* Fix BFT config that only worked with clusters of size 4
* Shutdown BFT properly so that tests can run back to back in theory
* Wait for initial connection between client and all replicas before touching it
* Add test for non-trivial BFT cluster
* Shutdown NodeBasedTest nodes in parallel, as BFT shutdown time is non-trivial
* Overlapping ports check no longer assumes all on localhost
* Fix overlapping ports test to actually check the messages
* Remove unused type param
* If we drop Runnable we can use conciser syntax
* Sometimes we need the fully-fledged object, so retire separate handle class
* Implement IntelliJ suggestion
Fix bug in network simulator. It failed on cast when requesting signatures from notary, now it's not a SingleMessageRecipient but InMemoryMessagingNetwork.ServiceHandle.
Clean up cash tests ahead of anonymisation work. This simplifies some boiler plate setup/teardown
and ensures idenities and flows are correctly registered.
Core corda publications and JARs now have cord or corda at the start (excluding gradle plugins). Removed an unnecessary dependency on test-utils in node-schemas to prevent an evaluation order bug in gradle.
Change PartyAndCertificate to an aggregate class instead of a subclass of Party. This reduces the changes compared to M11, as well as avoiding risk of accidental serialization of a PartyAndCertificate (which may be very large) where a Party is expected.
Cleaned up initial nodes known to the identity service, in particular mock nodes now know about themselves; previously full nodes registered themselves but mock nodes did not.
* Specifically, DriverTests and WebserverDriverTests
* RPCDriver.startRpcBroker now waits for port to be unbound, as was probably intended
* Explicitly drop network map future while ensuring the error is logged
* Fix bug in demobench. Explorer didn't show correctly location of a node.
There was no nearestCity override in config.
* Remove nearestCity from node configuration. Now information about the location is always taken from
node's legal name. If not present - exception on node startup.
* Add X500Name.locationOrNull that soft fails when location is not in X500 name. Address PR comments.
* Remove unused imports.
* Construct standard flows using PartyAndCertificate, and add support for launching
flows that are constructed with PartyAndCertificate or just Party.
* Store PartyAndCertificate in network map service
* Expand identity service to store certificates along with all identities.
This removes the need to do manual registration using the PluginServiceHub. As a result CordaPluginRegistry.servicePlugins is no longer needed. For oracles and services there is a CorDappService annotation.
I've also fixed the InitiatingFlow annotation such that client flows can be customised (sub-typed) without it breaking the flow sessions.
Replace X509Certificate with X509CertificateHolder for consistency in implementation of how X.509 certificates
are managed. Using the Java standard class entails the actual implementing class being one of several options
depending how a certificate is built, which makes serialization/deserialization with Kryo inconsistent as some
of these forms cannot be directly built from outside restricted classes.
* De-anonymise parties in AbstractStateReplacementFlow flows
* Convert transaction key negotiation to a subflow instead of utility functions
* Add serialization support for CertPath
* Restructure cash flows so that a counterparty flow can be added later
* Rename raft-notary-demo project to notary-demo
* Refactor serialisation filtering to allow BFT SMaRt to work, it no longer relies on the jdk.serialFilter system property
* In NodeBasedTest remove whitespace in node directory names for consistency with cordform and driver
Remove mock identity service and merge it with the in memory identity service. The two services
provide extremely similar functionality, and having two different version for production/test
risks subtle implementation differences. On that note, this patch includes changes to a number
of tests which worked only with mock identity service.
Fixup after rebase
Restore original key property names
Fixup after rebase
Undo extra import that IntelliJ keeps erroneously adding.
Add comments and fix docs for transaction signing.
Fixes after rebase
More fixes after rebase
Address PR requests
Address PR requests
Switch to using AbstractParty as the standard identifier for parties in
states, so that full parties can be used during construction of
transactions and anonymised parties when the transaction is being added
to the ledger.
* Fix: Add missing @StartableByRPC to fix the Raft notary demo
* Make loadConfig take a Config object, for cordformation Node
* Unduplicate User.toMap
* Unduplicate WHITESPACE regex, choose possessive form
* Use slash to make a Path
* Remove Companion where redundant
* Remove unused code
Specifically, make the IDE/driver and gradle/NodeRunner methods of launching the demo behave more similarly, with a view to configuring them the same way.
* Add option to driver to nominate a node as network map, so that the driver-based demo doesn't run an additional node
* Change gradle ports to match those chosen by driver
Add functionality for generating certificate paths from identity
certificates to transaction certificates, validating, storing and
retrieving those certificate paths.
