* ENT-11728: Switched to LTS version of BC. Also removed PQC algos as not supported in LTS.
* ENT-11728: Removed the SPHINCS PQC algorithm.
* ENT-11728: Added dependency on bcutil to fix missing class error.
This is code refactoring and cleanup that is required to add a new WireTransaction component group for 4.12+ attachments, and for supporting legacy (4.11 or older) contract CorDapps in the node.
The node now sends a transaction to the verifier if any of its attachments were compiled with Kotlin 1.2 (the net.corda.node.verification.external system property has been removed). It uses kotlinx-metadata to read the Kotlin metadata in the attachment to determine this. For now this scanning is done each time the attachment is loaded from the database.
The existing external verification integration tests were converted into smoke tests so that 4.11 nodes could be involved. This required various improvements to NodeProcess.Factory. A new JAVA_8_HOME environment variable, pointing to JDK 8, is required to run these tests.
There is still some follow-up work that needs to be done:
Sending transactions from a 4.11 node to a 4.12 node works, but not the other way round. A new WireTransaction component group needs to be introduced for storing 4.12 attachments so that they can be safely ignored by 4.11 nodes, and the 4.12 node needs to be able to load both 4.11 and 4.12 versions of the same contracts CorDapp so that they can be both attached to the transaction.
Even though attachments are cached when retrieved from the database, the Kotlin metadata version should be stored in the attachments db table, rather than being scanned each time.
Finally, VerificationService was refactored into NodeVerificationSupport and can be passed into SignedTransaction.verifyInternal, instead of needing the much heavier VerifyingServiceHub. This makes it easier for internal tools to verify transactions and spawn the verifier if necessary.
* ENT-11055: Basic external verification
Introduction of the external transaction verifier, a separate JVM process for verifying `SignedTransaction`s. The end goal is for this verifier to be built with Kotlin 1.2 so that it creates a compatible verification environment for transactions with 4.11 contracts. For now however the verifier is built against Kotlin 1.8, same as the node.
External verification is enabled when the the system property `net.corda.node.verification.external` is set to `true`. When enabled, all verification requests made via `SignedTransaction.verify` are sent to the external verifier, regardless of the transaction content. It will do the vast bulk of the verification and then send the result back, namely if an exception occurred. If it did, then it's re-thrown in the node.
The external verifier is a stateless process, with no connection to the node's database. All transaction resolution information needed to create the relevant ledger transaction object are made to the node, which waits in a loop servicing these requests until it receives the result. The verifier Jar is embedded in the Corda node Jar, and is extracted and run when needed for the first time. The node opens up a local port for the verifier to communicate with, which is specified to the verifier in the process command line. This all means there is no extra configuration or deployment required to support external verification.
The existing code had some initial attempts and abstractions to support a future external verification feature. However,
they were either incorrect or didn't quite fit. One such example was `TransactionVerifierService`. It incorrectly operated on the `LedgerTransaction` level, which doesn't work since the transaction needs to be first serialised. Instead a new abstraction, `VerificationSupport` has been introduced, which represents all the operations needed to resolve and verify a `SignedTransaction`, essentially replacing `ServicesForResolution` (a lot of the changes are due to this). The external verifier implements this with a simple RPC mechanism, whilst the node needed a new (internal) `ServiceHub` abstraction, `VerifyingServiceHub`. `ServicesForResolution` hasn't been deleted since it's public API, however all classes implementing it must also implement `VerifyingServiceHub`. This is possible to do without breaking compatibility since `ServicesForResolution` is annotated with `@DoNotImplement`.
Changes to `api-current.txt` were made due to the removal of `TransactionVerifierService`, which was clearly indicated as an internal class, and returning `TransactionBuilder.toLedgerTransactionWithContext` back to an internal method.
* Address review comments
* One bulk load states method
* Merge fix
Major changes due to JDK 17:
1. JDK17 JCE Provider now has built-in support for eddsas, corda uses
the bouncycastle (i2p) implementation. This PR removes the conflicting
algorithms from the built-in JCE provider.
2. JavaScript scripting has been removed from the JDK, the corda log4j config was using
scripting to conditionally output additional diagnostic info if the MDC
was populated. This PR has removed the scripting.
3. The artifactory plug-ins used are now deprecated, this PR has removed them
and uses the same code as Corda 5 for publishing to artifactory.
4. Javadoc generation has been modified to use the latest dokka plug-ins.
5. Gradle 7.6 has implemented an incredibly annoying change where transitive
dependencies are not put on the compile classpath, so that they have to be
explicitly added as dependencies to projects.
