Wait for log file to indicate that a driver node process is running, instead of trying to open a socket on the port the node is attempting to binding on. This means the driver is more responsive to the node being ready, as well as removing a race condition where the binding test could block the node from starting.
As sometimes nodes do not log this information, after 20 seconds we presume the node is up.
* Move log messages that are not useful in typical usage from info to debug level to reduce log spam.
* Add node startup check before attempting to connect.
Maven central will not allow the node-driver to be published without a Javadoc `.jar` file, even if it is empty. This adds an empty Javadoc `.jar` to the output.
In enterprise, `AuthDBTests` picked up a schema from a unit test and
included it in the cordapp it builds. This schema does not have a
migration and therefore fails the integration tests.
`NodeBasedTest` now lets cordapps to be defined and passed in to avoid
this issue. It defaults to making a cordapp from the tests base
directory if none are provided.
* CORDA-3578 add corda prefix to conf file names as original issue was having non-corda reference.conf files on classpath causes DriverDSLImp failure
it is better to have this naming convention and avoid further conflicts of conf files.
* fixed weird duplicates
* revert renaming changes for web-reference.conf and loadtest-reference.conf
* CORDA-3755: Switched attachments map to a WeakHashMap (#6214)
* CORDA-3772: Now specify source and target of 8 when compiling contract classes.
* CORDA-3651: addManifest now uses separate files for reading and writing. (#6026)
* CORDA-3651: addManifest now uses separate files for reading and writing.
* CORDA-3651: The jar scanning loader now closes itsself.
Co-authored-by: Adel El-Beik <adelel-beik@19LDN-MAC108.local>
Co-authored-by: Adel El-Beik <adelel-beik@19LDN-MAC108.local>
Added command-line option: `--pause-all-flows` to the Node to control this.
This mode causes all checkpoints to be set to status PAUSED when the
state machine starts up (in StartMode.Safe mode).
Changed the state machine so that PAUSED checkpoints are loaded into
memory (the checkpoint is deserialised but the flow state is left serialised)
but not started.
Messages from peers are queued whilst the flow is paused and processed
once the flow is resumed.
* Bump OS release version 4.6
* CORDA-3755: Switched attachments map to a WeakHashMap
* CORDA-3755: Added explicit strong references to map key.
* CORDA-3755: Keeping detekt happy.
* CORDA-3755: Test a gc in verify.
* CORDA-3755: Making detekt happy.
* CORDA-3755: Suppress warnings for weak reference test.
* CORDA-3755: Fixing build failure with attachments.
* CORDA-3755: Rewrite based on Ricks input - now handles attachment already existing in map!
* CORDA-3755: Refactor WeakReference behaviour into AttachmentsHolderImpl and provide alternate version of this class for core-deterministic.
* CORDA-3755: Added more tests for WeakHashMap.
* CORDA-3755: Ignore the tests using System.gc keep for local testing only
* CORDA-3755: Adding comment to explain the ignored tests.
* Make AttachmentsHolderImpl package-private inside core-deterministic, just like it is inside core.
* CORDA-3755: Update assertions following review comments.
* CORDA-3755: Removing import
* CORDA-3755: Removed unused var.
* CORDA-3755: Reverting files that somehow got changed in rebase.
Co-authored-by: nargas-ritu <ritu.gupta@r3.com>
Co-authored-by: Chris Rankin <chris.rankin@r3.com>
The new flow sleep made `NotaryWhitelistTests` flaky which highlighted
an issue with the change to how a flow sleeps. Messages were being
pumped while the flow was sleeping which lead to inconsistent behaviour.
Messages are no longer pumped while a flow sleeps.
* CORDA-3722 withEntityManager can rollback its session
## Summary
Improve the handling of database transactions when using
`withEntityManager` inside a flow.
Extra changes have been included to improve the safety and
correctness of Corda around handling database transactions.
This focuses on allowing flows to catch errors that occur inside an
entity manager and handle them accordingly.
Errors can be caught in two places:
- Inside `withEntityManager`
- Outside `withEntityManager`
Further changes have been included to ensure that transactions are
rolled back correctly.
## Catching errors inside `withEntityManager`
Errors caught inside `withEntityManager` require the flow to manually
`flush` the current session (the entity manager's individual session).
By manually flushing the session, a `try-catch` block can be placed
around the `flush` call, allowing possible exceptions to be caught.
Once an error is thrown from a call to `flush`, it is no longer possible
to use the same entity manager to trigger any database operations. The
only possible option is to rollback the changes from that session.
