This adds a Gateway Mesh section to the web-interface (+ API endpoints)
to see the status op each Relay Gateway within the Gateway Mesh.
The Gateway Mesh (https://github.com/chirpstack/chirpstack-gateway-mesh)
is an experimental feature to extend LoRaWAN coverage throug Relay
Gateways.
This option does two things:
1) In case the passive-roaming agreement is not state-less, it will
trigger the validation of MIC (this was already implemented at the
roaming-session retrieval, but never used).
2) On PRStartAns, it will return the NwkSKey / FNwkSIntKey to the
requester (such that the MIC validation can be performed).
For state-less passive-roaming, it is recommended to leave this option
set to false, such that no session-keys are exposed.
The :latest tag points to a very old image versions, which are not
consistent with regards to the base-image. This is causing differences
in library versions across different target platforms.
Once a v0.3.0 release is available, :main can be changed into :0.3.0.
Closes#421.
NPM uses the .gitignore file, which includes the generated JS code. This
caused the v4.8.0 JS packages to be completely empty. Adding an empty
.npmignore file resolves the issue as if a .npmignore file is detected,
the .gitignore file is ignored.
This reverts commit 4f1a1bbce5. This was
intended to improve the development speed, but it breaks the build. This
is because even when cross-compiling, the Rust compiler does compile
some code for the host target for code-generation.
In this case, we return the (primary) NetID of the ChirpStack instance.
Supporting the HomeNSReq is useful in the case the roaming ChirpStack
instances are setup to resolve the servers using DNS. In case of OTAA,
the fNS resolves the JoinEUI to a hostname to which it must make the
HomeNSReq. This returns the HNetID, which then can be used to resolve
the hostname of the hNS to which the join-request must be forwarded.
onFocus is only triggered when when dropdown doesn't have focus where
onDropdownVisibleChange is always triggered when opening / closing the
dropdown.
Closes#334.
This makes it a lot easier to iterate over the intervals, as we no
longer have to take into account DST changes that could either result in
an invalid or ambiguous date, or not incrementing by the expected
interval. E.g. incrementing by 1 day resulting in a 23 hour increment
because or DST change.
On returning the metrics, we try to convert the NaiveDateTime back into
a DateTime<Local>, failing that, we skip it rather than failing on it.
Closes#415.
In general ChirpStack is configured with a rx1_delay configuration
matching the network latency (e.g. on cellular, one might want to set
this to rx1_delay=3). However, this does not take into account a
possible latency of the end-application. Handling the uplink and
enqueueing a downlink might take more time than the configured rx1_delay
(and get_downlink_data_delay) allows.
This option makes it possible to increase the RX1 Delay in the
device-profile. If the RX1 Delay has between increased relative to
the system default, then the get_downlink_data_delay will be
incremented with the same amount of seconds.
This needs to be tracked by git to make cargo publish work. If this
folder is in the .gitignore, then cargo publish will ignore this folder
as well and the publish command will fail because of missing .proto
files. If we would temporarily remove / rename the .gitignore file, then
cargo publish will error because the git state is dirty.