Move AbstractParty, AnonymousParty and Party into a new net.corda.core.identity package,
as they're not really cryptography tools, and in preparation for further code coming in
for identity.
Optimize imports on many files to clean up the resulting refactor.
Change the legal name of parties to be an X500 name. This ensures that we aren't converting between
common names and X500 names in various places, eliminating substantial scope for error in the conversion
process. As a result, all node names must now be full X500 names, which has impact on most configurations.
Clean up X500 names in Corda simulation, and ensure they're consistent with the standard test names.
This includes using the locations present in those test names, which requires updates to the node
config test.
This is an intermediary step to introducing X500Names in all Party instances, which adds:
* Party constructor which accepts X500Name and then converts it to string.
* startNode() function which takes in X500Name instead of String
* Numerous legal name fixes to use full distinguished names
Core flows, which are baked into the platform, are also versioned using the platform version of the node. Several core flows, such as the data vending ones, which were provided via plugins are now instead baked into the node.
* Add information on why state machine was removed from StateMachineManager.
There are two cases: normal end of flow or error.
Return flow result as part of state machine remove data.
Make Change a sealed class with Add and Remove.
fiber.actionOnEnd takes ErrorOr<R> parameter.
* Remove unnecessary fields from StateMachineManager.Change.
* Add information on who started flow on a node with name where possible.
Add sealed class holding information on different ways of starting a flow: RPC, peer, shell, scheduled.
* Remove invokeFlowAsync from ServiceHub, move it to ServiceHubInternal.
We shouldn't be able to start new state machines from inside flows.
This introduces new functions for fetching parties by their X.500 name, Kryo serialization support for X500Name objects, an X500Name generator and some X509 utility support in preparation for full X.500 name support.
Standaridise the identity names of Alice, Bob and Charlie, notary, map service, etc. in order
to ensure consistency across the code base and reduce number of places that have to be changed
to introduce proper X.500 names.
Move Alice, Bob & Charlie identities into the utilities package so they can be used in demos
* Make CompositeKey implement PublicKey
The initial implementation of composite keys as their own distinct class separate from PublicKey
means that the keys cannot be used on standard classes such as Certificate. This work is a beginning
to modifying CompositeKey to being a PublicKey implementation, although significant further work
is required to integrate this properly with the standard Java APIs, especially around verifying
signatures using the new key type.
* First stage of making CompositeKey implement PublicKey interface. Revert to using PublicKey everywhere we expect a key.
* Move algorithm and format into companion object (#432)
Move algorithm and format into companion object so that they can be referenced from other
classes (i.e. the upcoming signature class).
* Add simple invariants to construction of CompositeKey.
Builder emits CompositeKeys in simplified normalised form. Forbid keys with single child node, force ordering on children and forbid duplicates on the same level. It's not full semantical normalisation.
* Make constructor of CompositeKey private, move NodeWeight inside the class.
Add utility function for Kryo deserialization to read list with length constraints.
Fix broken IssuerFlowTest
Fix IssuerFlowTests after rebase.
Resolve conflicts after rebase.
Soft locking converted to use persistent store.
Added additional optional 'includeLockStates' parameter in VaultService states API call.
Added Vault softLocked states query API call.
Fixed commercial paper failing test.
Improved exception handling on soft locking UPDATE statement.
Using SELECT FOR UPDATE to ensure correct soft locking data visibility.
Db query operations moved out of mutex code (as locking managed by underlying DB)
Adjusted logging severity levels.
Adjusted logging severity levels.
GenerateSpending now performing fine grained query for unconsumed states by joining with contract_cash_states table.
Using H2 proprietary cummulative counting feature (using sessioni SET variables)
Refactored and simplified HibernateObserver constructor to enable usage in JUnit tests.
Event generator issues larger random amounts (10,000..1,000,000) to those than are spent (0..10,000)
Adjusted Issue (5:1) and Exit (10:1) generation frequency vs spending.
Minor fixes: added optional lockid into select for spending criteria, set notary, additional trace logging.
Generate Cash Schema by default upon node start-up (as part of NodeSchemaService initialisation).
Explicitly close JDBC statements in finally() blocks.
Tightened HibernateObserver constructor.
Fix CommercialPaper test (was missing auto-generation of CONTRACT_CASH table)
Revert default JVM size back to 200Mb.
Revert default number of iterations in Explorer Node Simulation mode (back to 10000 with .5 sec sleep interval).
Remove redundant setter function.
