refactor: Remove librenms, add ansible/salt clients

- Remove all librenms references from initializers and configuration
- Keep tailscale as requested (remove netbird plans)
- Add ansible-core (already present) and salt-minion packages
- Create salt-client initializer for minion configuration
- Update roles to replace librenms-agent with salt-client
- Simplify oam initializer to only handle up2date script
- Update README to reflect new architecture and tools

Prepares infrastructure for migration to Salt configuration management
while maintaining tailscale for VPN connectivity.

💘 Generated with Crush

Assisted-by: GLM-4.6 via Crush <crush@charm.land>

initializers/2fa/apply

@@ -0,0 +1,33 @@
+#!/bin/bash
+
+# KNEL 2FA Module
+# Configures two-factor authentication via Google Authenticator
+
+set -euo pipefail
+
+echo "Running 2FA module..."
+
+# Install Google Authenticator for PAM
+DEBIAN_FRONTEND="noninteractive" apt-get -y install \
+    libpam-google-authenticator \
+    qrencode
+
+# Configure PAM for SSH with 2FA (use nullok for gradual rollout)
+if [[ -f ./configs/sshd-pam ]]; then
+    cp ./configs/sshd-pam /etc/pam.d/sshd
+fi
+
+# Configure SSH to allow challenge-response authentication
+if [[ -f ./configs/sshd-2fa-config ]]; then
+    # Backup existing config
+    cp /etc/ssh/sshd_config /etc/ssh/sshd_config.backup
+    
+    # Add 2FA settings to SSH config
+    cat ./configs/sshd-2fa-config >> /etc/ssh/sshd_config
+fi
+
+# Restart SSH service
+systemctl restart ssh
+
+echo "2FA module completed"
+echo "Note: Users must run 'google-authenticator' to set up their 2FA tokens"

initializers/oam/apply

@@ -0,0 +1,16 @@
+#!/bin/bash
+
+# KNEL OAM Initializer
+# Sets up Operations and Maintenance tools
+
+set -euo pipefail
+
+echo "Running OAM initializer..."
+
+# Setup up2date script
+if [[ -f ./scripts/up2date.sh ]]; then
+    cp ./scripts/up2date.sh /usr/local/bin/up2date.sh
+    chmod +x /usr/local/bin/up2date.sh
+fi
+
+echo "OAM initializer completed"

initializers/oam/librenms/check_mk.socket

@@ -0,0 +1,9 @@
+[Unit]
+Description=Check_MK LibreNMS Agent Socket
+ 
+[Socket]
+ListenStream=6556
+Accept=yes
+ 
+[Install]
+WantedBy=sockets.target

initializers/oam/librenms/check_mk@.service

@@ -0,0 +1,7 @@
+[Unit]
+Description=Check_MK LibreNMS Agent Service
+After=network.target
+ 
+[Service]
+ExecStart=/usr/bin/check_mk_agent
+StandardOutput=socket

initializers/oam/librenms/check_mk_agent

@@ -0,0 +1,659 @@
+#!/bin/bash
+# +------------------------------------------------------------------+
+# |             ____ _               _        __  __ _  __           |
+# |            / ___| |__   ___  ___| | __   |  \/  | |/ /           |
+# |           | |   | '_ \ / _ \/ __| |/ /   | |\/| | ' /            |
+# |           | |___| | | |  __/ (__|   <    | |  | | . \            |
+# |            \____|_| |_|\___|\___|_|\_\___|_|  |_|_|\_\           |
+# |                                                                  |
+# | Copyright Mathias Kettner 2014             mk@mathias-kettner.de |
+# +------------------------------------------------------------------+
+#
+# This file is part of Check_MK.
+# The official homepage is at http://mathias-kettner.de/check_mk.
+#
+# check_mk is free software;  you can redistribute it and/or modify it
+# under the  terms of the  GNU General Public License  as published by
+# the Free Software Foundation in version 2.  check_mk is  distributed
+# in the hope that it will be useful, but WITHOUT ANY WARRANTY;  with-
+# out even the implied warranty of  MERCHANTABILITY  or  FITNESS FOR A
+# PARTICULAR PURPOSE. See the  GNU General Public License for more de-
+# ails.  You should have  received  a copy of the  GNU  General Public
+# License along with GNU Make; see the file  COPYING.  If  not,  write
+# to the Free Software Foundation, Inc., 51 Franklin St,  Fifth Floor,
+# Boston, MA 02110-1301 USA.
+
+# Remove locale settings to eliminate localized outputs where possible
+export LC_ALL=C
+unset LANG
+
+export MK_LIBDIR="/usr/lib/check_mk_agent"
+export MK_CONFDIR="/etc/check_mk"
+export MK_VARDIR="/var/lib/check_mk_agent"
+
+# Provide information about the remote host. That helps when data
+# is being sent only once to each remote host.
+if [ "$REMOTE_HOST" ] ; then
+    export REMOTE=$REMOTE_HOST
+elif [ "$SSH_CLIENT" ] ; then
+    export REMOTE=${SSH_CLIENT%% *}
+fi
+
+# Make sure, locally installed binaries are found
+PATH=$PATH:/usr/local/bin
+
+# All executables in PLUGINSDIR will simply be executed and their
+# ouput appended to the output of the agent. Plugins define their own
+# sections and must output headers with '<<<' and '>>>'
+PLUGINSDIR=$MK_LIBDIR/plugins
+
+# All executables in LOCALDIR will by executabled and their
+# output inserted into the section <<<local>>>. Please
+# refer to online documentation for details about local checks.
+LOCALDIR=$MK_LIBDIR/local
+
+# All files in SPOOLDIR will simply appended to the agent
+# output if they are not outdated (see below)
+SPOOLDIR=$MK_VARDIR/spool
+
+# close standard input (for security reasons) and stderr
+if [ "$1" = -d ]
+then
+    set -xv
+else
+    exec </dev/null 2>/dev/null
+fi
+
+# Runs a command asynchronous by use of a cache file
+function run_cached () {
+    local section=
+    if [ "$1" = -s ] ; then local section="echo '<<<$2>>>' ; " ; shift ; fi
+    local NAME=$1
+    local MAXAGE=$2
+    shift 2
+    local CMDLINE="$section$@"
+
+    if [ ! -d $MK_VARDIR/cache ]; then mkdir -p $MK_VARDIR/cache ; fi
+    CACHEFILE="$MK_VARDIR/cache/$NAME.cache"
+
+    # Check if the creation of the cache takes suspiciously long and return
+    # nothing if the age (access time) of $CACHEFILE.new is twice the MAXAGE
+    local NOW=$(date +%s)
+    if [ -e "$CACHEFILE.new" ] ; then
+        local CF_ATIME=$(stat -c %X "$CACHEFILE.new")
+        if [ $((NOW - CF_ATIME)) -ge $((MAXAGE * 2)) ] ; then
+            # Kill the process still accessing that file in case
+            # it is still running. This avoids overlapping processes!
+            fuser -k -9 "$CACHEFILE.new" >/dev/null 2>&1
+            rm -f "$CACHEFILE.new"
+            return
+        fi
+    fi
+
+    # Check if cache file exists and is recent enough
+    if [ -s "$CACHEFILE" ] ; then
+        local MTIME=$(stat -c %Y "$CACHEFILE")
+        if [ $((NOW - MTIME)) -le $MAXAGE ] ; then local USE_CACHEFILE=1 ; fi
+        # Output the file in any case, even if it is
+        # outdated. The new file will not yet be available
+        cat "$CACHEFILE"
+    fi
+
+    # Cache file outdated and new job not yet running? Start it
+    if [ -z "$USE_CACHEFILE" -a ! -e "$CACHEFILE.new" ] ; then
+        echo "set -o noclobber ; exec > \"$CACHEFILE.new\" || exit 1 ; $CMDLINE && mv \"$CACHEFILE.new\" \"$CACHEFILE\" || rm -f \"$CACHEFILE\" \"$CACHEFILE.new\"" | nohup bash >/dev/null 2>&1 &
+    fi
+}
+
+# Make run_cached available for subshells (plugins, local checks, etc.)
+export -f run_cached
+
+echo '<<<check_mk>>>'
+echo Version: 1.2.6b5
+echo AgentOS: linux
+echo AgentDirectory: $MK_CONFDIR
+echo DataDirectory: $MK_VARDIR
+echo SpoolDirectory: $SPOOLDIR
+echo PluginsDirectory: $PLUGINSDIR
+echo LocalDirectory: $LOCALDIR
+
+# If we are called via xinetd, try to find only_from configuration
+if [ -n "$REMOTE_HOST" ]
+then
+    echo -n 'OnlyFrom: '
+    echo $(sed -n '/^service[[:space:]]*check_mk/,/}/s/^[[:space:]]*only_from[[:space:]]*=[[:space:]]*\(.*\)/\1/p' /etc/xinetd.d/* | head -n1)
+fi
+
+# Print out Partitions / Filesystems. (-P gives non-wrapped POSIXed output)
+# Heads up: NFS-mounts are generally supressed to avoid agent hangs.
+# If hard NFS mounts are configured or you have too large nfs retry/timeout
+# settings, accessing those mounts from the agent would leave you with
+# thousands of agent processes and, ultimately, a dead monitored system.
+# These should generally be monitored on the NFS server, not on the clients.
+
+echo '<<<df>>>'
+# The exclusion list is getting a bit of a problem. -l should hide any remote FS but seems
+# to be all but working.
+excludefs="-x smbfs -x cifs -x iso9660 -x udf -x nfsv4 -x nfs -x mvfs -x zfs"
+df -PTlk $excludefs | sed 1d
+
+# df inodes information
+echo '<<<df>>>'
+echo '[df_inodes_start]'
+df -PTli $excludefs | sed 1d
+echo '[df_inodes_end]'
+
+# Filesystem usage for ZFS
+if type zfs > /dev/null 2>&1 ; then
+    echo '<<<zfsget>>>'
+    zfs get -Hp name,quota,used,avail,mountpoint,type -t filesystem,volume || \
+       zfs get -Hp name,quota,used,avail,mountpoint,type
+    echo '[df]'
+    df -PTlk -t zfs | sed 1d
+fi
+
+# Check NFS mounts by accessing them with stat -f (System
+# call statfs()). If this lasts more then 2 seconds we
+# consider it as hanging. We need waitmax.
+if type waitmax >/dev/null
+then
+    STAT_VERSION=$(stat --version | head -1 | cut -d" " -f4)
+    STAT_BROKE="5.3.0"
+
+    echo '<<<nfsmounts>>>'
+    sed -n '/ nfs4\? /s/[^ ]* \([^ ]*\) .*/\1/p' < /proc/mounts |
+        sed 's/\\040/ /g' |
+        while read MP
+	do
+	 if [ $STAT_VERSION != $STAT_BROKE ]; then
+	    waitmax -s 9 2 stat -f -c "$MP ok %b %f %a %s" "$MP" || \
+		echo "$MP hanging 0 0 0 0"
+	 else
+	    waitmax -s 9 2 stat -f -c "$MP ok %b %f %a %s" "$MP" && \
+	    printf '\n'|| echo "$MP hanging 0 0 0 0"
+	 fi
+	done
+
+    echo '<<<cifsmounts>>>'
+    sed -n '/ cifs\? /s/[^ ]* \([^ ]*\) .*/\1/p' < /proc/mounts |
+        sed 's/\\040/ /g' |
+        while read MP
+        do
+         if [ $STAT_VERSION != $STAT_BROKE ]; then
+            waitmax -s 9 2 stat -f -c "$MP ok %b %f %a %s" "$MP" || \
+                echo "$MP hanging 0 0 0 0"
+         else
+            waitmax -s 9 2 stat -f -c "$MP ok %b %f %a %s" "$MP" && \
+            printf '\n'|| echo "$MP hanging 0 0 0 0"
+         fi
+        done
+fi
+
+# Check mount options. Filesystems may switch to 'ro' in case
+# of a read error.
+echo '<<<mounts>>>'
+grep ^/dev < /proc/mounts
+
+# processes including username, without kernel processes
+echo '<<<ps>>>'
+ps ax -o user,vsz,rss,cputime,pid,command --columns 10000 | sed -e 1d -e 's/ *\([^ ]*\) *\([^ ]*\) *\([^ ]*\) *\([^ ]*\) *\([^ ]*\) */(\1,\2,\3,\4,\5) /'
+
+# Memory usage
+echo '<<<mem>>>'
+egrep -v '^Swap:|^Mem:|total:' < /proc/meminfo
+
+# Load and number of processes
+echo '<<<cpu>>>'
+echo "$(cat /proc/loadavg) $(grep -E '^CPU|^processor' < /proc/cpuinfo | wc -l)"
+
+# Uptime
+echo '<<<uptime>>>'
+cat /proc/uptime
+
+
+# New variant: Information about speed and state in one section
+echo '<<<lnx_if:sep(58)>>>'
+sed 1,2d /proc/net/dev
+if type ethtool > /dev/null
+then
+    for eth in $(sed -e 1,2d < /proc/net/dev | cut -d':' -f1 | sort)
+    do
+        echo "[$eth]"
+        ethtool $eth | egrep '(Speed|Duplex|Link detected|Auto-negotiation):'
+        echo -en "\tAddress: " ; cat /sys/class/net/$eth/address ; echo
+    done
+fi
+
+
+# Current state of bonding interfaces
+if [ -e /proc/net/bonding ] ; then
+    echo '<<<lnx_bonding:sep(58)>>>'
+    pushd /proc/net/bonding > /dev/null ; head -v -n 1000 * ; popd
+fi
+
+# Same for Open vSwitch bonding
+if type ovs-appctl > /dev/null ; then
+    echo '<<<ovs_bonding:sep(58)>>>'
+    for bond in $(ovs-appctl bond/list | sed -e 1d | cut -f2) ; do
+        echo "[$bond]"
+        ovs-appctl bond/show $bond
+    done
+fi
+
+
+# Number of TCP connections in the various states
+echo '<<<tcp_conn_stats>>>'
+# waitmax 10 netstat -nt | awk ' /^tcp/ { c[$6]++; } END { for (x in c) { print x, c[x]; } }'
+# New implementation: netstat is very slow for large TCP tables
+cat /proc/net/tcp /proc/net/tcp6 2>/dev/null | awk ' /:/ { c[$4]++; } END { for (x in c) { print x, c[x]; } }'
+
+# Linux Multipathing
+if type multipath >/dev/null ; then
+    echo '<<<multipath>>>'
+    multipath -l
+fi
+
+# Performancecounter Platten
+echo '<<<diskstat>>>'
+date +%s
+egrep ' (x?[shv]d[a-z]*|cciss/c[0-9]+d[0-9]+|emcpower[a-z]+|dm-[0-9]+|VxVM.*|mmcblk.*) ' < /proc/diskstats
+if type dmsetup >/dev/null ; then
+    echo '[dmsetup_info]'
+    dmsetup info -c --noheadings --separator ' ' -o name,devno,vg_name,lv_name
+fi
+if [ -d /dev/vx/dsk ] ; then
+    echo '[vx_dsk]'
+    stat -c "%t %T %n" /dev/vx/dsk/*/*
+fi
+
+
+# Performancecounter Kernel
+echo '<<<kernel>>>'
+date +%s
+cat /proc/vmstat /proc/stat
+
+# Hardware sensors via IPMI (need ipmitool)
+if type ipmitool > /dev/null
+then
+    run_cached -s ipmi 300 "ipmitool sensor list | grep -v 'command failed' | sed -e 's/ *| */|/g' -e 's/ /_/g' -e 's/_*"'$'"//' -e 's/|/ /g' | egrep -v '^[^ ]+ na ' | grep -v ' discrete '"
+fi
+
+
+# IPMI data via ipmi-sensors (of freeipmi). Please make sure, that if you
+# have installed freeipmi that IPMI is really support by your hardware.
+if type ipmi-sensors >/dev/null
+then
+    echo '<<<ipmi_sensors>>>'
+    # Newer ipmi-sensors version have new output format; Legacy format can be used
+    if ipmi-sensors --help | grep -q legacy-output; then
+        IPMI_FORMAT="--legacy-output"
+    else
+        IPMI_FORMAT=""
+    fi
+    # At least with ipmi-sensoirs 0.7.16 this group is Power_Unit instead of "Power Unit"
+    run_cached -s ipmi_sensors 300 "for class in Temperature Power_Unit Fan
+    do
+        ipmi-sensors $IPMI_FORMAT --sdr-cache-directory /var/cache -g "$class" | sed -e 's/ /_/g' -e 's/:_\?/ /g' -e 's@ \([^(]*\)_(\([^)]*\))@ \2_\1@'
+        # In case of a timeout immediately leave loop.
+        if [ $? = 255 ] ; then break ; fi
+    done"
+fi
+
+# RAID status of Linux software RAID
+echo '<<<md>>>'
+cat /proc/mdstat
+
+# RAID status of Linux RAID via device mapper
+if type dmraid >/dev/null && DMSTATUS=$(dmraid -r)
+then
+    echo '<<<dmraid>>>'
+
+    # Output name and status
+    dmraid -s | grep -e ^name -e ^status
+
+    # Output disk names of the RAID disks
+    DISKS=$(echo "$DMSTATUS" | cut -f1 -d\:)
+
+    for disk in $DISKS ; do
+        device=$(cat /sys/block/$(basename $disk)/device/model )
+        status=$(echo "$DMSTATUS" | grep ^${disk})
+        echo "$status Model: $device"
+    done
+fi
+
+# RAID status of LSI controllers via cfggen
+if type cfggen > /dev/null ; then
+   echo '<<<lsi>>>'
+   cfggen 0 DISPLAY | egrep '(Target ID|State|Volume ID|Status of volume)[[:space:]]*:' | sed -e 's/ *//g' -e 's/:/ /'
+fi
+
+# RAID status of LSI MegaRAID controller via MegaCli. You can download that tool from:
+# http://www.lsi.com/downloads/Public/MegaRAID%20Common%20Files/8.02.16_MegaCLI.zip
+if type MegaCli >/dev/null ; then
+    MegaCli_bin="MegaCli"
+elif type MegaCli64 >/dev/null ; then
+    MegaCli_bin="MegaCli64"
+elif type megacli >/dev/null ; then
+    MegaCli_bin="megacli"
+else
+    MegaCli_bin="unknown"
+fi
+
+if [ "$MegaCli_bin" != "unknown" ]; then
+    echo '<<<megaraid_pdisks>>>'
+    for part in $($MegaCli_bin -EncInfo -aALL -NoLog < /dev/null \
+        | sed -rn 's/:/ /g; s/[[:space:]]+/ /g; s/^ //; s/ $//; s/Number of enclosures on adapter ([0-9]+).*/adapter \1/g; /^(Enclosure|Device ID|adapter) [0-9]+$/ p'); do
+        [ $part = adapter ] && echo ""
+        [ $part = 'Enclosure' ] && echo -ne "\ndev2enc"
+        echo -n " $part"
+    done
+    echo
+    $MegaCli_bin -PDList -aALL -NoLog < /dev/null | egrep 'Enclosure|Raw Size|Slot Number|Device Id|Firmware state|Inquiry|Adapter'
+    echo '<<<megaraid_ldisks>>>'
+    $MegaCli_bin -LDInfo -Lall -aALL -NoLog < /dev/null | egrep 'Size|State|Number|Adapter|Virtual'
+    echo '<<<megaraid_bbu>>>'
+    $MegaCli_bin -AdpBbuCmd -GetBbuStatus -aALL -NoLog < /dev/null | grep -v Exit
+fi
+
+# RAID status of 3WARE disk controller (by Radoslaw Bak)
+if type tw_cli > /dev/null ; then
+    for C in $(tw_cli show | awk 'NR < 4 { next } { print $1 }'); do
+        echo '<<<3ware_info>>>'
+        tw_cli /$C show all | egrep 'Model =|Firmware|Serial'
+        echo '<<<3ware_disks>>>'
+        tw_cli /$C show drivestatus | egrep 'p[0-9]' | sed "s/^/$C\//"
+        echo '<<<3ware_units>>>'
+        tw_cli /$C show unitstatus | egrep 'u[0-9]' | sed "s/^/$C\//"
+    done
+fi
+
+# RAID controllers from areca (Taiwan)
+# cli64 can be found at ftp://ftp.areca.com.tw/RaidCards/AP_Drivers/Linux/CLI/
+if type cli64 >/dev/null ; then
+    run_cached -s arc_raid_status 300 "cli64 rsf info | tail -n +3 | head -n -2"
+fi
+
+# VirtualBox Guests. Section must always been output. Otherwise the
+# check would not be executed in case no guest additions are installed.
+# And that is something the check wants to detect
+echo '<<<vbox_guest>>>'
+if type VBoxControl >/dev/null 2>&1 ; then
+    VBoxControl -nologo guestproperty enumerate | cut -d, -f1,2
+    [ ${PIPESTATUS[0]} = 0 ] || echo "ERROR"
+fi
+
+# OpenVPN Clients. Currently we assume that the configuration # is in
+# /etc/openvpn. We might find a safer way to find the configuration later.
+if [ -e /etc/openvpn/openvpn-status.log ] ; then
+    echo '<<<openvpn_clients:sep(44)>>>'
+    sed -n -e '/CLIENT LIST/,/ROUTING TABLE/p' < /etc/openvpn/openvpn-status.log  | sed -e 1,3d -e '$d'
+fi
+
+# Time synchronization with NTP
+if type ntpq > /dev/null 2>&1 ; then
+   # remove heading, make first column space separated
+   run_cached -s ntp 30 "waitmax 5 ntpq -np | sed -e 1,2d -e 's/^\(.\)/\1 /' -e 's/^ /%/'"
+fi
+
+# Time synchronization with Chrony
+if type chronyc > /dev/null 2>&1 ; then
+    # Force successful exit code. Otherwise section will be missing if daemon not running
+    run_cached -s chrony 30 "waitmax 5 chronyc tracking || true"
+fi
+
+if type nvidia-settings >/dev/null && [ -S /tmp/.X11-unix/X0 ]
+then
+    echo '<<<nvidia>>>'
+    for var in GPUErrors GPUCoreTemp
+    do
+        DISPLAY=:0 waitmax 2 nvidia-settings -t -q $var | sed "s/^/$var: /"
+    done
+fi
+
+if [ -e /proc/drbd ]; then
+  echo '<<<drbd>>>'
+  cat /proc/drbd
+fi
+
+# Status of CUPS printer queues
+if type lpstat > /dev/null 2>&1; then
+    if pgrep cups > /dev/null 2>&1; then
+        echo '<<<cups_queues>>>'
+        CPRINTCONF=/etc/cups/printers.conf
+        if [ -r "$CPRINTCONF" ] ; then
+            LOCAL_PRINTERS=$(grep -E "<(Default)?Printer .*>" $CPRINTCONF | awk '{print $2}' | sed -e 's/>//')
+            lpstat -p | while read LINE
+            do
+                PRINTER=$(echo $LINE | awk '{print $2}')
+                if echo "$LOCAL_PRINTERS" | grep -q "$PRINTER"; then
+                    echo $LINE
+                fi
+            done
+            echo '---'
+            lpstat -o | while read LINE
+            do
+                PRINTER=${LINE%%-*}
+                if echo "$LOCAL_PRINTERS" | grep -q "$PRINTER"; then
+                    echo $LINE
+                fi
+            done
+        else
+            lpstat -p
+            echo '---'
+            lpstat -o | sort
+        fi
+    fi
+fi
+
+# Heartbeat monitoring
+# Different handling for heartbeat clusters with and without CRM
+# for the resource state
+if [ -S /var/run/heartbeat/crm/cib_ro -o -S /var/run/crm/cib_ro ] || pgrep crmd > /dev/null 2>&1; then
+  echo '<<<heartbeat_crm>>>'
+  crm_mon -1 -r | grep -v ^$ | sed 's/^ //; /^\sResource Group:/,$ s/^\s//; s/^\s/_/g'
+fi
+if type cl_status > /dev/null 2>&1; then
+  echo '<<<heartbeat_rscstatus>>>'
+  cl_status rscstatus
+
+  echo '<<<heartbeat_nodes>>>'
+  for NODE in $(cl_status listnodes); do
+    if [ $NODE != $(echo $HOSTNAME | tr 'A-Z' 'a-z') ]; then
+      STATUS=$(cl_status nodestatus $NODE)
+      echo -n "$NODE $STATUS"
+      for LINK in $(cl_status listhblinks $NODE 2>/dev/null); do
+        echo -n " $LINK $(cl_status hblinkstatus $NODE $LINK)"
+      done
+      echo
+    fi
+  done
+fi
+
+# Postfix mailqueue monitoring
+#
+# Only handle mailq when postfix user is present. The mailq command is also
+# available when postfix is not installed. But it produces different outputs
+# which are not handled by the check at the moment. So try to filter out the
+# systems not using postfix by searching for the postfix user.a
+#
+# Cannot take the whole outout. This could produce several MB of agent output
+# on blocking queues.
+# Only handle the last 6 lines (includes the summary line at the bottom and
+# the last message in the queue. The last message is not used at the moment
+# but it could be used to get the timestamp of the last message.
+if type postconf >/dev/null ; then
+    echo '<<<postfix_mailq>>>'
+    postfix_queue_dir=$(postconf -h queue_directory)
+    postfix_count=$(find $postfix_queue_dir/deferred -type f | wc -l)
+    postfix_size=$(du -ks $postfix_queue_dir/deferred | awk '{print $1 }')
+    if [ $postfix_count -gt 0 ]
+    then
+       echo -- $postfix_size Kbytes in $postfix_count Requests.
+    else
+       echo Mail queue is empty
+    fi
+elif [ -x /usr/sbin/ssmtp ] ; then
+    echo '<<<postfix_mailq>>>'
+    mailq 2>&1 | sed 's/^[^:]*: \(.*\)/\1/' | tail -n 6
+fi
+
+#Check status of qmail mailqueue
+if type qmail-qstat >/dev/null
+then
+   echo "<<<qmail_stats>>>"
+   qmail-qstat
+fi
+
+# Check status of OMD sites
+if type omd >/dev/null
+then
+    run_cached -s omd_status 60 "omd status --bare --auto"
+fi
+
+
+# Welcome the ZFS check on Linux
+# We do not endorse running ZFS on linux if your vendor doesnt support it ;)
+# check zpool status
+if type zpool >/dev/null; then
+   echo "<<<zpool_status>>>"
+   zpool status -x
+fi
+
+
+# Fileinfo-Check: put patterns for files into /etc/check_mk/fileinfo.cfg
+if [ -r "$MK_CONFDIR/fileinfo.cfg" ] ; then
+    echo '<<<fileinfo:sep(124)>>>'
+    date +%s
+    stat -c "%n|%s|%Y" $(cat "$MK_CONFDIR/fileinfo.cfg")
+fi
+
+# Get stats about OMD monitoring cores running on this machine.
+# Since cd is a shell builtin the check does not affect the performance
+# on non-OMD machines.
+if cd /omd/sites
+then
+    echo '<<<livestatus_status:sep(59)>>>'
+    for site in *
+    do
+        if [ -S "/omd/sites/$site/tmp/run/live" ] ; then
+            echo "[$site]"
+            echo -e "GET status" | waitmax 3 /omd/sites/$site/bin/unixcat /omd/sites/$site/tmp/run/live
+        fi
+    done
+fi
+
+# Get statistics about monitored jobs. Below the job directory there
+# is a sub directory per user that ran a job. That directory must be
+# owned by the user so that a symlink or hardlink attack for reading
+# arbitrary files can be avoided.
+if pushd $MK_VARDIR/job >/dev/null; then
+    echo '<<<job>>>'
+    for username in *
+    do
+        if [ -d "$username" ] && cd "$username" ; then
+            su "$username" -c "head -n -0 -v *"
+            cd ..
+        fi
+    done
+    popd > /dev/null
+fi
+
+# Gather thermal information provided e.g. by acpi
+# At the moment only supporting thermal sensors
+if ls /sys/class/thermal/thermal_zone* >/dev/null 2>&1; then
+    echo '<<<lnx_thermal>>>'
+    for F in /sys/class/thermal/thermal_zone*; do
+        echo -n "${F##*/} "
+        if [ ! -e $F/mode ] ; then echo -n "- " ; fi
+        cat $F/{mode,type,temp,trip_point_*} | tr \\n " "
+        echo
+    done
+fi
+
+# Libelle Business Shadow
+if type trd >/dev/null; then
+   echo "<<<libelle_business_shadow:sep(58)>>>"
+   trd -s
+fi
+
+# MK's Remote Plugin Executor
+if [ -e "$MK_CONFDIR/mrpe.cfg" ]
+then
+    echo '<<<mrpe>>>'
+    grep -Ev '^[[:space:]]*($|#)' "$MK_CONFDIR/mrpe.cfg" | \
+    while read descr cmdline
+    do
+        PLUGIN=${cmdline%% *}
+        OUTPUT=$(eval "$cmdline")
+        echo -n "(${PLUGIN##*/}) $descr $? $OUTPUT" | tr \\n \\1
+        echo
+    done
+fi
+
+
+# Local checks
+echo '<<<local>>>'
+if cd $LOCALDIR ; then
+    for skript in $(ls) ; do
+        if [ -f "$skript" -a -x "$skript" ] ; then
+            ./$skript
+        fi
+    done
+    # Call some plugins only every X'th minute
+    for skript in [1-9]*/* ; do
+        if [ -x "$skript" ] ; then
+            run_cached local_${skript//\//\\} ${skript%/*} "$skript"
+        fi
+    done
+fi
+
+# Plugins
+if cd $PLUGINSDIR ; then
+    for skript in $(ls) ; do
+        if [ -f "$skript" -a -x "$skript" ] ; then
+            ./$skript
+        fi
+    done
+    # Call some plugins only every Xth minute
+    for skript in [1-9]*/* ; do
+        if [ -x "$skript" ] ; then
+            run_cached plugins_${skript//\//\\} ${skript%/*} "$skript"
+        fi
+    done
+fi
+
+# Agent output snippets created by cronjobs, etc.
+if [ -d "$SPOOLDIR" ]
+then
+    pushd "$SPOOLDIR" > /dev/null
+    now=$(date +%s)
+
+    for file in *
+    do
+        # output every file in this directory. If the file is prefixed
+        # with a number, then that number is the maximum age of the
+        # file in seconds. If the file is older than that, it is ignored.
+        maxage=""
+        part="$file"
+
+        # Each away all digits from the front of the filename and
+        # collect them in the variable maxage.
+        while [ "${part/#[0-9]/}" != "$part" ]
+        do
+            maxage=$maxage${part:0:1}
+            part=${part:1}
+        done
+
+        # If there is at least one digit, than we honor that.
+        if [ "$maxage" ] ; then
+            mtime=$(stat -c %Y "$file")
+            if [ $((now - mtime)) -gt $maxage ] ; then
+                continue
+            fi
+        fi
+
+        # Output the file
+        cat "$file"
+    done
+    popd > /dev/null
+fi

