22 KiB
API: Testing
Flow testing
MockNetwork
Flow testing can be fully automated using a MockNetwork composed of StartedMockNode nodes. Each StartedMockNode behaves like a regular Corda node, but its services are either in-memory or mocked out.
A MockNetwork is created as follows:
class FlowTests {
private lateinit var mockNet: MockNetwork
@Before
fun setup() {
network = MockNetwork(listOf("my.cordapp.package", "my.other.cordapp.package"))
}
}public class IOUFlowTests {
private MockNetwork network;
@Before
public void setup() {
network = new MockNetwork(ImmutableList.of("my.cordapp.package", "my.other.cordapp.package"));
}
}The MockNetwork requires at a minimum a list of packages. Each package is packaged into a CorDapp JAR and installed as a CorDapp on each StartedMockNode.
Configuring the MockNetwork
The MockNetwork is configured automatically. You can tweak its configuration using a MockNetworkParameters object, or by using named parameters in Kotlin:
val network = MockNetwork(
// A list of packages to scan. Any contracts, flows and Corda services within these
// packages will be automatically available to any nodes within the mock network
cordappPackages = listOf("my.cordapp.package", "my.other.cordapp.package"),
// If true then each node will be run in its own thread. This can result in race conditions in your
// code if not carefully written, but is more realistic and may help if you have flows in your app that
// do long blocking operations.
threadPerNode = false,
// The notaries to use on the mock network. By default you get one mock notary and that is usually
// sufficient.
notarySpecs = listOf(MockNetworkNotarySpec(DUMMY_NOTARY_NAME)),
// If true then messages will not be routed from sender to receiver until you use the
// [MockNetwork.runNetwork] method. This is useful for writing single-threaded unit test code that can
// examine the state of the mock network before and after a message is sent, without races and without
// the receiving node immediately sending a response.
networkSendManuallyPumped = false,
// How traffic is allocated in the case where multiple nodes share a single identity, which happens for
// notaries in a cluster. You don't normally ever need to change this: it is mostly useful for testing
// notary implementations.
servicePeerAllocationStrategy = InMemoryMessagingNetwork.ServicePeerAllocationStrategy.Random())
val network2 = MockNetwork(
// A list of packages to scan. Any contracts, flows and Corda services within these
// packages will be automatically available to any nodes within the mock network
listOf("my.cordapp.package", "my.other.cordapp.package"), MockNetworkParameters(
// If true then each node will be run in its own thread. This can result in race conditions in your
// code if not carefully written, but is more realistic and may help if you have flows in your app that
// do long blocking operations.
threadPerNode = false,
// The notaries to use on the mock network. By default you get one mock notary and that is usually
// sufficient.
notarySpecs = listOf(MockNetworkNotarySpec(DUMMY_NOTARY_NAME)),
// If true then messages will not be routed from sender to receiver until you use the
// [MockNetwork.runNetwork] method. This is useful for writing single-threaded unit test code that can
// examine the state of the mock network before and after a message is sent, without races and without
// the receiving node immediately sending a response.
networkSendManuallyPumped = false,
// How traffic is allocated in the case where multiple nodes share a single identity, which happens for
// notaries in a cluster. You don't normally ever need to change this: it is mostly useful for testing
// notary implementations.
servicePeerAllocationStrategy = InMemoryMessagingNetwork.ServicePeerAllocationStrategy.Random())
)MockNetwork network = MockNetwork(
// A list of packages to scan. Any contracts, flows and Corda services within these
// packages will be automatically available to any nodes within the mock network
ImmutableList.of("my.cordapp.package", "my.other.cordapp.package"),
new MockNetworkParameters()
// If true then each node will be run in its own thread. This can result in race conditions in
// your code if not carefully written, but is more realistic and may help if you have flows in
// your app that do long blocking operations.
.setThreadPerNode(false)
// The notaries to use on the mock network. By default you get one mock notary and that is
// usually sufficient.
.setNotarySpecs(ImmutableList.of(new MockNetworkNotarySpec(DUMMY_NOTARY_NAME)))
// If true then messages will not be routed from sender to receiver until you use the
// [MockNetwork.runNetwork] method. This is useful for writing single-threaded unit test code
// that can examine the state of the mock network before and after a message is sent, without
// races and without the receiving node immediately sending a response.
.setNetworkSendManuallyPumped(false)
// How traffic is allocated in the case where multiple nodes share a single identity, which
// happens for notaries in a cluster. You don't normally ever need to change this: it is mostly
// useful for testing notary implementations.
