crosstool-ng/config/binutils/binutils.in

# binutils options

comment "GNU binutils"

config BINUTILS_CUSTOM
    bool
    prompt "Custom binutils"
    depends on EXPERIMENTAL
    select BINUTILS_2_26_or_later
    help
      The choosen binutils version shall be not downloaded. Instead use
      a custom location to get the source.

if BINUTILS_CUSTOM

config BINUTILS_CUSTOM_LOCATION
    string
    prompt "Full path to custom binutils source"
    help
      Enter the path to the directory or tarball of your source for binutils.

      If the path is a tarball, it should extract to: <name>-<version>/
      where the name is this component, binutils, and the version is set
      below in the custom version string.

config BINUTILS_CUSTOM_VERSION
    string
    prompt "Binutils Custom Version number"
    help
      Enter the version number for your custom binutils.

config BINUTILS_VERSION
    string
    default BINUTILS_CUSTOM_VERSION

endif # BINUTILS_CUSTOM

if ! BINUTILS_CUSTOM

config BINUTILS_SHOW_LINARO
    bool
    prompt "Show Linaro versions"
    help
      Linaro is maintaining some advanced/more stable/experimental versions
      of binutils, especially for the ARM architecture.

      Those versions have not been blessed by the binutils comunity (nor have they
      been cursed either!), but they look to be pretty much stable, and even
      more stable than the upstream versions. YMMV...

      If you do not know what this Linaro stuff is, then simply say 'n' here,
      and rest in peace. OTOH, if you know what you are doing, you will be
      able to use and enjoy :-) the Linaro versions by saying 'y' here.

      Linaro: http://www.linaro.org/

choice
    bool
    prompt "binutils version"
# Don't remove next line
# CT_INSERT_VERSION_BELOW

config BINUTILS_V_2_27
    bool
    prompt "2.27"
    select BINUTILS_2_27_or_later

config BINUTILS_V_2_26
    bool
    prompt "2.26"
    select BINUTILS_2_26_or_later

config BINUTILS_V_2_25_1
    bool
    prompt "2.25.1 (OBSOLETE)"
    select BINUTILS_2_25_1_or_later
    depends on OBSOLETE

config BINUTILS_LINARO_V_2_25
    bool
    prompt "linaro-2.25.0-2015.01-2 (OBSOLETE)"
    select BINUTILS_2_25_or_later
    depends on BINUTILS_SHOW_LINARO
    depends on OBSOLETE

config BINUTILS_LINARO_V_2_24
    bool
    prompt "linaro-2.24.0-2014.11-2 (OBSOLETE)"
    select BINUTILS_2_24_or_later
    depends on BINUTILS_SHOW_LINARO
    depends on OBSOLETE

config BINUTILS_V_2_24
    bool
    prompt "2.24 (OBSOLETE)"
    select BINUTILS_2_24_or_later
    depends on OBSOLETE

config BINUTILS_LINARO_V_2_23_2
    bool
    prompt "linaro-2.23.2-2013.10-4 (OBSOLETE)"
    select BINUTILS_2_23_2_or_later
    depends on BINUTILS_SHOW_LINARO
    depends on OBSOLETE

config BINUTILS_V_2_23_2
    bool
    prompt "2.23.2 (OBSOLETE)"
    select BINUTILS_2_23_2_or_later
    depends on OBSOLETE

endchoice

config BINUTILS_VERSION
    string
# Don't remove next line
# CT_INSERT_VERSION_STRING_BELOW
    default "2.27" if BINUTILS_V_2_27
    default "2.26" if BINUTILS_V_2_26
    default "2.25.1" if BINUTILS_V_2_25_1
    default "linaro-2.25.0-2015.01-2" if BINUTILS_LINARO_V_2_25
    default "linaro-2.24.0-2014.11-2" if BINUTILS_LINARO_V_2_24
    default "2.24" if BINUTILS_V_2_24
    default "linaro-2.23.2-2013.10-4" if BINUTILS_LINARO_V_2_23_2
    default "2.23.2" if BINUTILS_V_2_23_2

endif # ! BINUTILS_CUSTOM

config BINUTILS_2_27_or_later
    bool
    select BINUTILS_2_26_or_later

config BINUTILS_2_26_or_later
    bool
    select BINUTILS_2_25_1_or_later

config BINUTILS_2_25_1_or_later
    bool
    select BINUTILS_2_25_or_later

config BINUTILS_2_25_or_later
    bool
    select BINUTILS_2_24_or_later

config BINUTILS_2_24_or_later
    bool
    select BINUTILS_2_23_2_or_later

config BINUTILS_2_23_2_or_later
    bool
    select BINUTILS_HAS_GOLD
    select BINUTILS_HAS_HASH_STYLE
    select BINUTILS_HAS_PKGVERSION_BUGURL
    select BINUTILS_HAS_PLUGINS

config BINUTILS_HAS_HASH_STYLE
    bool

config BINUTILS_HAS_GOLD
    bool

# gold only suports the listed architectures
config BINUTILS_GOLD_SUPPORTS_ARCH
    bool
    default y if ARCH_arm
    default y if ARCH_x86