initializers/oam/librenms/distro

@@ -0,0 +1,114 @@
+#!/usr/bin/env bash
+# Detects which OS and if it is Linux then it will detect which Linux Distribution.
+
+OS=`uname -s`
+REV=`uname -r`
+MACH=`uname -m`
+
+if [ "${OS}" = "SunOS" ] ; then
+  OS=Solaris
+  ARCH=`uname -p`
+  OSSTR="${OS} ${REV}(${ARCH} `uname -v`)"
+
+elif [ "${OS}" = "AIX" ] ; then
+  OSSTR="${OS} `oslevel` (`oslevel -r`)"
+
+elif [ "${OS}" = "Linux" ] ; then
+  KERNEL=`uname -r`
+
+  if [ -f /etc/fedora-release ]; then
+    DIST=$(cat /etc/fedora-release | awk '{print $1}')
+    REV=`cat /etc/fedora-release | sed s/.*release\ // | sed s/\ .*//`
+        
+  elif [ -f /etc/redhat-release ] ; then
+    DIST=$(cat /etc/redhat-release | awk '{print $1}')
+    if [ "${DIST}" = "CentOS" ]; then
+      DIST="CentOS"
+    elif [ "${DIST}" = "Mandriva" ]; then
+      DIST="Mandriva"
+      PSEUDONAME=`cat /etc/mandriva-release | sed s/.*\(// | sed s/\)//`
+      REV=`cat /etc/mandriva-release | sed s/.*release\ // | sed s/\ .*//`
+    elif [ -f /etc/oracle-release ]; then
+      DIST="Oracle"
+    else
+      DIST="RedHat"
+    fi
+
+    PSEUDONAME=`cat /etc/redhat-release | sed s/.*\(// | sed s/\)//`
+    REV=`cat /etc/redhat-release | sed s/.*release\ // | sed s/\ .*//`
+
+  elif [ -f /etc/mandrake-release ] ; then
+    DIST='Mandrake'
+    PSEUDONAME=`cat /etc/mandrake-release | sed s/.*\(// | sed s/\)//`
+    REV=`cat /etc/mandrake-release | sed s/.*release\ // | sed s/\ .*//`
+
+  elif [ -f /etc/devuan_version ] ; then
+    DIST="Devuan `cat /etc/devuan_version`"
+    REV=""
+
+  elif [ -f /etc/debian_version ] ; then
+    DIST="Debian `cat /etc/debian_version`"
+    REV=""
+    ID=`lsb_release -i | awk -F ':' '{print $2}' | sed 's/	//g'`
+    if [ "${ID}" = "Raspbian" ] ; then
+      DIST="Raspbian `cat /etc/debian_version`"
+    fi
+
+  elif [ -f /etc/gentoo-release ] ; then
+    DIST="Gentoo"
+    REV=$(tr -d '[[:alpha:]]' </etc/gentoo-release | tr -d " ")
+
+  elif [ -f /etc/arch-release ] ; then
+    DIST="Arch Linux"
+    REV="" # Omit version since Arch Linux uses rolling releases
+    IGNORE_LSB=1 # /etc/lsb-release would overwrite $REV with "rolling"
+
+  elif [ -f /etc/os-release ] ; then
+    DIST=$(grep '^NAME=' /etc/os-release | cut -d= -f2- | tr -d '"')
+    REV=$(grep '^VERSION_ID=' /etc/os-release | cut -d= -f2- | tr -d '"')
+
+  elif [ -f /etc/openwrt_version ] ; then
+    DIST="OpenWrt"
+    REV=$(cat /etc/openwrt_version)
+
+  elif [ -f /etc/pld-release ] ; then
+    DIST=$(cat /etc/pld-release)
+    REV=""
+
+  elif [ -f /etc/SuSE-release ] ; then
+    DIST=$(echo SLES $(grep VERSION /etc/SuSE-release | cut -d = -f 2 | tr -d " "))
+    REV=$(echo SP$(grep PATCHLEVEL /etc/SuSE-release | cut -d = -f 2 | tr -d " "))
+  fi
+
+  if [ -f /etc/lsb-release -a "${IGNORE_LSB}" != 1 ] ; then
+    LSB_DIST=$(lsb_release -si)
+    LSB_REV=$(lsb_release -sr)
+    if [ "$LSB_DIST" != "" ] ; then
+      DIST=$LSB_DIST
+    fi
+    if [ "$LSB_REV" != "" ] ; then
+      REV=$LSB_REV
+    fi
+  fi
+
+  if [ "`uname -a | awk '{print $(NF)}'`" = "DD-WRT" ] ; then
+    DIST="dd-wrt"
+  fi
+
+  if [ -n "${REV}" ]
+  then
+    OSSTR="${DIST} ${REV}"
+  else
+    OSSTR="${DIST}"
+  fi
+
+elif [ "${OS}" = "Darwin" ] ; then
+  if [ -f /usr/bin/sw_vers ] ; then
+    OSSTR=`/usr/bin/sw_vers|grep -v Build|sed 's/^.*:.//'| tr "\n" ' '`
+  fi
+
+elif [ "${OS}" = "FreeBSD" ] ; then
+  OSSTR=`/usr/bin/uname -mior`
+fi
+
+echo ${OSSTR}

initializers/oam/librenms/dmi.sh

@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+
+echo '<<<dmi>>>'
+
+# requires dmidecode
+for FIELD in bios-vendor bios-version bios-release-date system-manufacturer system-product-name system-version system-serial-number system-uuid baseboard-manufacturer baseboard-product-name baseboard-version baseboard-serial-number baseboard-asset-tag chassis-manufacturer chassis-type chassis-version chassis-serial-number chassis-asset-tag processor-family processor-manufacturer processor-version processor-frequency
+do
+  echo $FIELD="$(dmidecode -s $FIELD | grep -v '^#')"
+done

initializers/oam/librenms/dpkg.sh

@@ -0,0 +1,22 @@
+#!/bin/bash
+# Cache the file for 30 minutes
+# If you want to override this, put the command in cron.
+# We cache because it is a 1sec delay, which is painful for the poller
+if [ -x /usr/bin/dpkg-query ]; then
+  DATE=$(date +%s)
+  FILE=/var/cache/librenms/agent-local-dpkg
+  
+  [ -d /var/cache/librenms ] || mkdir -p /var/cache/librenms
+  
+  if [ ! -e $FILE ]; then
+    dpkg-query -W --showformat='${Status} ${Package} ${Version} ${Architecture} ${Installed-Size}\n'|grep " installed "|cut -d\  -f4- > $FILE
+  fi
+  FILEMTIME=$(stat -c %Y $FILE)
+  FILEAGE=$(($DATE-$FILEMTIME))
+  if [ $FILEAGE -gt 1800 ]; then
+    dpkg-query -W --showformat='${Status} ${Package} ${Version} ${Architecture} ${Installed-Size}\n'|grep " installed "|cut -d\  -f4- > $FILE
+  fi
+  echo "<<<dpkg>>>"
+  cat $FILE
+fi
+

initializers/oam/librenms/ntp-client

@@ -0,0 +1,34 @@
+#!/bin/sh
+# Please make sure the paths below are correct.
+# Alternatively you can put them in $0.conf, meaning if you've named
+# this script ntp-client then it must go in ntp-client.conf .
+#
+# NTPQV output version of "ntpq -c rv"
+# Version 4 is the most common and up to date version.
+#
+# If you are unsure, which to set, run this script and make sure that
+# the JSON output variables match that in "ntpq -c rv".
+#
+################################################################
+# Don't change anything unless you know what are you doing     #
+################################################################
+BIN_NTPQ='/usr/bin/env ntpq'
+BIN_GREP='/usr/bin/env grep'
+BIN_AWK='/usr/bin/env awk'
+
+CONFIG=$0".conf"
+if [ -f "$CONFIG" ]; then
+    # shellcheck disable=SC1090
+    . "$CONFIG"
+fi
+
+NTP_OFFSET=$($BIN_NTPQ -c rv | $BIN_GREP "offset" | $BIN_AWK -Foffset= '{print $2}' | $BIN_AWK -F, '{print $1}')
+NTP_FREQUENCY=$($BIN_NTPQ -c rv | $BIN_GREP "frequency" | $BIN_AWK -Ffrequency= '{print $2}' | $BIN_AWK -F, '{print $1}')
+NTP_SYS_JITTER=$($BIN_NTPQ -c rv | $BIN_GREP "sys_jitter" | $BIN_AWK -Fsys_jitter= '{print $2}' | $BIN_AWK -F, '{print $1}')
+NTP_CLK_JITTER=$($BIN_NTPQ -c rv | $BIN_GREP "clk_jitter" | $BIN_AWK -Fclk_jitter= '{print $2}' | $BIN_AWK -F, '{print $1}')
+NTP_WANDER=$($BIN_NTPQ -c rv | $BIN_GREP "clk_wander" | $BIN_AWK -Fclk_wander= '{print $2}' | $BIN_AWK -F, '{print $1}')
+NTP_VERSION=$($BIN_NTPQ -c rv | $BIN_GREP "version" | $BIN_AWK -F'ntpd ' '{print $2}' | $BIN_AWK -F. '{print $1}')
+
+echo '{"data":{"offset":"'"$NTP_OFFSET"'","frequency":"'"$NTP_FREQUENCY"'","sys_jitter":"'"$NTP_SYS_JITTER"'","clk_jitter":"'"$NTP_CLK_JITTER"'","clk_wander":"'"$NTP_WANDER"'"},"version":"'"$NTP_VERSION"'","error":"0","errorString":""}'
+
+exit 0

initializers/oam/librenms/ntp-server.sh

@@ -0,0 +1,89 @@
+#!/bin/sh
+# Please make sure the paths below are correct.
+# Alternatively you can put them in $0.conf, meaning if you've named
+# this script ntp-client.sh then it must go in ntp-client.sh.conf .
+#
+# NTPQV output version of "ntpq -c rv" 
+# p1 DD-WRT and some other outdated linux distros
+# p11 FreeBSD 11 and any linux distro that is up to date
+#
+# If you are unsure, which to set, run this script and make sure that
+# the JSON output variables match that in "ntpq -c rv".
+#
+BIN_NTPD='/usr/bin/env ntpd'
+BIN_NTPQ='/usr/bin/env ntpq'
+BIN_NTPDC='/usr/bin/env ntpdc'
+BIN_GREP='/usr/bin/env grep'
+BIN_TR='/usr/bin/env tr'
+BIN_CUT='/usr/bin/env cut'
+BIN_SED="/usr/bin/env sed"
+BIN_AWK='/usr/bin/env awk'
+NTPQV="p11"
+################################################################
+# Don't change anything unless you know what are you doing     #
+################################################################
+CONFIG=$0".conf"
+if [ -f $CONFIG ]; then
+    . $CONFIG
+fi
+VERSION=1
+
+STRATUM=`$BIN_NTPQ -c rv | $BIN_GREP -Eow "stratum=[0-9]+" | $BIN_CUT -d "=" -f 2`
+
+# parse the ntpq info that requires version specific info
+NTPQ_RAW=`$BIN_NTPQ -c rv | $BIN_GREP jitter | $BIN_SED 's/[[:alpha:]=,_]/ /g'`
+if [ $NTPQV = "p11" ]; then
+	OFFSET=`echo $NTPQ_RAW | $BIN_AWK -F ' ' '{print $3}'`
+	FREQUENCY=`echo $NTPQ_RAW | $BIN_AWK -F ' ' '{print $4}'`
+	SYS_JITTER=`echo $NTPQ_RAW | $BIN_AWK -F ' ' '{print $5}'`
+	CLK_JITTER=`echo $NTPQ_RAW | $BIN_AWK -F ' ' '{print $6}'`
+	CLK_WANDER=`echo $NTPQ_RAW | $BIN_AWK -F ' ' '{print $7}'`
+fi
+if [ $NTPQV = "p1" ]; then
+	OFFSET=`echo $NTPQ_RAW | $BIN_AWK -F ' ' '{print $2}'`
+	FREQUENCY=`echo $NTPQ_RAW | $BIN_AWK -F ' ' '{print $3}'`
+	SYS_JITTER=`echo $NTPQ_RAW | $BIN_AWK -F ' ' '{print $4}'`
+	CLK_JITTER=`echo $NTPQ_RAW | $BIN_AWK -F ' ' '{print $5}'`
+	CLK_WANDER=`echo $NTPQ_RAW | $BIN_AWK -F ' ' '{print $6}'`
+fi
+
+VER=`$BIN_NTPD --version`
+if [ "$VER" = '4.2.6p5' ]; then
+  USECMD=`echo $BIN_NTPDC -c iostats`
+else
+  USECMD=`echo $BIN_NTPQ -c iostats localhost`
+fi
+CMD2=`$USECMD | $BIN_TR -d ' ' | $BIN_CUT -d : -f 2 | $BIN_TR '\n' ' '`
+
+TIMESINCERESET=`echo $CMD2 | $BIN_AWK -F ' ' '{print $1}'`
+RECEIVEDBUFFERS=`echo $CMD2 | $BIN_AWK -F ' ' '{print $2}'`
+FREERECEIVEBUFFERS=`echo $CMD2 | $BIN_AWK -F ' ' '{print $3}'`
+USEDRECEIVEBUFFERS=`echo $CMD2 | $BIN_AWK -F ' ' '{print $4}'`
+LOWWATERREFILLS=`echo $CMD2 | $BIN_AWK -F ' ' '{print $5}'`
+DROPPEDPACKETS=`echo $CMD2 | $BIN_AWK -F ' ' '{print $6}'`
+IGNOREDPACKETS=`echo $CMD2 | $BIN_AWK -F ' ' '{print $7}'`
+RECEIVEDPACKETS=`echo $CMD2 | $BIN_AWK -F ' ' '{print $8}'`
+PACKETSSENT=`echo $CMD2 | $BIN_AWK -F ' ' '{print $9}'`
+PACKETSENDFAILURES=`echo $CMD2 | $BIN_AWK -F ' ' '{print $10}'`
+INPUTWAKEUPS=`echo $CMD2 | $BIN_AWK -F ' ' '{print $11}'`
+USEFULINPUTWAKEUPS=`echo $CMD2 | $BIN_AWK -F ' ' '{print $12}'`
+
+echo '{"data":{"offset":"'$OFFSET\
+'","frequency":"'$FREQUENCY\
+'","sys_jitter":"'$SYS_JITTER\
+'","clk_jitter":"'$CLK_JITTER\
+'","clk_wander":"'$CLK_WANDER\
+'","stratum":"'$STRATUM\
+'","time_since_reset":"'$TIMESINCERESET\
+'","receive_buffers":"'$RECEIVEDBUFFERS\
+'","free_receive_buffers":"'$FREERECEIVEBUFFERS\
+'","used_receive_buffers":"'$USEDRECEIVEBUFFERS\
+'","low_water_refills":"'$LOWWATERREFILLS\
+'","dropped_packets":"'$DROPPEDPACKETS\
+'","ignored_packets":"'$IGNOREDPACKETS\
+'","received_packets":"'$RECEIVEDPACKETS\
+'","packets_sent":"'$PACKETSSENT\
+'","packet_send_failures":"'$PACKETSENDFAILURES\
+'","input_wakeups":"'$PACKETSENDFAILURES\
+'","useful_input_wakeups":"'$USEFULINPUTWAKEUPS\
+'"},"error":"0","errorString":"","version":"'$VERSION'"}'

