diff --git a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/RackRental/NetworkSimulationVendorInformation.md b/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/RackRental/NetworkSimulationVendorInformation.md deleted file mode 100644 index 2e44107..0000000 --- a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/RackRental/NetworkSimulationVendorInformation.md +++ /dev/null @@ -1,3 +0,0 @@ -# information on Network Simulation Vendors - -- diff --git a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/RackRental/README.md b/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/RackRental/README.md deleted file mode 100644 index 763905d..0000000 --- a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/RackRental/README.md +++ /dev/null @@ -1,2 +0,0 @@ -# RRdocs - diff --git a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/RackRental/RackRentalPunchList.md b/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/RackRental/RackRentalPunchList.md deleted file mode 100644 index 1616948..0000000 --- a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/RackRental/RackRentalPunchList.md +++ /dev/null @@ -1,23 +0,0 @@ -# RackRental punch list - -- [RackRental punch list](#rackrental-punch-list) - - [General Infrastructure/IT needs](#general-infrastructure-it-needs) - - [SBC setup](#sbc-setup) - - [Provisioning Backend](#provisioning-backend) - -## General Infrastructure/IT needs - -- Power up rackrental router (2800), switch, console server -- confirm final console ports -- setup console / power port mapping on cyclades -- Setup bastillion for RackRental -- Setup 6 rackrental general vlans - -## SBC setup - -- Setup a docker container on pfv-maas for - - parallela (xilinx) - - esp (arduino) - - sifive (FreedomStudio) - -## Provisioning Backend \ No newline at end of file diff --git a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/RackRental/auto-provision.txt b/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/RackRental/auto-provision.txt deleted file mode 100644 index e7d69be..0000000 --- a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/RackRental/auto-provision.txt +++ /dev/null @@ -1,51 +0,0 @@ -Cisco - -Switch -https://supportforums.cisco.com/t5/network-infrastructure-documents/how-to-use-zero-touch-smartinstall/ta-p/3112248 -https://www.cisco.com/c/en/us/td/docs/switches/lan/smart_install/configuration/guide/smart_install.html - - -Router -https://www.cisco.com/en/US/docs/ios/12_1t/12_1t5/feature/guide/dt_dhcpa.html -https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/111452-autoinstall-feature-wlc.html -(ap) https://www.cisco.com/c/en/us/support/docs/wireless/aironet-1200-series/113353-autoinstall-aap-config.html - -voip -https://www.cisco.com/c/en/us/support/docs/voice-unified-communications/ip-communicator/113589-ar-ipc-cucm-00.html -https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_5_1/ccmsys/accm-851-cm/a02tftp.html#wp1042446 - -o - -Mikrotik -https://commotionwireless.net/docs/guides-howtos/installation-server-setup/ - -ubnt -https://help.ubnt.com/hc/en-us/articles/204959514-EdgeRouter-Last-Resort-Recovery -https://community.ubnt.com/t5/EdgeRouter/How-to-upload-configuration-to-edge-router-from-CLI/td-p/1888889 -https://community.ubnt.com/t5/EdgeRouter/Official-TFTP-recovery-for-EdgeMAX-products-needed/td-p/1593478 - - -f5 -https://devcentral.f5.com/articles/f5-devops-libraries-simplify-big-ip-provisioning-reset-and-ha-pairing-21908 -https://support.f5.com/kb/en-us/products/big-ip_ltm/releasenotes/clean_install_9_4_x.html - - -brocade -https://www.google.com/search?q=brocade+ztp&oq=brocade+ztp&aqs=chrome..69i64j5.1930j1j9&sourceid=chrome&ie=UTF-8 -https://github.com/tbraly/campus_ztp - - -dell -http://www.dell.com/downloads/global/products/pwcnt/en/app_note_12.pdf - - -netgear -https://www.netgear.com/images/Application_Notes18-71326.pdf -https://kb.netgear.com/22688/How-to-upload-firmware-to-a-NETGEAR-router-using-TFTP - - -juniper -https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/software-image-and-configuration-automatic-provisioning-confguring.html - -huawei -http://support.huawei.com/enterprise/jp/doc/DOC1000086918 \ No newline at end of file diff --git a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/RackRental/rrTodo b/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/RackRental/rrTodo deleted file mode 100644 index 152d89e..0000000 --- a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/RackRental/rrTodo +++ /dev/null @@ -1,15 +0,0 @@ - -################################### -Physical infrastructure work -################################## -Rack and stack: - Finish galielo bringup - Finish parallella bringup - - -Finish middleware -Get finalized inventory into spreadsheet -Deploy nomad/counsul across SATX/AUSLAB -Deploy MAAS on auslab-core-rtr -Deploy MAAS on auslab-linsrv -(kick off Ubuntu 32/64/arm image imports at both, that will need to run for sometime) diff --git a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/RackRental/tsys-pfv-power.pdf b/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/RackRental/tsys-pfv-power.pdf deleted file mode 100644 index 32692b0..0000000 Binary files a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/RackRental/tsys-pfv-power.pdf and /dev/null differ diff --git a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/RackRental/tsys-power.ods b/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/RackRental/tsys-power.ods deleted file mode 100644 index d0c316e..0000000 Binary files a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/RackRental/tsys-power.ods and /dev/null differ diff --git a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/StartingLineProductions/ToolAndEquipmentInventory.md b/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/StartingLineProductions/ToolAndEquipmentInventory.md deleted file mode 100644 index 88d4adb..0000000 --- a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/StartingLineProductions/ToolAndEquipmentInventory.md +++ /dev/null @@ -1,37 +0,0 @@ -- [Starting Line Productions LLC Inventory](#starting-line-productions-llc-inventory) - - [HQ - office/lab](#hq---officelab) - - [HQ - dirty shop](#hq---dirty-shop) - - [Diogenes](#diogenes) - - [RF lab](#rf-lab) - - [Environmental Lab](#environmental-lab) - - [CNC](#cnc) - -# Starting Line Productions LLC Inventory - -## HQ - office/lab - -| Record Number | Asset Tag | Description/Link| Quantity | Purchase Cost | Replacement Cost | -|---------------|-----------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------|----------|---------------|------------------| -| 