We now have the ability to use a custom local directory/tarball, so
it no longer makes sense to have the ability to use the CVS repository.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Currently, newlib is built in the start_file step, which is wrong, but was
needed when the baremetal integration was... well, 'unfinished'.
Now that we build the baremetal compiler from the final cc step, and a
proper core gcc in pass-1 and pass-2, we can move the newlib build to the
step do_libc, where it belongs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Zhenqiang Chen <zhenqiang.chen@linaro.org>
[yann.morin.1998@anciens.enib.fr: copy with a single call to 'cp']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
With hard-coded "-O", users can not customize CFLAGS_FOR_TARGET
by CT_TARGET_CFLAGS. If "-O" is needed, users can input it in
CT_TARGET_CFLAGS. By default, "-Os" is enabled.
Signed-off-by: Zhenqiang Chen <zhenqiang.chen@linaro.org>
