142 lines
3.3 KiB
Bash
142 lines
3.3 KiB
Bash
#!/bin/bash
|
|
#Script for configuring iLO - modified version, works with hponcfg-4.2.0-0.i386.rpm
|
|
|
|
#set -x
|
|
|
|
function configure-ilo()
|
|
{
|
|
echo "Now running $FUNCNAME...."
|
|
|
|
|
|
#Install hponcfg
|
|
#yum install -y hponcfg
|
|
|
|
#Reset to factory defaults (just in case)
|
|
hponcfg -r
|
|
|
|
#Dynamic values for the generated XML
|
|
ILONAME="$(hostname -s)-iLO"
|
|
ILOIP="$(dig -x @DNS_SERVER_IP $ILONAME.$TLD +short)"
|
|
|
|
#VLAN verification and configuration
|
|
case $ILOIP in
|
|
172.16.10*.*)
|
|
GATEWAY=172.16.103.254
|
|
NETMASK=255.255.252.0
|
|
ENABLEV=Y
|
|
VLAN=101
|
|
;;
|
|
172.16.11*.*)
|
|
GATEWAY=172.16.115.254
|
|
NETMASK=255.255.252.0
|
|
ENABLEV=Y
|
|
VLAN=112
|
|
;;
|
|
172.17.1.*)
|
|
GATEWAY=0.0.0.0
|
|
NETMASK=255.255.252.0
|
|
ENABLEV=N
|
|
VLAN=243
|
|
;;
|
|
172.17.2.*)
|
|
GATEWAY=0.0.0.0
|
|
NETMASK=255.255.252.0
|
|
ENABLEV=N
|
|
VLAN=243
|
|
;;
|
|
esac
|
|
|
|
#Build xml config file for ILO
|
|
cat > /tmp/ilo.dat <<ENDILO
|
|
<!-- HPONCFG VERSION = "1.9" -->
|
|
<!-- Generated 1/31/2013 16:8:49 -->
|
|
<RIBCL VERSION="2.1">
|
|
<LOGIN USER_LOGIN="Administrator" PASSWORD="xxxxx">
|
|
<DIR_INFO MODE="write">
|
|
<MOD_DIR_CONFIG>
|
|
<DIR_AUTHENTICATION_ENABLED VALUE = "No"/>
|
|
<DIR_LOCAL_USER_ACCT VALUE = "Y"/>
|
|
<DIR_SERVER_ADDRESS VALUE = ""/>
|
|
<DIR_SERVER_PORT VALUE = "636"/>
|
|
<DIR_OBJECT_DN VALUE = ""/>
|
|
<DIR_OBJECT_PASSWORD VALUE = ""/>
|
|
<DIR_USER_CONTEXT_1 VALUE = ""/>
|
|
<DIR_USER_CONTEXT_2 VALUE = ""/>
|
|
<DIR_USER_CONTEXT_3 VALUE = ""/>
|
|
</MOD_DIR_CONFIG>
|
|
</DIR_INFO>
|
|
<RIB_INFO MODE="write">
|
|
<MOD_NETWORK_SETTINGS>
|
|
<DHCP_ENABLE VALUE = "No"/>
|
|
<SPEED_AUTOSELECT VALUE = "Yes"/>
|
|
<NIC_SPEED VALUE = "10"/>
|
|
<FULL_DUPLEX VALUE = "Y"/>
|
|
<IP_ADDRESS VALUE = "$ILOIP"/>
|
|
<SUBNET_MASK VALUE = "$NETMASK"/>
|
|
<GATEWAY_IP_ADDRESS VALUE = "$GATEWAY"/>
|
|
<DNS_NAME VALUE = "$ILONAME"/>
|
|
<PRIM_DNS_SERVER value = "10.207.12.78"/>
|
|
<DOMAIN_NAME VALUE = "tplab.tippingpoint.com"/>
|
|
<DHCP_GATEWAY VALUE = "No"/>
|
|
<DHCP_DNS_SERVER VALUE = "No"/>
|
|
<DHCP_STATIC_ROUTE VALUE = "No"/>
|
|
<DHCP_WINS_SERVER VALUE = "No"/>
|
|
<REG_WINS_SERVER VALUE = "No"/>
|
|
<PRIM_WINS_SERVER VALUE = ""/>
|
|
<SHARED_NETWORK_PORT VALUE="Y"/>
|
|
<VLAN_ENABLED VALUE = "$ENABLEV"/>
|
|
<VLAN_ID VALUE = "$VLAN"/>
|
|
</MOD_NETWORK_SETTINGS>
|
|
<!-- iLO Advanced Activation -->
|
|
<LICENSE>
|
|
<ACTIVATE KEY="3GMPZW29YQP242466Q99355BM" />
|
|
</LICENSE>
|
|
</RIB_INFO>
|
|
<USER_INFO MODE="write">
|
|
<ADD_USER
|
|
USER_NAME="Guest"
|
|
USER_LOGIN="Guest"
|
|
PASSWORD="Wund3rB4r!!">
|
|
<ADMIN_PRIV value="Y"/>
|
|
<REMOTE_CONS_PRIV value="Y"/>
|
|
<RESET_SERVER_PRIV value="Y"/>
|
|
<VIRTUAL_MEDIA_PRIV value="Y"/>
|
|
<CONFIG_ILO_PRIV value="Y"/>
|
|
</ADD_USER>
|
|
</USER_INFO>
|
|
<USER_INFO MODE="write">
|
|
<MOD_USER USER_LOGIN="Administrator">
|
|
<USER_NAME value="Administrator"/>
|
|
<PASSWORD value="admin11=="/>
|
|
<ADMIN_PRIV value="N"/>
|
|
<REMOTE_CONS_PRIV value="Y"/>
|
|
<RESET_SERVER_PRIV value="Y"/>
|
|
<VIRTUAL_MEDIA_PRIV value="N"/>
|
|
<CONFIG_ILO_PRIV value="N"/>
|
|
</MOD_USER>
|
|
</USER_INFO>
|
|
</LOGIN>
|
|
</RIBCL>
|
|
|
|
ENDILO
|
|
|
|
#Apply config to the ILO card
|
|
hponcfg -f /tmp/ilo.dat
|
|
|
|
echo "iLO configured on $ILONAME, IP: $ILOIP"
|
|
}
|
|
|
|
#configure-ilo
|
|
|
|
##########################################################################################
|
|
## Control logic for the script ##
|
|
##########################################################################################
|
|
main()
|
|
{
|
|
echo "Configuring iLo on $ILONAME at $(date)"
|
|
|
|
configure-ilo
|
|
}
|
|
|
|
main
|