# Console Management (ser2net + conman)

Network-accessible serial console management for all production network
switches and routers, running on **pfv-tsys4** (storage server).

## Architecture

```
USB-DB9 adapters → udev symlinks (/dev/consoles/<name>) → conman (direct serial, logging + multiplexing)
```

conman opens the serial devices directly via stable udev symlinks and
provides session logging, output capture, and multi-user console
sharing. Clients connect to conmand over the Tailscale interface
(`100.70.77.93:7890`).

ser2net is installed but **disabled** — kept for emergency direct TCP
access only (see [Emergency Access](#emergency-access) below). It must
NOT run simultaneously with conmand (both would compete for the serial
devices).

## The USB Enumeration Problem (SOLVED)

The 9 Prolific USB-to-DB9 adapters (`067b:2303`) on pfv-tsys4 have **no
unique USB serial numbers** and get assigned `/dev/ttyUSB0-8` based on
enumeration order, which shifts on every boot. This made the old
`/root/conmap` + manual `screen` workflow break after every reboot.

**Fix:** udev rules pin each adapter by its **ID_PATH** (physical USB port
topology), which is stable across reboots regardless of enumeration order.
Each adapter gets a named symlink in `/dev/consoles/` that never changes.

The udev rules are generated from `mapping.txt`, which maps each adapter's
ID_PATH to a console name and TCP port. To re-map after physically moving
an adapter, update `mapping.txt` and re-run `setup.sh`.

**Fallback:** if udev trigger doesn't create symlinks for already-discovered
devices (common on first run), `setup.sh` creates them manually by matching
ID_PATH. On subsequent boots, udev creates them automatically.

## Port Assignments

| TCP Port | Console Name | ID_PATH | Description |
|----------|-------------|---------|-------------|
| 2001 | pfv-core-sw01 | usb-0:1.5.4.4 | Dell PowerConnect 5448 (core switch) |
| 2002 | pfv-tor3-mgmt | usb-0:1.6.3.1 | Rack 3 management TOR switch |
| 2003 | pfv-tor3-stor | usb-0:1.6.3.3.2 | Rack 3 storage TOR switch |
| 2004 | pfv-rrinfra-rtr | usb-0:1.6.3.3.1 | Cisco router (rrinfra) |
| 2005 | pfv-r2-tor-top | usb-0:1.6.3.3.3 | Rack 2 top-of-rack switch |
| 2006 | subodev-torsw | usb-0:1.5.4.1 | Suborbital device TOR switch |
| 2007 | pfv-r2-sw | usb-0:1.6.3.2 | Rack 2 old Dell switch |

TCP ports are used by the ser2net emergency config only. conman accesses
serial devices directly via `/dev/consoles/<name>` symlinks.

## Scripts

| Script | Purpose |
|--------|---------|
| [`mapping.txt`](mapping.txt) | Source of truth: TCP port ↔ ID_PATH ↔ name ↔ baud |
| [`generate-config.sh`](generate-config.sh) | Generates udev rules, ser2net.yaml, conman.conf from mapping.txt |
| [`setup.sh`](setup.sh) | Full deploy: generate configs, create symlinks, restart services |
| [`discover.sh`](discover.sh) | Read-only discovery of USB adapters, existing config, services |

## Usage

### Connect to a console

**Primary method — conman client (with logging + multiplexing):**

```bash
# From any Tailscale-connected workstation:
conman -d pfv-tsys4:7890 -f pfv-core-sw01     # connect to console
conman -d pfv-tsys4:7890 -q                    # list all consoles
```

Escape sequence: `&.` to disconnect, `&?` for help.

### Emergency Access

If conmand is down or you need direct serial access:

```bash
# Option A — direct screen on pfv-tsys4:
ssh pfv-tsys4 'systemctl stop conmand'
ssh pfv-tsys4 'screen /dev/consoles/pfv-core-sw01'
ssh pfv-tsys4 'systemctl start conmand'

# Option B — enable ser2net for TCP access:
ssh pfv-tsys4 'systemctl stop conmand && systemctl start ser2net'
telnet pfv-tsys4 2001                          # pfv-core-sw01
ssh pfv-tsys4 'systemctl stop ser2net && systemctl start conmand'
```

**Never run ser2net and conmand at the same time** — both compete for the
same serial devices.

### Re-deploy after changing mapping.txt

```bash
PROX_HOST=pfv-tsys4 bash tests/remote.sh prox 'bash /root/console/setup.sh'
```

### Find the ID_PATH for a new adapter

```bash
PROX_HOST=pfv-tsys4 bash tests/remote.sh prox-file console/discover.sh
```

Then match the new adapter's ID_PATH to its physical location and add a line
to `mapping.txt`.

## Files on pfv-tsys4

| File | Purpose |
|------|---------|
| `/etc/udev/rules.d/99-console-ports.rules` | Stable symlinks by ID_PATH |
| `/etc/ser2net.yaml` | ser2net config (EMERGENCY ONLY — disabled by default) |
| `/etc/conman.conf` | conman config (CONSOLE entries between markers) |
| `/etc/systemd/system/conmand.service` | systemd unit for conmand |
| `/root/console/mapping.txt` | Copy of the source-of-truth mapping |
| `/root/console/setup.sh` | Setup script (re-runnable) |
| `/root/console/generate-config.sh` | Config generator |

## Old workflow (replaced)

The old `/root/conmap` file and manual `screen` sessions are no longer
needed. The new setup is fully automated and survives reboots.