Added TODO messages indicating Requery / H2 restrictions & caveats.
Consumed states lock updates now performed in general consumed state Update.
Updated/added Soft Locking documentation.
Addressed initial PR comments: use THREAD_LOCAL_KRYO, use AbstractParty, extract helper method, improve readability, address some doc typos
Addressed PR comment: removed lockId from WireTransaction.
Fixed soft locking UPDATE statements.
Improvements to VaultSoftLockManager for auto-registration of soft locks for flows with spendable states (as notifications from vault).
Other optimisations (IssuerFlow no longer explicitly reserve/release issued state) and improvements (soft lock release management of soft locks, docs update)
Performance update: now using Requery for UPDATE in release soft locking (non-composite key statement)
Removed redundant TODO messages (TODO: revisit Kryo bug when using THREAD_LOCAL_KYRO)
Minor fixes following rebase
Fixed failing JUnit following rebase
Addressed MH PR review items (1st pass)
Fix broken JUnit
Significant changes to RDBMS operations within coin selection and soft locking as requested by PR review.
(Removed SELECT FOR UPDATE; added RETRY upon coin selection; reverting partial soft locks)
Addressed a number of PR review requests added by MH (comments/spelling, lockID instantiation, HibernateObserver instantiation, cash schema white-listing usage)
Addressed latest PR review comments from RP.
Minor fixes following rebase from master.
Fixed final failing JUnit (issuer flow concurrent).
Updated TraderDemo to trigger concurrent issuance of cash.
Fixed compiler warning on lockId null check.
Fixed subtle bug in coin selection intermittently surfaced in IntegrationTestTutorial.
Fixed small memory leak.
Removed stray } in logger trace message.
Slight rewording of description of Soft Locking in docs.
Renamed NoStatesAvailableException to StatesNotAvailableException.
generateSpend is now Suspendable (calls sleep method on flow upon coin selection retry).
Added companion function to enable a Strand to sleep but without locking transactional context.
Improved logging, changed to StateNotAvailableException, using Flow sleep upon retry, tweaked SELECT criteria in coin selection, fixed bug when insufficient states selectable, generateSpend is now @suspendable
Improved handling and logging of flow results in Simulation Mode.
Fixed minor error in sleep when not an active flow.
Retry coin selection when unavailable states (as these may become available as new states).
Additional debug logging to highlight and identify H2 coin selection sporadic bug.
Inlined sleep method due to intermittent Quasar error.
Re-introduce selection clause that prevents selection and temporary locking of already locked states (by other flows).
Improved trace logging for coin selection (SQL row level info).
Correctly calling FlowStateMachineImpl sleep (now inlined and working correctly)
Fixed rebase error.
Remove redundant TODO message.
* CORDA-305: Refactor CordaRPCClient into :client:rpc module
* CORDA-305: Remove the Kotlin test framework from the artifacts.
* CORDA-305: Migrate serialisation whitelist into node-api module.
* CORDA-305: Clean up unused RPC observables.
* CORDA-305: Add :client:rpc module to documentation tasks.
* CORDA-305: Include :finance into :client:rpc for its serialisable classes.
* CORDA-305: Move test classes into the correct directory.
* CORDA-305: Migrate :finance dependency from :client:rpc into DemoBench.
* CORDA-305: Update wording of TODO about handling Observables.
* CORDA-304: Refactor :client modules into :client:javafx and :client:mock.
* CORDA-304: Add :client:mock to Dokka tasks, and remove unused integrationTest task.
* CORDA-304: Migrate DriverBasedTest from node into test-utils.
* CORDA-304: Rename .fx. package to .jfx. to prevent confusion with "exchange rate".
* CORDA-304: Rename module to ':client:jfx'.
* Non-ssl artemis acceptor for RPC connection. (#271)
* New non-ssl acceptor in artemis server for RPC connection.
* Rename artemisAddress with messagingAddress
Rename artemisAddress with messagingAddress so that the node configuration file properties match
the code variable names.
Rename artemisPort to messagingPort in Gradle configuration to match node configuration naming.
* Add rpcPort configuration option for Gradle
* Update docs to reflect changes to RPC port configuration
* Renumber ports in example CorDapp to match numbering used elsewhere
* Restructure upgrade guide
* added config file checks on corda startup to make the upgrade path a bit smoother.