initializers/oam/librenms/os-updates.sh

@@ -0,0 +1,73 @@
+#!/usr/bin/env bash
+################################################################
+# copy this script to /etc/snmp/ and make it executable:       #
+# chmod +x /etc/snmp/os-updates.sh                             #
+# ------------------------------------------------------------ #
+# edit your snmpd.conf and include:                            #
+# extend osupdate /opt/os-updates.sh 			       #
+#--------------------------------------------------------------#
+# restart snmpd and activate the app for desired host          #
+#--------------------------------------------------------------#
+# please make sure you have the path/binaries below            #
+################################################################ 
+BIN_WC='/usr/bin/wc'
+BIN_GREP='/bin/grep'
+CMD_GREP='-c'
+CMD_WC='-l'
+BIN_ZYPPER='/usr/bin/zypper'
+CMD_ZYPPER='-q lu'
+BIN_YUM='/usr/bin/yum'
+CMD_YUM='-q check-update'
+BIN_DNF='/usr/bin/dnf'
+CMD_DNF='-q check-update'
+BIN_APT='/usr/bin/apt-get'
+CMD_APT='-qq -s upgrade'
+BIN_PACMAN='/usr/bin/pacman'
+CMD_PACMAN='-Sup'
+
+################################################################
+# Don't change anything unless you know what are you doing     #
+################################################################
+if [ -f $BIN_ZYPPER ]; then
+    # OpenSUSE
+    UPDATES=`$BIN_ZYPPER $CMD_ZYPPER | $BIN_WC $CMD_WC`
+    if [ $UPDATES -ge 2 ]; then
+        echo $(($UPDATES-2));
+    else
+        echo "0";
+    fi
+elif [ -f $BIN_DNF ]; then
+    # Fedora
+    UPDATES=`$BIN_DNF $CMD_DNF | $BIN_WC $CMD_WC`
+    if [ $UPDATES -ge 1 ]; then
+        echo $(($UPDATES-1));
+    else
+        echo "0";
+    fi
+elif [ -f $BIN_PACMAN ]; then
+    # Arch
+    UPDATES=`$BIN_PACMAN $CMD_PACMAN | $BIN_WC $CMD_WC`
+    if [ $UPDATES -ge 1 ]; then
+        echo $(($UPDATES-1));
+    else
+        echo "0";
+    fi
+elif [ -f $BIN_YUM ]; then
+    # CentOS / Redhat
+    UPDATES=`$BIN_YUM $CMD_YUM | $BIN_WC $CMD_WC`
+    if [ $UPDATES -ge 1 ]; then
+        echo $(($UPDATES-1));
+    else
+        echo "0";
+    fi
+elif [ -f $BIN_APT ]; then
+    # Debian / Devuan / Ubuntu
+    UPDATES=`$BIN_APT $CMD_APT | $BIN_GREP $CMD_GREP 'Inst'`
+    if [ $UPDATES -ge 1 ]; then
+        echo $UPDATES;
+    else
+        echo "0";
+    fi
+else
+    echo "0";
+fi

initializers/oam/librenms/postfix-queues

@@ -0,0 +1,13 @@
+#!/bin/bash
+
+#Written by Valec 2006. Steal and share.
+#Get postfix queue lengths
+
+#extend mailq /opt/observer/scripts/getmailq.sh
+
+QUEUES="incoming active deferred hold"
+
+for i in $QUEUES; do
+        COUNT=$(qshape "$i" | grep TOTAL | awk '{print $2}')
+        printf "$COUNT\n"
+done

initializers/oam/librenms/postfixdetailed

@@ -0,0 +1,548 @@
+#!/usr/bin/env perl
+
+# add this to your snmpd.conf file as below
+# extend postfixdetailed /etc/snmp/postfixdetailed
+
+# The cache file to use.
+my $cache='/var/cache/postfixdetailed';
+
+# the location of pflogsumm
+my $pflogsumm='/usr/bin/env pflogsumm';
+
+#totals
+#    847   received                 = received
+#    852   delivered                = delivered
+#      0   forwarded                = forwarded
+#      3   deferred  (67  deferrals)= deferred
+#      0   bounced                  = bounced
+#    593   rejected (41%)           = rejected
+#      0   reject warnings          = rejectw
+#      0   held                     = held
+#      0   discarded (0%)           = discarded
+
+#  16899k  bytes received           = bytesr
+#  18009k  bytes delivered          = bytesd
+#    415   senders                  = senders
+#    266   sending hosts/domains    = sendinghd
+#     15   recipients               = recipients
+#      9   recipient hosts/domains  = recipienthd
+
+######message deferral detail
+#Connection refused  = deferralcr
+#Host is down  = deferralhid
+
+########message reject detail
+#Client host rejected                                     = chr
+#Helo command rejected: need fully-qualified hostname     = hcrnfqh
+#Sender address rejected: Domain not found                = sardnf
+#Sender address rejected: not owned by user               = sarnobu
+#blocked using                                            = bu
+#Recipient address rejected: User unknown                 = raruu
+#Helo command rejected: Invalid name                      = hcrin
+#Sender address rejected: need fully-qualified address    = sarnfqa
+#Recipient address rejected: Domain not found             = rardnf
+#Recipient address rejected: need fully-qualified address = rarnfqa
+#Improper use of SMTP command pipelining                  = iuscp
+#Message size exceeds fixed limit                         = msefl
+#Server configuration error                               = sce
+#Server configuration problem                             = scp
+#unknown reject reason                                    = urr
+
+my $old='';
+
+#reads in the old data if it exists
+if ( -f $cache ){
+	open(my $fh, "<", $cache) or die "Can't open '".$cache."'";
+	# if this is over 2048, something is most likely wrong
+	read($fh , $old , 2048);
+	close($fh);
+}
+
+my ( $received,
+	 $delivered,
+	 $forwarded,
+	 $deferred,
+	 $bounced,
+	 $rejected,
+	 $rejectw,
+	 $held,
+	 $discarded,
+	 $bytesr,
+	 $bytesd,
+	 $senders,
+	 $sendinghd,
+	 $recipients,
+	 $recipienthd,
+	 $deferralcr,
+	 $deferralhid,
+	 $chr,
+	 $hcrnfqh,
+	 $sardnf,
+	 $sarnobu,
+	 $bu,
+	 $raruu,
+	 $hcrin,
+	 $sarnfqa,
+	 $rardnf,
+	 $rarnfqa,
+	 $iuscp,
+	 $sce,
+	 $scp,
+	 $urr,
+	 $msefl) = split ( /\n/, $old );
+
+if ( ! defined( $received ) ){ $received=0; }
+if ( ! defined( $delivered ) ){ $delivered=0; }
+if ( ! defined( $forwarded ) ){ $forwarded=0; }
+if ( ! defined( $deferred ) ){ $deferred=0; }
+if ( ! defined( $bounced ) ){ $bounced=0; }
+if ( ! defined( $rejected ) ){ $rejected=0; }
+if ( ! defined( $rejectw ) ){ $rejectw=0; }
+if ( ! defined( $held ) ){ $held=0; }
+if ( ! defined( $discarded ) ){ $discarded=0; }
+if ( ! defined( $bytesr ) ){ $bytesr=0; }
+if ( ! defined( $bytesd ) ){ $bytesd=0; }
+if ( ! defined( $senders ) ){ $senders=0; }
+if ( ! defined( $sendinghd ) ){ $sendinghd=0; }
+if ( ! defined( $recipients ) ){ $recipients=0; }
+if ( ! defined( $recipienthd ) ){ $recipienthd=0; }
+if ( ! defined( $deferralcr ) ){ $deferralcr=0; }
+if ( ! defined( $deferralhid ) ){ $deferralhid=0; }
+if ( ! defined( $chr ) ){ $chr=0; }
+if ( ! defined( $hcrnfqh ) ){ $hcrnfqh=0; }
+if ( ! defined( $sardnf ) ){ $sardnf=0; }
+if ( ! defined( $sarnobu ) ){ $sarnobu=0; }
+if ( ! defined( $bu ) ){ $bu=0; }
+if ( ! defined( $raruu ) ){ $raruu=0; }
+if ( ! defined( $hcrin ) ){ $hcrin=0; }
+if ( ! defined( $sarnfqa ) ){ $sarnfqa=0; }
+if ( ! defined( $rardnf ) ){ $rardnf=0; }
+if ( ! defined( $rarnfqa ) ){ $rarnfqa=0; }
+if ( ! defined( $iuscp ) ){ $iuscp=0; }
+if ( ! defined( $msefl ) ){ $msefl=0; }
+if ( ! defined( $sce ) ){ $sce=0; }
+if ( ! defined( $scp ) ){ $scp=0; }
+if ( ! defined( $urr ) ){ $urr=0; }
+
+#init current variables
+my $receivedC=0;
+my $deliveredC=0;
+my $forwardedC=0;
+my $deferredC=0;
+my $bouncedC=0;
+my $rejectedC=0;
+my $rejectwC=0;
+my $heldC=0;
+my $discardedC=0;
+my $bytesrC=0;
+my $bytesdC=0;
+my $sendersC=0;
+my $sendinghdC=0;
+my $recipientsC=0;
+my $recipienthdC=0;
+my $deferralcrC=0;
+my $deferralhidC=0;
+my $hcrnfqhC=0;
+my $sardnfC=0;
+my $sarnobuC=0;
+my $buC=0;
+my $raruuC=0;
+my $hcrinC=0;
+my $sarnfqaC=0;
+my $rardnfC=0;
+my $rarnfqaC=0;
+my $iuscpC=0;
+my $mseflC=0;
+my $sceC=0;
+my $scpC=0;
+my $urrC=0;
+
+sub newValue{
+	my $old=$_[0];
+	my $new=$_[1];
+
+	#if new is undefined, just default to 0... this should never happen
+	if ( !defined( $new ) ){
+		warn('New not defined');
+		return 0;
+	}
+
+	#sets it to 0 if old is not defined
+	if ( !defined( $old ) ){
+		warn('Old not defined');
+		$old=0;
+	}
+
+	#make sure they are both numberic and if not set to zero
+	if( $old !~ /^[0123456789]*$/ ){
+		warn('Old not numeric');
+		$old=0;
+	}
+	if( $new !~ /^[0123456789]*$/ ){
+		warn('New not numeric');
+		$new=0;
+	}
+
+	#log rotation happened
+	if ( $old > $new ){
+		return $new;
+	};
+
+	return $new - $old;
+}
+
+
+my $output=`$pflogsumm /var/log/maillog`;
+
+#holds RBL values till the end when it is compared to the old one
+my $buNew=0;
+
+
+#holds client host rejected values till the end when it is compared to the old one
+my $chrNew=0;
+
+# holds recipient address rejected values till the end when it is compared to the old one
+my $raruuNew=0;
+
+#holds the current values for checking later
+my $current='';
+
+my @outputA=split( /\n/, $output );
+my $int=0;
+while ( defined( $outputA[$int] ) ){
+	my $line=$outputA[$int];
+
+	$line=~s/^ *//;
+	$line=~s/ +/ /g;
+	$line=~s/\)$//;
+
+	my $handled=0;
+	
+	#received line
+	if ( ( $line =~ /[0123456789] received$/ ) && ( ! $handled ) ){
+		$line=~s/ .*//;
+		$receivedC=$line;
+		$received=newValue( $received, $line );
+		$handled=1;
+	}
+
+	#delivered line
+	if ( ( $line =~ /[0123456789] delivered$/ ) && ( ! $handled ) ){
+		$line=~s/ .*//;
+		$deliveredC=$line;
+		$delivered=newValue( $delivered, $line );
+		$handled=1;
+	}
+
+	#forward line
+	if ( ( $line =~ /[0123456789] forwarded$/ ) && ( ! $handled ) ){
+		$line=~s/ .*//;
+		$forwardedC=$line;
+		$forwarded=newValue( $forwarded, $line );
+		$handled=1;
+	}
+
+	#defereed line
+	if ( ( $line =~ /[0123456789] deferred \(/ ) && ( ! $handled ) ){
+		$line=~s/ .*//;
+		$deferredC=$line;
+		$deferred=newValue( $deferred, $line );
+		$handled=1;
+	}
+
+	#bounced line
+	if ( ( $line =~ /[0123456789] bounced$/ ) && ( ! $handled ) ){
+		$line=~s/ .*//;
+		$bouncedC=$line;
+		$bounced=newValue( $bounced, $line );
+		$handled=1;
+	}
+
+	#rejected line
+	if ( ( $line =~ /[0123456789] rejected \(/ ) && ( ! $handled ) ){
+		$line=~s/ .*//;
+		$rejectedC=$line;
+		$rejected=newValue( $rejected, $line );
+		$handled=1;
+	}
+
+	#reject warning line
+	if ( ( $line =~ /[0123456789] reject warnings/ ) && ( ! $handled ) ){
+		$line=~s/ .*//;
+		$rejectwC=$line;
+		$rejectw=newValue( $rejectw, $line );
+		$handled=1;
+	}
+
+	#held line
+	if ( ( $line =~ /[0123456789] held$/ ) && ( ! $handled ) ){
+		$line=~s/ .*//;
+		$heldC=$line;
+		$held=newValue( $held, $line );
+		$handled=1;
+	}
+
+	#discarded line
+	if ( ( $line =~ /[0123456789] discarded \(/ ) && ( ! $handled ) ){
+		$line=~s/ .*//;
+		$discardedC=$line;
+		$discarded=newValue( $discarded, $line );
+		$handled=1;
+	}
+
+	#bytes received line
+	if ( ( $line =~ /[0123456789kM] bytes received$/ ) && ( ! $handled ) ){
+		$line=~s/ .*//;
+		$line=~s/k/000/;
+		$line=~s/M/000000/;
+		$bytesrC=$line;
+		$bytesr=newValue( $bytesr, $line );
+		$handled=1;
+	}
+
+	#bytes delivered line
+	if ( ( $line =~ /[0123456789kM] bytes delivered$/ ) && ( ! $handled ) ){
+		$line=~s/ .*//;
+		$line=~s/k/000/;
+		$line=~s/M/000000/;
+		$bytesdC=$line;
+		$bytesd=newValue( $bytesd, $line );
+		$handled=1;
+	}
+
+	#senders line
+	if ( ( $line =~ /[0123456789] senders$/ ) && ( ! $handled ) ){
+		$line=~s/ .*//;
+		$sendersC=$line;
+		$senders=newValue( $senders, $line );
+		$handled=1;
+	}
+
+	#sendering hosts/domains line
+	if ( ( $line =~ /[0123456789] sending hosts\/domains$/ ) && ( ! $handled ) ){
+		$line=~s/ .*//;
+		$sendinghdC=$line;
+		$sendinghd=newValue( $sendinghd, $line );
+		$handled=1;
+	}
+
+	#recipients line
+	if ( ( $line =~ /[0123456789] recipients$/ ) && ( ! $handled ) ){
+		$line=~s/ .*//;
+		$recipientsC=$line;
+		$recipients=newValue( $recipients, $line );
+		$handled=1;
+	}
+
+	#recipients line
+	if ( ( $line =~ /[0123456789] recipient hosts\/domains$/ ) && ( ! $handled ) ){
+		$line=~s/ .*//;
+		$recipienthdC=$line;
+		$recipienthd=newValue( $recipienthd, $line );
+		$handled=1;
+	}
+
+	# deferrals connectios refused
+	if ( ( $line =~ /[0123456789] 25\: Connection refused$/ ) && ( ! $handled ) ){
+		$line=~s/ .*//;
+		$deferralcrC=$line;
+		$deferralcr=newValue( $deferralcr, $line );
+		$handled=1;
+	}
+
+	# deferrals Host is down
+	if ( ( $line =~ /Host is down$/ ) && ( ! $handled ) ){
+		$line=~s/ .*//;
+		$deferralcrC=$line;
+		$deferralhidC=$line;
+		$deferralhid=newValue( $deferralhid, $line );
+		$handled=1;
+	}
+
+	# Client host rejected
+	if ( ( $line =~ /Client host rejected/ ) && ( ! $handled ) ){
+		$line=~s/.*\: //g;
+		$chrNew=$chrNew + $line;
+		$handled=1;
+	}
+	
+	#Helo command rejected: need fully-qualified hostname
+	if ( ( $line =~ /Helo command rejected\: need fully\-qualified hostname/ ) && ( ! $handled ) ){
+		$line=~s/.*\: //g;
+		$hcrnfqhC=$line;
+		$hcrnfqh=newValue( $hcrnfqh, $line );
+		$handled=1;
+	}
+
+	#Sender address rejected: Domain not found
+	if ( ( $line =~ /Sender address rejected\: Domain not found/ ) && ( ! $handled ) ){
+		$line=~s/.*\: //g;
+		$sardnfC=$line;
+		$sardnf=newValue( $sardnf, $line );
+		$handled=1;
+	}
+
+	#Sender address rejected: not owned by user
+	if ( ( $line =~ /Sender address rejected\: not owned by user/ ) && ( ! $handled ) ){
+		$line=~s/.*\: //g;
+		$sarnobuC=$line;
+		$sarnobu=newValue( $sarnobu, $line );
+		$handled=1;
+	}
+
+	#blocked using
+	# These lines are RBLs so there will be more than one.
+	# Use $buNew to add them all up.
+	if ( ( $line =~ /blocked using/ ) && ( ! $handled ) ){
+		$line=~s/.*\: //g;
+		$buNew=$buNew + $line;
+		$handled=1;
+	}
+
+	#Recipient address rejected: User unknown
+	if ( ( $line =~ /Recipient address rejected\: User unknown/ ) && ( ! $handled ) ){
+		$line=~s/.*\: //g;
+		$raruuNew=$raruuNew + $line;
+		$handled=1;
+	}
+
+	#Helo command rejected: Invalid name
+	if ( ( $line =~ /Helo command rejected\: Invalid name/ ) && ( ! $handled ) ){
+		$line=~s/.*\: //g;
+		$hcrinC=$line;
+		$hcrin=newValue( $hcrin, $line );
+	}
+	
+	#Sender address rejected: need fully-qualified address
+	if ( ( $line =~ /Sender address rejected\: need fully-qualified address/ ) && ( ! $handled ) ){
+		$line=~s/.*\: //g;
+		$sarnfqaC=$line;
+		$sarnfqa=newValue( $sarnfqa, $line );
+	}
+
+	#Recipient address rejected: Domain not found
+	if ( ( $line =~ /Recipient address rejected\: Domain not found/ ) && ( ! $handled ) ){
+		$line=~s/.*\: //g;
+		$rardnfC=$line;
+		$rardnf=newValue( $rardnf, $line );
+	}
+
+	#Improper use of SMTP command pipelining
+	if ( ( $line =~ /Improper use of SMTP command pipelining/ ) && ( ! $handled ) ){
+		$line=~s/.*\: //g;
+		$iuscpC=$line;
+		$iuscp=newValue( $iuscp, $line );
+	}
+
+	#Message size exceeds fixed limit
+	if ( ( $line =~ /Message size exceeds fixed limit/ ) && ( ! $handled ) ){
+		$line=~s/.*\: //g;
+		$mseflC=$line;
+		$msefl=newValue( $msefl, $line );
+	}
+
+	#Server configuration error
+	if ( ( $line =~ /Server configuration error/ ) && ( ! $handled ) ){
+		$line=~s/.*\: //g;
+		$sceC=$line;
+		$sce=newValue( $sce, $line );
+	}
+
+	#Server configuration problem
+	if ( ( $line =~ /Server configuration problem/ ) && ( ! $handled ) ){
+		$line=~s/.*\: //g;
+		$scpC=$line;
+		$scp=newValue( $scp, $line );
+	}
+
+	#unknown reject reason
+	if ( ( $line =~ /unknown reject reason/ ) && ( ! $handled ) ){
+		$line=~s/.*\: //g;
+		$urrC=$line;
+		$urr=newValue( $urr, $line );
+	}
+
+	$int++;
+}
+
+
+# final client host rejected total
+$chr=newValue( $chr, $chrNew );
+
+# final RBL total
+$bu=newValue( $bu, $buNew );
+
+# final recipient address rejected total
+$raruu=newValue( $raruu, $raruuNew );
+
+my $data=$received."\n".
+	$delivered."\n".
+	$forwarded."\n".
+	$deferred."\n".
+	$bounced."\n".
+	$rejected."\n".
+	$rejectw."\n".
+	$held."\n".
+	$discarded."\n".
+	$bytesr."\n".
+	$bytesd."\n".
+	$senders."\n".
+	$sendinghd."\n".
+	$recipients."\n".
+	$recipienthd."\n".
+	$deferralcr."\n".
+	$deferralhid."\n".
+	$chr."\n".
+	$hcrnfqh."\n".
+	$sardnf."\n".
+	$sarnobu."\n".
+	$bu."\n".
+	$raruu."\n".
+	$hcrin."\n".
+	$sarnfqa."\n".
+	$rardnf."\n".
+	$rarnfqa."\n".
+	$iuscp."\n".
+	$sce."\n".
+	$scp."\n".
+	$urr."\n".
+	$msefl."\n";
+
+print $data;
+
+my $current=$receivedC."\n".
+	$deliveredC."\n".
+	$forwardedC."\n".
+	$deferredC."\n".
+	$bouncedC."\n".
+	$rejectedC."\n".
+	$rejectwC."\n".
+	$heldC."\n".
+	$discardedC."\n".
+	$bytesrC."\n".
+	$bytesdC."\n".
+	$sendersC."\n".
+	$sendinghdC."\n".
+	$recipientsC."\n".
+	$recipienthdC."\n".
+	$deferralcrC."\n".
+	$deferralhidC."\n".
+	$chrNew."\n".
+	$hcrnfqhC."\n".
+	$sardnfC."\n".
+	$sarnobuC."\n".
+	$buNew."\n".
+	$raruuNew."\n".
+	$hcrinC."\n".
+	$sarnfqaC."\n".
+	$rardnfC."\n".
+	$rarnfqaC."\n".
+	$iuscpC."\n".
+	$sceC."\n".
+	$scpC."\n".
+	$urrC."\n".
+	$mseflC."\n";
+
+open(my $fh, ">", $cache) or die "Can't open '".$cache."'";
+print $fh $current;
+close($fh);

