Introducing a new flow start method (`startFlowDynamicWithClientId`) passing in a `clientId`.
Once `startFlowDynamicWithClientId` gets called, the `clientId` gets injected into `InvocationContext` and also pushed to the logging context.
If a new flow starts with this method, then a < `clientId` to flow > pair is kept on node side, even after the flow's lifetime. If `startFlowDynamicWithClientId` is called again with the same `clientId` then the node identifies that this `clientId` refers to an existing < `clientId` to flow > pair and returns back to the rpc client a `FlowStateMachineHandle` future, created out of that pair.
`FlowStateMachineHandle` interface was introduced as a thinner `FlowStateMachine`. All `FlowStateMachine` properties used by call sites are moved into this new interface along with `clientId` and then `FlowStateMachine` extends it.
Introducing an acknowledgement method (`removeClientId`). Calling this method removes the < `clientId` to flow > pair on the node side and frees resources.
* CORDA-3769: Switched attachments class loader cache to use caffeine with original implementation used by determinstic core.
* CORDA-3769: Removed default ctor arguments.
* CORDA-3769: Switched mapping function to Function type to avoid synthetic method being generated.
* CORDA-3769: Now using a cache created from NamedCacheFactory for the attachments class loader cache.
* CORDA-3769: Making detekt happy.
* CORDA-3769: The finality tests now check for UntrustedAttachmentsException which will actually happen in reality.
* CORDA-3769: Refactored after review comments.
* CORDA-3769: Removed the AttachmentsClassLoaderSimpleCacheImpl as DJVM does not need it. Also updated due to review comments.
* CORDA-3769: Removed the generic parameters from AttachmentsClassLoader.
* CORDA-3769: Removed unused imports.
* CORDA-3769: Updates from review comments.
* CORDA-3769: Updated following review comments. MigrationServicesForResolution now uses cache factory. Ctor updated for AttachmentsClassLoaderSimpleCacheImpl.
* CORDA-3769: Reduced max class loader cache size
* CORDA-3769: Fixed the attachments class loader cache size to a fixed default
* CORDA-3769: Switched attachments class loader size to be reduced by fixed value.
Wait for log file to indicate that a driver node process is running, instead of trying to open a socket on the port the node is attempting to binding on. This means the driver is more responsive to the node being ready, as well as removing a race condition where the binding test could block the node from starting.
As sometimes nodes do not log this information, after 20 seconds we presume the node is up.
* Add schema migration to smoke tests
* Fix driver to work correctly for out-of-proc node with persistent database.
Co-authored-by: Ross Nicoll <ross.nicoll@r3.com>
* Move log messages that are not useful in typical usage from info to debug level to reduce log spam.
* Add node startup check before attempting to connect.
Maven central will not allow the node-driver to be published without a Javadoc `.jar` file, even if it is empty. This adds an empty Javadoc `.jar` to the output.
In enterprise, `AuthDBTests` picked up a schema from a unit test and
included it in the cordapp it builds. This schema does not have a
migration and therefore fails the integration tests.
`NodeBasedTest` now lets cordapps to be defined and passed in to avoid
this issue. It defaults to making a cordapp from the tests base
directory if none are provided.
* CORDA-3722 withEntityManager can rollback its session
Improve the handling of database transactions when using
`withEntityManager` inside a flow.
Extra changes have been included to improve the safety and
correctness of Corda around handling database transactions.
This focuses on allowing flows to catch errors that occur inside an
entity manager and handle them accordingly.
Errors can be caught in two places:
- Inside `withEntityManager`
- Outside `withEntityManager`
Further changes have been included to ensure that transactions are
rolled back correctly.
Errors caught inside `withEntityManager` require the flow to manually
`flush` the current session (the entity manager's individual session).
By manually flushing the session, a `try-catch` block can be placed
around the `flush` call, allowing possible exceptions to be caught.
Once an error is thrown from a call to `flush`, it is no longer possible
to use the same entity manager to trigger any database operations. The
only possible option is to rollback the changes from that session.
The flow can continue executing updates within the same session but they
will never be committed. What happens in this situation should be handled
by the flow. Explicitly restricting the scenario requires a lot of effort
and code. Instead, we should rely on the developer to control complex
workflows.
To continue updating the database after an error like this occurs, a new
`withEntityManager` block should be used (after catching the previous
error).
Exceptions can be caught around `withEntityManager` blocks. This allows
errors to be handled in the same way as stated above, except the need to
manually `flush` the session is removed. `withEntityManager` will
automatically `flush` a session if it has not been marked for rollback
due to an earlier error.
A `try-catch` can then be placed around the whole of the
`withEntityManager` block, allowing the error to be caught while not
committing any changes to the underlying database transaction.
To make `withEntityManager` blocks work like mini database transactions,
save points have been utilised. A new savepoint is created when opening
a `withEntityManager` block (along with a new session). It is then used
as a reference point to rollback to if the session errors and needs to
roll back. The savepoint is then released (independently from
completing successfully or failing).
Using save points means, that either all the statements inside the
entity manager are executed, or none of them are.
- A new session is created every time an entity manager is requested,
but this does not replace the flow's main underlying database session.
- `CordaPersistence.transaction` can now determine whether it needs
to execute its extra error handling code. This is needed to allow errors
escape `withEntityManager` blocks while allowing some of our exception
handling around subscribers (in `NodeVaultService`) to continue to work.
* CORDA-3578 add corda prefix to conf file names as original issue was having non-corda reference.conf files on classpath causes DriverDSLImp failure
it is better to have this naming convention and avoid further conflicts of conf files.
* fixed weird duplicates
* revert renaming changes for web-reference.conf and loadtest-reference.conf
* CORDA-3755: Switched attachments map to a WeakHashMap (#6214)
* CORDA-3772: Now specify source and target of 8 when compiling contract classes.
* CORDA-3651: addManifest now uses separate files for reading and writing. (#6026)
* CORDA-3651: addManifest now uses separate files for reading and writing.
* CORDA-3651: The jar scanning loader now closes itsself.
Co-authored-by: Adel El-Beik <adelel-beik@19LDN-MAC108.local>
Co-authored-by: Adel El-Beik <adelel-beik@19LDN-MAC108.local>
Removing the ability to initialise schema from the node config, and add a new sub-command to initialise the schema (that does not do anything else and exits afterwards).
Also adding a command line flag that allow app schema to be maintained by hibernate for legacy cordapps, tests or rapid development.
Patching up mock net and driver test frameworks so they create the required schemas for tests to work, defaulting schema migration and hibernate schema management to true to match pre-existing behaviour.
Modified network bootstrapper to run an initial schema set-up so it can register nodes.
Added command-line option: `--pause-all-flows` to the Node to control this.
This mode causes all checkpoints to be set to status PAUSED when the
state machine starts up (in StartMode.Safe mode).
Changed the state machine so that PAUSED checkpoints are loaded into
memory (the checkpoint is deserialised but the flow state is left serialised)
but not started.