6. Mockito has been updated, which sadly meant that quite a few source files
have to changes to use the new (org.mockito.kotlin) package name. This makes
this PR appear much larger than it is.
7. A number of tests have been marked as ignored to get a green, broadly they fall
into 3 classes.
The first is related to crypto keypair tests, it appears some logic
in the JDK prefers to use the SunJCE implementation and we prefer to use
bouncycastle. I believe this issue can be fixed with better test setup.
The second group is related to our use of a method called "uncheckedCast(..)",
the purpose of this method was to get rid of the annoying unchecked cast compiler
warning that would otherwise exist. It looks like the Kotlin 1.9 compiler type
inference differs and at runtime sometimes the type it infers is "Void" which causes
an exception at runtime. The simplest solution is to use an explicit cast instead of
unchecked cast, Corda 5 have removed unchecked cast from their codebase.
The third class are a number of ActiveMQ tests which appear to have a memory leak somewhere.
* wip
* wip
* wip (need to review IEE comments)
* wip
* wip
* Small refactoring, fixed network-verifier's TestNotaryFlow
* Added command line option to explicitly enable hash agility support
* wip-do-not-push
* wip
* wip
* wip
* aligned merkletree/transaction hash algorithms
* wip
* Added mixed algorithm support for nodes vs leaves and corrected mixed algorithm tests
* moved global computeNonce and componentHash to DigestService
* added comment for failing test to fix
* wip
* Minor cleanups, added deprecated componentHash/computeNonce
* restored exploratory changes to failing SignedTransaction test
* cleaned up and minor rafactoring
* Fixed some tests with hardcoded hash algorithm
* some changes and cleanups following code review
* WIP commit before large change
* WIP Fixed 3 tests
* WIP removed direct references to randomSHA256() and sha256()
* Updated/added liquibase migrations to support larger hash algorithms
* Reviewed, cleanups, comments, fixes
* removing direct references to sha256()
* WIP verifying obligations test errors
* reviewing obligation/attachment issues with sha3_256
* Full review before PR - intermediate commits
* Reviewed and cleaned up
* Futher cleanup
* Fixed partial tree backward compatible json and cleanups
* all tests passing
* Removed couple of unused imports
* Reworked global componentHash function to avoid deprecated warnings
* replaced SHA3s with some alternate SHA2s
* Removed SHA3-256 and SHA3-512 references
* fixed some tests using non ubiquitous hash algorithms
* Fixed ABI compatibility (not for TransactionBuilder)
* Fixed ABI compatibility to TransactionBuilder
* couple of fixes
* fixed DigestService's randomHash
* Removed constructor with loosely typed args for private constructor of LedgerTransaction class (API removal)
* re-introduced LedgerTransaction deprecated ctor for deserialization
* Add possibility to load CustomMessageDigest bypassing JCA (#6798)
* Change api-current for DigestAlgorithm
* disable flaky tests
Co-authored-by: Denis Rekalov <denis.rekalov@r3.com>
* INFRA-424 linux1 jenkinsfile
* INFRA-424 full run
* INFRA-424 bigger heap size
* Upgraded DJVM to handle BC - latest version of BC is a multirelease JAR.
When reading JKS keystore if a BC EdDSAPrivateKey is returned then swap for a net.i2p EdDSA private key.
* Temporary downgrade of BC
* Removed the BC EdDSA conversion
* INFRA-424 bigger heap size
* Upgrading Quasar to handle openJ9 different fields.
* INFRA-424: Handle lack of SUPPRESSED_SENTINEL in openj9.
* INFRA-424: If BCEdDSA public or private key is generated convert to net.i2p EdDSA form.
* INFRA-424 bigger heap size
* INFRA-424: On openJ9 only getting upto milli resolution.
* INFRA-424: Handle keystore returning a BCEdDSAPrivateKey.
* INFRA-424: Disable test on JDK11, as it requires the custom cordapp to generate JDK8 contract code, which we now check for.
* INFRA-424: Truncated time test to resolution of millis for openj9.
* INFRA-424 disabling log intensive tests until a fix is developed
* INFRA-424 one more test disabled
* INFRA-424: Disabled a couple of tests failing on openj9.
* INFRA-424: Disabling failing openj9 tests.
* INFRA-424: Disabling test failing on openj9.
* INFRA-424: Ignoring another flaky sleep test on openj9.
* INFRA-424 run integrationTests
* INFRA-424 set timeout to 4 hours
* INFRA-424: Cope with exception message from openj9.