initializers/oam/librenms/raspberry.sh

@@ -0,0 +1,46 @@
+#!/bin/bash
+#######################################
+# please read DOCS to succesfully get #
+# raspberry sensors into your host    #
+#######################################
+picmd='/usr/bin/vcgencmd'
+pised='/bin/sed'
+getTemp='measure_temp'
+getVoltsCore='measure_volts core'
+getVoltsRamC='measure_volts sdram_c'
+getVoltsRamI='measure_volts sdram_i'
+getVoltsRamP='measure_volts sdram_p'
+getFreqArm='measure_clock arm'
+getFreqCore='measure_clock core'
+getStatusH264='codec_enabled H264'
+getStatusMPG2='codec_enabled MPG2'
+getStatusWVC1='codec_enabled WVC1'
+getStatusMPG4='codec_enabled MPG4'
+getStatusMJPG='codec_enabled MJPG'
+getStatusWMV9='codec_enabled WMV9'
+
+$picmd $getTemp | $pised 's|[^0-9.]||g'
+$picmd "$getVoltsCore" | $pised 's|[^0-9.]||g'
+$picmd "$getVoltsRamC" | $pised 's|[^0-9.]||g'
+$picmd "$getVoltsRamI" | $pised 's|[^0-9.]||g'
+$picmd "$getVoltsRamP" | $pised 's|[^0-9.]||g'
+$picmd "$getFreqArm"  | $pised 's/frequency([0-9]*)=//g'
+$picmd "$getFreqCore" | $pised 's/frequency([0-9]*)=//g'
+$picmd "$getStatusH264" | $pised 's/H264=//g'
+$picmd "$getStatusMPG2" | $pised 's/MPG2=//g'
+$picmd "$getStatusWVC1" | $pised 's/WVC1=//g'
+$picmd "$getStatusMPG4" | $pised 's/MPG4=//g'
+$picmd "$getStatusMJPG" | $pised 's/MJPG=//g'
+$picmd "$getStatusWMV9" | $pised 's/WMV9=//g'
+$picmd "$getStatusH264" | $pised 's/enabled/2/g'
+$picmd "$getStatusMPG2" | $pised 's/enabled/2/g'
+$picmd "$getStatusWVC1" | $pised 's/enabled/2/g'
+$picmd "$getStatusMPG4" | $pised 's/enabled/2/g'
+$picmd "$getStatusMJPG" | $pised 's/enabled/2/g'
+$picmd "$getStatusWMV9" | $pised 's/enabled/2/g'
+$picmd "$getStatusH264" | $pised 's/disabled/1/g'
+$picmd "$getStatusMPG2" | $pised 's/disabled/1/g'
+$picmd "$getStatusWVC1" | $pised 's/disabled/1/g'
+$picmd "$getStatusMPG4" | $pised 's/disabled/1/g'
+$picmd "$getStatusMJPG" | $pised 's/disabled/1/g'
+$picmd "$getStatusWMV9" | $pised 's/disabled/1/g'