Messages from peers are queued whilst the flow is paused and processed
once the flow is resumed.
* Bump OS release version 4.6
* CORDA-3755: Switched attachments map to a WeakHashMap
* CORDA-3755: Added explicit strong references to map key.
* CORDA-3755: Keeping detekt happy.
* CORDA-3755: Test a gc in verify.
* CORDA-3755: Making detekt happy.
* CORDA-3755: Suppress warnings for weak reference test.
* CORDA-3755: Fixing build failure with attachments.
* CORDA-3755: Rewrite based on Ricks input - now handles attachment already existing in map!
* CORDA-3755: Refactor WeakReference behaviour into AttachmentsHolderImpl and provide alternate version of this class for core-deterministic.
* CORDA-3755: Added more tests for WeakHashMap.
* CORDA-3755: Ignore the tests using System.gc keep for local testing only
* CORDA-3755: Adding comment to explain the ignored tests.
* Make AttachmentsHolderImpl package-private inside core-deterministic, just like it is inside core.
* CORDA-3755: Update assertions following review comments.
* CORDA-3755: Removing import
* CORDA-3755: Removed unused var.
* CORDA-3755: Reverting files that somehow got changed in rebase.
Co-authored-by: nargas-ritu <ritu.gupta@r3.com>
Co-authored-by: Chris Rankin <chris.rankin@r3.com>
The new flow sleep made `NotaryWhitelistTests` flaky which highlighted
an issue with the change to how a flow sleeps. Messages were being
pumped while the flow was sleeping which lead to inconsistent behaviour.
Messages are no longer pumped while a flow sleeps.
* CORDA-3722 withEntityManager can rollback its session
## Summary
Improve the handling of database transactions when using
`withEntityManager` inside a flow.
Extra changes have been included to improve the safety and
correctness of Corda around handling database transactions.
This focuses on allowing flows to catch errors that occur inside an
entity manager and handle them accordingly.
Errors can be caught in two places:
- Inside `withEntityManager`
- Outside `withEntityManager`
Further changes have been included to ensure that transactions are
rolled back correctly.
## Catching errors inside `withEntityManager`
Errors caught inside `withEntityManager` require the flow to manually
`flush` the current session (the entity manager's individual session).
By manually flushing the session, a `try-catch` block can be placed
around the `flush` call, allowing possible exceptions to be caught.
Once an error is thrown from a call to `flush`, it is no longer possible
to use the same entity manager to trigger any database operations. The
only possible option is to rollback the changes from that session.
The flow can continue executing updates within the same session but they
will never be committed. What happens in this situation should be handled
by the flow. Explicitly restricting the scenario requires a lot of effort
and code. Instead, we should rely on the developer to control complex
workflows.
To continue updating the database after an error like this occurs, a new
`withEntityManager` block should be used (after catching the previous
error).
## Catching errors outside `withEntityManager`
Exceptions can be caught around `withEntityManager` blocks. This allows
errors to be handled in the same way as stated above, except the need to
manually `flush` the session is removed. `withEntityManager` will
automatically `flush` a session if it has not been marked for rollback
due to an earlier error.
A `try-catch` can then be placed around the whole of the
`withEntityManager` block, allowing the error to be caught while not
committing any changes to the underlying database transaction.
## Savepoints / Transactionality
To make `withEntityManager` blocks work like mini database transactions,
save points have been utilised. A new savepoint is created when opening
a `withEntityManager` block (along with a new session). It is then used
as a reference point to rollback to if the session errors and needs to
roll back. The savepoint is then released (independently from
completing successfully or failing).
Using save points means, that either all the statements inside the
entity manager are executed, or none of them are.
## Some implementation details
- A new session is created every time an entity manager is requested,
but this does not replace the flow's main underlying database session.
- `CordaPersistence.transaction` can now determine whether it needs
to execute its extra error handling code. This is needed to allow errors
escape `withEntityManager` blocks while allowing some of our exception
handling around subscribers (in `NodeVaultService`) to continue to work.
* CORDA-3762: Integration test exposing the problem reported
* CORDA-3726: Additional logging
* CORDA-3726: Prevent thread leaks
* CORDA-3726: New `journalBufferTimeout` parameter
* CORDA-3726: Override `journalBufferTimeout` parameter
* CORDA-3726: Making Detekt happier
* CORDA-3276: Account for extra thread user in MockNetwork
For real node this does not matter as `shutdown` can safely be called multiple times, which is not true for server thread provided by MockNetwork
* CORDA-3276: Do not make SMM shutdown "executor" as it belongs to AbstractNode
* CORDA-3276: Address input from @rick-r3
* CORDA-3276: Fix test after rebase
* [EG-503] Spent state audit tool
Fixes
* Refinements to notary query interfaces. Feature complete.
* EG-503: Introduce optional `notaryService` in `ServiceHubCoreInternal`
* Remove redundant logic following change to use extensions API
Co-authored-by: Viktor Kolomeyko <viktor.kolomeyko@r3.com>
* CORDA-3696: Temporary update to enable JDK11 build and test. Will eventually be switchable.
* CORDA-3696: Filter out the Nashorn warning.
* CORDA-3696: Add JDK11 classifier.
* CORDA-3696: Updated match string to cope with JDK11.
* CORDA-3696: Filtering out SPHINCS256_SHA256 where failing due to JDK11.
* CORDA-3696: Now remove SPHINCS256_SHA256 only if JDK11.
* CORDA-3696: Fix test failure - switch to regex matching.
* CORDA-3696: Hide the illegal access warnings.
* CORDA-3696: Check for Java11 when disabling Java11 warnings.
* CORDA-3696: Fix unneccessary non null check.
* CORDA-3696: Reverting build env to JDK8
* CORDA-3696: Revert hiding of illegal access warnings via Unsafe class.
* CORDA-3696: Remove internal access warnings and new JDK11 version checker.
* CORDA-3696: Updated build file for OS
* CORDA-3696: Removed typo
* CORDA-3696: Fixed space typo.
* CORDA-3696: Open modules to remove the illegal access warnings.
Co-authored-by: Adel El-Beik <adelel-beik@19LDN-MAC108.local>
* Run serialisation tests with both in-process and out-of-process nodes.
* Add custom serialisers and whitelists to Driver's AMQPServerSerializationScheme.
* Run serialisation tests with both in-process and out-of-process nodes.
* Add custom serialisers and whitelists to Driver's AMQPServerSerializationScheme.
When a flow is finished do not delete the checkpoint from the DB.
Instead, the FlowStatus is marked as Completed in the DB.
Updated numerous tests which relied on the flow being removed
when finished.
* CORDA-3651: addManifest now uses separate files for reading and writing.
* CORDA-3651: The jar scanning loader now closes itsself.
Co-authored-by: Adel El-Beik <adelel-beik@19LDN-MAC108.local>
* EG-464
Corda returns incorrect exit code in case if node is started with unknown/missing option
* fixed empty else block
* We should not use the parent's exception handler as it will quit and we have our own one
* SampleCordaCliWrapper implemented and tests to verify error handling.