1 | | Magnetizer / de-magnetizer | 1 | 4.95 | 4.95 | -| 2 | | Pens, pencils, sharpies, highlighters | n/a | 25.00 | 25.00 | -| 3 | | Magnetic Pickup tool/level | 1 | 14.48 | 14.48 | -| 4 | | T-handle ball end hex key set | 1 | 19.99 | 19.99 | -| 5 | | Infrared thermometer | 1 | 199.99 | 199.99 | -| 6 | | | | | | -| 7 | | | | | | -| 8 | | | | | | -| 9 | | | | | | -| 10 | | | | | | -| 11 | | | | | | -| 12 | | | | | | -| 13 | | | | | | - -## HQ - dirty shop - -## Diogenes - -### RF lab - -### Environmental Lab - -### CNC diff --git a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/Subo/RDTodoList.md b/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/Subo/RDTodoList.md deleted file mode 100644 index 85cb3c5..0000000 --- a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/Subo/RDTodoList.md +++ /dev/null @@ -1,297 +0,0 @@ -- [R&D Todo](#rd-todo) - - [Shop Equipment](#shop-equipment) - - [PCB Assembly/rework workflow](#pcb-assemblyrework-workflow) - - [PCB Stencil making](#pcb-stencil-making) - - [Reflow Oven](#reflow-oven) - - [Pick N Place Machine](#pick-n-place-machine) - - [Other elements](#other-elements) - - [Environmental chamber](#environmental-chamber) - - [RF Chamber](#rf-chamber) - - [Overview](#overview) - - [Hardware](#hardware) - - [Process](#process) - - [Enclosure](#enclosure) - - [CNC/3d](#cnc3d) - - [CNC](#cnc) - - [3d printer workflow/ops](#3d-printer-workflowops) - - [TSYS R&D Lab Workstation Needs](#tsys-rd-lab-workstation-needs) - - [RF](#rf) - - [SDR server](#sdr-server) - - [EE](#ee) - - [Documentation of existing POC](#documentation-of-existing-poc) - -# R&D Todo - -## Shop Equipment - -### PCB Assembly/rework workflow - -#### PCB Stencil making - -Setup workstation on dirty shop bench to drive the Silhouette cameo cutter to make PCB stencils. - -Below links are a curated collection of all the particulars. - -- -- -- -- -- -- -- -- -- - -#### Reflow Oven - -- - -we need to start at - -#### Pick N Place Machine - -- -- -- -- -- - -Some combination of the above is arriving (currently projected) in March 2022 from a kickstarter campaign. - -#### Other elements - -- De-ionized water - -### Environmental chamber - -### RF Chamber - -#### Overview - -- -- -- -- -- -- -- -- -- -- - -#### Hardware - -- -- - -#### Process - -#### Enclosure - -- -- -- -- -- -- -- -- - -to categorize - -- -- -- -- -- -- -- -- - -### CNC/3d - -We have a crealty ender (something) which has laser cuter, filament extruder, cnc. - -We also have monoprice 3d printers. - -#### CNC - -- Deploy -- Deploy - -The following are some options to drive the controller - -- -- -- - -Depending on maintenance , installation difficulty, features etc, may end up with multiple options. - -#### 3d printer workflow/ops - -Evaluate - -- -- -- - -Leaning towards MatterControl - -MatterControl has an issue post install, bug report at - -## TSYS R&D Lab Workstation Needs - -### RF - -- -- -- -- -- -- - -### SDR server - -Idea is to use the raspi4 on the lab bench, with the various SDR/pluto USB radios hung off it and stream the output to the (either/or) upstairs GPU farm or downstairs gpu/cpu server farm for processing. - -- -- -- -- -- -- -- - -### EE - -- Setup bitscope -- Setup openocd server and -- Setup sigrok with logging multimeter - - - - - -- Setup bus pirate -- Setup document camera -- Setup USB microscope and -- Setup jtag and and (google openocd st-link v2 ) (maybe add jtag as well) - -``` -For the above items that present serial port over USB, we need to setup persistent device names. - -Here is some text on how to do that from - -" -Assigning Serial Ports - -On Linux, serial port assignments can change whenever a printer is connected or disconnected. MatterControl cannot tell which printer is connected to which serial port. You can setup a udev rule to permanently assign a unique port to your printer. - -Do ls /dev/tty* before and after connecting your printer to find out which port it is assigned to. Printers will show up as either /dev/ttyACM# or /dev/ttyUSB#. - -Use udevadm to get the serial number (UUID) of the USB device. This is a unique 20 digit hexadecimal value. - -$ udevadm info --attribute-walk -n /dev/ttyACM0 | grep "serial" - -Some printers will not report a serial number. In this case, you will have to use other attributes to identify it such as the vendor ID (idVendor) and the product ID (idProduct). - -Create a file /etc/udev/rules.d/97-3dprinters.rules. Here is an example with rules for two printers. - -SUBSYSTEM=="tty", ATTRS{serial}=="6403237383335190E0F1", GROUP="uucp", MODE="0660", SYMLINK+="tty-taz" -SUBSYSTEM=="tty", ATTRS{idVendor}=="16d0", ATTRS{idProduct}=="076b", GROUP="uucp", MODE="0660", SYMLINK+="tty-kosselpro" - -Fill in either the serial number or vender and product IDs based on the information you obtained earlier. Make sure GROUP is set to the same group ownership as the rest of your serial ports. This is usually dialout on Debian or uucp on Arch. You can check by doing ls -l /dev/ttyACM*. Lastly, give your printer a unique name for the SYMLINK. This name must start with tty or it will not show up in the list in MatterControl. - -The next time you connect the printer, a symlink will automatically be created that points to the correct serial device. You can now edit the printer in MatterControl and choose the new device. -" - -Here is an example rule from a production system at tsys: - -root@pfv-vmsrv-04:/etc/udev/rules.d# cat 99-usb-serial.rules - -# examples from - -# -# - -# SUBSYSTEM=="tty", ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="7523", SYMLINK+="rah-ctrl" - -# SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", ATTRS{serial}=="A6008isP", SYMLINK+="arduino" - -# SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", ATTRS{serial}=="A7004IXj", SYMLINK+="buspirate" - -# SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", ATTRS{serial}=="FTDIF46B", SYMLINK+="ttyUSB.ARM" - -# Apply changes via - -# - -# udevadm control --reload-rules && sudo udevadm trigger - -# - -#################################### - -# USB serial for UPS - -#################################### - -# Bus 002 Device 045: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port - -# root@pfv-vmsrv-03:~# udevadm info --name=/dev/ttyUSB2 --attribute-walk|grep -i vendor - -# ATTRS{idVendor}=="067b" - -# ATTRS{idVendor}=="2109" - -# ATTRS{idVendor}=="8087" - -# ATTRS{idVendor}=="1d6b" - -# ATTRS{subsystem_vendor}=="0x1028" - -# ATTRS{vendor}=="0x8086" - -# root@pfv-vmsrv-03:/etc/snmp# udevadm info --name=/dev/ttyUSB2 --attribute-walk|grep -i