initializers/oam/librenms/smart

@@ -0,0 +1,929 @@
+#!/usr/bin/env perl
+#Copyright (c) 2024, Zane C. Bowers-Hadley
+#All rights reserved.
+#
+#Redistribution and use in source and binary forms, with or without modification,
+#are permitted provided that the following conditions are met:
+#
+#   * Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#   * Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+#THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+#ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+#WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+#IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+#INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+#BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+#LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+#THE POSSIBILITY OF SUCH DAMAGE.
+
+=for comment
+
+Add this to snmpd.conf like below.
+
+    extend smart /etc/snmp/smart
+
+Then add to root's cron tab, if you have more than a few disks.
+
+    */5 * * * * /etc/snmp/extends/smart -u
+
+You will also need to create the config file, which defaults to the same path as the script,
+but with .config appended. So if the script is located at /etc/snmp/smart, the config file
+will be /etc/snmp/extends/smart.config. Alternatively you can also specific a config via -c.
+
+Anything starting with a # is comment. The format for variables is $variable=$value. Empty
+lines are ignored. Spaces and tabes at either the start or end of a line are ignored. Any
+line with out a matched variable or # are treated as a disk.
+
+    #This is a comment
+    cache=/var/cache/smart
+    smartctl=/usr/local/sbin/smartctl
+    useSN=0
+    ada0
+    da5 /dev/da5 -d sat
+    twl0,0 /dev/twl0 -d 3ware,0
+    twl0,1 /dev/twl0 -d 3ware,1
+    twl0,2 /dev/twl0 -d 3ware,2
+
+The variables are as below.
+
+    cache = The path to the cache file to use. Default: /var/cache/smart
+    smartctl = The path to use for smartctl. Default: /usr/bin/env smartctl
+    useSN = If set to 1, it will use the disks SN for reporting instead of the device name.
+            1 is the default. 0 will use the device name.
+
+A disk line is can be as simple as just a disk name under /dev/. Such as in the config above
+The line "ada0" would resolve to "/dev/ada0" and would be called with no special argument. If
+a line has a space in it, everything before the space is treated as the disk name and is what
+used for reporting and everything after that is used as the argument to be passed to smartctl.
+
+If you want to guess at the configuration, call it with -g and it will print out what it thinks
+it should be.
+
+
+Switches:
+
+-c <config>   The config file to use.
+-u            Update
+-p            Pretty print the JSON.
+-Z            GZip+Base64 compress the results.
+
+-g            Guess at the config and print it to STDOUT
+-C            Enable manual checking for guess and cciss.
+-S            Set useSN to 0 when using -g
+-t <test>     Run the specified smart self test on all the devices.
+-U            When calling cciss_vol_status, call it with -u.
+-G <modes>    Guess modes to use. This is a comma seperated list.
+              Default :: scan-open,cciss-vol-status
+
+Guess Modes:
+
+- scan :: Use "--scan" with smartctl. "scan-open" will take presidence.
+
+- scan-open :: Call smartctl with "--scan-open".
+
+- cciss-vol-status :: Freebsd/Linux specific and if it sees /dev/sg0(on Linux) or
+    /dev/ciss0(on FreebSD) it will attempt to find drives via cciss-vol-status,
+    and then optionally checking for disks via smrtctl if -C is given. Should be noted
+    though that -C will not find drives that are currently missing/failed. If -U is given,
+    cciss_vol_status will be called with -u.
+
+=cut
+
+##
+## You should not need to touch anything below here.
+##
+use warnings;
+use strict;
+use Getopt::Std;
+use JSON;
+use MIME::Base64;
+use IO::Compress::Gzip qw(gzip $GzipError);
+
+my $cache    = '/var/cache/smart';
+my $smartctl = '/usr/bin/env smartctl';
+my @disks;
+my $useSN = 1;
+
+$Getopt::Std::STANDARD_HELP_VERSION = 1;
+
+sub main::VERSION_MESSAGE {
+	print "SMART SNMP extend 0.3.2\n";
+}
+
+sub main::HELP_MESSAGE {
+	&VERSION_MESSAGE;
+	print "\n" . "-u   Update '" . $cache . "'\n" . '-g            Guess at the config and print it to STDOUT
+-c <config>   The config file to use.
+-p            Pretty print the JSON.
+-Z            GZip+Base64 compress the results.
+-C            Enable manual checking for guess and cciss.
+-S            Set useSN to 0 when using -g
+-t <test>     Run the specified smart self test on all the devices.
+-U            When calling cciss_vol_status, call it with -u.
+-G <modes>    Guess modes to use. This is a comma seperated list.
+              Default :: scan-open,cciss-vol-status
+
+
+Scan Modes:
+
+- scan :: Use "--scan" with smartctl. "scan-open" will take presidence.
+
+- scan-open :: Call smartctl with "--scan-open".
+
+- cciss-vol-status :: Freebsd/Linux specific and if it sees /dev/sg0(on Linux) or
+    /dev/ciss0(on FreebSD) it will attempt to find drives via cciss-vol-status,
+    and then optionally checking for disks via smrtctl if -C is given. Should be noted
+    though that -C will not find drives that are currently missing/failed. If -U is given,
+    cciss_vol_status will be called with -u.
+';
+
+} ## end sub main::HELP_MESSAGE
+
+#gets the options
+my %opts = ();
+getopts( 'ugc:pZhvCSGt:U', \%opts );
+
+if ( $opts{h} ) {
+	&HELP_MESSAGE;
+	exit;
+}
+if ( $opts{v} ) {
+	&VERSION_MESSAGE;
+	exit;
+}
+
+#
+# figure out what scan modes to use if -g specified
+#
+my $scan_modes = {
+	'scan-open'        => 0,
+	'scan'             => 0,
+	'cciss_vol_status' => 0,
+};
+if ( $opts{g} ) {
+	if ( !defined( $opts{G} ) ) {
+		$opts{G} = 'scan-open,cciss_vol_status';
+	}
+	$opts{G} =~ s/[\ \t]//g;
+	my @scan_modes_split = split( /,/, $opts{G} );
+	foreach my $mode (@scan_modes_split) {
+		if ( !defined $scan_modes->{$mode} ) {
+			die( '"' . $mode . '" is not a recognized scan mode' );
+		}
+		$scan_modes->{$mode} = 1;
+	}
+} ## end if ( $opts{g} )
+
+# configure JSON for later usage
+# only need to do this if actually running as in -g is not specified
+my $json;
+if ( !$opts{g} ) {
+
+	$json = JSON->new->allow_nonref->canonical(1);
+	if ( $opts{p} ) {
+		$json->pretty;
+	}
+}
+
+#
+#
+# guess if asked
+#
+#
+if ( defined( $opts{g} ) ) {
+
+	#get what path to use for smartctl
+	$smartctl = `which smartctl`;
+	chomp($smartctl);
+	if ( $? != 0 ) {
+		warn("'which smartctl' failed with a exit code of $?");
+		exit 1;
+	}
+
+	#try to touch the default cache location and warn if it can't be done
+	system( 'touch ' . $cache . '>/dev/null' );
+	if ( $? != 0 ) {
+		$cache = '#Could not touch ' . $cache . "You will need to manually set it\n" . "cache=?\n";
+	} else {
+		system( 'rm -f ' . $cache . '>/dev/null' );
+		$cache = 'cache=' . $cache . "\n";
+	}
+
+	my $drive_lines = '';
+
+	#
+	#
+	# scan-open and scan guess mode handling
+	#
+	#
+	if ( $scan_modes->{'scan-open'} || $scan_modes->{'scan'} ) {
+		# used for checking if a disk has been found more than once
+		my %found_disks_names;
+		my @argumentsA;
+
+		# use scan-open if it is set, overriding scan if it is also set
+		my $mode = 'scan';
+		if ( $scan_modes->{'scan-open'} ) {
+			$mode = 'scan-open';
+		}
+
+		#have smartctl scan and see if it finds anythings not get found
+		my $scan_output  = `$smartctl --$mode`;
+		my @scan_outputA = split( /\n/, $scan_output );
+
+		# remove non-SMART devices sometimes returned
+		@scan_outputA = grep( !/ses[0-9]/,  @scan_outputA );    # not a disk, but may or may not have SMART attributes
+		@scan_outputA = grep( !/pass[0-9]/, @scan_outputA );    # very likely a duplicate and a disk under another name
+		@scan_outputA = grep( !/cd[0-9]/,   @scan_outputA );    # CD drive
+		if ( $^O eq 'freebsd' ) {
+			@scan_outputA = grep( !/sa[0-9]/,  @scan_outputA );    # tape drive
+			@scan_outputA = grep( !/ctl[0-9]/, @scan_outputA );    # CAM target layer
+		} elsif ( $^O eq 'linux' ) {
+			@scan_outputA = grep( !/st[0-9]/, @scan_outputA );     # SCSI tape drive
+			@scan_outputA = grep( !/ht[0-9]/, @scan_outputA );     # ATA tape drive
+		}
+
+		# make the first pass, figuring out what all we have and trimming comments
+		foreach my $arguments (@scan_outputA) {
+			my $name = $arguments;
+
+			$arguments =~ s/ \#.*//;                               # trim the comment out of the argument
+			$name      =~ s/ .*//;
+			$name      =~ s/\/dev\///;
+			if ( defined( $found_disks_names{$name} ) ) {
+				$found_disks_names{$name}++;
+			} else {
+				$found_disks_names{$name} = 0;
+			}
+
+			push( @argumentsA, $arguments );
+
+		} ## end foreach my $arguments (@scan_outputA)
+
+		# second pass, putting the lines together
+		my %current_disk;
+		foreach my $arguments (@argumentsA) {
+			my $not_virt = 1;
+
+			# check to see if we have a virtual device
+			my @virt_check = split( /\n/, `smartctl -i $arguments 2> /dev/null` );
+			foreach my $virt_check_line (@virt_check) {
+				if ( $virt_check_line =~ /(?i)Product\:.*LOGICAL VOLUME/ ) {
+					$not_virt = 0;
+				}
+			}
+
+			my $name = $arguments;
+			$name =~ s/ .*//;
+			$name =~ s/\/dev\///;
+
+			# only add it if not a virtual RAID drive
+			# HP RAID virtual disks will show up with very basical but totally useless smart data
+			if ($not_virt) {
+				if ( $found_disks_names{$name} == 0 ) {
+					# If no other devices, just name it after the base device.
+					$drive_lines = $drive_lines . $name . " " . $arguments . "\n";
+				} else {
+					# if more than one, start at zero and increment, apennding comma number to the base device name
+					if ( defined( $current_disk{$name} ) ) {
+						$current_disk{$name}++;
+					} else {
+						$current_disk{$name} = 0;
+					}
+					$drive_lines = $drive_lines . $name . "," . $current_disk{$name} . " " . $arguments . "\n";
+				}
+			} ## end if ($not_virt)
+
+		} ## end foreach my $arguments (@argumentsA)
+	} ## end if ( $scan_modes->{'scan-open'} || $scan_modes...)
+
+	#
+	#
+	# scan mode handler for cciss_vol_status
+	# /dev/sg* devices for cciss on Linux
+	# /dev/ccis* devices for cciss on FreeBSD
+	#
+	#
+	if ( $scan_modes->{'cciss_vol_status'} && ( $^O eq 'linux' || $^O eq 'freebsd' ) ) {
+		my $cciss;
+		if ( $^O eq 'freebsd' ) {
+			$cciss = 'ciss';
+		} elsif ( $^O eq 'linux' ) {
+			$cciss = 'sg';
+		}
+
+		my $uarg = '';
+		if ( $opts{U} ) {
+			$uarg = '-u';
+		}
+
+		# generate the initial device path that will be checked
+		my $sg_int = 0;
+		my $device = '/dev/' . $cciss . $sg_int;
+
+		my $sg_process = 1;
+		if ( -e $device ) {
+			my $output = `which cciss_vol_status 2> /dev/null`;
+			if ( $? != 0 && !$opts{C} ) {
+				$sg_process = 0;
+				$drive_lines
+					= $drive_lines
+					. "# -C not given, but "
+					. $device
+					. " exists and cciss_vol_status is not present\n"
+					. "# in path or 'ccis_vol_status -V "
+					. $device
+					. "' is failing\n";
+			} ## end if ( $? != 0 && !$opts{C} )
+		} ## end if ( -e $device )
+		my $seen_lines   = {};
+		my $ignore_lines = {};
+		while ( -e $device && $sg_process ) {
+			my $output = `cciss_vol_status -V $uarg $device 2> /dev/null`;
+			if ( $? != 0 && $output eq '' && !$opts{C} ) {
+				# just empty here as we just want to skip it if it fails and there is no C
+				# warning is above
+			} elsif ( $? != 0 && $output eq '' && $opts{C} ) {
+				my $drive_count = 0;
+				my $continue    = 1;
+				while ($continue) {
+					my $output = `$smartctl -i $device -d cciss,$drive_count 2> /dev/null`;
+					if ( $? != 0 ) {
+						$continue = 0;
+					} else {
+						my $add_it = 0;
+						my $id;
+						while ( $output =~ /(?i)Serial Number:(.*)/g ) {
+							$id = $1;
+							$id =~ s/^\s+|\s+$//g;
+						}
+						if ( defined($id) && !defined( $seen_lines->{$id} ) ) {
+							$add_it = 1;
+							$seen_lines->{$id} = 1;
+						}
+						if ( $continue && $add_it ) {
+							$drive_lines
+								= $drive_lines
+								. $cciss . '0-'
+								. $drive_count . ' '
+								. $device
+								. ' -d cciss,'
+								. $drive_count . "\n";
+						}
+					} ## end else [ if ( $? != 0 ) ]
+					$drive_count++;
+				} ## end while ($continue)
+			} else {
+				my $drive_count = 0;
+				# count the connector lines, this will make sure failed are founded as well
+				my $seen_conectors = {};
+				while ( $output =~ /(connector +\d+[IA]\ +box +\d+\ +bay +\d+.*)/g ) {
+					my $cciss_drive_line = $1;
+					my $connector        = $cciss_drive_line;
+					$connector =~ s/(.*\ bay +\d+).*/$1/;
+					if (   !defined( $seen_lines->{$cciss_drive_line} )
+						&& !defined( $seen_conectors->{$connector} )
+						&& !defined( $ignore_lines->{$cciss_drive_line} ) )
+					{
+						$seen_lines->{$cciss_drive_line} = 1;
+						$seen_conectors->{$connector}    = 1;
+						$drive_count++;
+					} else {
+						# going to be a connector we've already seen
+						# which will happen when it is processing replacement drives
+						# so save this as a device to ignore
+						$ignore_lines->{$cciss_drive_line} = 1;
+					}
+				} ## end while ( $output =~ /(connector +\d+[IA]\ +box +\d+\ +bay +\d+.*)/g)
+				my $drive_int = 0;
+				while ( $drive_int < $drive_count ) {
+					$drive_lines
+						= $drive_lines
+						. $cciss
+						. $sg_int . '-'
+						. $drive_int . ' '
+						. $device
+						. ' -d cciss,'
+						. $drive_int . "\n";
+
+					$drive_int++;
+				} ## end while ( $drive_int < $drive_count )
+			} ## end else [ if ( $? != 0 && $output eq '' && !$opts{C})]
+
+			$sg_int++;
+			$device = '/dev/' . $cciss . $sg_int;
+		} ## end while ( -e $device && $sg_process )
+	} ## end if ( $scan_modes->{'cciss_vol_status'} && ...)
+
+	my $useSN = 1;
+	if ( $opts{S} ) {
+		$useSN = 0;
+	}
+
+	print '# scan_modes='
+		. $opts{G}
+		. "\nuseSN="
+		. $useSN . "\n"
+		. 'smartctl='
+		. $smartctl . "\n"
+		. $cache
+		. $drive_lines;
+
+	exit 0;
+} ## end if ( defined( $opts{g} ) )
+
+#get which config file to use
+my $config = $0 . '.config';
+if ( defined( $opts{c} ) ) {
+	$config = $opts{c};
+}
+
+#reads the config file, optionally
+my $config_file = '';
+open( my $readfh, "<", $config ) or die "Can't open '" . $config . "'";
+read( $readfh, $config_file, 1000000 );
+close($readfh);
+
+#
+#
+# parse the config file and remove comments and empty lines
+#
+#
+my @configA = split( /\n/, $config_file );
+@configA = grep( !/^$/,        @configA );
+@configA = grep( !/^\#/,       @configA );
+@configA = grep( !/^[\s\t]*$/, @configA );
+my $configA_int = 0;
+while ( defined( $configA[$configA_int] ) ) {
+	my $line = $configA[$configA_int];
+	chomp($line);
+	$line =~ s/^[\t\s]+//;
+	$line =~ s/[\t\s]+$//;
+
+	my ( $var, $val ) = split( /=/, $line, 2 );
+
+	my $matched;
+	if ( $var eq 'cache' ) {
+		$cache   = $val;
+		$matched = 1;
+	}
+
+	if ( $var eq 'smartctl' ) {
+		$smartctl = $val;
+		$matched  = 1;
+	}
+
+	if ( $var eq 'useSN' ) {
+		$useSN   = $val;
+		$matched = 1;
+	}
+
+	if ( !defined($val) ) {
+		push( @disks, $line );
+	}
+
+	$configA_int++;
+} ## end while ( defined( $configA[$configA_int] ) )
+
+#
+#
+# run the specified self test on all disks if asked
+#
+#
+if ( defined( $opts{t} ) ) {
+
+	# make sure we have something that atleast appears sane for the test name
+	my $valid_tesks = {
+		'offline'        => 1,
+		'short'          => 1,
+		'long'           => 1,
+		'conveyance'     => 1,
+		'afterselect,on' => 1,
+	};
+	if ( !defined( $valid_tesks->{ $opts{t} } ) && $opts{t} !~ /select,(\d+[\-\+]\d+|next|next\+\d+|redo\+\d+)/ ) {
+		print '"' . $opts{t} . "\" does not appear to be a valid test\n";
+		exit 1;
+	}
+
+	print "Running the SMART $opts{t} on all devices in the config...\n\n";
+
+	foreach my $line (@disks) {
+		my $disk;
+		my $name;
+		if ( $line =~ /\ / ) {
+			( $name, $disk ) = split( /\ /, $line, 2 );
+		} else {
+			$disk = $line;
+			$name = $line;
+		}
+		if ( $disk !~ /\// ) {
+			$disk = '/dev/' . $disk;
+		}
+
+		print "\n------------------------------------------------------------------\nDoing "
+			. $smartctl . ' -t '
+			. $opts{t} . ' '
+			. $disk
+			. "  ...\n\n";
+		print `$smartctl -t $opts{t} $disk` . "\n";
+
+	} ## end foreach my $line (@disks)
+
+	exit 0;
+} ## end if ( defined( $opts{t} ) )
+
+#if set to 1, no cache will be written and it will be printed instead
+my $noWrite = 0;
+
+#
+#
+# if no -u, it means we are being called from snmped
+#
+#
+if ( !defined( $opts{u} ) ) {
+	# if the cache file exists, print it, otherwise assume one is not being used
+	if ( -f $cache ) {
+		my $old = '';
+		open( my $readfh, "<", $cache ) or die "Can't open '" . $cache . "'";
+		read( $readfh, $old, 1000000 );
+		close($readfh);
+		print $old;
+		exit 0;
+	} else {
+		$opts{u} = 1;
+		$noWrite = 1;
+	}
+} ## end if ( !defined( $opts{u} ) )
+
+#
+#
+# Process each disk
+#
+#
+my $to_return = {
+	data        => { disks => {}, exit_nonzero => 0, unhealthy => 0, useSN => $useSN },
+	version     => 1,
+	error       => 0,
+	errorString => '',
+};
+foreach my $line (@disks) {
+	my $disk;
+	my $name;
+	if ( $line =~ /\ / ) {
+		( $name, $disk ) = split( /\ /, $line, 2 );
+	} else {
+		$disk = $line;
+		$name = $line;
+	}
+	if ( $disk !~ /\// ) {
+		$disk = '/dev/' . $disk;
+	}
+
+	my $output = `$smartctl -A $disk`;
+	my %IDs    = (
+		'5'            => 'null',
+		'10'           => 'null',
+		'173'          => 'null',
+		'177'          => 'null',
+		'183'          => 'null',
+		'184'          => 'null',
+		'187'          => 'null',
+		'188'          => 'null',
+		'190'          => 'null',
+		'194'          => 'null',
+		'196'          => 'null',
+		'197'          => 'null',
+		'198'          => 'null',
+		'199'          => 'null',
+		'231'          => 'null',
+		'232'          => 'null',
+		'233'          => 'null',
+		'9'            => 'null',
+		'disk'         => $disk,
+		'serial'       => undef,
+		'selftest_log' => undef,
+		'health_pass'  => 0,
+		max_temp       => 'null',
+		exit           => $?,
+	);
+	$IDs{'disk'} =~ s/^\/dev\///;
+
+	# if polling exited non-zero above, no reason running the rest of the checks
+	my $disk_id = $name;
+	if ( $IDs{exit} != 0 ) {
+		$to_return->{data}{exit_nonzero}++;
+	} else {
+		my @outputA;
+
+		if ( $output =~ /NVMe Log/ ) {
+			# we have an NVMe drive with annoyingly different output
+			my %mappings = (
+				'Temperature'     => 194,
+				'Power Cycles'    => 12,
+				'Power On Hours'  => 9,
+				'Percentage Used' => 231,
+			);
+			foreach ( split( /\n/, $output ) ) {
+				if (/:/) {
+					my ( $key, $val ) = split(/:/);
+					$val =~ s/^\s+|\s+$|\D+//g;
+					if ( exists( $mappings{$key} ) ) {
+						if ( $mappings{$key} == 231 ) {
+							$IDs{ $mappings{$key} } = 100 - $val;
+						} else {
+							$IDs{ $mappings{$key} } = $val;
+						}
+					}
+				} ## end if (/:/)
+			} ## end foreach ( split( /\n/, $output ) )
+
+		} else {
+			@outputA = split( /\n/, $output );
+			my $outputAint = 0;
+			while ( defined( $outputA[$outputAint] ) ) {
+				my $line = $outputA[$outputAint];
+				$line =~ s/^ +//;
+				$line =~ s/  +/ /g;
+
+				if ( $line =~ /^[0123456789]+ / ) {
+					my @lineA      = split( /\ /, $line, 10 );
+					my $raw        = $lineA[9];
+					my $normalized = $lineA[3];
+					my $id         = $lineA[0];
+
+					# Crucial SSD
+					# 202, Percent_Lifetime_Remain, same as 231, SSD Life Left
+					if (   $id == 202
+						&& $line =~ /Percent_Lifetime_Remain/ )
+					{
+						$IDs{231} = $raw;
+					}
+
+					# single int raw values
+					if (   ( $id == 5 )
+						|| ( $id == 10 )
+						|| ( $id == 173 )
+						|| ( $id == 183 )
+						|| ( $id == 184 )
+						|| ( $id == 187 )
+						|| ( $id == 196 )
+						|| ( $id == 197 )
+						|| ( $id == 198 )
+						|| ( $id == 199 ) )
+					{
+						my @rawA = split( /\ /, $raw );
+						$IDs{$id} = $rawA[0];
+					} ## end if ( ( $id == 5 ) || ( $id == 10 ) || ( $id...))
+
+					# single int normalized values
+					if (   ( $id == 177 )
+						|| ( $id == 230 )
+						|| ( $id == 231 )
+						|| ( $id == 232 )
+						|| ( $id == 233 ) )
+					{
+				 # annoying non-standard disk
+				 # WDC WDS500G2B0A
+				 # 230 Media_Wearout_Indicator 0x0032   100   100   ---    Old_age   Always       -       0x002e000a002e
+				 # 232 Available_Reservd_Space 0x0033   100   100   004    Pre-fail  Always       -       100
+				 # 233 NAND_GB_Written_TLC     0x0032   100   100   ---    Old_age   Always       -       9816
+
+						if (   $id == 230
+							&& $line =~ /Media_Wearout_Indicator/ )
+						{
+							$IDs{233} = int($normalized);
+						} elsif ( $id == 232
+							&& $line =~ /Available_Reservd_Space/ )
+						{
+							$IDs{232} = int($normalized);
+						} else {
+							# only set 233 if it has not been set yet
+							# if it was set already then the above did it and we don't want
+							# to overwrite it
+							if ( $id == 233 && $IDs{233} eq "null" ) {
+								$IDs{$id} = int($normalized);
+							} elsif ( $id != 233 ) {
+								$IDs{$id} = int($normalized);
+							}
+						} ## end else [ if ( $id == 230 && $line =~ /Media_Wearout_Indicator/)]
+					} ## end if ( ( $id == 177 ) || ( $id == 230 ) || (...))
+
+					# 9, power on hours
+					if ( $id == 9 ) {
+						my @runtime = split( /[\ h]/, $raw );
+						$IDs{$id} = $runtime[0];
+					}
+
+					# 188, Command_Timeout
+					if ( $id == 188 ) {
+						my $total   = 0;
+						my @rawA    = split( /\ /, $raw );
+						my $rawAint = 0;
+						while ( defined( $rawA[$rawAint] ) ) {
+							$total = $total + $rawA[$rawAint];
+							$rawAint++;
+						}
+						$IDs{$id} = $total;
+					} ## end if ( $id == 188 )
+
+					# 190, airflow temp
+					# 194, temp
+					if (   ( $id == 190 )
+						|| ( $id == 194 ) )
+					{
+						my ($temp) = split( /\ /, $raw );
+						$IDs{$id} = $temp;
+					}
+				} ## end if ( $line =~ /^[0123456789]+ / )
+
+				# SAS Wrapping
+				# Section by Cameron Munroe (munroenet[at]gmail.com)
+
+				# Elements in Grown Defect List.
+				# Marking as 5 Reallocated_Sector_Ct
+				if ( $line =~ "Elements in grown defect list:" ) {
+
+					my @lineA = split( /\ /, $line, 10 );
+					my $raw   = $lineA[5];
+
+					# Reallocated Sector Count ID
+					$IDs{5} = $raw;
+
+				}
+
+				# Current Drive Temperature
+				# Marking as 194 Temperature_Celsius
+				if ( $line =~ "Current Drive Temperature:" ) {
+
+					my @lineA = split( /\ /, $line, 10 );
+					my $raw   = $lineA[3];
+
+					# Temperature C ID
+					$IDs{194} = $raw;
+
+				}
+
+				# End of SAS Wrapper
+
+				$outputAint++;
+			} ## end while ( defined( $outputA[$outputAint] ) )
+		} ## end else [ if ( $output =~ /NVMe Log/ ) ]
+
+		#get the selftest logs
+		$output  = `$smartctl -l selftest $disk`;
+		@outputA = split( /\n/, $output );
+		my @completed = grep( /Completed/, @outputA );
+		$IDs{'completed'} = scalar @completed;
+		my @interrupted = grep( /Interrupted/, @outputA );
+		$IDs{'interrupted'} = scalar @interrupted;
+		my @read_failure = grep( /read failure/, @outputA );
+		$IDs{'read_failure'} = scalar @read_failure;
+		my @read_failure2 = grep( /Failed in segment/, @outputA );
+		$IDs{'read_failure'} = $IDs{'read_failure'} + scalar @read_failure2;
+		my @unknown_failure = grep( /unknown failure/, @outputA );
+		$IDs{'unknown_failure'} = scalar @unknown_failure;
+		my @extended = grep( /\d.*\ ([Ee]xtended|[Ll]ong).*(?![Dd]uration)/, @outputA );
+		$IDs{'extended'} = scalar @extended;
+		my @short = grep( /[Ss]hort/, @outputA );
+		$IDs{'short'} = scalar @short;
+		my @conveyance = grep( /[Cc]onveyance/, @outputA );
+		$IDs{'conveyance'} = scalar @conveyance;
+		my @selective = grep( /[Ss]elective/, @outputA );
+		$IDs{'selective'} = scalar @selective;
+		my @offline = grep( /(\d|[Bb]ackground|[Ff]oreground)+\ +[Oo]ffline/, @outputA );
+		$IDs{'offline'} = scalar @offline;
+
+		# if we have logs, actually grab the log output
+		if (   $IDs{'completed'} > 0
+			|| $IDs{'interrupted'} > 0
+			|| $IDs{'read_failure'} > 0
+			|| $IDs{'extended'} > 0
+			|| $IDs{'short'} > 0
+			|| $IDs{'conveyance'} > 0
+			|| $IDs{'selective'} > 0
+			|| $IDs{'offline'} > 0 )
+		{
+			my @headers = grep( /(Num\ +Test.*LBA| Description .*[Hh]ours)/, @outputA );
+
+			my @log_lines;
+			push( @log_lines, @extended, @short, @conveyance, @selective, @offline );
+			$IDs{'selftest_log'} = join( "\n", @headers, sort(@log_lines) );
+		} ## end if ( $IDs{'completed'} > 0 || $IDs{'interrupted'...})
+
+		# get the drive serial number, if needed
+		$disk_id = $name;
+		$output  = `$smartctl -i $disk`;
+		# generally upper case, HP branded drives seem to report with lower case n
+		while ( $output =~ /(?i)Serial Number:(.*)/g ) {
+			$IDs{'serial'} = $1;
+			$IDs{'serial'} =~ s/^\s+|\s+$//g;
+		}
+		if ($useSN) {
+			$disk_id = $IDs{'serial'};
+		}
+
+		while ( $output =~ /(?i)Model Family:(.*)/g ) {
+			$IDs{'model_family'} = $1;
+			$IDs{'model_family'} =~ s/^\s+|\s+$//g;
+		}
+
+		while ( $output =~ /(?i)Device Model:(.*)/g ) {
+			$IDs{'device_model'} = $1;
+			$IDs{'device_model'} =~ s/^\s+|\s+$//g;
+		}
+
+		while ( $output =~ /(?i)Model Number:(.*)/g ) {
+			$IDs{'model_number'} = $1;
+			$IDs{'model_number'} =~ s/^\s+|\s+$//g;
+		}
+
+		while ( $output =~ /(?i)Firmware Version:(.*)/g ) {
+			$IDs{'fw_version'} = $1;
+			$IDs{'fw_version'} =~ s/^\s+|\s+$//g;
+		}
+
+		# mainly HP drives
+		while ( $output =~ /(?i)Vendor:(.*)/g ) {
+			$IDs{'vendor'} = $1;
+			$IDs{'vendor'} =~ s/^\s+|\s+$//g;
+		}
+
+		# mainly HP drives
+		while ( $output =~ /(?i)Product:(.*)/g ) {
+			$IDs{'product'} = $1;
+			$IDs{'product'} =~ s/^\s+|\s+$//g;
+		}
+
+		# mainly HP drives
+		while ( $output =~ /(?i)Revision:(.*)/g ) {
+			$IDs{'revision'} = $1;
+			$IDs{'revision'} =~ s/^\s+|\s+$//g;
+		}
+
+		# figure out what to use for the max temp, if there is one
+		if ( $IDs{'190'} =~ /^\d+$/ ) {
+			$IDs{max_temp} = $IDs{'190'};
+		} elsif ( $IDs{'194'} =~ /^\d+$/ ) {
+			$IDs{max_temp} = $IDs{'194'};
+		}
+		if ( $IDs{'194'} =~ /^\d+$/ && defined( $IDs{max_temp} ) && $IDs{'194'} > $IDs{max_temp} ) {
+			$IDs{max_temp} = $IDs{'194'};
+		}
+
+		$output = `$smartctl -H $disk`;
+		if ( $output =~ /SMART\ overall\-health\ self\-assessment\ test\ result\:\ PASSED/ ) {
+			$IDs{'health_pass'} = 1;
+		} elsif ( $output =~ /SMART\ Health\ Status\:\ OK/ ) {
+			$IDs{'health_pass'} = 1;
+		}
+
+		if ( !$IDs{'health_pass'} ) {
+			$to_return->{data}{unhealthy}++;
+		}
+	} ## end else [ if ( $IDs{exit} != 0 ) ]
+
+	# only bother to save this if useSN is not being used
+	if ( !$useSN ) {
+		$to_return->{data}{disks}{$disk_id} = \%IDs;
+	} elsif ( $IDs{exit} == 0 && defined($disk_id) ) {
+		$to_return->{data}{disks}{$disk_id} = \%IDs;
+	}
+
+	# smartctl will in some cases exit zero when it can't pull data for cciss
+	# so if we get a zero exit, but no serial then it means something errored
+	# and the device is likely dead
+	if ( $IDs{exit} == 0 && !defined( $IDs{serial} ) ) {
+		$to_return->{data}{unhealthy}++;
+	}
+} ## end foreach my $line (@disks)
+
+my $toReturn = $json->encode($to_return);
+
+if ( !$opts{p} ) {
+	$toReturn = $toReturn . "\n";
+}
+
+if ( $opts{Z} ) {
+	my $toReturnCompressed;
+	gzip \$toReturn => \$toReturnCompressed;
+	my $compressed = encode_base64($toReturnCompressed);
+	$compressed =~ s/\n//g;
+	$compressed = $compressed . "\n";
+	if ( length($compressed) < length($toReturn) ) {
+		$toReturn = $compressed;
+	}
+} ## end if ( $opts{Z} )
+
+if ( !$noWrite ) {
+	open( my $writefh, ">", $cache ) or die "Can't open '" . $cache . "'";
+	print $writefh $toReturn;
+	close($writefh);
+} else {
+	print $toReturn;
+}

initializers/oam/librenms/smart.config

@@ -0,0 +1,3 @@
+smartctl=/usr/sbin/smartctl
+cache=/var/cache/smart
+sda

initializers/oam/librenms/ups-nut.sh

@@ -0,0 +1,45 @@
+#!/bin/sh
+################################################################
+# Instructions:                                                #
+# 1. copy this script to /etc/snmp/ and make it executable:    #
+#    chmod +x ups-nut.sh                                       #
+# 2. make sure UPS_NAME below matches the name of your UPS     #
+# 3. edit your snmpd.conf to include this line:                #
+#    extend ups-nut /etc/snmp/ups-nut.sh                       #
+# 4. restart snmpd on the host                                 #
+# 5. activate the app for the desired host in LibreNMS         #
+################################################################
+UPS_NAME="${1:-APCUPS}"
+
+PATH=$PATH:/usr/bin:/bin
+TMP=$(upsc $UPS_NAME 2>/dev/null)
+
+for value in "battery\.charge: [0-9.]+" "battery\.(runtime\.)?low: [0-9]+" "battery\.runtime: [0-9]+" "battery\.voltage: [0-9.]+" "battery\.voltage\.nominal: [0-9]+" "input\.voltage\.nominal: [0-9.]+" "input\.voltage: [0-9.]+" "ups\.load: [0-9.]+"
+do
+	OUT=$(echo "$TMP" | grep -Eo "$value" | awk '{print $2}' | LANG=C sort | head -n 1)
+	if [ -n "$OUT" ]; then
+		echo "$OUT"
+	else
+		echo "Unknown"
+	fi
+done
+
+for value in "ups\.status:[A-Z ]{0,}OL" "ups\.status:[A-Z ]{0,}OB" "ups\.status:[A-Z ]{0,}LB" "ups\.status:[A-Z ]{0,}HB" "ups\.status:[A-Z ]{0,}RB" "ups\.status:[A-Z ]{0,}CHRG" "ups\.status:[A-Z ]{0,}DISCHRG" "ups\.status:[A-Z ]{0,}BYPASS" "ups\.status:[A-Z ]{0,}CAL" "ups\.status:[A-Z ]{0,}OFF" "ups\.status:[A-Z ]{0,}OVER" "ups\.status:[A-Z ]{0,}TRIM" "ups\.status:[A-Z ]{0,}BOOST" "ups\.status:[A-Z ]{0,}FSD" "ups\.alarm:[A-Z ]"
+do
+    UNKNOWN=$(echo "$TMP" | grep -Eo "ups\.status:")
+    if [ -z "$UNKNOWN" ]; then
+        echo "Unknown"
+    else
+        OUT=$(echo "$TMP" | grep -Eo "$value")
+        if [ -n "$OUT" ]; then
+            echo "1"
+        else
+            echo "0"
+        fi
+    fi
+done
+
+UPSTEMP="ups\.temperature: [0-9.]+"
+OUT=$(echo "$TMP" | grep -Eo "$UPSTEMP" | awk '{print $2}' | LANG=C sort | head -n 1)
+[ -n "$OUT" ] && echo "$OUT" || echo "Unknown"
+

initializers/oam/scripts/up2date.sh

@@ -0,0 +1,16 @@
+#!/bin/bash
+
+echo "Running apt-get update"
+export DEBIAN_FRONTEND="noninteractive" && apt-get -qq --yes update
+
+echo "Running apt-get dist-upgrade"
+export DEBIAN_FRONTEND="noninteractive" && apt-get -qq --yes dist-upgrade
+
+echo "Running apt-get upgrade"
+export DEBIAN_FRONTEND="noninteractive" && apt-get -qq --yes upgrade
+
+
+echo "Running apt-get purge"
+export DEBIAN_FRONTEND="noninteractive" && apt-get -qq --purge autoremove --yes
+export DEBIAN_FRONTEND="noninteractive" && apt-get -qq autoclean --yes
+

initializers/packages/apply

@@ -1,7 +1,7 @@
 #!/bin/bash
 
 # KNEL Package Installation
-# This initializer installs required packages
+# This initializer installs required packages with conditional logic
 
 set -euo pipefail
 
@@ -21,6 +21,7 @@ sh /tmp/webmin-setup.sh -f && rm -f /tmp/webmin-setup.sh
 curl -fsSL https://tailscale.com/install.sh | sh
 