* addressing code review comments
* Split out node-api tests that require test-utils/node-driver
* Add node-api test artefacts to publication list.
* Make test-common a transient dependency - downstream tests assume that it's available.
* Switch dependencies to java-library
* Fix magic package name for cordapp scanning in test
* CORDA-3644: Scan the CorDapp classloader directly for SerializationWhitelist.
* CORDA-3644: Filter CorDapps from out-of-process node classpaths by their manifest attributes. Also exclude directories and blatant test artifacts.
* Fix IRS Demo - its "tests" artifact had a non-standard classifier of "test".
* Remove unused dependencies from test-common
* Explicit imports and formatting
* Add core-test-utils project
* Add dependency
* Move Kryo serialization context to node-api (not serialization as we do not want to pull kryo into the serialization lib)
* Move AMQP server serialization scheme to node api
* Move serialization tests to node-api
* Move internal test helpers without further dependencies.
* Move out some types from RPCClientProxyHandler to node-api in preparation for moving the AMQP scheme
* Move client AMQP context to node-api so we can move the test serialization rule out.
* Move InternalSerializationTestHelpers to core-test-utils
* Moved testing.core to core-test-utils
* Make detekt happy
* Add api-scanner to core-test-utils
* Remove inlined package names introduced by IntelliJ refactoring
* Update api-current.txt to account for reordering.
* Add core-test-utils to list of published artifacts.
* Add missing import
* Location of things in api text has moved again (publish name of artefact?)
* Revert all additions to the API, leaving just the reordering
* Code review: fix up core-test-utils build.gradle and introduce kryo version constant.
* Remove OpenSsl flag from ssl config stub (can't be used from node-api)
* Suppress detekt warning
* Move core test util tests to the right module
* Expose kotlin test as a transient dependency - projects have come to rely on that.
* Fix typo in package name
* Throw SQLException or PersistenceException plain, that may come out of an unsafe subscriber
* Add explanatory comment about why we changed Observer.tee to use unsafe subscribe
* Introducing not unsubscribing version of Rx.Subscriber
* Wrap PublishSubjects with FlowSafeSubjects in all tests that test Observer.tee
* Minor code formatting
* Make rawUpdates Rx.Observers not unsubscribe when accessed from CordaServices - Do not allow rawUpdates subscribing from flows
* Warning fix: Add else block to when statement
* Revert "Wrap PublishSubjects with FlowSafeSubjects in all tests that test Observer.tee"
This reverts commit e419af86
* Correcting log message
* Improve log message
* Add fiber's id to log message and exception message
* Added test, asserting FlowSafeSubscriber is alive and re-accessed upon flow retry
* Logging flow name instead of flow id at VaultService.rawUpdates subscribing error
* Add kdoc to OnNextFailedException
* Minor text correction
* Update kdocs of FlowSafeSubject/ PreventSubscriptionsSubject
* Moved FlowSafeSubject under package node.internal as it is only used by NodeVaultService
* Add comment and update kdoc explaining how to subscribe with SafeSubscriber to FlowSafeSubject
* Change PreventSubscriptionsSubject#errorAction to be more specific; to return an Exception
* Minor text update
* Update messy comment
* Replace assertThat with assertEquals
* Splitting heartBeat to heartBeat1 and hearBeat2 for more clear asserting
* Correcting comment
* Update messy comment
* Splitting heartBeat into heartBeatOnNext and heartBeatOnError
* Update test name
* Add explanatory comment to test
* Update test name
* Update test and add test comment
* Moving NotarisedTxs from SendStateFlow to VaultObserverExceptionTest inside NodeHandle.getNotarisedTransactionIds
* Moving SubscribingRawUpdatesFlow from ErrorHandling to VaultObserverExceptionTest
* Update kdoc of FlowSafeSubscriber and FlowSafeSubscriber.onNext
* Make kdoc more clear
* Throw exception upon accessing VaultService.rawUpdates from within a flow
* Changing exception thrown when accessing VaultService.rawUpdates from within a flow to a CordaRuntimeException
* Minor kdoc update
* Update test comment
* Update kdoc of FlowSafeSubscriber
* Introducing Observable.flowSafeSubscribe public API method to subscribe with -non unsubscribing- Rx.Subscribers to Observables. It also replaced FlowSafeSubject
* Move CustomSafeSubscriber outside test methods
* Minor text update
* Add timeout to tests
* Update kdoc of flowSafeSubscribe
* Update kdoc of flowSafeSubscribe
* Update kdoc of flowSafeSubscribe
* Move FlowSafeSubscriber and flowSafeSubscribe under their own package
* Fix detekt issue
* Update Detekt baseline
* Revert "Update Detekt baseline"
This reverts commit 793a8ed9
* Fix Detekt issue
* Moved strictMode flag from flowSafeSubscribe to OnFlowSafeSubscribe
Moved OnFlowSafeSubscribe into internal package
Integration tested flowSafeLooseSubscribe
* Suppress Rx Deprecation
* Rename flowSafeSubscribe to flowSafeObservable
* Renaming flowSafeObservable to continueOnError and FlowSafeSubscriber to ResilientSubscriber
* [NOTICK] Add a custom detekt rule for tests with no timeout, and fix remaining missing timeouts
* [NOTICK] Add a test for custom detekt rules and tidying
* add timeout annotation to new test
Co-authored-by: Stefano Franz <roastario@gmail.com>
* CORDA-3565: `ServiceStateSupport` and supporting classes
* CORDA-3565:Plug `ServiceLifecycleSupport` into `MessagingService`
* CORDA-3565: Detekt baseline update
* CORDA-3565: React to MessagingServer going up and addition logging for up/down
Co-authored-by: Matthew Nesbit <matthew.nesbit@r3.com>
Observers registered on NodeVaultService#rawUpdates, if they throw an exception when called from serviceHub#recordTransactions and if this exception is not handled by the flow hospital, then this leads to the transaction not being recorded in the local vault. This could get the ledger in an out of sync state.
In the specific case this happens within FinalityFlow#notariseAndRecord this leads to the transaction being notarized but not recorded in the local vault nor broadcasted in any counter party. The -failed to be recorded locally- transaction and its output states are not visible to any vault, and its input states not able to consumed by a new transaction, since they are recorded as consumed within the Notary. In this specific case we need not loose, by any means, the current transaction.
We will handle all cases by catching all exceptions thrown from serviceHub#recordTransactions, wrapping them with a HospitalizeFlowException and throwing it instead. The flow will get to the hospital for observation to be retried from previous checkpoint on next node restart.
Deprecate FlowAsyncOperation and reimplement public versions FlowExternalOperation and FlowExternalAsyncOperation.
await added to FlowLogic to allow easy calling from both Java and Kotlin. There are two overrides of await (one for FlowExternalOperation and FlowExternalAsyncOperation).