serial - -# SUBSYSTEMS=="usb-serial" - -# ATTRS{product}=="USB-Serial Controller" - -# ATTRS{serial}=="0000:00:1d.0" - -# root@pfv-vmsrv-03:/etc/udev/rules.d# udevadm info -a -n /dev/ttyUSB0 | grep '{serial}' | head -n1 - -# ATTRS{serial}=="0000:00:1d.0" - -# SUBSYSTEM=="tty", ATTRS{idVendor}=="067b", ATTRS{idProduct}=="2303", ATTRS{serial}=="0000:00:1d.0", SYMLINK+="ups4" - -SUBSYSTEM=="tty", ATTRS{idVendor}=="067b", ATTRS{idProduct}=="2303", SYMLINK+="ups4" -#################################### - -# USB serial for sifive - -#################################### -#################################### - -# USB serial for parallella - -#################################### - - - -and - - - -would be some things to check out. -``` - -## Documentation of existing POC - -- POC1 Hardware -- Software Engineering tooling stack -- Hardware Engineering tooling stack -- Mechanical/Industrial design tooling stack -- Software Engineering supply chain (software components) stack -- Hardware Engineering supply chain (hardware/software components ) stack diff --git a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/Subo/SuboLinks.md b/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/Subo/SuboLinks.md deleted file mode 100644 index 4b92e72..0000000 --- a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/Subo/SuboLinks.md +++ /dev/null @@ -1,47 +0,0 @@ -# Suborbital Links - -## Introduction - -This is a collection of links related to suborbital. I need to integrate this material into the MorseFlyerDocs repository. - -## Device fleet management - -### Backend - -- - -- - -- - -### Client side - -- - -- - -- - -- - -- - -### Telemetry - -- - -- - -- - -- - -- - -- - -- - -- - -- diff --git a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/Subo/SuboPiDocs.md b/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/Subo/SuboPiDocs.md deleted file mode 100644 index 6f561bd..0000000 --- a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/Subo/SuboPiDocs.md +++ /dev/null @@ -1,49 +0,0 @@ - -# Suborbital Systems Pi Systems - -## Ground Stations - -### Subopi2 - -* System Name: Subopi2 -* Pi Hat: Lora Concentrator (todo: document brand) -* USB Device: Arduino UNO with servo control board (attached to antenna tracker high precision) - -### Subopi3 - -* System Name: Subopi3 -* Pi Hat: None -* USB Device: Lora Concentrator (todo: document brand) - -## Flight Computers - -### Subopi5 - -* System Name: Subopi5 -* Pi Hat: Sense Hat -* USB Accessory: Seeduino Lora/GPS Package - -### Subopi6 - -* System Name: Subopi6 -* Pi Hat: Sense Hat -* USB Accessory: Seeduino Lora/GPS Package - -## Payload - -### Subopi 4 - -This is an IOT / IP payload system - -* Pi Hat: Lora GPS (Dragino) -* USB Accessory: - * Omnidirectional USB wifi with rubber ducky antenna - * TI Sensor Tag programmer/debugger (it can operate standalone via bluetooth but uses the USB board to program) - -### Subopi 1 - -This is an IP payload system - -* Pi Hat: None -* Special notes: Zymbit HSM, multiple wifi interfaces built in -* USB Accessory: Directional USB wifi with special antenna \ No newline at end of file diff --git a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/Subo/SuboPiDocs.pdf b/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/Subo/SuboPiDocs.pdf deleted file mode 100644 