config BINUTILS_GOLD_SUPPORT
    bool
    default y
    depends on BINUTILS_HAS_GOLD
    depends on BINUTILS_GOLD_SUPPORTS_ARCH
    depends on ! STATIC_TOOLCHAIN

config BINUTILS_HAS_PLUGINS
    bool

config BINUTILS_HAS_PKGVERSION_BUGURL
    bool

# Force using the BFD linker if needed
# This is the case for some C libraries (eg. glibc at least) and affected
# components can select this
config BINUTILS_FORCE_LD_BFD
    bool

choice
    bool
    prompt "Linkers to enable"

config BINUTILS_LINKER_LD
    bool
    prompt "ld"
    help
      The historical, bfd linker.

config BINUTILS_LINKER_GOLD
    bool
    prompt "gold"
    depends on BINUTILS_GOLD_SUPPORT
    depends on ! BINUTILS_FORCE_LD_BFD
    select BINUTILS_GOLD_INSTALLED
    help
      gold is a new, optimised, multi-threaded linker with support
      for plugins. Designed to be a drop-in replacement for the
      original linker, ld, it can be much faster, with a 5:1 or
      bigger ratio being not uncommon, YMMV.

config BINUTILS_LINKER_LD_GOLD
    bool
    prompt "ld, gold"
    depends on BINUTILS_GOLD_SUPPORT
    select BINUTILS_GOLD_INSTALLED
    select BINUTILS_LINKER_BOTH
    help
      Both the historical ld and the new gold linkers will be
      installed, with ld being the default linker used.

      See help for gold, above.

config BINUTILS_LINKER_GOLD_LD
    bool
    prompt "gold, ld"
    depends on BINUTILS_GOLD_SUPPORT
    select BINUTILS_GOLD_INSTALLED
    select BINUTILS_LINKER_BOTH
    select BINUTILS_LD_WRAPPER if BINUTILS_FORCE_LD_BFD
    help
      Both the historical ld and the new gold linkers will be
      installed, with gold being the default linker used.

      See help for gold, above.

endchoice # Enable linkers

if BINUTILS_LINKER_GOLD
comment "WARNING! gold is not capable of"
comment "|         building glibc!"
endif # BINUTILS_LINKER_GOLD

config BINUTILS_GOLD_INSTALLED
    bool

config BINUTILS_GOLD_THREADS
    bool
    prompt "|  Enable threaded gold"
    depends on BINUTILS_GOLD_INSTALLED
    help
      When configured with threads, gold can link in parallel,
      possibly cooperating with a make jobserver.

config BINUTILS_LINKER_BOTH
    bool

config BINUTILS_LINKERS_LIST
    string
    default "ld"        if BINUTILS_LINKER_LD
    default "gold"      if BINUTILS_LINKER_GOLD
    default "ld,gold"   if BINUTILS_LINKER_LD_GOLD
    default "gold,ld"   if BINUTILS_LINKER_GOLD_LD

config BINUTILS_LD_WRAPPER
    bool
    prompt "|  Add ld wrapper"
    depends on BINUTILS_LINKER_BOTH
    help
      Add an ld wrapper that calls to either gold or ld.

      By default, the wrapper will call to the default wrapper,
      but if you set the environment variable CTNG_LD_IS, you
      can change which linker will get called:
        CTNG_LD_IS=gold     will unconditionally call the gold linker
        CTNG_LD_IS=bfd      will unconditionally call the old bfd ld linker

config BINUTILS_LINKER_DEFAULT
    string
    default "bfd"   if BINUTILS_LINKER_LD || BINUTILS_LINKER_LD_GOLD
    default "gold"  if BINUTILS_LINKER_GOLD || BINUTILS_LINKER_GOLD_LD

config BINUTILS_PLUGINS
    bool
    prompt "Enable support for plugins"
    depends on BINUTILS_HAS_PLUGINS
    depends on ! STATIC_TOOLCHAIN
    help
      binutils can be extended through the use of plugins.
      Especially, gold can use the lto-plugin, as installed
      by gcc, to handle LTO.

config BINUTILS_EXTRA_CONFIG_ARRAY
    string
    prompt "binutils extra config"
    default ""
    help
      Extra flags passed onto ./configure when configuring

      You can enter multiple arguments here, and arguments can contain spaces
      if they are properly quoted (or escaped, but prefer quotes). Eg.:
          --with-foo="1st arg with 4 spaces" --with-bar=2nd-arg-without-space

config BINUTILS_FOR_TARGET
    bool
    prompt "binutils libraries for the target"
    depends on ! BARE_METAL
    depends on ! BACKEND
    help
      Some utilities may need binutils libraries to be available on
      the target, eg. oprofile.

if BINUTILS_FOR_TARGET

config BINUTILS_FOR_TARGET_IBERTY
    bool
    prompt "libiberty"
    default y

config BINUTILS_FOR_TARGET_BFD
    bool
    prompt "libbfd"
    default y

endif # BINUTILS_FOR_TARGET