Implementations of FlowExternalOperation return a result (written as blocking code) from their execute function. This operation will then be executed using a thread provided by the externalOperationExecutor.
Implementations of FlowExternalAsyncOperation return a future from their execute function. This operation must be executed on a newly spawned thread or one provided by a thread pool. It is up to developers to handle threading in this scenario.
The default thread pool (externalOperationExecutor) can be configured through the flowExternalOperationThreadPoolSize node config.
The current implementation leaves FlowAsyncOperation alone, meaning that any developers that have used it (even though it is internal) won't need to change their apps. If this was not concern I would delete it completely and replumb the state machine code. Instead, it has been marked with @DoNotImplement and executeAsync is annotated with @Deprecated
* CORDA-2942: Port minimal set of changes to make lifecycle events work
... and make codebase compile.
* CORDA-2942: Undo some changes which are not strictly speaking necessary
* CORDA-2942: Make `NodeServicesContext` leaner and delete `extensions-api` module
* CORDA-2942: Reduce even more number of files affected
* CORDA-2942: Integration test fix
* CORDA-2942: Make events `AfterStart` and `BeforeStop` generic w.r.t. `NodeServicesContext`
* CORDA-2942: `NodeLifecycleObserverService` and a set of integration tests.
Public API violations are expected as well as integration tests failing.
* CORDA-2942: Re-work to introduce `ServiceLifecycleObserver`
* CORDA-2942: Explicitly mention a type of exception that may be thrown for some events.
* CORDA-2942: Register `ServiceLifecycleObserver` through `AppServiceHub`
* CORDA-2942: Fix integration test + KDocs update
* CORDA-2942: Detekt and `api-current` update
* CORDA-2942: Improvement to `CordaServiceLifecycleFatalTests`
... or else it has side effects on other tests.
* CORDA-2942: Add an integration test for new API use in Java
Driver test is written in Kotlin, but services definition is written in Java.
Also KDocs improvements.
* CORDA-2942: Documentation and release notes update
* CORDA-2942: First set of changes following review by @mnesbit
* CORDA-2942: Second set of changes following review by @mnesbit
* CORDA-2942: Added multi-threaded test
* CORDA-2942: Fixes
* CORDA-2942: Undo changes to `api-current.txt`
* CORDA-2942: Bare mimimum change to `api-current.txt` for CI gate to pass.
* CORDA-2942: Address review feedback from @rick-r3
* CORDA-2942: Detekt update
* CORDA-2942: Delete `ServiceLifecycleObserverPriority` and replace it with `Int` after discussion with @mnesbit
* CORDA-2942: Introduce more `NodeLifecycleEvent` and switch services to listen for those events
* CORDA-2942: Few more changes after input from @rick-r3
* First stub on integration test
Unfinished - hang on issue and pay
* CORDA-2942: Switch to use out-of-process nodes for the inetgration test
Currently Alice and Notary stuck waiting to hear from each other.
* CORDA-2942: Extra log lines during event distribution
* CORDA-2942: Asynchronously distribute lifecycle events
* CORDA-2942: Await for complete P2P client start-up
Next step: Add vault query to integration test
* CORDA-2942: Asynchronously distribute lifecycle events
Next step: Improve integration test
* CORDA-2942: Fix test broken by recent changes and improve logging
* CORDA-2942: Improvement of the test to be able to monitor actions performed by @CordaService in the remote process
* CORDA-2942: Add node re-start step to the integration test
* CORDA-2942: Remove `CORDAPP_STOPPED` event for now
* CORDA-2942: s/CORDAPP_STARTED/STATE_MACHINE_STARTED/
* CORDA-2942: Inverse the meaning of `priority` as requested by @rick-r3
* CORDA-2942: Register `AppServiceHubImpl` for lifecycle events and put a warning when SMM is not ready.
* Do not register cordapp custom serialisers when using attachment classloader.
* Record the URLs of CorDapp JARs that contain custom serialisers. Include these JARs as extra attachments if we discover that we're missing a custom serialiser during transaction verification.
* Check for disabled serializer when explicitly requesting a custom serializer.
Refactor test case to force use of a custom serializer.
* Tidy up basic custom serializer test.
* Also test that TransactionBuilder rejects missing custom serializers.
* Remove test whitelists, which should not be needed with custom serialisers.
* Add changelog entry. Also align TestCordappImpl.findRoots() with OS backports.
* Second approach based around CorDapps inside AttachmentStorage - report missing type descriptor or any non-composable types.
* Initial implementation of Corda-Fixup rules inside a CorDapp jar.
* Replace original "automatic attachment fixing" mechanism completely.
* First review comments: restore "missing class" logic to TransactionBuilder.
* Restore "missing class" mechanism as fallback for SignedTransaction too.
* [CORDA-3436] Allow CorDapps access to node diagnostic information
* [CORDA-3436] Fix API breakages
* [CORDA-3436] Improve documentation around diagnostics service
* [CORDA-3436] Remove CorDapps from the diagnostics information
* [CORDA-3436] Silence detekt warning
* CORDA-3471: Create `CordaTransactionSupport` and use wherever possible instead of `CordaPersistence`
* CORDA-3471: Address comments by @mnesbit
- Relocate `CordaTransactionSupport` to `core`
- Create a lighter version of transaction - `VaultTransaction` that gives access to `session` object only.
* CORDA-3471: More changes after discussion with @mnesbit
- Rename `VaultTransaction` into `SessionScope`.
* CORDA-3471: Revert changes to most of the files after conversation with @mnesbit and @rick-r3
* CORDA-3471: Introduce `CordaTransactionSupportImpl` and make it accessible via `AppServiceHub`.
* CORDA-3471: Minor change (comment).
* CORDA-3471: Address input from @mnesbit
* CORDA-3471: Address input from @rick-r3
* CORDA-3471: Make Detekt happier
* CORDA-3471: Add a new test that proves transactions can be started from client threads
As requested by @mnesbit
* CORDA-3471: Change log and documentation update.
As requested by @mnesbit
* CORDA-3464: Also scan attachment:// URLs for custom serializers.
* Only scan the given classloader - ignore this classloader's parents.
* Upgrade to ClassGraph 4.8.58 - for "robustness fixes".
* Register the attachment:// URL scheme using AttachmentsClassLoader.
* Add integration test for custom serializer in contract state.
* Rename Currancy -> Currantsy, just to make the point.
* Revert "Revert "CORDA-3307 - add support for environment variables in linux (#5523)" (#5643)"
This reverts commit 03ab258fc2.
* Env variables with underscore are now validated using schema validation and checking for unknown key errors.
* Resolving comments from PR review.
* Fix for deprecated import.
* Reworked logic according to PR review.
* Resolved bad string parsing problems where the json structure could be broken if some symbols were included in the key or value.