index 2868220..0000000 Binary files a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/Subo/SuboPiDocs.pdf and /dev/null differ diff --git a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/Subo/engineering-orbiter-crossSection.PDF b/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/Subo/engineering-orbiter-crossSection.PDF deleted file mode 100644 index 3acf853..0000000 --- a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/Subo/engineering-orbiter-crossSection.PDF +++ /dev/null @@ -1,172 +0,0 @@ -%PDF-1.4 -% -1 0 obj -<< -/Creator (Canon MF731C/733C) -/CreationDate (D:20210401091551-06'00') -/Producer (\376\377\000A\000d\000o\000b\000e\000 \000P\000S\000L\000 \0001\000.\000\ -4\000e\000 \000f\000o\000r\000 \000C\000a\000n\000o\000n\000\000) ->> -endobj -2 0 obj -<< -/Pages 3 0 R -/Type /Catalog -/OutputIntents 10 0 R -/Metadata 11 0 R ->> -endobj -4 0 obj -<< /Type /XObject /Subtype /Image /Width 2550 /Height 3300 /BitsPerComponent 1 -/ColorSpace /DeviceGray /Filter /CCITTFaxDecode /DecodeParms << /K -1 /Columns 2550 >> -/Length 13068 >> -stream -Q5"&#0" a %)DB""qB"&h4G C;B"P4'B H'.ԄꏢT"jB#2BF"Ij*}S hH%H(B"1%Jt%֎!hS;5B ,)P"$(E"# -M!TD6YQeT%>dRqUBa4]H1 -ķxG[JdBc"iDOȒ(JҏSG,QFEU1%$ C;B|mi#0菜Fc>KM#p#a -#‘̏KI-E8f28B?- \#z"$6>Hs' #"ti"菗sUe ČsVR`"V 8㔘-"DDqs!U8bqɎ[9NT "Øq$9ZNeHDDD3Lq"iE!JTq f`"'t""y KQt(4E躄cpB'fK| @A"f -C.n#B$ #-БBE["8` 1$rFCmgrKaClŗPdtMA Bd0+, d0]K1iB B(  -uy, 8 b `B:&a:`ނn @ʀ 2!c,2LIJ #fjGPD)q0pE!$Y B$"ˠ#CGPLaɺ!PYʙe \!0FpdF @(pp l@8$  A!h = dV7 GP \  x@$A%h$#) !: n8E)HSA]AAA0!t  Yΐ B 0p@;B&JBF:L7ZG!8 Tr7nIDp a:n7R@RልGpDEBAdrR; Dܠr8ЈDv]]"n&N827H":L炛dZz&B PB[GDpn]t= 18 "nH%G u&᠅#$B(`@| DAYM"m}xA PSq#dz& q9Fjw!H# -MGrds|"l) -LÈ"9ÂjwDr87A!`Dq(JUށpaXEq8wQZG #z9#ap#.6> 8?HÄ -", (">gú(e - Ń : B6ρ  !.lu@e`7 AAЦI "; tq!lm @El9^m,7P8 7t=MAl6A# -Y_ l= DtdCp-At`莴 A duP!1GXn0mR 3aBa 6q,{.$-l:h"?PNIt)L Au0۠P,;Ab Q 7AaiCo+H 0}5Za} utgAˮe}*cyٙ#GAÂ,{]RJ,>H:H / 7Du`pH$IX}m%BmL;T,G -0o m%6kI! J7tH0wty:ŇDuAuH.CBâ:h":#c㦅Bov@ø@$)"麤":T`A ށAXzI}GAhmh @ TM*I n-M„q IäAIE*I 'Q7L#; CCmJ`EVE@M8Z^a돪V+qpAzMq H0۠Du@eTPZH۝4#pD|BZa㲀+B $T- H-:tGP$𱄘m-$$m[IRa*UTo!HT0I*L6'nADua(I[H("> V($o\&+o"҉6' j)U(M۴2M$6wD]7T!Vh_/8aتD O[#HYS0&aK #|mR<_v"nj3RQ x">(vG.B!"}+i#x¾grrGA#O&Dtk& ̎GMۥDBGBp;Nq0nJ莩&iDA7S B'eBwȎMIGMb\Nɂ;[G@d0nS&x I]=P X.pH%(#T#AtGZdpr:a 2IQ" B>ߤB H͋~$IH`l(Odp]B oY)wI"l$DX>BEq@F۵ rmPmR˧Z8FI(A $ HսRc# äAF^A:AA:! l]$Q ;("(V۠D}pdFB#H6GTl_H~`E6 ީP6oLޡSe' @  ݺ0wXaޖMw|$ 0$Mp z\XméTFGIoӠth#aȒA(ۨQ ߆## | Li-0h": &($mJ"ېDZAm\U l7*nPMb'M $$m),":p|-%@H":ZV$DtBo"yu *!@dt{ui - bxAGD Itt rMKIm&RT &:Iҷa*CMrM,*#6A [ Il7oT!mۥ# ?頃n#Dta MtUGIRJummؾ 6$.V{*DuDt$*G0m0#[/bTDuHoEbaM֒HXvG`KlmǍ]gd$6ЪAUkMzi ;il7nvP}RBuZ&Ƶnւ#nm{TmտUmAm:M更6 -ݻD~tQmAGnRMTwaGKm"ݺ;w[m>|= D{}uӍ+z$kaMҮD~oEmaXxDt}_~H"ߺA#Wm PV#GT.[;3nXV+z<":m#LJzAjLr*BI"::*Ea7oq - 'tAÄGP{oGZnX[zI..}XtS{##KDÝnT D~)pZmS.I* Ҡt#V %p߮mxDu_v'oAxmD}"?Ih$黪i@"ﱤAmGK-Bm+D u*\ZIh '洛ImGOI - ^hTm4tiw*E+n*Uߎ֑_ ĸӽiB__cniܔUH%JE]$A">tIUFRIAI LoBK",j֨":o~RBӑx_ iOUZ^.8htݗA|BGK!BzKI#UJo`m @>j$cZ[I U--4IS4PDt_ā #dtM` [8WK|.J#IP)]VnAת^JDDuBi펒IwXImFK:’ZO"?IkI31E$b>":+0bU\4GJ]$1Du= D~U]hDt}P"Cb߻":;mZ])] G]L%TNjo DGOOWoc AS1HVێ/ڴnz}w須߭AoÎwv}tn#wIoZｴGM!\":n[mAmlZQiU_cGNnޓt~Gw#G#\":[w}[ *^"?t []GU -ƽduPD}o%Zvu":uPN,6莯ZzJGDuDu쎘~ǧ@ޒ -p;zmX{pD|+_noGwV~} Ҿ+:G^GMMTwwVR]:wZ{n"R[aw # -JT[%aJƭ#}Ȳ+or:~Ɓ\2]@nnzp&TJtnKa^qI}#;@v]GI]쒚@ww/Ij_B#Qix{":vzD~/":7wi0=$=Tb;O߇]VDu= -뵶݆mj/w;(MA?