organzing for portfolio

SysadminAutomation/ServerAutomation/out-of-band/config-iLO

@@ -0,0 +1,141 @@
+#!/bin/bash
+#Script for configuring iLO - modified version, works with hponcfg-4.2.0-0.i386.rpm
+
+#set -x
+
+function configure-ilo()
+{
+echo "Now running $FUNCNAME...."
+
+
+#Install hponcfg
+#yum install -y hponcfg
+
+#Reset to factory defaults (just in case)
+hponcfg -r
+
+#Dynamic values for the generated XML
+ILONAME="$(hostname -s)-iLO"
+ILOIP="$(dig -x @DNS_SERVER_IP $ILONAME.$TLD +short)"
+
+#VLAN verification and configuration
+case $ILOIP in
+172.16.10*.*)
+GATEWAY=172.16.103.254
+NETMASK=255.255.252.0
+ENABLEV=Y
+VLAN=101
+;;
+172.16.11*.*)
+GATEWAY=172.16.115.254
+NETMASK=255.255.252.0
+ENABLEV=Y
+VLAN=112
+;;
+172.17.1.*)
+GATEWAY=0.0.0.0
+NETMASK=255.255.252.0
+ENABLEV=N
+VLAN=243
+;;
+172.17.2.*)
+GATEWAY=0.0.0.0
+NETMASK=255.255.252.0
+ENABLEV=N
+VLAN=243
+;;
+esac
+
+#Build xml config file for ILO
+cat > /tmp/ilo.dat <<ENDILO
+<!-- HPONCFG VERSION = "1.9" -->
+<!-- Generated 1/31/2013 16:8:49 -->
+<RIBCL VERSION="2.1">
+ <LOGIN USER_LOGIN="Administrator" PASSWORD="xxxxx">
+  <DIR_INFO MODE="write">
+  <MOD_DIR_CONFIG>
+    <DIR_AUTHENTICATION_ENABLED VALUE = "No"/>
+    <DIR_LOCAL_USER_ACCT VALUE = "Y"/>
+    <DIR_SERVER_ADDRESS VALUE = ""/>
+    <DIR_SERVER_PORT VALUE = "636"/>
+    <DIR_OBJECT_DN VALUE = ""/>
+    <DIR_OBJECT_PASSWORD VALUE = ""/>
+    <DIR_USER_CONTEXT_1 VALUE = ""/>
+    <DIR_USER_CONTEXT_2 VALUE = ""/>
+    <DIR_USER_CONTEXT_3 VALUE = ""/>
+  </MOD_DIR_CONFIG>
+  </DIR_INFO>
+  <RIB_INFO MODE="write">
+	<MOD_NETWORK_SETTINGS>
+	<DHCP_ENABLE VALUE = "No"/>
+	<SPEED_AUTOSELECT VALUE = "Yes"/>
+	<NIC_SPEED VALUE = "10"/>
+	<FULL_DUPLEX VALUE = "Y"/>
+	<IP_ADDRESS VALUE = "$ILOIP"/>
+	<SUBNET_MASK VALUE = "$NETMASK"/>
+	<GATEWAY_IP_ADDRESS VALUE = "$GATEWAY"/>
+	<DNS_NAME VALUE = "$ILONAME"/>
+	<PRIM_DNS_SERVER value = "10.207.12.78"/>
+	<DOMAIN_NAME VALUE = "tplab.tippingpoint.com"/>
+	<DHCP_GATEWAY VALUE = "No"/>
+	<DHCP_DNS_SERVER VALUE = "No"/>
+	<DHCP_STATIC_ROUTE VALUE = "No"/>
+	<DHCP_WINS_SERVER VALUE = "No"/>
+	<REG_WINS_SERVER VALUE = "No"/>
+	<PRIM_WINS_SERVER VALUE = ""/>
+	<SHARED_NETWORK_PORT VALUE="Y"/>
+	<VLAN_ENABLED VALUE = "$ENABLEV"/>
+	<VLAN_ID VALUE = "$VLAN"/>
+  </MOD_NETWORK_SETTINGS>
+	<!-- iLO Advanced Activation -->
+    <LICENSE> 
+		<ACTIVATE KEY="3GMPZW29YQP242466Q99355BM" />
+    </LICENSE>
+  </RIB_INFO>
+  <USER_INFO MODE="write">
+    <ADD_USER
+      USER_NAME="Guest"
+      USER_LOGIN="Guest"
+      PASSWORD="Wund3rB4r!!">
+      <ADMIN_PRIV value="Y"/>
+      <REMOTE_CONS_PRIV value="Y"/>
+      <RESET_SERVER_PRIV value="Y"/>
+      <VIRTUAL_MEDIA_PRIV value="Y"/>
+      <CONFIG_ILO_PRIV value="Y"/>
+    </ADD_USER>
+  </USER_INFO>
+  <USER_INFO MODE="write">
+    <MOD_USER USER_LOGIN="Administrator">
+      <USER_NAME value="Administrator"/>
+      <PASSWORD value="admin11=="/>
+      <ADMIN_PRIV value="N"/>
+      <REMOTE_CONS_PRIV value="Y"/>
+      <RESET_SERVER_PRIV value="Y"/>
+      <VIRTUAL_MEDIA_PRIV value="N"/>
+      <CONFIG_ILO_PRIV value="N"/>
+    </MOD_USER>
+  </USER_INFO>
+ </LOGIN>
+</RIBCL>
+
+ENDILO
+
+#Apply config to the ILO card
+hponcfg -f /tmp/ilo.dat
+
+echo "iLO configured on $ILONAME, IP: $ILOIP"
+}
+
+#configure-ilo
+
+##########################################################################################
+##		Control logic for the script						##
+##########################################################################################
+main()
+{
+echo "Configuring iLo on $ILONAME at $(date)"
+
+configure-ilo
+}
+
+main