* TM-88 only write the test to the file if it passes otherwise retry
* TM-88 1 failing test for testing purposes
* TM-88 fail an integration test instead of unit test
* TM-88 include failed test for retry
* TM-88 new logic for retrying failed tests
* TM-88 refactored to use retry class when dealing with test failures + copy results even after pod failure
* TM-88 remaining pods as set to prevent duplicates, limit retries to prevent crashed build and a bit more logging
* TM-88 atomic int instead of int array
* TM-88 moving atomic int outside retry loops
* TM-88 removing second retry as it is not needed
* TM-88 small fix to final copy
* TM-88 while loop to prevent destruction of results on test retry
* TM-88 removing shutdown hook
* TM-88 reverting to previous implementation
* TM-88 copying xml files before retry
* TM-88 removing fail
* Quick and dirty change to stop "Unable to start notaries." error message (#5686)
"Unable to start notaries. A required port might be bound already" is
returned whenever a startup error occurs while starting the notary nodes
in driver tests. This hides the real error.
This change prints the actual error to std_err and read from file
at a later point. This means the real error is not lost and will be
shown in failed builds.
* Suppress detekt warnings
* * CORDA-2876: Migrate DJVM serialization modules into Corda.
* Pre-generate Corda classes for DJVM sandbox when node boots in production mode.
* Ensure that all DJVM test contract CorDapps are signed.
* Test examining attachments within DJVM sandbox.
* Test Contract.verify() using cryptographic verify function.
* Add test cases for more non-determinism in Contract.verify().
* Update node-driver to support testing nodes with DJVM support.
* Modify Node to allow alternative DJVM configurations for testing.
* Refactor DeterministicVerifierFactoryService for default use-case.
* Small whitespace and code-style refactors.
* Create and activate a DJVM execution profile for the Node.
* Revert making Verifier implement AutoCloseable.
* Allow the node to cache sandboxed Corda byte-code for reuse.
* Use updated Quasar agent that knows not to touch DJVM classloaders.
* Fix Quasar's package exclusions globs for DJVM.
* Deserialise LedgerTransaction into the sandbox for Contract.verify().
* Add the DJVM's serialisation modules to the Corda node.
* Update the node for the latest DJVM API, and preserve the ConstructorForDeserialization annotation on user contract classes.
* Add corda-dev to repositories while DJVM is SNAPSHOT.
* Migrate DJVM specialisation into AbstractNode's ServiceHubInternalImpl.
* Exclude sandbox.** and shaded djvm.** classes from Quasar agent.
* Add the corda-dev repository to :node for the deterministic runtime.
* Turn Verifier into an abstract base class that is specialised by BasicVerifier and DeterministicVerifier.
* Add the Corda deterministic libraries to the Node, and split the DJVM sandbox across two SandboxClassLoader instances.
* Add DJVM to contract verification path inside Corda Node.
* Minor lambda simplifications and removing unused import.
* CORDA-2871: Remove @CordaSerializable from LedgerTransaction.
* CORDA-2871: Add a callback to ServicesForResolution to allow the Node to modify a LedgerTransaction object.
* CORDA-2871: Refactor the contract verification code into a separate class,
and allow LedgerTransaction to choose different Verifier objects.
* Update DJVM to use Corda 4.4-SNAPSHOT. (#95)
* CORDA-3330: Allow DJVM to preload / pregenerate classes from selected jars. (#92)
* Add support for SourceClassLoader.getResources() to DJVM.
* Allow a SandboxConfiguration to preload sandbox byte-code for all classes inside jars containing META-INF/DJVM-preload.
* CORDA-3309: Remove explicit try-catch in favour of UncaughtExceptionHandler. (#91)
* CORDA-3309: Install UncaughtExceptionHandler for DJVM tasks. (#88)
* Fix tests broken by Windows line endings. (#82)
* CORDA-3292: Reimplement ExecutionProfile as a data class. (#80)
* CORDA-2877: Refactor how we create child SandboxConfiguration objects. (#76)
* CORDA-2877: Load bytecode from a persistent cache to prevent repeated rewriting. (#75)
* Refactor byte-code cache to SandboxConfiguration instead of AnalysisConfiguration. We cannot "mix and match" byte-code generated by different sets of rules.
* CORDA-3137: Enhance annotation handling so that we can allow some annotations to be mapped into the sandbox without also needing to be stitched. (#72)
* CORDA-2871: Minor cosmetic fixes. (#69)
* CORDA-3218: Align DJVM with internal Corda Serialisation API. (#68)
* Ensure we get the latest SNAPSHOT of the serialisation code.
* CORDA-2871: Refactor SourceClassLoader to define source classes. (#66)
* Rewrite SourceClassLoader to support parent/child relationships.
* Revert catching TypNotPresebtException - it was a symptom of a bigger problem.
* Remove AutoCloseable from AnalysisConfiguration and SourceClassLoader.
* SourceClassLoader.getResource() must delegate to its parent first.
* CORDA-2871: Ensure ClassLoader.loadClass() throws ClassNotFoundException for all cases where the class cannot be found. (#64)
* CORDA-2871: Modify sandbox tasks to implement both java.Function and sandbox.Function (#62)
* Make TaskExecutors implement BiFunction to make them composable.
* Create ImportTask to wrap a java.Function inside a sandbox.Function.
* Add createExecutor() and createRawExecutor() APIs to SandboxClassLoader.
* Update serialization to use SandboxClassLoader.toSandboxClass().
* Remove a layer of lambdas from the serialisation code.
* Update SandboxExecutor and SandboxRawExecutor.
* Rename Executor to TaskFactory.
* Rename dangling executor -> taskFactory.
* CORDA-2871: Sanity fixes! (#63)
* Improve message for SandboxClassLoadingException.
* Fix serialisation API for using sandboxed environment.
* CORDA-3174: Extend serialisation to include InputStream and OpaqueBytesSubSequence. (#60)
* Update DJVM Example project for serialisation.
* Add serializers for InputStream and OpaqueBytesSubSequence.
* Support ZIP Inflater and CRC32 inside the sandbox.
* Allow the DJVM to wrap java.io.InputStream as sandbox.java.io.InputStream.
* Configure tests also to preserve @DeprecatedConstructorForDeserialization.
* CORDA-3174: Implement Corda serialization modules. (#59)
* Create DJVM serialization modules.
* Create test cases for Array<T>, List<T> and List<Array<T>>.
* Refactor SandboxPrimiveSerializer for all primitive types.
* Implement SandboxCollectionSerializer to support Collection types.
* Implement SandboxMapSerializer to support Map types.
* Attempt to fix infinite loop when computing Collection and Map fingerprints.
* Apply special handling when deserialising sandbox.java.lang.Character.
* Remap Java primitive types to sandbox Java object types to deter evolution.
* Use Class.getPackage().getName() to determine sandbox package name.
* Implement SandboxEnumSerializer to support Enum types.
* Implement SandboxPublicKeySerializer to support Java security keys.
* Add serialization projects to the composite example project.
* Implement serializers for BigInteger, BigDecimal, Currency and StringBuffer.
* Test that deserialising does not instantiate the untrusted user classes.