* INFRA-424: Handle the coloured text characters openj9 adds.
* INFRA-424: Disabling test as it is generating JDK11 contract code under JDK11. Currently on JDK8 contract code allowed.
* INFRA-424: Commenting test out for openj9. Output of the processs thats read by the test is sometimes garbled.
* INFRA-424 switching to smoke tests
* INFRA-424 switching to slow integration tests
* INFRA-424 full run
* INFRA-424 moving jenkinsfile
* INFRA-424 removing references
* INFRA-424: Created common IS_OPENJ9 func for ignoring tests.
Co-authored-by: Schife <razvan.codreanu@r3.com>
* CORDA-3769: Switched attachments class loader cache to use caffeine with original implementation used by determinstic core.
* CORDA-3769: Removed default ctor arguments.
* CORDA-3769: Switched mapping function to Function type to avoid synthetic method being generated.
* CORDA-3769: Now using a cache created from NamedCacheFactory for the attachments class loader cache.
* CORDA-3769: Making detekt happy.
* CORDA-3769: The finality tests now check for UntrustedAttachmentsException which will actually happen in reality.
* CORDA-3769: Refactored after review comments.
* CORDA-3769: Removed the AttachmentsClassLoaderSimpleCacheImpl as DJVM does not need it. Also updated due to review comments.
* CORDA-3769: Removed the generic parameters from AttachmentsClassLoader.
* CORDA-3769: Removed unused imports.
* CORDA-3769: Updates from review comments.
* CORDA-3769: Updated following review comments. MigrationServicesForResolution now uses cache factory. Ctor updated for AttachmentsClassLoaderSimpleCacheImpl.
* CORDA-3769: Reduced max class loader cache size
* CORDA-3769: Fixed the attachments class loader cache size to a fixed default
* CORDA-3769: Switched attachments class loader size to be reduced by fixed value.
Removing the ability to initialise schema from the node config, and add a new sub-command to initialise the schema (that does not do anything else and exits afterwards).
Also adding a command line flag that allow app schema to be maintained by hibernate for legacy cordapps, tests or rapid development.
Patching up mock net and driver test frameworks so they create the required schemas for tests to work, defaulting schema migration and hibernate schema management to true to match pre-existing behaviour.
Modified network bootstrapper to run an initial schema set-up so it can register nodes.
* [EG-503] Spent state audit tool
Fixes
* Refinements to notary query interfaces. Feature complete.
* EG-503: Introduce optional `notaryService` in `ServiceHubCoreInternal`
* Remove redundant logic following change to use extensions API
Co-authored-by: Viktor Kolomeyko <viktor.kolomeyko@r3.com>
* CORDA-3651: addManifest now uses separate files for reading and writing.
* CORDA-3651: The jar scanning loader now closes itsself.
Co-authored-by: Adel El-Beik <adelel-beik@19LDN-MAC108.local>
* Split out node-api tests that require test-utils/node-driver
* Add node-api test artefacts to publication list.
* Make test-common a transient dependency - downstream tests assume that it's available.
* Switch dependencies to java-library
* Fix magic package name for cordapp scanning in test
* Remove unused dependencies from test-common
* Explicit imports and formatting
* Add core-test-utils project
* Add dependency
* Move Kryo serialization context to node-api (not serialization as we do not want to pull kryo into the serialization lib)
* Move AMQP server serialization scheme to node api
* Move serialization tests to node-api
* Move internal test helpers without further dependencies.
* Move out some types from RPCClientProxyHandler to node-api in preparation for moving the AMQP scheme
* Move client AMQP context to node-api so we can move the test serialization rule out.
* Move InternalSerializationTestHelpers to core-test-utils
* Moved testing.core to core-test-utils
* Make detekt happy
* Add api-scanner to core-test-utils
* Remove inlined package names introduced by IntelliJ refactoring
* Update api-current.txt to account for reordering.
* Add core-test-utils to list of published artifacts.
* Add missing import
* Location of things in api text has moved again (publish name of artefact?)
* Revert all additions to the API, leaving just the reordering
* Code review: fix up core-test-utils build.gradle and introduce kryo version constant.
* Remove OpenSsl flag from ssl config stub (can't be used from node-api)
* Suppress detekt warning
* Move core test util tests to the right module
* Expose kotlin test as a transient dependency - projects have come to rely on that.