.setServicePeerAllocationStrategy(new InMemoryMessagingNetwork.ServicePeerAllocationStrategy.Random()));Adding nodes to the network
Nodes are created on the MockNetwork using:
class FlowTests {
private lateinit var mockNet: MockNetwork
lateinit var nodeA: StartedMockNode
lateinit var nodeB: StartedMockNode
@Before
fun setup() {
network = MockNetwork(listOf("my.cordapp.package", "my.other.cordapp.package"))
nodeA = network.createPartyNode()
// We can optionally give the node a name.
nodeB = network.createPartyNode(CordaX500Name("Bank B", "London", "GB"))
}
}public class IOUFlowTests {
private MockNetwork network;
private StartedMockNode a;
private StartedMockNode b;
@Before
public void setup() {
network = new MockNetwork(ImmutableList.of("my.cordapp.package", "my.other.cordapp.package"));
nodeA = network.createPartyNode(null);
// We can optionally give the node a name.
nodeB = network.createPartyNode(new CordaX500Name("Bank B", "London", "GB"));
}
}Nodes added using createPartyNode are provided a default set of node parameters. However, it is also possible to provide different parameters to each node using the following methods on MockNetwork:
/**
* Create a started node with the given parameters.
*
* @param legalName The node's legal name.
* @param forcedID A unique identifier for the node.
* @param entropyRoot The initial entropy value to use when generating keys. Defaults to an (insecure) random value,
* but can be overridden to cause nodes to have stable or colliding identity/service keys.
* @param configOverrides Add/override behaviour of the [NodeConfiguration] mock object.
* @param extraCordappPackages Extra CorDapp packages to add for this node.
*/
@JvmOverloads
fun createNode(legalName: CordaX500Name? = null,
forcedID: Int? = null,
entropyRoot: BigInteger = BigInteger.valueOf(random63BitValue()),
configOverrides: (NodeConfiguration) -> Any? = {},
extraCordappPackages: List<String> = emptyList()
): StartedMockNode
/** Create a started node with the given parameters. **/
fun createNode(parameters: MockNodeParameters = MockNodeParameters()): StartedMockNodeAs you can see above, parameters can be added individually or encapsulated within a MockNodeParameters object. Of particular interest are configOverrides which allow you to override any default config option specified within the NodeConfiguration object. Also, the extraCordappPackages parameter allows you to add extra CorDapps to a specific node. This is useful when you wish for all nodes to load a common CorDapp but for a subset of nodes to load CorDapps specific to their role in the network.
Running the network
Regular Corda nodes automatically process received messages. When using a MockNetwork with networkSendManuallyPumped set to false, you must manually initiate the processing of received messages.
You manually process received messages as follows:
StartedMockNode.pumpReceiveto process a single message from the node's queueMockNetwork.runNetworkto process all the messages in every node's queue. This may generate additional messages that must in turn be processednetwork.runNetwork(-1)(the default in Kotlin) will exchange messages until there are no further messages to process
Running flows
A StartedMockNode starts a flow using the StartedNodeServices.startFlow method. This method returns a future representing the output of running the flow.
val signedTransactionFuture = nodeA.services.startFlow(IOUFlow(iouValue = 99, otherParty = nodeBParty))CordaFuture<SignedTransaction> future = startFlow(a.getServices(), new ExampleFlow.Initiator(1, nodeBParty));The network must then be manually run before retrieving the future's value:
val signedTransactionFuture = nodeA.services.startFlow(IOUFlow(iouValue = 99, otherParty = nodeBParty))
// Assuming network.networkSendManuallyPumped == false.
network.runNetwork()
val signedTransaction = future.get();CordaFuture<SignedTransaction> future = startFlow(a.getServices(), new ExampleFlow.Initiator(1, nodeBParty));
// Assuming network.networkSendManuallyPumped == false.
network.runNetwork();
SignedTransaction signedTransaction = future.get();Accessing StartedMockNode internals
Querying a node's vault
Recorded states can be retrieved from the vault of a StartedMockNode using:
val myStates = nodeA.services.vaultService.queryBy<MyStateType>().statesList<MyStateType> myStates = node.getServices().getVaultService().queryBy(MyStateType.class).getStates();This allows you to check whether a given state has (or has not) been stored, and whether it has the correct attributes.
Examining a node's transaction storage
Recorded transactions can be retrieved from the transaction storage of a StartedMockNode using:
val transaction = nodeA.services.validatedTransactions.getTransaction(transaction.id)SignedTransaction transaction = nodeA.getServices().getValidatedTransactions().getTransaction(transaction.getId())This allows you to check whether a given transaction has (or has not) been stored, and whether it has the correct attributes.
This allows you to check whether a given state has (or has not) been stored, and whether it has the correct attributes.
Further examples
- See the flow testing tutorial
here <flow-testing> - See the oracle tutorial
here <oracles>for information on testing@CordaServiceclasses - Further examples are available in the Example CorDapp in Java and Kotlin
Contract testing
The Corda test framework includes the ability to create a test ledger by calling the ledger function on an implementation of the ServiceHub interface.