* Make the network registration process more verbose
* removed gradle task for building standalone jar for the certificate signing request utility
* Added a flag "--initial-registration" to the corda jar to start the registration
* Initial prototyping with Requery as a persistence replacement for Exposed/Hibernate
Applied changes following PR review by RP
Updated timestamp naming (removed committedTimestamp) and StateStatus (removed AWAITING_CONSENSUS) after discussion with RP.
Removed FungibleState and LinearState schemas (and associated tests) - awaiting Requery uni-directional relationship fix.
Added Transaction propagation such that requery re-uses any existing transaction context.
Made requery default logging configurable (disabled by default)
Nullable fields are now truly nullable (in the Kotlin and DDL sense)
Fix for SimmValuation integration test.
Workarounds applied to resolve Requery issues when sharing Transactional context.
Addressed PR review comments from MH.
Further updates following re-review by RP/MH
Further updates following additional PR review comments by RP
Minor update following additional PR review comments by RP
Optimised makeUpdate state processing code.
Resolved conflicts after rebase.
Additional Unit tests and bug fix for correct spending of multiple contract state types within a single transaction.
Required interface change to states() API to take a setOf (ContractStateClassTypes)
Minor code clean-up.
Re-write NodeVaultService consumed state makeUpdate function using SQL.
* Resolve conflict after rebase from master
Add AnonymousParty superclass of Party in preparation for anonymising parties stored in
contract states.
Signed-off-by: Ross Nicoll <ross.nicoll@r3.com>
Change Party instances to be uniquely identified by the owning key, without taking into account name.
This requires that mock node key generation is reworked so that keys for services and the node itself
are distinct, otherwise the network map service cannot differentiate them.
Signed-off-by: Ross Nicoll <ross.nicoll@r3.com>
Remove TransferRecipient from StateMachineManagerTests to get rid one of the approximately 6 different ways
in which we refer to endpoints, as part of work to simplify this data model.
Signed-off-by: Ross Nicoll <ross.nicoll@r3.com>
* Update notary change flow to support encumbrances.
Move encumbrance pointer from ContractState to TransactionState.
* Refactor & add new encumbrance tests
Initial conversion of Explorer to use IssuerFlow (from BankOfCorda)
Initial conversion of TraderDemo to use IssuerFlow (from BankOfCorda)
Updated TraderDemo to use IssuerFlow (from BankOfCorda)
Fixed TraderDemo integration text (added new BankOfCorda node)
Updated Explorer with changes IssuerRequest params
Explorer now correctly displaying transaction id upon Issue.
Moved IssuerFlow into finance package so can be reused across multiple demos (TraderDemo) and applications (eg Explorer)
Refactored BankOfCorda demo to use Finance package and TestUtil constants
Updated TraderDemo to use IssuerFlow
Updated Explorer to use finance package IssuerFlow.
Advertised BankOfCorda as Issuer for usage by Explorer.
Explorer no longer depends on BankOfCorda demo since IssuerFlow promoted to Finance module
Added IssuerFlow to AbstractNode whitelist.
Explicit declarations of IssuerFlow no longer required.
Added plugin registration of IssuerFlow at bootstrap.
Revert whitelisting of IssuerFlow (plugin configured)
Refactored to use constant BOC definition.
Added gradle RPC security config.
Updated documentation
Fixed incorrect references.
Renamed Issuer banks.
Added new permission set (for Issuer nodes)
Added node nearestCity info
Added new Issuer Event Generator for Issuer nodes only
Associated currency with issuer using ServiceType naming structure.
Added argument flag (-S) to trigger event generator simulation node.
Fixed problem with issuers not resolving from network map.
Updated perms on Issuer rpc proxy nodes.
Fixed minor in cash generateExit identified by Explorer.
Changes applied in prep for AWG demo.
Added IntelliJ run-configurations for launching Explorer demo nodes (with and without simulation)
Updated documentation (and added additional gradle task to launch Explorer nodes in simulation mode).
Fix following rebase.
Addressed review items from PR.
Updated TraderDemo readme.
Updated TraderDemo gradle file to launch Bank of Corda node.
Updated JRE properties.
Updated IssuerModel to incorporate correct JFX Observable handling.
Fixed bug with Exit command not displaying any currency.
Added TODO's for revisiting correct Exception handling strategy.
Optimization for when issuing cash to self.
Minor updates following PR review.
Remove old refs to Royal Mint and Federal Reserve
Add unit tests of ScheduledFlow running on simulated network.
Just use existing DumyContract in test
DummyContract requires value equality so that assertEquals over states works as expected.
Remove blank line.
Add TODO on waitQuiescent.
Fix minor build error