* Fix typo in package name
Deprecate FlowAsyncOperation and reimplement public versions FlowExternalOperation and FlowExternalAsyncOperation.
await added to FlowLogic to allow easy calling from both Java and Kotlin. There are two overrides of await (one for FlowExternalOperation and FlowExternalAsyncOperation).
Implementations of FlowExternalOperation return a result (written as blocking code) from their execute function. This operation will then be executed using a thread provided by the externalOperationExecutor.
Implementations of FlowExternalAsyncOperation return a future from their execute function. This operation must be executed on a newly spawned thread or one provided by a thread pool. It is up to developers to handle threading in this scenario.
The default thread pool (externalOperationExecutor) can be configured through the flowExternalOperationThreadPoolSize node config.
The current implementation leaves FlowAsyncOperation alone, meaning that any developers that have used it (even though it is internal) won't need to change their apps. If this was not concern I would delete it completely and replumb the state machine code. Instead, it has been marked with @DoNotImplement and executeAsync is annotated with @Deprecated
* CORDA-3464: Also scan attachment:// URLs for custom serializers.
* Only scan the given classloader - ignore this classloader's parents.
* Upgrade to ClassGraph 4.8.58 - for "robustness fixes".
* Register the attachment:// URL scheme using AttachmentsClassLoader.
* Add integration test for custom serializer in contract state.
* Rename Currancy -> Currantsy, just to make the point.
* CORDA-3350: Increase size of constraints column (#5639)
* Detekt
* Update api file with new threshold
* Add check in transaction builder
* Revert "Add check in transaction builder"
This reverts commit ca3128f44c.
* Add check for max number of keys
* Update api file
* Address Tudor's comments
* Remove check for pre-5 and add test for EC keys
* fix typo and rename liquibase script
* updated docs with measurement numbers for composite keys
* Make detekt happy again
* Generalise participant parsing code & additional test cases.
* Use a common predicate to expand the participants query (when specified more than once - eg. in fungible and linear query criteria).
* Introduce some re-usable functions.
* Additional code clean-up and improvements.
* Fix detekt MaxLineLength errors.
Allow node operators to blacklist signing keys (using blacklistedAttachmentSigningKeys config option). These blacklisted keys prevent attachments that are received over the network from being trusted. The docs have been updated to detail how to generate the key hashes that the config requires.
A new shell command attachments trustRoots has been added to see what attachments exist on the node along with information about their trust and where it comes from.
run dumpCheckpoints has been replaced by checkpoints dump as InternalCordaRPCOps needed to change to prevent a function that is meant to be internal from being visible on the shell.
* Split integration tests
* add simple example of printing all methods annotated with @Test
* add docker plugin to root project
remove docker plugin from child projects
add Dockerfile for image to use when testing
add task to build testing image to root project
* add comment describing proposed testing workflow
* simple attempt at running tests in docker container
* add my first k8s interaction script
* add fabric8 as dependnency to buildSrc
* before adding classpath
* collect reports from containers and run through testReports
* re-enable kubes backed testing
* for each project
1. add a list tests task
2. use this list tests task to modify the included tests
3. add a parallel version of the test task
* tweak logic for downloading test report XML files
* use output of parallel testing tasks in report tasks to determine build resultCode
* prepare for jenkins test
* prepare for jenkins test
* make docker reg password system property
* add logging to print out docker reg creds
* enable docker build
* fix gradle build file
* gather xml files into root project
* change log level for gradle modification
* stop printing gradle docker push passwd
* tidy up report generation
* fix compilation errors
* split signature constraints test into two
* change Sig constraint tests type hierarchy
* tidy up build.gradle
* try method based test includes
* add unit test for test listing
* fix bug with test slicing
* stop filtering ignored tests to make the numbers match existing runs
* change log level to ensure print out
* move all plugin logic to buildSrc files
* tidy up test modification
add comments to explain what DistributedTesting plugin does
* move new plugins into properly named packages
* tidy up runConfigs
* fix compile errors due to merge with slow-integration-test work
* add system parameter to enable / disable build modification
* add -Dkubenetise to build command
* address review comments
* type safe declaration of parameters in KubesTest
* migrate PersistentIdentityService to use key.toShortString()
update definition of PublicKeyToExternalId mapping to allow fast lookup by externalId/publicKey
* fix misspelled table name
* add test of migration script
* add design document for proposal to move IdentityService to using the correct PK.toStringShort() method for hashing a publickey
* add enterprise testing considerations to design
* address review comments
* fix compilation errors
* modify PublicKeyToOwningIdentityCache to use toStringShort() as it's lookup key
* address syzmon's code review comments