#":ƁQWvjDp%ǷDuu":v޿wZ .״׸Duwe3 [mn PA_[=uRmDt_^#[ۊV#Ƽ"?莺GҪqtpۇ>I~ݠDuO݄GQjڿ@VoKm#( Ua{tGUzwDutM[#Ï֗#uc{:~#6MwֿJMmGUwNtפwD}^c#p{Kk-VtGQuD}dVd~F#JWQoA{BmENK}tê$:DuĎBJmD_6a6oe7\"?qmЪ}n5]uu{iե?}wP{ނduwT.|>*{zAm#QG_vۏGN.D}G[KJF ?{ih{NZݽycXoK_ÿoi{) _莭#{oD}":o v@_oU#m#6㶿P¸ aa"?׏]4DuI{mRG?W">uc}K|-":":I%cnM{AU(D~vD}|":خǦ#zQߍ]vҮomv/+zVGIo`{Z߼&TDuߦդ߭#ؤ RX":b">v6Dum>= kqۧz]޻]}ݫ};wi+_G\ƛx;^k%! nk-!Tժ\!Tt7i&+(؇LwOQ{zDtJ@G^Dtlqt+"[vG2ZI;ԎJ@^=ZURa*aab-AtMw7O{XF>SKgRG\#_}":cat^A=[uwj}G[GZVq##GA-+i[nZ - @+}im% -7NXDuVQK(D}+UnJ#鴒KXv#Z6uW%mPD}uW#i#mn~~wKBP-p]1"?GVݪJIտ">][ul Z{:ǤoTӵP[m#Duh[ݷ|%m/龞ҮVUo]GI.Ox"?}$*G[~Z_nvݵDtH-ݮGNKoU$)ۤGTK[uKv*Zmշ#}R[zW[[#-m,%m:jVIҭ`kO}\h%T -DLnRiIJmTMޫ"ɇMT{#JEuڭ-5QU$-*(u󴼎V6)Vۭ,^Z":R cu +ީ Ju -B"I#n.*P] i>wQÿ@ҊzA/j]ۭ}ڤtmVn.'M^URAll;~xU^ւGJmt[VJmkB0iiFZ^PV":Ju]ֶAwZ]ju^tGKA*}{A*V+":]/owXTڪ]JI[XmUw#U":TImFG^4Jr:Vi}V(GS;l6¤Wa*]$G[:}P_۵ -ݺ[{/$]OJIҷ$R~]uZ#D~W:G_m&Jo*RGmƒom$xDtXց۸Q9RJGum$2+޴ҠA+oZu oKmj $\6.JAGPJ4GM$aH/Wl?OJ[TzZ -J{~pT(NGOK6$qAEahUG%"i$%opF%5m(uIjHD];%T?]KmtIvGNC(LnA*pD}*$CI -mޔDu_H6IHaVU%twuaTDueSOHURiW:aI%I(mT4%,"V%BR#a$mtvնR%eK(uݽ VICWnҸVPV # L&ҊAUѢvZA8[H_{T鷨:m.w p9ecA}ޔ2]inJ %VQ%\0[9'Z Ui+*JzWoH-+uEWa[:˵KނZۤq*!IK)F {vJ2o&++ i+PҾ -*fa*EIEE$[I* k۶E(ӸIzI_menJ$Kv~G &iTl=$T7I%aATH7*xDtGIY@ی$H%I(ZwK ]׫+d;I$d7TK5ToA%m+>ݥݢ:uH%!HXH%Q,ҥI+nUv RnJzUl4 ),L :J8jAR I-tJJelmJBåJ" Ee1n A%V7#H- cA YMJDtGM -\1$vPmVm$ɄmHDt D l4U m.JB&QÆ%-EaI+MJT0$[a [l7A$$ڠ aIA$bH$a.A n aB4%? iY[-ItmIth.:T}I$mH(菤JZ $ö 6I l5@]$m 4 -P\1 -ҳh6H$zJl@aA \l$I$ iX $Al8mH 2FL$ l6i$a+tC \6-p \8m$V` mXL%a$ :Al7 a&GA$`B -pD*Ade @PyV`cT A @ $m+0 6 0 @0aIl0aLu Ax AB(la@P`Y(!A/0-0m KmDr$w\6,0E -ˠI]QE6"( bA w A`L0`8A6gd@A($9C 8PaD! ` A+v@SIa  ‚ +A,1عܙ YB . Ax AT$f3Dp C:ڄ\0GERDtG] :eaI9ܧ(!ܧ#n.du#DH8%fP"F9r!(g_~{D  -`+HtM -VaKˠG :a$* 8pd!QZ 0@0dtI[,$\Tdt EF l)+L IaJKUQp`pH0eB!GɶV1agm`Őv@0e@彃B -h.qP@>[ (fn\d] Őv {.!h)C@]m"G( Br:-PP[5R6 A\rL4΁ -)F!"\*BZb#"L!l "^m1%%ePQRM&Mt]~$ "l]A|;%El#$(s"CqʲH}DG R/DFA v⁆1+j@{[ZR% K+0yJ;h٨6H6G]^d#rxhQnJ"7 O-"> 0(@ȭa-%"0p#50QAdUr6-%R!# Бi2鸑БtZfG$t"#r:J% |e "妔7-AXxoJx2"I:.Z. ^Yj ]c-AQNY+R)83a($rd KPŢxBpJ,!>uĵ\dtܖ2&!$ -B)pP/#nT ]9. `CM'F "#(q#yQ@H;5҂МˣxFvv|,(qiDt]FyN8Eؚ=) 1F<#Vgtc#9EьcTo#:62:1|菗DtGFՄ#Ȏ X 8#D|!dp0q6GF"hB> -stream -% CANON_PFINF_TYPE0_TEXTOFF - -endstream -endobj -6 0 obj -<< /Length 7 0 R >> -stream -q -612.00 0 0 792.00 0.00 0.00 cm -/Obj4 Do -Q - -endstream -endobj -7 0 obj -44 -endobj -8 0 obj -<< -/Type /Page -/MediaBox [ 0 0 612.0 792.0 ] -/Parent 3 0 R -/Resources << /XObject << /Obj4 4 0 R >> /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] >> -/Contents [ 5 0 R 6 0 R ] ->> -endobj -9 0 obj -<< /Filter /FlateDecode /N 3 /Length 2574 >> -stream -HyTSwoɞc [5laQIBHADED2mtFOE.c}08׎8GNg9w߽'0 ֠Jb  - 2y.-;!KZ ^i"L0- @8(r;q7Ly&Qq4j|9 -V)gB0iW8#8wթ8_٥ʨQQj@&A)/g>'Kt;\ ӥ$պFZUn(4T%)뫔0C&Zi8bxEB;Pӓ̹A om?W= -x-[0}y)7ta>jT7@tܛ`q2ʀ&6ZLĄ?_yxg)˔zçLU*uSkSeO4?׸c. R ߁-25 S>ӣVd`rn~Y&+`;A4 A9=-tl`;~p Gp| [`L`< "A YA+Cb(R,*T2B- -ꇆnQt}MA0alSx k&^>0|>_',G!"F$H:R!zFQd?r 9\A&G rQ hE]a4zBgE#H *B=0HIpp0MxJ$D1D, VĭKĻYdE"EI2EBGt4MzNr!YK ?%_&#(0J:EAiQ(()ӔWT6U@P+!~mD eԴ!hӦh/']B/ҏӿ?a0nhF!X8܌kc&5S6lIa2cKMA!E#ƒdV(kel }}Cq9 -N')].uJr - wG xR^[oƜchg`>b$*~ :Eb~,m,-ݖ,Y¬*6X[ݱF=3뭷Y~dó ti zf6~`{v.Ng#{}}jc1X6fm;'_9 r:8q:˜O:ϸ8uJqnv=MmR 4 -n3ܣkGݯz=[==<=GTB(/S,]6*-W:#7*e^YDY}UjAyT`#D="b{ų+ʯ:!kJ4Gmt}uC%K7YVfFY .