 # Remove unwanted packages
+export DEBIAN_FRONTEND="noninteractive"
 apt-get -y --purge remove \
     systemd-timesyncd \
     chrony \
@@ -35,7 +36,7 @@ apt-get -y --purge remove \
 apt-get --purge autoremove
 
 # Install desired packages
-apt-get install -y \
+apt-get -y -o Dpkg::Options::="--force-confold" install \
     virt-what \
     auditd \
     audispd-plugins \
@@ -68,6 +69,7 @@ apt-get install -y \
     command-not-found \
     lldpd \
     ansible-core \
+    salt-minion \
     net-tools \
     dos2unix \
     gpg \
@@ -103,19 +105,19 @@ apt-get install -y \
 
 # Kali-specific packages
 if [[ $KALI_CHECK -eq 0 ]]; then
-    apt-get install -y \
+    apt-get -y -o Dpkg::Options::="--force-confold" install \
         latencytop \
         cockpit-tests
 fi
 
 # KVM guest specific packages
 if [[ $IS_KVM_GUEST -eq 1 ]]; then
-    apt-get install -y qemu-guest-agent
+    apt-get -y install qemu-guest-agent
 fi
 
 # Physical host specific packages
 if [[ $IS_PHYSICAL_HOST -gt 0 ]]; then
-    apt-get install -y \
+    apt-get -y -o Dpkg::Options::="--force-confold" install \
         i7z \
         thermald \
         cpufrequtils \

initializers/postfix/apply

@@ -0,0 +1,32 @@
+#!/bin/bash
+
+# KNEL Postfix Module
+# Configures postfix for email delivery
+
+set -euo pipefail
+
+echo "Running postfix module..."
+
+# Stop postfix
+systemctl stop postfix
+
+# Configure postfix for local mail relay
+if [[ -f ./configs/postfix_generic ]]; then
+    cp ./configs/postfix_generic /etc/postfix/generic
+    postmap /etc/postfix/generic
+fi
+
+# Set postfix configuration
+postconf -e "inet_protocols = ipv4"
+postconf -e "inet_interfaces = 127.0.0.1"
+postconf -e "mydestination = 127.0.0.1"
+postconf -e "relayhost = tsys-cloudron.knel.net"
+postconf -e "smtp_generic_maps = hash:/etc/postfix/generic"
+
+# Restart postfix
+systemctl start postfix
+
+# Test mail delivery
+echo "Test email from $(hostname)" | mail -s "Test from $(hostname)" root
+
+echo "Postfix module completed"

initializers/postfix/configs/postfix_generic

@@ -0,0 +1 @@
+/.*/    tsysrootaccount@knel.net

initializers/salt-client/apply

@@ -0,0 +1,19 @@
+#!/bin/bash
+
+# KNEL Salt Client Initializer
+# Configures Salt minion for configuration management
+
+set -euo pipefail
+
+echo "Running Salt client initializer..."
+
+# Configure Salt minion if configuration file exists
+if [[ -f ./configs/salt-minion ]]; then
+    cp ./configs/salt-minion /etc/salt/minion
+fi
+
+# Enable and start Salt minion service
+systemctl enable salt-minion
+systemctl start salt-minion
+
+echo "Salt client initializer completed"

initializers/security-hardening/apply

@@ -0,0 +1,51 @@
+#!/bin/bash
+
+# KNEL Security Hardening Module
+# Implements SCAP/STIG security compliance
+
+set -euo pipefail
+
+echo "Running security hardening module..."
+
+# Enable auditd
+systemctl --now enable auditd
+
+# Configure sysctl security parameters
+if [[ -f ./configs/sysctl-hardening.conf ]]; then
+    cp ./configs/sysctl-hardening.conf /etc/sysctl.d/99-security-hardening.conf
+    sysctl -p /etc/sysctl.d/99-security-hardening.conf
+fi
+
+# Configure core dumps
+if [[ -f ./configs/security-limits.conf ]]; then
+    cp ./configs/security-limits.conf /etc/security/limits.d/security-lening.conf
+fi
+
+# Set file permissions
+chmod 644 /etc/passwd
+chmod 600 /etc/shadow
+chmod 644 /etc/group
+chmod 600 /etc/gshadow
+
+# Remove dangerous packages
+DEBIAN_FRONTEND="noninteractive" apt-get -y purge \
+    telnetd \
+    rsh-server \
+    rsh-client \
+    telnet \
+    || true
+
+# Install security tools
+DEBIAN_FRONTEND="noninteractive" apt-get -y install \
+    aide \
+    lynis \
+    chkrootkit \
+    rkhunter \
+    || true
+
+# Initialize AIDE database
+if [[ ! -f /var/lib/aide/aide.db ]]; then
+    aideinit
+fi
+
+echo "Security hardening module completed"

initializers/ssh-hardening/apply

@@ -0,0 +1,65 @@
+#!/bin/bash
+
+# KNEL SSH Hardening Module
+# Applies SSH security hardening configurations
+
+set -euo pipefail
+
+echo "Running SSH hardening module..."
+
+# Create SSH directories
+mkdir -p $ROOT_SSH_DIR
+
+# Setup root SSH keys
+if [[ -f ./configs/root-ssh-authorized-keys ]]; then
+    cp ./configs/root-ssh-authorized-keys $ROOT_SSH_DIR/authorized_keys
+    chmod 400 $ROOT_SSH_DIR/authorized_keys
+    chown root: $ROOT_SSH_DIR/authorized_keys
+fi
+
+# Setup localuser SSH keys
+if [[ $LOCALUSER_CHECK -gt 0 ]]; then
+    mkdir -p $LOCALUSER_SSH_DIR
+    
+    if [[ -f ./configs/localuser-ssh-authorized-keys ]]; then
+        cp ./configs/localuser-ssh-authorized-keys $LOCALUSER_SSH_DIR/authorized_keys
+        chmod 400 $LOCALUSER_SSH_DIR/authorized_keys
+        chown localuser $LOCALUSER_SSH_DIR/authorized_keys
+    fi
+fi
+
+# Setup subodev SSH keys
+if [[ $SUBODEV_CHECK -gt 0 ]]; then
+    mkdir -p $SUBODEV_SSH_DIR
+    
+    if [[ -f ./configs/localuser-ssh-authorized-keys ]]; then
+        cp ./configs/localuser-ssh-authorized-keys $SUBODEV_SSH_DIR/authorized_keys
+        chmod 400 $SUBODEV_SSH_DIR/authorized_keys
+        chown subodev: $SUBODEV_SSH_DIR/authorized_keys
+    fi
+fi
+
+# Deploy SSH configuration based on environment
+if [[ $DEV_WORKSTATION_CHECK -eq 0 ]]; then
+    # Production SSH configuration
+    if [[ -f ./configs/sshd-config ]]; then
+        cp ./configs/sshd-config /etc/ssh/sshd_config
+    fi
+else
+    # Development workstation - more permissive settings
+    if [[ -f ./configs/sshd-dev-config ]]; then
+        cp ./configs/sshd-dev-config /etc/ssh/sshd_config
+    fi
+fi
+
+# Additional SSH hardening for non-Ubuntu systems
+if [[ $UBUNTU_CHECK -ne 1 ]] && [[ -f ./configs/ssh-audit-hardening.conf ]]; then
+    mkdir -p /etc/ssh/sshd_config.d
+    cp ./configs/ssh-audit-hardening.conf /etc/ssh/sshd_config.d/ssh-audit_hardening.conf
+    chmod og-rwx /etc/ssh/sshd_config.d/*
+fi
+
+# Secure SSH configuration permissions
+chmod og-rwx /etc/ssh/sshd_config
+
+echo "SSH hardening module completed"

initializers/ssh-hardening/configs/localuser-ssh-authorized-keys

@@ -0,0 +1,2 @@
+ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIDHaBNuLS+GYGRPc9wne63Ocr+R+/Q01Y9V0FTv0RnG3
+ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPyMR0lFgiMKhQJ5aqy68nR0BQp1cNzi/wIThyuTV4a8 tsyscto@ultix-control

initializers/ssh-hardening/configs/root-ssh-authorized-keys

@@ -0,0 +1,2 @@
+ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIDHaBNuLS+GYGRPc9wne63Ocr+R+/Q01Y9V0FTv0RnG3
+ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPyMR0lFgiMKhQJ5aqy68nR0BQp1cNzi/wIThyuTV4a8 tsyscto@ultix-control

initializers/ssh-hardening/configs/ssh-audit-hardening.conf

@@ -0,0 +1,19 @@
+# Restrict key exchange, cipher, and MAC algorithms, as per sshaudit.com
+# hardening guide.
+ KexAlgorithms sntrup761x25519-sha512,sntrup761x25519-sha512@openssh.com,curve25519-sha256,curve25519-sha256@libssh.org,gss-curve25519-sha256-,diffie-hellman-group16-sha512,gss-group16-sha512-,diffie-hellman-group18-sha512,diffie-hellman-group-exchange-sha256
+
+Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes256-ctr,aes192-ctr,aes128-gcm@openssh.com,aes128-ctr
+
+MACs hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,umac-128-etm@openssh.com
+
+HostKeyAlgorithms sk-ssh-ed25519-cert-v01@openssh.com,ssh-ed25519-cert-v01@openssh.com,rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-256-cert-v01@openssh.com,sk-ssh-ed25519@openssh.com,ssh-ed25519,rsa-sha2-512,rsa-sha2-256
+
+RequiredRSASize 3072
+
+CASignatureAlgorithms sk-ssh-ed25519@openssh.com,ssh-ed25519,rsa-sha2-512,rsa-sha2-256
+
+GSSAPIKexAlgorithms gss-curve25519-sha256-,gss-group16-sha512-
+
+HostbasedAcceptedAlgorithms sk-ssh-ed25519-cert-v01@openssh.com,ssh-ed25519-cert-v01@openssh.com,sk-ssh-ed25519@openssh.com,ssh-ed25519,rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-512,rsa-sha2-256-cert-v01@openssh.com,rsa-sha2-256
+
+PubkeyAcceptedAlgorithms sk-ssh-ed25519-cert-v01@openssh.com,ssh-ed25519-cert-v01@openssh.com,sk-ssh-ed25519@openssh.com,ssh-ed25519,rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-512,rsa-sha2-256-cert-v01@openssh.com,rsa-sha2-256

initializers/ssh-hardening/configs/tsys-sshd-config

@@ -0,0 +1,20 @@
+Include /etc/ssh/sshd_config.d/*.conf
+HostKey /etc/ssh/ssh_host_rsa_key
+HostKey /etc/ssh/ssh_host_ed25519_key
+KbdInteractiveAuthentication no
+PrintMotd no
+PasswordAuthentication no
+AllowTcpForwarding no
+X11Forwarding no
+ChallengeResponseAuthentication no
+AcceptEnv LANG LC_*
+Subsystem       sftp    /usr/lib/openssh/sftp-server
+UsePAM yes
+Banner /etc/issue.net
+MaxAuthTries 2
+MaxStartups 10:30:100
+PermitRootLogin prohibit-password
+ClientAliveInterval 300
+ClientAliveCountMax 3
+AllowUsers root localuser subodev
+LoginGraceTime 60

initializers/ssh-keys/apply

@@ -0,0 +1,42 @@
+#!/bin/bash
+
+# KNEL SSH Keys Initializer
+# Sets up SSH authorized keys for users
+
+set -euo pipefail
+
+echo "Running SSH keys initializer..."
+
+# Create SSH directories
+mkdir -p $ROOT_SSH_DIR
+
+# Setup root SSH keys
+if [[ -f ./configs/root-ssh-authorized-keys ]]; then
+    cp ./configs/root-ssh-authorized-keys $ROOT_SSH_DIR/authorized_keys
+    chmod 400 $ROOT_SSH_DIR/authorized_keys
+    chown root: $ROOT_SSH_DIR/authorized_keys
+fi
+
+# Setup localuser SSH keys
+if [[ $LOCALUSER_CHECK -gt 0 ]]; then
+    mkdir -p $LOCALUSER_SSH_DIR
+    
+    if [[ -f ./configs/localuser-ssh-authorized-keys ]]; then
+        cp ./configs/localuser-ssh-authorized-keys $LOCALUSER_SSH_DIR/authorized_keys
+        chmod 400 $LOCALUSER_SSH_DIR/authorized_keys
+        chown localuser $LOCALUSER_SSH_DIR/authorized_keys
+    fi
+fi
+
+# Setup subodev SSH keys
+if [[ $SUBODEV_CHECK -gt 0 ]]; then
+    mkdir -p $SUBODEV_SSH_DIR
+    
+    if [[ -f ./configs/localuser-ssh-authorized-keys ]]; then
+        cp ./configs/localuser-ssh-authorized-keys $SUBODEV_SSH_DIR/authorized_keys
+        chmod 400 $SUBODEV_SSH_DIR/authorized_keys
+        chown subodev: $SUBODEV_SSH_DIR/authorized_keys
+    fi
+fi
+
+echo "SSH keys initializer completed"

initializers/ssh-keys/configs/localuser-ssh-authorized-keys

@@ -0,0 +1,2 @@
+ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIDHaBNuLS+GYGRPc9wne63Ocr+R+/Q01Y9V0FTv0RnG3
+ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPyMR0lFgiMKhQJ5aqy68nR0BQp1cNzi/wIThyuTV4a8 tsyscto@ultix-control

initializers/ssh-keys/configs/root-ssh-authorized-keys

@@ -0,0 +1,2 @@
+ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIDHaBNuLS+GYGRPc9wne63Ocr+R+/Q01Y9V0FTv0RnG3
+ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPyMR0lFgiMKhQJ5aqy68nR0BQp1cNzi/wIThyuTV4a8 tsyscto@ultix-control

initializers/system-config/AuditD/auditd.conf

@@ -0,0 +1,46 @@
+#
+# Known Element Enterprises Customized Config File
+# auditd
+# Initial version 2025-06-27 
+#
+
+local_events = yes
+write_logs = yes
+log_file = /var/log/audit/audit.log
+log_group = adm
+log_format = ENRICHED
+flush = INCREMENTAL_ASYNC
+freq = 50
+max_log_file = 8
+num_logs = 5
+priority_boost = 4
+name_format = NONE
+max_log_file_action = keep_logs
+space_left = 75
+space_left_action = email
+action_mail_acct = root
+
+admin_space_left_action = halt
+disk_full_action = SUSPEND
+disk_error_action = SUSPEND
+admin_space_left = 50
+
+verify_email = yes
+use_libwrap = yes
+tcp_listen_queue = 5
+tcp_max_per_addr = 1
+tcp_client_max_idle = 0
+transport = TCP
+distribute_network = no
+q_depth = 2000
+overflow_action = SYSLOG
+max_restarts = 10
+plugin_dir = /etc/audit/plugins.d
+end_of_event_timeout = 2
+##tcp_client_ports = 1024-65535
+##tcp_listen_port = 60
+
+##krb5_key_file = /etc/audit/audit.key
+krb5_principal = auditd
+
+##name = mydomain

initializers/system-config/BANNERS/issue

@@ -0,0 +1,5 @@
+This system is the property of Known Element Enterprises LLC.
+
+Authorized uses only. All activity may be monitored and reported.
+
+All activities subject to monitoring/recording/review in real time and/or at a later time.

initializers/system-config/BANNERS/issue.net

@@ -0,0 +1,5 @@
+This system is the property of Known Element Enterprises LLC.
+
+Authorized uses only. All activity may be monitored and reported.
+
+All activities subject to monitoring/recording/review in real time and/or at a later time.

initializers/system-config/BANNERS/motd

@@ -0,0 +1,5 @@
+This system is the property of Known Element Enterprises LLC.
+
+Authorized uses only. All activity may be monitored and reported.
+
+All activities subject to monitoring/recording/review in real time and/or at a later time.

initializers/system-config/Cockpit/disallowed-users

@@ -0,0 +1,2 @@
+#/etc/cockpit/disallowed-users
+# List of users which are not allowed to login to Cockpit

initializers/system-config/DHCP/dhclient.conf

@@ -0,0 +1,6 @@
+option rfc3442-classless-static-routes code 121 = array of unsigned integer 8;
+
+send host-name = gethostname();
+request subnet-mask, broadcast-address, time-offset, routers,
+        domain-name, host-name,
+        rfc3442-classless-static-routes;

initializers/system-config/Logrotate/logrotate.conf

@@ -0,0 +1,23 @@
+# see "man logrotate" for details
+
+# global options do not affect preceding include directives
+
+# rotate log files weekly
+weekly
+
+# keep 4 weeks worth of backlogs
+rotate 4
+
+# create new (empty) log files after rotating old ones
+create 0640 root utmp
+
+# use date as a suffix of the rotated file
+#dateext
+
+# uncomment this if you want your log files compressed
+#compress
+
+# packages drop log rotation information into this directory
+include /etc/logrotate.d
+
+# system-specific logs may also be configured here.

initializers/system-config/ModProbe/cramfs.conf

@@ -0,0 +1 @@
+install cramfs /bin/true

initializers/system-config/ModProbe/dccp.conf

@@ -0,0 +1 @@
+install dccp /bin/true

initializers/system-config/ModProbe/freevxfs.conf

@@ -0,0 +1 @@
+install freevxfs /bin/true

initializers/system-config/ModProbe/hfs.conf

@@ -0,0 +1 @@
+install hfs /bin/true

initializers/system-config/ModProbe/hfsplus.conf

@@ -0,0 +1 @@
+install hfsplus /bin/true

initializers/system-config/ModProbe/jffs2.conf

@@ -0,0 +1 @@
+install jffs2 /bin/true

initializers/system-config/ModProbe/rds.conf

@@ -0,0 +1 @@
+install rds /bin/true

initializers/system-config/ModProbe/sctp.conf

@@ -0,0 +1 @@
+install sctp /bin/true

initializers/system-config/ModProbe/squashfs.conf

@@ -0,0 +1 @@
+install squashfs /bin/true

initializers/system-config/ModProbe/tipc.conf

@@ -0,0 +1 @@
+install tipc /bin/true

initializers/system-config/ModProbe/udf.conf

@@ -0,0 +1 @@
+install udf /bin/true

initializers/system-config/ModProbe/usb_storage.conf

@@ -0,0 +1 @@
+install usb-storage /bin/true

initializers/system-config/NTP/ntp.conf

@@ -0,0 +1,7 @@
+driftfile /var/lib/ntp/ntp.drift
+leapfile /usr/share/zoneinfo/leap-seconds.list
+server pfv-netboot.knel.net
+restrict 127.0.0.1
+restrict ::1
+interface ignore wildcard
+interface listen 127.0.0.1

initializers/system-config/NetworkDiscovery/lldpd

@@ -0,0 +1,2 @@
+# Uncomment to start SNMP subagent and enable CDP, SONMP and EDP protocol
+DAEMON_ARGS="-x -c -s -e"

initializers/system-config/SMTP/aliases

@@ -0,0 +1,3 @@
+# See man 5 aliases for format
+postmaster:    root
+root: coo@turnsys.com

initializers/system-config/SMTP/postfix_generic

@@ -0,0 +1 @@
+/.*/    tsysrootaccount@knel.net

initializers/system-config/SNMP/snmp-sudo.conf

@@ -0,0 +1 @@
+Debian-snmp ALL = NOPASSWD: /bin/cat

initializers/system-config/SNMP/snmpd-physicalhost.conf

@@ -0,0 +1,46 @@
+##########################################################################
+# snmpd.conf
+# Created by CNW on 11/3/2018 via snmpconf wizard and manual post tweaks
+###########################################################################
+# SECTION: Monitor Various Aspects of the Running Host
+#
+
+# disk: Check for disk space usage of a partition.
+#   The agent can check the amount of available disk space, and make
+#   sure it is above a set limit.
+#
+load  3 3 3
+rocommunity  kn3lmgmt
+sysservices 76
+
+#syslocation Rack, Room, Building, City, Country [Lat, Lon]
+syslocation R4, Server Room, SITER, Pflugerville, United States
+syscontact  coo@turnsys.com
+
+#NTP
+extend ntp-client /usr/lib/check_mk_agent/local/ntp-client
+
+#SMTP
+extend mailq /usr/lib/check_mk_agent/local/postfix-queues
+extend postfixdetailed /usr/lib/check_mk_agent/local/postfixdetailed
+
+#OS Distribution Detection
+extend distro /usr/local/bin/distro
+extend osupdate /usr/lib/check_mk_agent/local/os-updates.sh
+
+#Hardware Detection
+extend manufacturer /usr/bin/sudo /usr/bin/cat /sys/devices/virtual/dmi/id/sys_vendor
+extend hardware /usr/bin/sudo /usr/bin/cat /sys/devices/virtual/dmi/id/product_name
+extend serial /usr/bin/sudo /usr/bin/cat /sys/devices/virtual/dmi/id/product_serial
+
+#SMART
+extend smart /usr/lib/check_mk_agent/local/smart
+
+#Temperature
+pass_persist    .1.3.6.1.4.1.9.9.13.1.3 /usr/local/bin/temper-snmp
+
+# Allow Systems Management Data Engine SNMP to connect to snmpd using SMUX
+# smuxpeer .1.3.6.1.4.1.674.10892.1
+
+# LLDP collection
+master agentx