* Implement serializers for java.time.* types.
* Add serialiser for BitSet - currently disabled until BitSet itself is supported.
* Add serialisers for EnumSet and Class.
* Include support for EnumMap in the SandboxMapSerializer.
* Ensure the DJVM Example project's tests preserve @CordaSerializable.
* Add support for UUID as a primitive type.
* Use common abortReadOnly() method for declaring serialization as unsupported.
* Streamline the API for deserialising into the sandbox.
* Add preliminary support for deserialising X.509 certificates.
* Implement serializer for java.util.Optional.
* Refactor configuration of the sandbox serialization scheme.
* Add tests for deserialising arrays of basic types.
* Include method annotations in annotation stitching. This ensures that `@ConstructorForDeserialization` is not dropped.
* Enable test for SandboxBitSetSerializer.
* Enable tests for X.509 serializers.
* Implement serializers for ProtonJ primitive types.
* Serialize java.util.Date as a primitive type.
* Add the bintray Gradle plugin to the serialisation modules.
* Do not publish serialisation modules - they will become part of Corda itself.
* CORDA-2876: Only apply DJVM sources to Node Driver when devMode=true.
* Resolve DeteKT warnings.
* Require Node's JVM to set -Dnet.corda.djvm=true in order to enable DJVM.
* Enable DJVM for DemoBench nodes.
* Disable Quasar instrumentation verification for DemoBench nodes.
* Upgrade to DJVM 1.0-RC01.
* Try to modify DriverParameters in a more "ABI friendly" way.
* Refactor and simplify sandbox deserialisation of primitive objects.
* Review fixes.
* Update EvolutionSerializerFactory to handle sandboxed primitive boxed types.
* CORDA-3350: Increase size of constraints column (#5639)
* Detekt
* Update api file with new threshold
* Add check in transaction builder
* Revert "Add check in transaction builder"
This reverts commit ca3128f44c.
* Add check for max number of keys
* Update api file
* Address Tudor's comments
* Remove check for pre-5 and add test for EC keys
* fix typo and rename liquibase script
* updated docs with measurement numbers for composite keys
* Make detekt happy again
* TM-51 Prep for reading and writing test results to artifactory.
* TM-51 Tests from target branch if no tests for current branch
* TM-51 Placeholder for test averaging over runs.
* TM-51 Replace slashes in branch names used as tags.
* TM-51 More placeholder work for the mean duration work.
* TM-51 Write out average tests results as as csv.
The csv file should grow and be updated on each run. This includes whether or not we are running unit tests, integration tests and so on.
* TM-51 Comment out old junit test archiving, add more comments.
* TM-51 Zip task needs to depend on a csv creation task.
If there isn't a csv file present, then the zip task doesn't run due to 'NO-SOURCE'
* TM-51 Zip task should ignore empty dirs
* TM-51 Fix up loading of test results.
We were looking for the wrong artifact name.
Add a bit more logging.
* TM-51 Fix up possible problem with allocating by class distribution.
If we encounter a class we haven't seen before, there won't be any tests.
This means we should give it some weight. '1' is far too small.
* TM-51 Test that we are definitely increment the run count.
Tracking down whether the zipped csv file should have incremented.
* TM-51 Better default value for missing test/class names.
Begin by using mean unit test duration, but we have the option to bump
that to the mean class unit tests duration.
* TM-51 More debug information around csv writing.
We should be incrementing the tests.
* TM-51 Reload the csv before updating it.
* TM-51 Reduce verbosity of logging.
* TM-51 Reinstate unit tests. Remove logging verbosity.
* TM-51 Load tests from artifactory in memory and avoid interim file.
* TM-51 Better handling of zero duration tests.
Ensure we return zero times from junit artifacts which may either be zero or have no recorded time. Before writing the tests duration csv file, store those with a known time, and then store those with zero using the average time.
* TM-51 Log whether we have recorded a test.
Tracking down the curious case where we seem to not be rerunning the
same set of tests on the second run.
* TM-51 Capture junit files as well.
Trying to track down whether some tests are intermittently run.
* TM-51 Change task dependencies to ensure ziptask is triggered.
* TM-51 Remove test assertion, and trigger build
* TM-51 Add corda/enterprise to artifactory tag name.
Moved properties to own file.
* TM-51 Remove unnecessary mean class-based duration.
* TM-51 Add more BucketingAllocator tests.
We need these to nail down its behaviour some more.
* TM-51 Further log information.
We don't seem to be finding the tests in the 'production' runs which is odd.
* TM-51 corda type double set?
* TM-51 do not set the project type in the properties.
SRP and all that.
* TM-51 better plan reporting
* TM-51 duration may be zero
Another runtime problem that doesn't show in tests.
* TM-51 better plan reporting
* fix missing space after image id
* fix merge issue in DistributedTesting
* TM-51 remove unused code when GET/PUT-ting to Artifactory.
* TM-51 put tasks in gradle group and tidy up zip task creation
* TM-51 Fix the junit XML path.
* TM-51 Fix the task graph
* TM-51 Less logging
Reapply change that was lost during merge - Adjust resolution of byteman jar to use java 11 compatible mechanism. - a1077092
Manual cherry pick of these changes (a1077092 + 3fafbe55)
Byteman is absent for most of the integration tests and long stacktrace is seen in the log
presently that un-necessarily attracts attention and consumes logging space.
(cherry picked from commit 2b6e59e7bd)
* CORDA-3194 Replay start flow events when responding flow fails initial checkpoint commit
Logic has already been added to recover from initial checkpoint commit
failures on the initiating flow side but this did not suffice for
the same failure occurring on the responding flow's side.
The same idea has been added to resolve the responding flow's issue.
`ExternalMessageEvent` now has a `flowId` that is maintained on the
event. Messages can then be replayed to start/restart the flow, while
the event provides the flow id to each flow start.
Each `ExternalMessageEvent` implementation generates a random `flowId`
when constructed.
Events are stored in Artemis. This allows the solution to recover across
node restarts as the events will be pulled from artemis again when
restarting.
In the future `flowId`s will probably moved off of the events and
generated purely on the responding flow's node.
* CORDA-3194 Add test to verify that errors removing a responding flow are recoverable
* Unwrap rx.OnErrorNotImplementedException so the hospital can handle the cause appropriately
* Add db failure cordapp
* Renamed folders to avoid ambiguity in gradle
* Add integration test for exception hospitalisation when thrown from an RX observable.
* Make the test slightly cleaner
* Fix the schema to actually match the requirements for my custom state. Thanks a bunch, H2.
* Switch test to use SqlException base class.
* Schedule error event if we detect that a commit or db flush has thrown (forcing the flow to error even if customer code then goes ahead to swallow the exception)
* Revert change to schedule extra error
* Add more tests for edge case with DB exceptions, changed CorDapp to suppor this an hook in the flow hospital
* Warning about unsubscribe
Check state transitioned from clean to error for hospital admission.