=b?SƕƩȺy چ k5%4m7lqlioZlG+Zz͹mzy]?uuw|"űNwW&e֥ﺱ*|j5kyݭǯg^ykEklD_p߶7Dmo꿻1ml{Mś nLl<9O[$h՛BdҞ@iءG&vVǥ8nRĩ7u\ЭD-u`ֲK³8%yhYѹJº;.! -zpg_XQKFAǿ=ȼ:ɹ8ʷ6˶5̵5͵6ζ7ϸ9к<Ѿ?DINU\dlvۀ܊ݖޢ)߯6DScs 2F[p(@Xr4Pm8Ww)Km -endstream -endobj -10 0 obj -[ -<< /Info (sRGB IEC61966-2.1)/S /GTS_PDFA1 /OutputConditionIdentifier (Custom) -/OutputCondition ()/RegistryName ()/Type /OutputIntent /DestOutputProfile 9 0 R >> - -] -endobj -11 0 obj -<< /Type /Metadata /Subtype /XML /Length 931 >> -stream - - - - - 2021-04-01T09:15:51-06:00 - Canon MF731C/733C - - - Adobe PSL 1.4e for Canon - - - application/pdf - - - uuid:6065e3a7-00ee-f80d-60e6-3f6200010000 - - - - - -endstream -endobj -3 0 obj -<< /Type /Pages /Count 1 /Kids [8 0 R ] >> -endobj -xref -0 12 -0000000000 65535 f -0000000016 00000 n -0000000259 00000 n -0000017894 00000 n -0000000353 00000 n -0000013641 00000 n -0000013721 00000 n -0000013820 00000 n -0000013839 00000 n -0000014041 00000 n -0000016695 00000 n -0000016879 00000 n -trailer -<< -/Size 12 -/Info 1 0 R -/Root 2 0 R -/ID[] ->> -startxref -17952 -%%EOF diff --git a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/Subo/legacy-Parasail.md b/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/Subo/legacy-Parasail.md deleted file mode 100644 index 8a9d132..0000000 --- a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/Subo/legacy-Parasail.md +++ /dev/null @@ -1,41 +0,0 @@ -# Notes on Parasail - -## Requirements - -* Capable of putting up with extended UV exposure -* Memory wire leading/trailing edges of parasail - - -### Steering/navigation system - -Undefined type cable - -(self lubricating nylon) - -1 spool locking / deployment system - -4 spools of cable (back two will need lock pins, front two need geared lip) - -Navigation servo to drive front two spools - -custom item - -locking slot - -gear - -Front two spools geared because those will be used to "steer" - -Spool locker - -Weight is biggest consideration - -UV resistance is second biggest consideration - -4 pulley knuckles - -go at four corners of superstructure - -3d printed with hole through them (diagonal, inside to outside) - -Bowden tubes diff --git a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/Subo/legacy-albatrossNotes.md b/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/Subo/legacy-albatrossNotes.md deleted file mode 100644 index c5830d1..0000000 --- a/notesToIngestIntoDendron/ChiefTechnologyAndProductOfficer/Subo/legacy-albatrossNotes.md +++ /dev/null @@ -1,55 +0,0 @@ - -Albatross - -Bill of Materials: - -Avionics electronics - -Pi - -Nav radio - -Altimeter/accelerometer/imu/gps - -Servo controller - -Solenoid (when powered, locks open) - -Energy storage - -X-splitter (to charge controller, and critical load out) - -port solar in - -starboard solar in - -critical load out - -Charge controller - -Batteries (low weight vs volume) - -Avionics box (housing) - -single layer, injection molded, carbon fiber - -Carbon fiber shell - -Line box in aero gel - -Inner carbon fiber core holding electronics - -Socket power out for critical load (specifically power passthrough) (female, sealed, capped, weatherproof) - -Redundant RF for cutdown - -Super structure - -Carbon fiber tubes - -——- -Charles N Wyble -Founder TSYS Group -Email: charles@turnsys.com -Phone: 818 280 7059 -Matrix: @Charlesnw:turnsys.com