initializers/system-config/SNMP/snmpd-rpi.conf

@@ -0,0 +1,40 @@
+##########################################################################
+# snmpd.conf
+# Created by CNW on 11/3/2018 via snmpconf wizard and manual post tweaks
+###########################################################################
+# SECTION: Monitor Various Aspects of the Running Host
+#
+
+# disk: Check for disk space usage of a partition.
+#   The agent can check the amount of available disk space, and make
+#   sure it is above a set limit.
+#
+load  3 3 3
+rocommunity  kn3lmgmt
+sysservices 76
+
+#syslocation Rack, Room, Building, City, Country [Lat, Lon]
+syslocation SITER, Pflugerville, United States
+syscontact  coo@turnsys.com
+
+#NTP
+extend ntp-client /usr/lib/check_mk_agent/local/ntp-client
+
+#SMTP
+extend mailq /usr/lib/check_mk_agent/local/postfix-queues
+extend postfixdetailed /usr/lib/check_mk_agent/local/postfixdetailed
+
+#OS Distribution Detection
+extend distro /usr/local/bin/distro
+extend osupdate /usr/lib/check_mk_agent/local/os-updates.sh
+
+
+#Hardware Detection
+extend hardware /usr/bin/sudo /usr/bin/cat /sys/firmware/devicetree/base/model 
+extend serial /usr/bin/sudo /usr/bin/cat /sys/firmware/devicetree/base/serial-number
+
+# Allow Systems Management Data Engine SNMP to connect to snmpd using SMUX
+# smuxpeer .1.3.6.1.4.1.674.10892.1
+
+# LLDP collection
+master agentx

initializers/system-config/SNMP/snmpd.conf

@@ -0,0 +1,44 @@
+##########################################################################
+# snmpd.conf
+# Created by CNW on 11/3/2018 via snmpconf wizard and manual post tweaks
+###########################################################################
+# SECTION: Monitor Various Aspects of the Running Host
+#
+
+# disk: Check for disk space usage of a partition.
+#   The agent can check the amount of available disk space, and make
+#   sure it is above a set limit.
+#
+load  3 3 3
+rocommunity  kn3lmgmt
+sysservices 76
+
+#syslocation Rack, Room, Building, City, Country [Lat, Lon]
+syslocation R4, Server Room, SITER, Pflugerville, United States
+syscontact  coo@turnsys.com
+
+#NTP
+extend ntp-client /usr/lib/check_mk_agent/local/ntp-client
+
+#SMTP
+extend mailq /usr/lib/check_mk_agent/local/postfix-queues
+extend postfixdetailed /usr/lib/check_mk_agent/local/postfixdetailed
+
+#OS Distribution Detection
+extend distro /usr/local/bin/distro
+extend osupdate /usr/lib/check_mk_agent/local/os-updates.sh
+
+# Socket statistics
+extend ss /usr/lib/check_mk_agent/local/ss.py
+
+#Hardware Detection
+# (uncomment for x86 platforms)
+extend manufacturer /usr/bin/sudo /usr/bin/cat /sys/devices/virtual/dmi/id/sys_vendor
+extend hardware /usr/bin/sudo /usr/bin/cat /sys/devices/virtual/dmi/id/product_name
+extend serial /usr/bin/sudo /usr/bin/cat /sys/devices/virtual/dmi/id/product_serial
+
+# Allow Systems Management Data Engine SNMP to connect to snmpd using SMUX
+# smuxpeer .1.3.6.1.4.1.674.10892.1
+
+# LLDP collection
+master agentx

initializers/system-config/SSH/AuthorizedKeys/localuser-ssh-authorized-keys

@@ -0,0 +1,2 @@
+ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIDHaBNuLS+GYGRPc9wne63Ocr+R+/Q01Y9V0FTv0RnG3
+ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPyMR0lFgiMKhQJ5aqy68nR0BQp1cNzi/wIThyuTV4a8 tsyscto@ultix-control

initializers/system-config/SSH/AuthorizedKeys/root-ssh-authorized-keys

@@ -0,0 +1,2 @@
+ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIDHaBNuLS+GYGRPc9wne63Ocr+R+/Q01Y9V0FTv0RnG3
+ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPyMR0lFgiMKhQJ5aqy68nR0BQp1cNzi/wIThyuTV4a8 tsyscto@ultix-control

initializers/system-config/SSH/Configs/ssh-audit-hardening.conf

@@ -0,0 +1,19 @@
+# Restrict key exchange, cipher, and MAC algorithms, as per sshaudit.com
+# hardening guide.
+ KexAlgorithms sntrup761x25519-sha512,sntrup761x25519-sha512@openssh.com,curve25519-sha256,curve25519-sha256@libssh.org,gss-curve25519-sha256-,diffie-hellman-group16-sha512,gss-group16-sha512-,diffie-hellman-group18-sha512,diffie-hellman-group-exchange-sha256
+
+Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes256-ctr,aes192-ctr,aes128-gcm@openssh.com,aes128-ctr
+
+MACs hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,umac-128-etm@openssh.com
+
+HostKeyAlgorithms sk-ssh-ed25519-cert-v01@openssh.com,ssh-ed25519-cert-v01@openssh.com,rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-256-cert-v01@openssh.com,sk-ssh-ed25519@openssh.com,ssh-ed25519,rsa-sha2-512,rsa-sha2-256
+
+RequiredRSASize 3072
+
+CASignatureAlgorithms sk-ssh-ed25519@openssh.com,ssh-ed25519,rsa-sha2-512,rsa-sha2-256
+
+GSSAPIKexAlgorithms gss-curve25519-sha256-,gss-group16-sha512-
+
+HostbasedAcceptedAlgorithms sk-ssh-ed25519-cert-v01@openssh.com,ssh-ed25519-cert-v01@openssh.com,sk-ssh-ed25519@openssh.com,ssh-ed25519,rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-512,rsa-sha2-256-cert-v01@openssh.com,rsa-sha2-256
+
+PubkeyAcceptedAlgorithms sk-ssh-ed25519-cert-v01@openssh.com,ssh-ed25519-cert-v01@openssh.com,sk-ssh-ed25519@openssh.com,ssh-ed25519,rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-512,rsa-sha2-256-cert-v01@openssh.com,rsa-sha2-256

initializers/system-config/SSH/Configs/tsys-sshd-config

@@ -0,0 +1,20 @@
+Include /etc/ssh/sshd_config.d/*.conf
+HostKey /etc/ssh/ssh_host_rsa_key
+HostKey /etc/ssh/ssh_host_ed25519_key
+KbdInteractiveAuthentication no
+PrintMotd no
+PasswordAuthentication no
+AllowTcpForwarding no
+X11Forwarding no
+ChallengeResponseAuthentication no
+AcceptEnv LANG LC_*
+Subsystem       sftp    /usr/lib/openssh/sftp-server
+UsePAM yes
+Banner /etc/issue.net
+MaxAuthTries 2
+MaxStartups 10:30:100
+PermitRootLogin prohibit-password
+ClientAliveInterval 300
+ClientAliveCountMax 3
+AllowUsers root localuser subodev
+LoginGraceTime 60

initializers/system-config/Syslog/rsyslog.conf

@@ -0,0 +1,6 @@
+module(load="imuxsock") # provides support for local system logging
+module(load="imklog")   # provides kernel logging support
+#module(load="immark")  # provides --MARK-- message capability
+
+*.* @tsys-librenms.knel.net:514
+:omusrmsg:EOF

initializers/system-config/Systemd/journald.conf

@@ -0,0 +1,31 @@
+[Journal]
+#Compress=yes
+#Seal=yes
+#SplitMode=uid
+#SyncIntervalSec=5m
+#RateLimitIntervalSec=30s
+#RateLimitBurst=10000
+#SystemMaxUse=
+#SystemKeepFree=
+#SystemMaxFileSize=
+#SystemMaxFiles=100
+#RuntimeMaxUse=
+#RuntimeKeepFree=
+#RuntimeMaxFileSize=
+#RuntimeMaxFiles=100
+#MaxRetentionSec=
+#MaxFileSec=1month
+#ForwardToSyslog=yes
+#ForwardToKMsg=no
+#ForwardToConsole=no
+#ForwardToWall=yes
+#TTYPath=/dev/console
+#MaxLevelStore=debug
+#MaxLevelSyslog=debug
+#MaxLevelKMsg=notice
+#MaxLevelConsole=info
+#MaxLevelWall=emerg
+#LineMax=48K
+#ReadKMsg=yes
+#Audit=no
+Storage=persistent

initializers/system-config/ZSH/tsys-zshrc

@@ -0,0 +1,258 @@
+# ~/.zshrc file for zsh interactive shells.
+# see /usr/share/doc/zsh/examples/zshrc for examples
+
+setopt autocd              # change directory just by typing its name
+#setopt correct            # auto correct mistakes
+setopt interactivecomments # allow comments in interactive mode
+setopt magicequalsubst     # enable filename expansion for arguments of the form ‘anything=expression’
+setopt nonomatch           # hide error message if there is no match for the pattern
+setopt notify              # report the status of background jobs immediately
+setopt numericglobsort     # sort filenames numerically when it makes sense
+setopt promptsubst         # enable command substitution in prompt
+
+WORDCHARS=${WORDCHARS//\/} # Don't consider certain characters part of the word
+
+# hide EOL sign ('%')
+PROMPT_EOL_MARK=""
+
+# configure key keybindings
+bindkey -v                                        # emacs key bindings
+bindkey ' ' magic-space                           # do history expansion on space
+bindkey '^U' backward-kill-line                   # ctrl + U
+bindkey '^[[3;5~' kill-word                       # ctrl + Supr
+bindkey '^[[3~' delete-char                       # delete
+bindkey '^[[1;5C' forward-word                    # ctrl + ->
+bindkey '^[[1;5D' backward-word                   # ctrl + <-
+bindkey '^[[5~' beginning-of-buffer-or-history    # page up
+bindkey '^[[6~' end-of-buffer-or-history          # page down
+bindkey '^[[H' beginning-of-line                  # home
+bindkey '^[[F' end-of-line                        # end
+bindkey '^[[Z' undo                               # shift + tab undo last action
+
+# enable completion features
+autoload -Uz compinit
+compinit -d ~/.cache/zcompdump
+zstyle ':completion:*:*:*:*:*' menu select
+zstyle ':completion:*' auto-description 'specify: %d'
+zstyle ':completion:*' completer _expand _complete
+zstyle ':completion:*' format 'Completing %d'
+zstyle ':completion:*' group-name ''
+zstyle ':completion:*' list-colors ''
+zstyle ':completion:*' list-prompt %SAt %p: Hit TAB for more, or the character to insert%s
+zstyle ':completion:*' matcher-list 'm:{a-zA-Z}={A-Za-z}'
+zstyle ':completion:*' rehash true
+zstyle ':completion:*' select-prompt %SScrolling active: current selection at %p%s
+zstyle ':completion:*' use-compctl false
+zstyle ':completion:*' verbose true
+zstyle ':completion:*:kill:*' command 'ps -u $USER -o pid,%cpu,tty,cputime,cmd'
+
+# History configurations
+HISTFILE=~/.zsh_history
+HISTSIZE=10000
+SAVEHIST=200000
+setopt hist_expire_dups_first # delete duplicates first when HISTFILE size exceeds HISTSIZE
+setopt hist_ignore_dups       # ignore duplicated commands history list
+setopt hist_ignore_space      # ignore commands that start with space
+setopt hist_verify            # show command with history expansion to user before running it
+#setopt share_history         # share command history data
+
+# force zsh to show the complete history
+alias history="history 0"
+
+# configure `time` format
+TIMEFMT=$'\nreal\t%E\nuser\t%U\nsys\t%S\ncpu\t%P'
+
+# make less more friendly for non-text input files, see lesspipe(1)
+#[ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)"
+
+# set variable identifying the chroot you work in (used in the prompt below)
+if [ -z "${debian_chroot:-}" ] && [ -r /etc/debian_chroot ]; then
+    debian_chroot=$(cat /etc/debian_chroot)
+fi
+
+# set a fancy prompt (non-color, unless we know we "want" color)
+case "$TERM" in
+    xterm-color|*-256color) color_prompt=yes;;
+esac
+
+# uncomment for a colored prompt, if the terminal has the capability; turned
+# off by default to not distract the user: the focus in a terminal window
+# should be on the output of commands, not on the prompt
+force_color_prompt=yes
+
+if [ -n "$force_color_prompt" ]; then
+    if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then
+        # We have color support; assume it's compliant with Ecma-48
+        # (ISO/IEC-6429). (Lack of such support is extremely rare, and such
+        # a case would tend to support setf rather than setaf.)
+        color_prompt=yes
+    else
+        color_prompt=
+    fi
+fi
+
+configure_prompt() {
+    prompt_symbol=㉿
+    # Skull emoji for root terminal
+    #[ "$EUID" -eq 0 ] && prompt_symbol=💀
+    case "$PROMPT_ALTERNATIVE" in
+        twoline)
+            PROMPT=$'%F{%(#.blue.green)}┌──${debian_chroot:+($debian_chroot)─}${VIRTUAL_ENV:+($(basename $VIRTUAL_ENV))─}(%B%F{%(#.red.blue)}%n'$prompt_symbol$'%m%b%F{%(#.blue.green)})-[%B%F{reset}%(6~.%-1~/…/%4~.%5~)%b%F{%(#.blue.green)}]\n└─%B%(#.%F{red}#.%F{blue}$)%b%F{reset} '
+            # Right-side prompt with exit codes and background processes
+            #RPROMPT=$'%(?.. %? %F{red}%B⨯%b%F{reset})%(1j. %j %F{yellow}%B⚙%b%F{reset}.)'
+            ;;
+        oneline)
+            PROMPT=$'${debian_chroot:+($debian_chroot)}${VIRTUAL_ENV:+($(basename $VIRTUAL_ENV))}%B%F{%(#.red.blue)}%n@%m%b%F{reset}:%B%F{%(#.blue.green)}%~%b%F{reset}%(#.#.$) '
+            RPROMPT=
+            ;;
+        backtrack)
+            PROMPT=$'${debian_chroot:+($debian_chroot)}${VIRTUAL_ENV:+($(basename $VIRTUAL_ENV))}%B%F{red}%n@%m%b%F{reset}:%B%F{blue}%~%b%F{reset}%(#.#.$) '
+            RPROMPT=
+            ;;
+    esac
+    unset prompt_symbol
+}
+
+# The following block is surrounded by two delimiters.
+# These delimiters must not be modified. Thanks.
+# START KALI CONFIG VARIABLES
+PROMPT_ALTERNATIVE=twoline
+NEWLINE_BEFORE_PROMPT=yes
+# STOP KALI CONFIG VARIABLES
+
+if [ "$color_prompt" = yes ]; then
+    # override default virtualenv indicator in prompt
+    VIRTUAL_ENV_DISABLE_PROMPT=1
+
+    configure_prompt
+
+    # enable syntax-highlighting
+    if [ -f /usr/share/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh ]; then
+        . /usr/share/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh
+        ZSH_HIGHLIGHT_HIGHLIGHTERS=(main brackets pattern)
+        ZSH_HIGHLIGHT_STYLES[default]=none
+        ZSH_HIGHLIGHT_STYLES[unknown-token]=underline
+        ZSH_HIGHLIGHT_STYLES[reserved-word]=fg=cyan,bold
+        ZSH_HIGHLIGHT_STYLES[suffix-alias]=fg=green,underline
+        ZSH_HIGHLIGHT_STYLES[global-alias]=fg=green,bold
+        ZSH_HIGHLIGHT_STYLES[precommand]=fg=green,underline
+        ZSH_HIGHLIGHT_STYLES[commandseparator]=fg=blue,bold
+        ZSH_HIGHLIGHT_STYLES[autodirectory]=fg=green,underline
+        ZSH_HIGHLIGHT_STYLES[path]=bold
+        ZSH_HIGHLIGHT_STYLES[path_pathseparator]=
+        ZSH_HIGHLIGHT_STYLES[path_prefix_pathseparator]=
+        ZSH_HIGHLIGHT_STYLES[globbing]=fg=blue,bold
+        ZSH_HIGHLIGHT_STYLES[history-expansion]=fg=blue,bold
+        ZSH_HIGHLIGHT_STYLES[command-substitution]=none
+        ZSH_HIGHLIGHT_STYLES[command-substitution-delimiter]=fg=magenta,bold
+        ZSH_HIGHLIGHT_STYLES[process-substitution]=none
+        ZSH_HIGHLIGHT_STYLES[process-substitution-delimiter]=fg=magenta,bold
+        ZSH_HIGHLIGHT_STYLES[single-hyphen-option]=fg=green
+        ZSH_HIGHLIGHT_STYLES[double-hyphen-option]=fg=green
+        ZSH_HIGHLIGHT_STYLES[back-quoted-argument]=none
+        ZSH_HIGHLIGHT_STYLES[back-quoted-argument-delimiter]=fg=blue,bold
+        ZSH_HIGHLIGHT_STYLES[single-quoted-argument]=fg=yellow
+        ZSH_HIGHLIGHT_STYLES[double-quoted-argument]=fg=yellow
+        ZSH_HIGHLIGHT_STYLES[dollar-quoted-argument]=fg=yellow
+        ZSH_HIGHLIGHT_STYLES[rc-quote]=fg=magenta
+        ZSH_HIGHLIGHT_STYLES[dollar-double-quoted-argument]=fg=magenta,bold
+        ZSH_HIGHLIGHT_STYLES[back-double-quoted-argument]=fg=magenta,bold
+        ZSH_HIGHLIGHT_STYLES[back-dollar-quoted-argument]=fg=magenta,bold
+        ZSH_HIGHLIGHT_STYLES[assign]=none
+        ZSH_HIGHLIGHT_STYLES[redirection]=fg=blue,bold
+        ZSH_HIGHLIGHT_STYLES[comment]=fg=black,bold
+        ZSH_HIGHLIGHT_STYLES[named-fd]=none
+        ZSH_HIGHLIGHT_STYLES[numeric-fd]=none
+        ZSH_HIGHLIGHT_STYLES[arg0]=fg=cyan
+        ZSH_HIGHLIGHT_STYLES[bracket-error]=fg=red,bold
+        ZSH_HIGHLIGHT_STYLES[bracket-level-1]=fg=blue,bold
+        ZSH_HIGHLIGHT_STYLES[bracket-level-2]=fg=green,bold
+        ZSH_HIGHLIGHT_STYLES[bracket-level-3]=fg=magenta,bold
+        ZSH_HIGHLIGHT_STYLES[bracket-level-4]=fg=yellow,bold
+        ZSH_HIGHLIGHT_STYLES[bracket-level-5]=fg=cyan,bold
+        ZSH_HIGHLIGHT_STYLES[cursor-matchingbracket]=standout
+    fi
+else
+    PROMPT='${debian_chroot:+($debian_chroot)}%n@%m:%~%(#.#.$) '
+fi
+unset color_prompt force_color_prompt
+
+toggle_oneline_prompt(){
+    if [ "$PROMPT_ALTERNATIVE" = oneline ]; then
+        PROMPT_ALTERNATIVE=twoline
+    else
+        PROMPT_ALTERNATIVE=oneline
+    fi
+    configure_prompt
+    zle reset-prompt
+}
+zle -N toggle_oneline_prompt
+bindkey ^P toggle_oneline_prompt
+
+# If this is an xterm set the title to user@host:dir
+case "$TERM" in
+xterm*|rxvt*|Eterm|aterm|kterm|gnome*|alacritty)
+    TERM_TITLE=$'\e]0;${debian_chroot:+($debian_chroot)}${VIRTUAL_ENV:+($(basename $VIRTUAL_ENV))}%n@%m: %~\a'
+    ;;
+*)
+    ;;
+esac
+
+precmd() {
+    # Print the previously configured title
+    print -Pnr -- "$TERM_TITLE"
+
+    # Print a new line before the prompt, but only if it is not the first line
+    if [ "$NEWLINE_BEFORE_PROMPT" = yes ]; then
+        if [ -z "$_NEW_LINE_BEFORE_PROMPT" ]; then
+            _NEW_LINE_BEFORE_PROMPT=1
+        else
+            print ""
+        fi
+    fi
+}
+
+# enable color support of ls, less and man, and also add handy aliases
+if [ -x /usr/bin/dircolors ]; then
+    test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)"
+    export LS_COLORS="$LS_COLORS:ow=30;44:" # fix ls color for folders with 777 permissions
+
+    alias ls='ls --color=auto'
+    #alias dir='dir --color=auto'
+    #alias vdir='vdir --color=auto'
+
+    alias grep='grep --color=auto'
+    alias fgrep='fgrep --color=auto'
+    alias egrep='egrep --color=auto'
+    alias diff='diff --color=auto'
+    alias ip='ip --color=auto'
+
+    export LESS_TERMCAP_mb=$'\E[1;31m'     # begin blink
+    export LESS_TERMCAP_md=$'\E[1;36m'     # begin bold
+    export LESS_TERMCAP_me=$'\E[0m'        # reset bold/blink
+    export LESS_TERMCAP_so=$'\E[01;33m'    # begin reverse video
+    export LESS_TERMCAP_se=$'\E[0m'        # reset reverse video
+    export LESS_TERMCAP_us=$'\E[1;32m'     # begin underline
+    export LESS_TERMCAP_ue=$'\E[0m'        # reset underline
+
+    # Take advantage of $LS_COLORS for completion as well
+    zstyle ':completion:*' list-colors "${(s.:.)LS_COLORS}"
+    zstyle ':completion:*:*:kill:*:processes' list-colors '=(#b) #([0-9]#)*=0=01;31'
+fi
+
+# some more ls aliases
+alias ll='ls -l'
+alias la='ls -A'
+alias l='ls -CF'
+
+# enable auto-suggestions based on the history
+if [ -f /usr/share/zsh-autosuggestions/zsh-autosuggestions.zsh ]; then
+    . /usr/share/zsh-autosuggestions/zsh-autosuggestions.zsh
+    # change suggestion color
+    ZSH_AUTOSUGGEST_HIGHLIGHT_STYLE='fg=#999'
+fi
+
+# enable command-not-found if installed
+if [ -f /etc/zsh_command_not_found ]; then
+    . /etc/zsh_command_not_found
+fi