* Match the test to our actual expectations
* Revert "Revert change to schedule extra error"
This reverts commit 43d47937
* Prevent suppression of errors arising in `transaction()` and `jdbcConnection()`
* Test for SqlException caught trying to escape from recordTransaction and suppressed outside being intercepted.
* More tests for various error/catch combinations
* Clean up and comments
* Code reformat
* Fix test compilation
* Added a new way for environment variables to be loaded, which allows for underscore based separation.
* Moved test to its own kotlin file.
* Added case insensitivity support.
* The corda. prefix is now case insensitive too.
* Removed unused variable.
* Added env variables support for driverDSL. Shadowing corda. properties raises an exception.
* Driver api stability fix.
* Changed type of cordapps param to reflect the real one, rather than what IntelliJ auto completed.
* Some detekt issue fixes. Spread operator removed, baselined api stability constructors and buggy line.
* Fixed misspelled variable.
* Reverted unintentional changes.
* Added suppress instead of changing baseline.
* Reworked logic to handle previously defined CORDA_ starting properties and handle accordingly. Fixed a bug where wrong class was used for reflection walking.
* Fix for detekt issues.
* Changed message to a more understandable one.
* Changelog + doc note, console error grammar.
* Changes according to PR review.
* add ability to index by class OR method
* disable unit tests again
* pending commit
* stream output of build for debugging
* remove git from the base image
* re-enable NodeRPCTests
* add ability to distribute tests based on TeamCity CSV output for test times
* try enabling unit tests again after test distribution has been fixed
* refactor BucketingAllocator to be a class, which bucketingAllocatorTask delegates to.
* finishing touches for improved test distribution
* create new pipelines for builds
* CORDA-3232: Make backward compatible RPC client changes
Such that it will be able to talk to new and old server versions.
* CORDA-3232: Make backward compatible RPC server changes
Such that it will be able to talk to new and old client versions.
* CORDA-3232: Trick Detekt
* CORDA-3232: Integration test for multi-interface communication.
* CORDA-3232: Add legacy mode test.
* CORDA-3232: Making Detekt happier
* CORDA-3232: Fix Detekt baseline after merge with `4.3` branch
* CORDA-3232: Incrementing Platform version
As discussed with @lockathan
* CORDA-3232: Fix legacy test post platform version increment
* CORDA-3232: Use recursive logic to establish complete population of method names
* Revert "CORDA-3232: Incrementing Platform version"
This reverts commit d75f48aa
* CORDA-3232: Remove logic that conditions on PLATFORM_VERSION
* CORDA-3232: Making Detekt happier
* CORDA-3232: Few more changes after conversation with @mnesbit
* CORDA-3232: Make a strict match to `CordaRPCOps` on client side
Or else will fail:
net.corda.tools.shell.InteractiveShellIntegrationTest.dumpCheckpoints creates zip with json file for suspended flow
Flagging that `InternalCordaRPCOps.dumpCheckpoints` cannot be called.
* CORDA-3232: Address PR comments by @rick-r3
* CORDA-3232: Address further review input from @rick-r3
* Change the way how methods stored in the map;
* Extend test to make sure that `CordaRPCOps` can indeed be mixed with other RPC interfaces.
* Generalise participant parsing code & additional test cases.
* Use a common predicate to expand the participants query (when specified more than once - eg. in fungible and linear query criteria).
* Introduce some re-usable functions.
* Additional code clean-up and improvements.
* Fix detekt MaxLineLength errors.
* Do a proper check for whether the quasar agent is active instead of sniffing JVM args
* Use JavaAgent.isActive instead of SuspendableHelper.isJavaAgentActive for clarity
* Removed IdentityServiceInternal as it is no longer used.
* Removed externalIdForPublicKey API from KMS and added it to IdentityService.
Added a registerKeyToExternalId API on IdentityService.
* Fix remaining compile errors.
* Removed "registerKeyToParty" and in its place added a new registerKey method which takes a PublicKey, Party and optionally a UUID.
Added a cache to the "PersistentIdentityService" to store other node's public keys.
Added the cache and new hibernate entity to all teh places where one needs to add them.
New keys created by teh node now automatically get associated entries in the KEY -> PARTY map and optionally the KEy -> EXT ID map.
Added a test.
* Removed old comments and TODOs.
* Fixed broken test.
Added comments/explanations for what's going on in IdentityService.
Updated kdocs.
* First try at Implementing publicKeysForExternalId.
* Fixed broken test.
* Added migration.
Amended existing persistent identity service migration to handle new migration.
Addressed some review comments.
* Fixed broken test - whoops!
* Implemented mock identity service methods.
* Added back exception when remapping a key to a different party.
* Fixed compile errors.
Fixed broken tests.
* Use set instead of first entry in ourNames.
Allow node operators to blacklist signing keys (using blacklistedAttachmentSigningKeys config option). These blacklisted keys prevent attachments that are received over the network from being trusted. The docs have been updated to detail how to generate the key hashes that the config requires.
A new shell command attachments trustRoots has been added to see what attachments exist on the node along with information about their trust and where it comes from.
run dumpCheckpoints has been replaced by checkpoints dump as InternalCordaRPCOps needed to change to prevent a function that is meant to be internal from being visible on the shell.
* Split integration tests
* add simple example of printing all methods annotated with @Test
* add docker plugin to root project
remove docker plugin from child projects
add Dockerfile for image to use when testing
add task to build testing image to root project
* add comment describing proposed testing workflow
* simple attempt at running tests in docker container
* add my first k8s interaction script
* add fabric8 as dependnency to buildSrc
* before adding classpath
* collect reports from containers and run through testReports
* re-enable kubes backed testing
* for each project
1. add a list tests task
2. use this list tests task to modify the included tests
3. add a parallel version of the test task
* tweak logic for downloading test report XML files
* use output of parallel testing tasks in report tasks to determine build resultCode
* prepare for jenkins test
* prepare for jenkins test
* make docker reg password system property
* add logging to print out docker reg creds
* enable docker build
* fix gradle build file
* gather xml files into root project
* change log level for gradle modification
* stop printing gradle docker push passwd
* tidy up report generation
* fix compilation errors
* split signature constraints test into two
* change Sig constraint tests type hierarchy
* tidy up build.gradle
* try method based test includes
* add unit test for test listing
* fix bug with test slicing
* stop filtering ignored tests to make the numbers match existing runs
* change log level to ensure print out
* move all plugin logic to buildSrc files
* tidy up test modification
add comments to explain what DistributedTesting plugin does
* move new plugins into properly named packages
* tidy up runConfigs
* fix compile errors due to merge with slow-integration-test work
* add system parameter to enable / disable build modification
* add -Dkubenetise to build command
* address review comments
* type safe declaration of parameters in KubesTest
* migrate PersistentIdentityService to use key.toShortString()
update definition of PublicKeyToExternalId mapping to allow fast lookup by externalId/publicKey
* fix misspelled table name
* add test of migration script
* add design document for proposal to move IdentityService to using the correct PK.toStringShort() method for hashing a publickey
* add enterprise testing considerations to design
* address review comments
* fix compilation errors
* modify PublicKeyToOwningIdentityCache to use toStringShort() as it's lookup key
* address syzmon's code review comments
* CORDA-3139: Cater for port already bound scenario during port allocation
Also moved `SharedMemoryIncremental` into a separate file as it getting bigger
and improved readability of logic and added some logging.
