# Physical Systems (Pi's + other hardware)

> **Access patterns and locations for physical infrastructure devices.**
> Updated: 2026-07-31

## Raspberry Pi systems

All accessible via Tailscale. Use `localuser` (passwordless sudo to root)
except where noted.

| Name | Tailscale IP | LAN IP | Access | Purpose |
|------|-------------|--------|--------|---------|
| pfvsvrpi | 100.91.151.113 | 192.168.1.230 | `localuser` | Server Pi (general purpose) |
| subopi-dev-3 | 100.64.231.65 | 192.168.1.232 | via subodev jump | Suborbital dev Pi 3 |
| subopi-dev-4 | 100.65.224.85 | 192.168.1.231 | via subodev jump | Suborbital dev Pi 4 |

> **Note from operator:** "use subodev to get into subopi-*" — subodev is
> a jump host for the suborbital Pi's.

## Network devices discovered (non-Proxmox)

| IP | Device | Type | Identified via |
|----|--------|------|---------------|
| 192.168.0.12 | pfv-core-sw01 | Dell PowerConnect 5448 | SNMP |
| 192.168.0.7 | pfv-tor3-mgmt | Neyland 24T (PC5324) | SNMP |
| 192.168.0.8 | (unidentified) | Neyland 24T (PC5324) | SNMP |
| 192.168.0.9 | pfv-tor3-stor | Neyland 24T (PC5324) | SNMP |
| 192.168.1.166 | pfv-stor1 | Linux 4.14.22 (Synology?) | SNMP |
| 192.168.1.182 | UAP-AC-LR | UniFi AP (FW 6.8.2.15592) | SNMP |
| 192.168.1.230 | pfvsvrpi | Linux 6.12.62 (RPi) | SNMP |
| 192.168.1.231 | subopi-dev-4 | Linux 6.12.25 (RPi) | SNMP |
| 192.168.1.232 | subopi-dev-3 | Linux 6.12.9 (RPi) | SNMP |
| 192.168.1.217 | subopi3 | Linux 6.12.25 (RPi) | SNMP |

## Other identified hosts (SSH open, unidentified)

| IP | Notes |
|----|-------|
| 192.168.0.72 | SSH open, no SNMP — investigate |
| 192.168.0.250 | SSH open, no SNMP — investigate |
| 192.168.1.138 | SSH open — investigate |
| 192.168.1.181 | SSH open — investigate |
| 192.168.1.192 | SSH open — investigate |
| 192.168.1.201 | SSH open — investigate |
| 192.168.1.205 | SSH open — investigate |
| 192.168.1.214 | SSH open — investigate |
| 192.168.1.223 | SSH open — investigate |
| 192.168.1.226 | SSH open — investigate |
| 192.168.1.228 | SSH open — investigate |
| 192.168.2.5 | SSH open — investigate (tsys3 vmbr0) |
| 192.168.3.1 | SSH open — investigate (gateway/router?) |
| 192.168.3.78 | SSH open — investigate |

## 192.168.3.12-24 range

These 13 hosts respond to ping but have no SSH/SNMP. Likely:
- IoT devices
- Cameras
- Phones (VoIP)
- Other DHCP clients

## UniFi Access Points

| AP | Port (core-sw01) | Model | FW |
|----|-----------------|-------|-----|
| UAP-AC-LR | g9 (2902 inErrors!) | UAP-AC-LR | 6.8.2.15592 |
| UAP-AC-Lite | g38 (590 inErrors!) | UAP-AC-Lite | (unknown) |

Both managed by UniFi controller (likely on Home Assistant VM 100 or
pfv-stor1). UniPoller exports metrics to Prometheus.