Test identities
You can create dummy identities to use in test transactions using the TestIdentity class:
../../docs/source/example-code/src/test/kotlin/net/corda/docs/tutorial/testdsl/TutorialTestDSL.kt
../../docs/source/example-code/src/test/java/net/corda/docs/java/tutorial/testdsl/CommercialPaperTest.java
TestIdentity exposes the following fields and methods:
val identityParty: Party = bigCorp.party
val identityName: CordaX500Name = bigCorp.name
val identityPubKey: PublicKey = bigCorp.publicKey
val identityKeyPair: KeyPair = bigCorp.keyPair
val identityPartyAndCertificate: PartyAndCertificate = bigCorp.identityParty identityParty = bigCorp.getParty();
CordaX500Name identityName = bigCorp.getName();
PublicKey identityPubKey = bigCorp.getPublicKey();
KeyPair identityKeyPair = bigCorp.getKeyPair();
PartyAndCertificate identityPartyAndCertificate = bigCorp.getIdentity();You can also create a unique TestIdentity using the fresh method:
val uniqueTestIdentity: TestIdentity = TestIdentity.fresh("orgName")TestIdentity uniqueTestIdentity = TestIdentity.Companion.fresh("orgName");MockServices
A mock implementation of ServiceHub is provided in MockServices. This is a minimal ServiceHub that suffices to test contract logic. It has the ability to insert states into the vault, query the vault, and construct and check transactions.
../../docs/source/example-code/src/test/kotlin/net/corda/docs/tutorial/testdsl/TutorialTestDSL.kt
../../docs/source/example-code/src/test/java/net/corda/docs/java/tutorial/testdsl/CommercialPaperTest.java
Alternatively, there is a helper constructor which just accepts a list of TestIdentity. The first identity provided is the identity of the node whose ServiceHub is being mocked, and any subsequent identities are identities that the node knows about. Only the calling package is scanned for cordapps and a test IdentityService is created for you, using all the given identities.
../../docs/source/example-code/src/test/kotlin/net/corda/docs/tutorial/testdsl/TutorialTestDSL.kt
../../docs/source/example-code/src/test/java/net/corda/docs/java/tutorial/testdsl/CommercialPaperTest.java
Writing tests using a test ledger
The ServiceHub.ledger extension function allows you to create a test ledger. Within the ledger wrapper you can create transactions using the transaction function. Within a transaction you can define the input and output states for the transaction, alongside any commands that are being executed, the timeWindow in which the transaction has been executed, and any attachments, as shown in this example test:
../../docs/source/example-code/src/test/kotlin/net/corda/docs/tutorial/testdsl/TutorialTestDSL.kt
../../docs/source/example-code/src/test/java/net/corda/docs/java/tutorial/testdsl/CommercialPaperTest.java
Once all the transaction components have been specified, you can run verifies() to check that the given transaction is valid.
Checking for failure states
In order to test for failures, you can use the failsWith method, or in Kotlin the fails with helper method, which assert that the transaction fails with a specific error. If you just want to assert that the transaction has failed without verifying the message, there is also a fails method.
../../docs/source/example-code/src/test/kotlin/net/corda/docs/tutorial/testdsl/TutorialTestDSL.kt
../../docs/source/example-code/src/test/java/net/corda/docs/java/tutorial/testdsl/CommercialPaperTest.java
Note
The transaction DSL forces the last line of the test to be either a verifies or fails with statement.
Testing multiple scenarios at once
Within a single transaction block, you can assert several times that the transaction constructed so far either passes or fails verification. For example, you could test that a contract fails to verify because it has no output states, and then add the relevant output state and check that the contract verifies successfully, as in the following example:
../../docs/source/example-code/src/test/kotlin/net/corda/docs/tutorial/testdsl/TutorialTestDSL.kt
../../docs/source/example-code/src/test/java/net/corda/docs/java/tutorial/testdsl/CommercialPaperTest.java
You can also use the tweak function to create a locally scoped transaction that you can make changes to and then return to the original, unmodified transaction. As in the following example:
../../docs/source/example-code/src/test/kotlin/net/corda/docs/tutorial/testdsl/TutorialTestDSL.kt
../../docs/source/example-code/src/test/java/net/corda/docs/java/tutorial/testdsl/CommercialPaperTest.java
Chaining transactions
The following example shows that within a ledger, you can create more than one transaction in order to test chains of transactions. In addition to transaction, unverifiedTransaction can be used, as in the example below, to create transactions on the ledger without verifying them, for pre-populating the ledger with existing data. When chaining transactions, it is important to note that even though a transaction verifies successfully, the overall ledger may not be valid. This can be verified separately by placing a verifies or fails statement within the ledger block.
../../docs/source/example-code/src/test/kotlin/net/corda/docs/tutorial/testdsl/TutorialTestDSL.kt
../../docs/source/example-code/src/test/java/net/corda/docs/java/tutorial/testdsl/CommercialPaperTest.java