* CORDA-3139: Fix the unit test
* CORDA-3139: Improve logging when failing
* CORDA-3139: Improve stability of the test
* CORDA-3018 Allow loading an untrusted contract jar if another attachment exists that was signed with the same keys and uploaded by a trusted uploader
`TransactionUtils.isAttachmentTrusted` requirements have been relaxed
to allow an untrusted attachment to be loaded as long as another
attachment exists that is signed by the same keys and was uploaded
by a trusted uploader.
The requirement of containing the same contract classes has been
removed. Therefore the contents of the existing trusted attachment
no longer matters.
* CORDA-3018 Allow a subset/intersection of signers in `isAttachmentTrusted`
Allow a subset/intersection of signers to satisfy the signer
requirements of `isAttachmentTrusted`. This allows an "untrusted"
attachment that is signed by one or more keys to be "trusted" as long
as another trusted attachment already exists that is signed by at least
one of the "untrusted" attachments signers.
A cache of trusted and untrusted public keys is now held (replacing the
previous cache of `List<PublicKey>`.
Tests have been added to `NodeAttachmentServiceTest` to confirm that
an attachment query using an `EQUAL` statement will actually return
attachments that are signed by any of the keys passed into the query.
Confirming this allowed an `EQUAL` query to satisfy the search that
had to be done as part of this change.
`MockAttachmentStorage`'s query criteria was updated to better match
the real `NodeAttachmentService` implementation.
* CORDA-3018 Update cache name and kdoc on `isAttachmentTrusted`
* CORDA-3018 Verify that chains of trust do not occur
* CORDA-3018 Switch keys around to improve chain of trust tests
* [ENT-3801] Store transactions in the database during transaction resolution (#2305)
* ENT-3801: Store downloaded txns as part of the backchain resolution into the db rather than the checkpoint
It's very inefficient to store the downloaded backchain in the checkpoint as more of it downloaded. Instead, if a threshold is reached (which currently defaults at 0) then the backchain is stored in the transactions table as unverified. A new is_verified column has been added to track this. Initially testing on the OS codebase has been very promising but unfortunately this current code is not quite ready. I had to quickly port it to ENT as this is meant to be an ENT-only optimisation.
To that effect, there is a TransactionResolver abstraction with two implementations: an in-memory one which has the old behaviour, and which will be the behaviour for OS, and a db one.
DBTransactionStorage hasn't been fully updated and I had to comment out the optimistic path for now.
Most of these changes will need to be ported to OS to keep the merge conflicts in check, but obviously not DbTransactionsResolver and the "is_verified" changes in DBTransactionStorage. DBTransactionStorage does have other refactoring which will make sense to port though.
* [ENT-3801] Start work on allowing modifications in AppendOnlyPersistentMap
* [ENT-3801] Add transaction resolver tests
* [ENT-3801] Adjust suspendable annotations
* [ENT-3801] Fix the ResolveTransactionFlow tests
* [ENT-3801] Update ResolveTransactionsFlow tests
* [ENT-3801] Add a liquibase migration script for isVerified
* [ENT-3801] Ensure the migration runs in the correct place
* [ENT-3801] Handle resolution of already present transactions
* [ENT-3801] Fix compile error in performance test app
* [ENT-3801] Logging and comment updates, plus a test case
* [ENT-3801] Add a notary change resolution test
* [ENT-3801] Add a contract upgrade transaction test
* [ENT-3801] Change new column to be a character based status
* [ENT-3801] Migration script type change
* [ENT-3801] Address first round of review comments
* [ENT-3801] Update variable names in AppendOnlyPersistentMap
* [ENT-3801] Another variable name clarification
* [ENT-3801] Fix missing name changes
* [ENT-3801] Make the signature list immutable when constructing cache value
* [ENT-3801] Add a locking strategy for unverified transactions
* [ENT-3801] Address tidying up review comments
* [ENT-3801] First attempt at ensuring locks are released after commit
* [ENT-3801] Remove references to old cache name
* [ENT-3801] Update locking logic
* [ENT-3801] Fix potential deadlock with read/write transaction locks
* [ENT-3801] Remove read locks, and ensure minimal extra suspends
* [ENT-3801] Fix build issues in tests
* [ENT-3801] Use the correct clock when calculating sleep durations
* [ENT-3801] Add a pessimism flag for writing verified transactions
* [ENT-3801] Change logging statement to debug
(cherry picked from commit 8ab6a55e17)
* [NOTICK] Fix up imports for some changed files
* [NOTICK] Fix transaction resolution tests
* [NOTICK] Reinstate the DBTransactionsResolver
* [NOTICK] Add the topological sort back to recordTransactions
* [NOTICK] Adjust test case to remove dependency on query ordering
* [NOTICK] Make test code match that in ENT
* Fix test execution flakiness on fast hardware: set node info polling interval to 1 second in DriverDSL Node Startup (was only being set to 1 sec in Node Registration). Follow-up to https://github.com/corda/corda/pull/5240
* Diagnostics: add additional logging to NodeInfoFilersCopier.
* Diagnostics: add additional logging to NodeInfoWatcher
* Downgrade logging level severity to debug.
* Make atomic counter unique across instances.
* Moved core.flows and core.contract tests
* move internal tests
* move node, schemas and serialization tests
* Move transactions tests
* Move test access helper into test package
* Move remaining tests, and create access helpers to test internals.
* Fix test dependencies.
* Delete some cruft that flagged up on the API checker
* Add readme explaing where tests need to go.
* fix typo
* add a shared memory port allocator to allow multiple processes to share a single allocation pool
* remove dangerous reset function on port allocator
* set forkCount = 2 in node integration test
* only allow one build of a cordapp at any given time for Driver tests
* make all portallocation requests use same starting point
* globally set forks to 6
* tweak forking parameters to allow parallel builds
* tweak unit test parallelism
* 2 workers for integrationTest
* some more tweaks for parallel builds
* some more tweaks for parallel builds
* seems that 49K is not the start of ephemeral ports on all kernels
* tweak parallel settings
* try fix RPC shutdown test in parallel env
* add some logging for RPC shutdown test
* added some logging around PortAllocation tests - try figure out where they are getting stuck
* added some logging around PortAllocation tests - try figure out where they are getting stuck
* fix api-scanner tests
* minimize api changes
* revert to complying with existing API
* add the AtomicInteger for api compatibility reasons
* make sizing script executable
* address review comments pt1
* address review comments pt2
* fix compile errors after review comments
* return to using home dir as temp dir seemed to interact badly with gradle
