We only build the static ncurses, to be used to build the native gdb,
and it needs not be available for anyone but us. So install it into
a temporary place, and get rid of it once gdb is built.
Initial version of adding autoconf as a companion tool.
Signed-off-by: Richard Strand <richard.strand@icomera.com>
[yann.morin.1998@anciens.enib.fr: use generic overide tools dir]
[yann.morin.1998@anciens.enib.fr: update menu entries]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Change the overide bin dir so it can be used by companion tools
Signed-off-by: Richard Strand <richard.strand@icomera.com>
[yann.morin.1998@anciens.enib.fr: more generic overide tools dir]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
By default curl doesn't folow redirects. This breaks sourceforge downloads.
Add the -L option to curl to fix this.
Curl also downloads the html as a file even when it gets a 404. This breaks
http downloads when using the failback system. Add the -f option to curl to fix
this.
Signed-off-by: Richard Strand <richard.strand@icomera.com>
If the selected ARCH is dual-bitness (eg. supports 32- and 64-bit),
then we need to know the correct place where to fetch some headers.
Currently, this applies only to x86 variants: i386 and x86_64.
Even if the selected ARCH does not support different bitness (or we do
not support building with another bitness), still select the appropriate
bitness.
Remove references to the seemingly native toolchains do not build
issue as it seems to be fixed.
Signed-off-by: Richard Strand <richard.strand@icomera.com>
This patch adds support for the latest Linux 2.6.32.3 kernel.
Signed-off-by: Joachim Nilsson <jocke@vmlinux.org>
[yann.morin.1998@anciens.enib.fr: keep only one long-term stable]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Pack netinet structs to be possible to use for creating
IP frames on big-endian targets.
Signed-off-by: Joachim Nilsson <jocke@vmlinux.org>
[yann.morin.1998@anciens.enib.fr: removed getline patch, already in]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
This is a set of patches for binutils-2.20 that have been "ported", or rather
shamelessly stolen, from the OpenEmbedded project:
http://cgit.openembedded.org/cgit.cgi/openembedded/tree/recipes/binutils/binutils-2.20
Tried and tested on Arm (big-endian Xscale, and little-endian i.MX27) with GCC 4.4.2
Signed-off-by: Joachim Nilsson <jocke@vmlinux.org>
Note: the MPFR site happens to be down at the time I wrote
this message, and happens to be down quite often.
Once it's back up'n'runnin', I'll mirror as much as possible
the MPFR tarballs on my site, but in the meantime, you'll
have to handle it by yourself (patience...).
On x86, gcc-4.4.x breaks when building for target armeb.
It is still required to configure with: --disable-shared
Note: if building on an x86_64, there is no need to pass --disable-shared
Trying to download every extension in turn does not work.
The Debian server returns a friendly 404-page that is
saved as the orig.tar.bz2 file. Help the helper by giving
it the extension to retrieve.
From this version of ltrace the maintainer has removed support for
GNU Autotools, so the patch sets needed to be reworked.
Included is the latest Debian patch, by the Debian ltrace maintainer
Juan Cespedes <cespedes@debian.org>, the OpenEmbedded patches for cross
compiling, by Khem Raj <raj.khem@gmail.com> and a further set of patches
by Joachim Nilsson <jocke@vmlinux.org> for crosstool-NG.
Dragan Marinkovic <marinkovic.dragan@gmail.com> wrote:
I finally had the time (and board) to spend some time with
crosstool-NG version 1.5.2 and TMS320DM6446 (DaVinci Digital Media
System-on-Chip,
http://focus.ti.com/docs/prod/folders/print/tms320dm6446.html).
I was able to successfully build and run v2.6.27-davinci1 kernel
(Kevin Hilman's branch) with busybox based initramfs on it. I don't
believe that any later kernel would represent any challenge (it just
happens that I'm currently working with this version). What a thrill
:).
crosstool-NG/toolchain config is attached. It may be useful to someone
using crosstool-NG ...
Using this: tar cf - -C "/some/place" |tar xf - -C "/some/other/place"
to copy a directory to another place does not properly fail (when it does).
Using this instead: cp -av "/some/place" "/some/other/place"
makes it easy to see why and how it failed.
Impacted:
libc/uClibc
debug/ltrace
tools/sstrip
scripts/populate