The flow can continue executing updates within the same session but they
will never be committed. What happens in this situation should be handled
by the flow. Explicitly restricting the scenario requires a lot of effort
and code. Instead, we should rely on the developer to control complex
workflows.
To continue updating the database after an error like this occurs, a new
`withEntityManager` block should be used (after catching the previous
error).
## Catching errors outside `withEntityManager`
Exceptions can be caught around `withEntityManager` blocks. This allows
errors to be handled in the same way as stated above, except the need to
manually `flush` the session is removed. `withEntityManager` will
automatically `flush` a session if it has not been marked for rollback
due to an earlier error.
A `try-catch` can then be placed around the whole of the
`withEntityManager` block, allowing the error to be caught while not
committing any changes to the underlying database transaction.
## Savepoints / Transactionality
To make `withEntityManager` blocks work like mini database transactions,
save points have been utilised. A new savepoint is created when opening
a `withEntityManager` block (along with a new session). It is then used
as a reference point to rollback to if the session errors and needs to
roll back. The savepoint is then released (independently from
completing successfully or failing).
Using save points means, that either all the statements inside the
entity manager are executed, or none of them are.
## Some implementation details
- A new session is created every time an entity manager is requested,
but this does not replace the flow's main underlying database session.
- `CordaPersistence.transaction` can now determine whether it needs
to execute its extra error handling code. This is needed to allow errors
escape `withEntityManager` blocks while allowing some of our exception
handling around subscribers (in `NodeVaultService`) to continue to work.
* CORDA-3762: Integration test exposing the problem reported
* CORDA-3726: Additional logging
* CORDA-3726: Prevent thread leaks
* CORDA-3726: New `journalBufferTimeout` parameter
* CORDA-3726: Override `journalBufferTimeout` parameter
* CORDA-3726: Making Detekt happier
* CORDA-3276: Account for extra thread user in MockNetwork
For real node this does not matter as `shutdown` can safely be called multiple times, which is not true for server thread provided by MockNetwork
* CORDA-3276: Do not make SMM shutdown "executor" as it belongs to AbstractNode
* CORDA-3276: Address input from @rick-r3
* CORDA-3276: Fix test after rebase
* [EG-503] Spent state audit tool
Fixes
* Refinements to notary query interfaces. Feature complete.
* EG-503: Introduce optional `notaryService` in `ServiceHubCoreInternal`
* Remove redundant logic following change to use extensions API
Co-authored-by: Viktor Kolomeyko <viktor.kolomeyko@r3.com>
* CORDA-3696: Temporary update to enable JDK11 build and test. Will eventually be switchable.
* CORDA-3696: Filter out the Nashorn warning.
* CORDA-3696: Add JDK11 classifier.
* CORDA-3696: Updated match string to cope with JDK11.
* CORDA-3696: Filtering out SPHINCS256_SHA256 where failing due to JDK11.
* CORDA-3696: Now remove SPHINCS256_SHA256 only if JDK11.
* CORDA-3696: Fix test failure - switch to regex matching.
* CORDA-3696: Hide the illegal access warnings.
* CORDA-3696: Check for Java11 when disabling Java11 warnings.
* CORDA-3696: Fix unneccessary non null check.
* CORDA-3696: Reverting build env to JDK8
* CORDA-3696: Revert hiding of illegal access warnings via Unsafe class.
* CORDA-3696: Remove internal access warnings and new JDK11 version checker.
* CORDA-3696: Updated build file for OS
* CORDA-3696: Removed typo
* CORDA-3696: Fixed space typo.
* CORDA-3696: Open modules to remove the illegal access warnings.
Co-authored-by: Adel El-Beik <adelel-beik@19LDN-MAC108.local>
* Run serialisation tests with both in-process and out-of-process nodes.
* Add custom serialisers and whitelists to Driver's AMQPServerSerializationScheme.
* Run serialisation tests with both in-process and out-of-process nodes.
* Add custom serialisers and whitelists to Driver's AMQPServerSerializationScheme.
When a flow is finished do not delete the checkpoint from the DB.
Instead, the FlowStatus is marked as Completed in the DB.
Updated numerous tests which relied on the flow being removed
when finished.
* CORDA-3651: addManifest now uses separate files for reading and writing.
* CORDA-3651: The jar scanning loader now closes itsself.
Co-authored-by: Adel El-Beik <adelel-beik@19LDN-MAC108.local>
