1.4 KiB
device init [device]
Use this command to download the OS image of a certain application and write it to an SD Card.
Note that this command requires admin privileges.
If device is omitted, you will be prompted to select a device interactively.
Notice this command asks for confirmation interactively.
You can avoid this by passing the --yes boolean option.
You can quiet the progress bar by passing the --quiet boolean option.
You may have to unmount the device before attempting this operation.
You need to configure the network type and other settings:
Ethernet:
You can setup the device OS to use ethernet by setting the --network option to "ethernet".
Wifi:
You can setup the device OS to use wifi by setting the --network option to "wifi".
If you set "network" to "wifi", you will need to specify the --ssid and --key option as well.
You can omit network related options to be asked about them interactively.
Examples:
$ resin device init --application 91
$ resin device init --application 91 --network ethernet
$ resin device init /dev/disk2 --application 91 --network wifi --ssid MyNetwork --key secret
Options
--application, --a,app, --a,app <application>
application id
--network, -n <network>
network type
--ssid, -s <ssid>
wifi ssid, if network is wifi
--key, -k <key>
wifi key, if network is wifi