#!/bin/bash
###############################################################################
# probe-storage.sh
#
# READ-ONLY storage + disk ground-truth probe. Writes only stdout.
# Run on any Proxmox host (or any Linux NFS server) to inventory its physical
# disks, mounts, exports, SMART health, and Proxmox storage config.
#
# Portable: no hardcoded values. Uses only standard CLI tools + smartmontools.
#
# Usage (via tests/remote.sh):
#   PROX_HOST=pfv-tsys4 bash tests/remote.sh prox-file perf/scripts/probe-storage.sh
#
# Or directly on a host:
#   bash probe-storage.sh > storage-audit.txt
###############################################################################
set -u
echo "===== HOST: $(hostname -s)  $(date -u +%FT%TZ) ====="
echo
echo "##### lsblk (tree, with model/serial/size/type) #####"
lsblk -o NAME,MAJ:MIN,SIZE,TYPE,MOUNTPOINT,MODEL,SERIAL,STATE,ROTA,TRAN,REV 2>&1
echo
echo "##### block devices by-id #####"
for dev in /dev/disk/by-id/*; do
  [ -L "$dev" ] || continue
  case "$(basename "$dev")" in *part[0-9]*) continue;; esac
  ls -l "$dev"
done 2>&1
echo
echo "##### nvme list (if any) #####"
command -v nvme >/dev/null 2>&1 && nvme list 2>&1 || echo "(no nvme-cli or no nvme devices)"
echo
echo "##### blkid #####"
blkid 2>&1
echo
echo "##### mounted filesystems #####"
findmnt -o TARGET,SOURCE,FSTYPE,OPTIONS 2>&1
echo
echo "##### /etc/fstab #####"
cat /etc/fstab 2>&1
echo
echo "##### /etc/exports (+ exports.d) #####"
cat /etc/exports 2>&1
for f in /etc/exports.d/*.exports; do [ -f "$f" ] && echo "--- $f ---" && cat "$f"; done 2>&1
echo
echo "##### df -h (all mounts) #####"
df -h 2>&1
echo
echo "##### smartctl -a per block device #####"
command -v smartctl >/dev/null 2>&1 || echo "(smartctl not installed)"
for d in /dev/sd? /dev/nvme?n1; do
  [ -b "$d" ] || continue
  echo "----- smartctl -a $d -----"
  smartctl -a "$d" 2>&1 | grep -iE 'Device Model|Model Number|Serial|Firmware|User Capacity|Rotation Rate|Form Factor|SATA Version|NVMe|SMART overall|Reallocated|Pending|Uncorrect|Power On|Temperature|Media and Data Integrity' || true
done
echo
echo "##### /etc/pve/storage.cfg #####"
cat /etc/pve/storage.cfg 2>&1
echo
echo "##### pvesm status #####"
pvesm status 2>&1
echo
echo "##### pvesm list per store #####"
for s in $(pvesm status 2>/dev/null | awk 'NR>1 && $3>0 {print $1}'); do
  echo "--- pvesm list $s ---"
  pvesm list "$s" 2>&1 | head -40
done
echo
echo "##### zpool status (if any) #####"
command -v zpool >/dev/null 2>&1 && zpool status 2>&1 || echo "(no zfs)"
echo
echo "##### lvm: pvs/vgs/lvs #####"
command -v pvs >/dev/null 2>&1 && { pvs 2>&1; echo; vgs 2>&1; echo; lvs 2>&1; } || echo "(no lvm tools)"
echo
echo "===== END $(hostname -s) ====="