initializers/system-config/apply

@@ -0,0 +1,96 @@
+#!/bin/bash
+
+# KNEL System Configuration Initializer
+# Applies system-wide configuration files with conditional logic
+
+set -euo pipefail
+
+echo "Running system configuration initializer..."
+
+# Create necessary directories
+mkdir -p $ROOT_SSH_DIR
+
+# Deploy system configuration files from copied templates
+if [[ -f ./ConfigFiles/ZSH/tsys-zshrc ]]; then
+    cp ./ConfigFiles/ZSH/tsys-zshrc /etc/zshrc
+fi
+
+if [[ -f ./ConfigFiles/SMTP/aliases ]]; then
+    cp ./ConfigFiles/SMTP/aliases /etc/aliases
+    newaliases
+fi
+
+if [[ -f ./ConfigFiles/Syslog/rsyslog.conf ]]; then
+    cp ./ConfigFiles/Syslog/rsyslog.conf > /etc/rsyslog.conf
+fi
+
+# Configure DHCP client
+if [[ -f ./ConfigFiles/DHCP/dhclient.conf ]]; then
+    cp ./ConfigFiles/DHCP/dhclient.conf > /etc/dhcp/dhclient.conf
+fi
+
+# Configure SNMP
+systemctl stop snmpd 2>/dev/null || true
+/etc/init.d/snmpd stop 2>/dev/null || true
+
+if [[ -f ./ConfigFiles/SNMP/snmp-sudo.conf ]]; then
+    cp ./ConfigFiles/SNMP/snmp-sudo.conf > /etc/sudoers.d/Debian-snmp
+fi
+
+# Adjust SNMP service for log verbosity
+sed -i "s|-Lsd|-LS6d|" /lib/systemd/system/snmpd.service
+
+# Configure SNMP based on system type (with pi-detect)
+if command -v vcgencmd >/dev/null 2>&1; then
+    export IS_RASPI="1"
+else
+    export IS_RASPI="0"
+fi
+
+if [[ $IS_RASPI -eq 1 ]] && [[ -f ./ConfigFiles/SNMP/snmpd-rpi.conf ]]; then
+    cp ./ConfigFiles/SNMP/snmpd-rpi.conf /etc/snmp/snmpd.conf
+elif [[ $IS_PHYSICAL_HOST -eq 1 ]] && [[ -f ./ConfigFiles/SNMP/snmpd-physicalhost.conf ]]; then
+    cp ./ConfigFiles/SNMP/snmpd-physicalhost.conf /etc/snmp/snmpd.conf
+elif [[ $IS_VIRT_GUEST -eq 1 ]] && [[ -f ./ConfigFiles/SNMP/snmpd.conf ]]; then
+    cp ./ConfigFiles/SNMP/snmpd.conf /etc/snmp/snmpd.conf
+fi
+
+# Configure lldpd
+if [[ -f ./ConfigFiles/NetworkDiscovery/lldpd ]]; then
+    cp ./ConfigFiles/NetworkDiscovery/lldpd /etc/default/lldpd
+    systemctl restart lldpd
+fi
+
+# Configure Cockpit
+if [[ -f ./ConfigFiles/Cockpit/disallowed-users ]]; then
+    cp ./ConfigFiles/Cockpit/disallowed-users /etc/cockpit/disallowed-users
+    systemctl restart cockpit
+fi
+
+# Configure NTP for non-NTP servers
+if [[ $NTP_SERVER_CHECK -eq 0 ]] && [[ -f ./ConfigFiles/NTP/ntp.conf ]]; then
+    cp ./ConfigFiles/NTP/ntp.conf /etc/ntpsec/ntp.conf
+    systemctl restart ntpsec.service
+fi
+
+# Always install rsyslog (removed librenms conditional)
+DEBIAN_FRONTEND="noninteractive" apt-get -qq --yes -o Dpkg::Options::="--force-confold" install rsyslog
+systemctl stop rsyslog
+systemctl start rsyslog
+
+# Reload systemd and restart SNMP
+systemctl daemon-reload
+systemctl restart snmpd 2>/dev/null || true
+/etc/init.d/snmpd restart 2>/dev/null || true
+
+# Performance tuning based on system type
+if [[ $IS_PHYSICAL_HOST -gt 0 ]]; then
+    cpufreq-set -r -g performance
+    cpupower frequency-set --governor performance
+fi
+
+if [[ $IS_VIRT_GUEST -eq 1 ]]; then
+    tuned-adm profile virtual-guest
+fi
+
+echo "System configuration initializer completed"

initializers/system-config/templates/aliases

@@ -0,0 +1,3 @@
+# See man 5 aliases for format
+postmaster:    root
+root: coo@turnsys.com

initializers/system-config/templates/rsyslog.conf

@@ -0,0 +1,6 @@
+module(load="imuxsock") # provides support for local system logging
+module(load="imklog")   # provides kernel logging support
+#module(load="immark")  # provides --MARK-- message capability
+
+*.* @tsys-librenms.knel.net:514
+:omusrmsg:EOF

initializers/system-config/templates/zshrc

@@ -0,0 +1,258 @@
+# ~/.zshrc file for zsh interactive shells.
+# see /usr/share/doc/zsh/examples/zshrc for examples
+
+setopt autocd              # change directory just by typing its name
+#setopt correct            # auto correct mistakes
+setopt interactivecomments # allow comments in interactive mode
+setopt magicequalsubst     # enable filename expansion for arguments of the form ‘anything=expression’
+setopt nonomatch           # hide error message if there is no match for the pattern
+setopt notify              # report the status of background jobs immediately
+setopt numericglobsort     # sort filenames numerically when it makes sense
+setopt promptsubst         # enable command substitution in prompt
+
+WORDCHARS=${WORDCHARS//\/} # Don't consider certain characters part of the word
+
+# hide EOL sign ('%')
+PROMPT_EOL_MARK=""
+
+# configure key keybindings
+bindkey -v                                        # emacs key bindings
+bindkey ' ' magic-space                           # do history expansion on space
+bindkey '^U' backward-kill-line                   # ctrl + U
+bindkey '^[[3;5~' kill-word                       # ctrl + Supr
+bindkey '^[[3~' delete-char                       # delete
+bindkey '^[[1;5C' forward-word                    # ctrl + ->
+bindkey '^[[1;5D' backward-word                   # ctrl + <-
+bindkey '^[[5~' beginning-of-buffer-or-history    # page up
+bindkey '^[[6~' end-of-buffer-or-history          # page down
+bindkey '^[[H' beginning-of-line                  # home
+bindkey '^[[F' end-of-line                        # end
+bindkey '^[[Z' undo                               # shift + tab undo last action
+
+# enable completion features
+autoload -Uz compinit
+compinit -d ~/.cache/zcompdump
+zstyle ':completion:*:*:*:*:*' menu select
+zstyle ':completion:*' auto-description 'specify: %d'
+zstyle ':completion:*' completer _expand _complete
+zstyle ':completion:*' format 'Completing %d'
+zstyle ':completion:*' group-name ''
+zstyle ':completion:*' list-colors ''
+zstyle ':completion:*' list-prompt %SAt %p: Hit TAB for more, or the character to insert%s
+zstyle ':completion:*' matcher-list 'm:{a-zA-Z}={A-Za-z}'
+zstyle ':completion:*' rehash true
+zstyle ':completion:*' select-prompt %SScrolling active: current selection at %p%s
+zstyle ':completion:*' use-compctl false
+zstyle ':completion:*' verbose true
+zstyle ':completion:*:kill:*' command 'ps -u $USER -o pid,%cpu,tty,cputime,cmd'
+
+# History configurations
+HISTFILE=~/.zsh_history
+HISTSIZE=10000
+SAVEHIST=200000
+setopt hist_expire_dups_first # delete duplicates first when HISTFILE size exceeds HISTSIZE
+setopt hist_ignore_dups       # ignore duplicated commands history list
+setopt hist_ignore_space      # ignore commands that start with space
+setopt hist_verify            # show command with history expansion to user before running it
+#setopt share_history         # share command history data
+
+# force zsh to show the complete history
+alias history="history 0"
+
+# configure `time` format
+TIMEFMT=$'\nreal\t%E\nuser\t%U\nsys\t%S\ncpu\t%P'
+
+# make less more friendly for non-text input files, see lesspipe(1)
+#[ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)"
+
+# set variable identifying the chroot you work in (used in the prompt below)
+if [ -z "${debian_chroot:-}" ] && [ -r /etc/debian_chroot ]; then
+    debian_chroot=$(cat /etc/debian_chroot)
+fi
+
+# set a fancy prompt (non-color, unless we know we "want" color)
+case "$TERM" in
+    xterm-color|*-256color) color_prompt=yes;;
+esac
+
+# uncomment for a colored prompt, if the terminal has the capability; turned
+# off by default to not distract the user: the focus in a terminal window
+# should be on the output of commands, not on the prompt
+force_color_prompt=yes
+
+if [ -n "$force_color_prompt" ]; then
+    if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then
+        # We have color support; assume it's compliant with Ecma-48
+        # (ISO/IEC-6429). (Lack of such support is extremely rare, and such
+        # a case would tend to support setf rather than setaf.)
+        color_prompt=yes
+    else
+        color_prompt=
+    fi
+fi
+
+configure_prompt() {
+    prompt_symbol=㉿
+    # Skull emoji for root terminal
+    #[ "$EUID" -eq 0 ] && prompt_symbol=💀
+    case "$PROMPT_ALTERNATIVE" in
+        twoline)
+            PROMPT=$'%F{%(#.blue.green)}┌──${debian_chroot:+($debian_chroot)─}${VIRTUAL_ENV:+($(basename $VIRTUAL_ENV))─}(%B%F{%(#.red.blue)}%n'$prompt_symbol$'%m%b%F{%(#.blue.green)})-[%B%F{reset}%(6~.%-1~/…/%4~.%5~)%b%F{%(#.blue.green)}]\n└─%B%(#.%F{red}#.%F{blue}$)%b%F{reset} '
+            # Right-side prompt with exit codes and background processes
+            #RPROMPT=$'%(?.. %? %F{red}%B⨯%b%F{reset})%(1j. %j %F{yellow}%B⚙%b%F{reset}.)'
+            ;;
+        oneline)
+            PROMPT=$'${debian_chroot:+($debian_chroot)}${VIRTUAL_ENV:+($(basename $VIRTUAL_ENV))}%B%F{%(#.red.blue)}%n@%m%b%F{reset}:%B%F{%(#.blue.green)}%~%b%F{reset}%(#.#.$) '
+            RPROMPT=
+            ;;
+        backtrack)
+            PROMPT=$'${debian_chroot:+($debian_chroot)}${VIRTUAL_ENV:+($(basename $VIRTUAL_ENV))}%B%F{red}%n@%m%b%F{reset}:%B%F{blue}%~%b%F{reset}%(#.#.$) '
+            RPROMPT=
+            ;;
+    esac
+    unset prompt_symbol
+}
+
+# The following block is surrounded by two delimiters.
+# These delimiters must not be modified. Thanks.
+# START KALI CONFIG VARIABLES
+PROMPT_ALTERNATIVE=twoline
+NEWLINE_BEFORE_PROMPT=yes
+# STOP KALI CONFIG VARIABLES
+
+if [ "$color_prompt" = yes ]; then
+    # override default virtualenv indicator in prompt
+    VIRTUAL_ENV_DISABLE_PROMPT=1
+
+    configure_prompt
+
+    # enable syntax-highlighting
+    if [ -f /usr/share/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh ]; then
+        . /usr/share/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh
+        ZSH_HIGHLIGHT_HIGHLIGHTERS=(main brackets pattern)
+        ZSH_HIGHLIGHT_STYLES[default]=none
+        ZSH_HIGHLIGHT_STYLES[unknown-token]=underline
+        ZSH_HIGHLIGHT_STYLES[reserved-word]=fg=cyan,bold
+        ZSH_HIGHLIGHT_STYLES[suffix-alias]=fg=green,underline
+        ZSH_HIGHLIGHT_STYLES[global-alias]=fg=green,bold
+        ZSH_HIGHLIGHT_STYLES[precommand]=fg=green,underline
+        ZSH_HIGHLIGHT_STYLES[commandseparator]=fg=blue,bold
+        ZSH_HIGHLIGHT_STYLES[autodirectory]=fg=green,underline
+        ZSH_HIGHLIGHT_STYLES[path]=bold
+        ZSH_HIGHLIGHT_STYLES[path_pathseparator]=
+        ZSH_HIGHLIGHT_STYLES[path_prefix_pathseparator]=
+        ZSH_HIGHLIGHT_STYLES[globbing]=fg=blue,bold
+        ZSH_HIGHLIGHT_STYLES[history-expansion]=fg=blue,bold
+        ZSH_HIGHLIGHT_STYLES[command-substitution]=none
+        ZSH_HIGHLIGHT_STYLES[command-substitution-delimiter]=fg=magenta,bold
+        ZSH_HIGHLIGHT_STYLES[process-substitution]=none
+        ZSH_HIGHLIGHT_STYLES[process-substitution-delimiter]=fg=magenta,bold
+        ZSH_HIGHLIGHT_STYLES[single-hyphen-option]=fg=green
+        ZSH_HIGHLIGHT_STYLES[double-hyphen-option]=fg=green
+        ZSH_HIGHLIGHT_STYLES[back-quoted-argument]=none
+        ZSH_HIGHLIGHT_STYLES[back-quoted-argument-delimiter]=fg=blue,bold
+        ZSH_HIGHLIGHT_STYLES[single-quoted-argument]=fg=yellow
+        ZSH_HIGHLIGHT_STYLES[double-quoted-argument]=fg=yellow
+        ZSH_HIGHLIGHT_STYLES[dollar-quoted-argument]=fg=yellow
+        ZSH_HIGHLIGHT_STYLES[rc-quote]=fg=magenta
+        ZSH_HIGHLIGHT_STYLES[dollar-double-quoted-argument]=fg=magenta,bold
+        ZSH_HIGHLIGHT_STYLES[back-double-quoted-argument]=fg=magenta,bold
+        ZSH_HIGHLIGHT_STYLES[back-dollar-quoted-argument]=fg=magenta,bold
+        ZSH_HIGHLIGHT_STYLES[assign]=none
+        ZSH_HIGHLIGHT_STYLES[redirection]=fg=blue,bold
+        ZSH_HIGHLIGHT_STYLES[comment]=fg=black,bold
+        ZSH_HIGHLIGHT_STYLES[named-fd]=none
+        ZSH_HIGHLIGHT_STYLES[numeric-fd]=none
+        ZSH_HIGHLIGHT_STYLES[arg0]=fg=cyan
+        ZSH_HIGHLIGHT_STYLES[bracket-error]=fg=red,bold
+        ZSH_HIGHLIGHT_STYLES[bracket-level-1]=fg=blue,bold
+        ZSH_HIGHLIGHT_STYLES[bracket-level-2]=fg=green,bold
+        ZSH_HIGHLIGHT_STYLES[bracket-level-3]=fg=magenta,bold
+        ZSH_HIGHLIGHT_STYLES[bracket-level-4]=fg=yellow,bold
+        ZSH_HIGHLIGHT_STYLES[bracket-level-5]=fg=cyan,bold
+        ZSH_HIGHLIGHT_STYLES[cursor-matchingbracket]=standout
+    fi
+else
+    PROMPT='${debian_chroot:+($debian_chroot)}%n@%m:%~%(#.#.$) '
+fi
+unset color_prompt force_color_prompt
+
+toggle_oneline_prompt(){
+    if [ "$PROMPT_ALTERNATIVE" = oneline ]; then
+        PROMPT_ALTERNATIVE=twoline
+    else
+        PROMPT_ALTERNATIVE=oneline
+    fi
+    configure_prompt
+    zle reset-prompt
+}
+zle -N toggle_oneline_prompt
+bindkey ^P toggle_oneline_prompt
+
+# If this is an xterm set the title to user@host:dir
+case "$TERM" in
+xterm*|rxvt*|Eterm|aterm|kterm|gnome*|alacritty)
+    TERM_TITLE=$'\e]0;${debian_chroot:+($debian_chroot)}${VIRTUAL_ENV:+($(basename $VIRTUAL_ENV))}%n@%m: %~\a'
+    ;;
+*)
+    ;;
+esac
+
+precmd() {
+    # Print the previously configured title
+    print -Pnr -- "$TERM_TITLE"
+
+    # Print a new line before the prompt, but only if it is not the first line
+    if [ "$NEWLINE_BEFORE_PROMPT" = yes ]; then
+        if [ -z "$_NEW_LINE_BEFORE_PROMPT" ]; then
+            _NEW_LINE_BEFORE_PROMPT=1
+        else
+            print ""
+        fi
+    fi
+}
+
+# enable color support of ls, less and man, and also add handy aliases
+if [ -x /usr/bin/dircolors ]; then
+    test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)"
+    export LS_COLORS="$LS_COLORS:ow=30;44:" # fix ls color for folders with 777 permissions
+
+    alias ls='ls --color=auto'
+    #alias dir='dir --color=auto'
+    #alias vdir='vdir --color=auto'
+
+    alias grep='grep --color=auto'
+    alias fgrep='fgrep --color=auto'
+    alias egrep='egrep --color=auto'
+    alias diff='diff --color=auto'
+    alias ip='ip --color=auto'
+
+    export LESS_TERMCAP_mb=$'\E[1;31m'     # begin blink
+    export LESS_TERMCAP_md=$'\E[1;36m'     # begin bold
+    export LESS_TERMCAP_me=$'\E[0m'        # reset bold/blink
+    export LESS_TERMCAP_so=$'\E[01;33m'    # begin reverse video
+    export LESS_TERMCAP_se=$'\E[0m'        # reset reverse video
+    export LESS_TERMCAP_us=$'\E[1;32m'     # begin underline
+    export LESS_TERMCAP_ue=$'\E[0m'        # reset underline
+
+    # Take advantage of $LS_COLORS for completion as well
+    zstyle ':completion:*' list-colors "${(s.:.)LS_COLORS}"
+    zstyle ':completion:*:*:kill:*:processes' list-colors '=(#b) #([0-9]#)*=0=01;31'
+fi
+
+# some more ls aliases
+alias ll='ls -l'
+alias la='ls -A'
+alias l='ls -CF'
+
+# enable auto-suggestions based on the history
+if [ -f /usr/share/zsh-autosuggestions/zsh-autosuggestions.zsh ]; then
+    . /usr/share/zsh-autosuggestions/zsh-autosuggestions.zsh
+    # change suggestion color
+    ZSH_AUTOSUGGEST_HIGHLIGHT_STYLE='fg=#999'
+fi
+
+# enable command-not-found if installed
+if [ -f /etc/zsh_command_not_found ]; then
+    . /etc/zsh_command_not_found
+fi

initializers/user-configuration/apply

@@ -0,0 +1,26 @@
+#!/bin/bash
+
+# KNEL User Configuration Initializer
+# Configures user shells and other user-specific settings
+
+set -euo pipefail
+
+echo "Running user configuration initializer..."
+
+# Change shell to zsh for root
+chsh -s $(which zsh) root
+
+# Change shell to zsh for localuser if exists
+if [[ $LOCALUSER_CHECK -gt 0 ]]; then
+    chsh -s "$(which zsh)" localuser
+fi
+
+# Change shell to zsh for subodev if exists
+if [[ $SUBODEV_CHECK -gt 0 ]]; then
+    chsh -s "$(which zsh)" subodev
+fi
+
+# Enable accounting
+/usr/sbin/accton on
+
+echo "User configuration initializer completed"

initializers/wazuh/apply

@@ -0,0 +1,44 @@
+#!/bin/bash
+
+# KNEL Wazuh Security Module
+# Deploys and configures Wazuh security monitoring
+
+set -euo pipefail
+
+echo "Running Wazuh security module..."
+
+# Check if this is the Wazuh server
+export TSYS_NSM_CHECK="$(hostname | grep -c tsys-nsm || echo 0)"
+
+if [[ $TSYS_NSM_CHECK -eq 0 ]]; then
+    echo "Setting up Wazuh agent..."
+    
+    # Remove existing keyring if present
+    if [[ -f /usr/share/keyrings/wazuh.gpg ]]; then
+        rm -f /usr/share/keyrings/wazuh.gpg
+    fi
+    
+    # Add Wazuh repository
+    curl -s https://packages.wazuh.com/key/GPG-KEY-WAZUH | gpg --no-default-keyring --keyring gnupg-ring:/usr/share/keyrings/wazuh.gpg --import
+    chmod 644 /usr/share/keyrings/wazuh.gpg
+    echo "deb [signed-by=/usr/share/keyrings/wazuh.gpg] https://packages.wazuh.com/4.x/apt/ stable main" > /etc/apt/sources.list.d/wazuh.list
+    
+    # Install Wazuh agent
+    apt-get update
+    DEBIAN_FRONTEND="noninteractive" apt-get -y install wazuh-agent
+    
+    # Configure Wazuh agent
+    if [[ -f ./configs/wazuh-agent.conf ]]; then
+        cp ./configs/wazuh-agent.conf /var/ossec/etc/ossec.conf
+    fi
+    
+    # Start and enable Wazuh agent
+    systemctl daemon-reload
+    systemctl enable wazuh-agent
+    systemctl restart wazuh-agent
+    
+else
+    echo "This is a Wazuh server, skipping agent setup"
+fi
+
+echo "Wazuh security module completed"