automations.yaml

@@ -79,14 +79,25 @@
     - sensor.pfv_ups_runtime_minutes
     - sensor.pfv_tripp_lite_runtime_minutes
     below: 10
+  # 5-min level re-check: numeric_state alone fires only on the threshold
+  # CROSSING — a blip at that minute (or an HA restart mid-outage) would
+  # silence the page for the whole discharge. Level-based polling turns
+  # this into an escalation ladder while the outage persists.
+  - trigger: time_pattern
+    minutes: /5
   conditions:
   - condition: template
     value_template: >-
-      {% set status_map = {
+      {% set ns = namespace(hit=false) %}
-           'sensor.pfv_ups_runtime_minutes': 'sensor.tsys1_ups_status',
+      {% for rt, st in [
-           'sensor.pfv_tripp_lite_runtime_minutes': 'sensor.tsys1_triplite_status'} %}
+           ('sensor.pfv_ups_runtime_minutes', 'sensor.tsys1_ups_status'),
-      {{ states(status_map.get(trigger.entity_id, 'sensor.tsys1_ups_status'))
+           ('sensor.pfv_tripp_lite_runtime_minutes', 'sensor.tsys1_triplite_status')] %}
-         not in ['Online', 'OL', 'unknown', 'unavailable'] }}
+        {% if is_number(states(rt)) and (states(rt) | float) < 10
+              and states(st) not in ['Online', 'OL', 'unknown', 'unavailable'] %}
+          {% set ns.hit = true %}
+        {% endif %}
+      {% endfor %}
+      {{ ns.hit }}
   actions:
   - action: notify.send_message
     target:

packages/ups_shutdown.yaml

@@ -20,6 +20,10 @@
 # ============================================================================
 
 input_boolean:
+  # NOTE: `initial:` wins over restored state at EVERY HA start — a deploy
+  # mid-test silently reverts these to the safe defaults (armed OFF,
+  # dry-run ON). Safe direction, but re-arm after any restart during the
+  # supervised Sept 11-12 live test.
   pfv_ups_shutdown_armed:
     name: UPS shutdown chain ARMED
     description: Founder-level arm. ON + dry-run OFF = real shutdown dispatch.
@@ -61,26 +65,39 @@ automation:
           - sensor.tsys1_ups_battery_charge
           - sensor.tsys1_triplite_battery_charge
         below: 50
+      # 5-min level re-check — same edge-vs-level reasoning as the
+      # runtime-low alert: never let a threshold-crossing blip silence
+      # the plan page for an entire discharge.
+      - trigger: time_pattern
+        minutes: /5
     conditions:
       - condition: template
         value_template: >-
-          {% set sm = {
+          {% set ns = namespace(hit=false) %}
-               'sensor.pfv_ups_runtime_minutes': 'sensor.tsys1_ups_status',
+          {% for rt, st in [
-               'sensor.pfv_tripp_lite_runtime_minutes': 'sensor.tsys1_triplite_status',
+               ('sensor.pfv_ups_runtime_minutes', 'sensor.tsys1_ups_status'),
-               'sensor.tsys1_ups_battery_charge': 'sensor.tsys1_ups_status',
+               ('sensor.pfv_tripp_lite_runtime_minutes', 'sensor.tsys1_triplite_status')] %}
-               'sensor.tsys1_triplite_battery_charge': 'sensor.tsys1_triplite_status'} %}
+            {% if is_number(states(rt)) and (states(rt) | float) < 20
-          {{ states(sm.get(trigger.entity_id, 'sensor.tsys1_ups_status'))
+                  and states(st) not in ['Online', 'OL', 'unknown', 'unavailable'] %}
-             not in ['Online', 'OL', 'unknown', 'unavailable'] }}
+              {% set ns.hit = true %}
+            {% endif %}
+          {% endfor %}
+          {% for ch, st in [
+               ('sensor.tsys1_ups_battery_charge', 'sensor.tsys1_ups_status'),
+               ('sensor.tsys1_triplite_battery_charge', 'sensor.tsys1_triplite_status')] %}
+            {% if is_number(states(ch)) and (states(ch) | float) < 50
+                  and states(st) not in ['Online', 'OL', 'unknown', 'unavailable'] %}
+              {% set ns.hit = true %}
+            {% endif %}
+          {% endfor %}
+          {{ ns.hit }}
+      # Status 'unavailable' suppresses (anti-noise); UPS COMMS LOST covers
+      # that failure mode separately after 5 min.
       - condition: template
         value_template: >-
           {{ states('input_datetime.pfv_ups_shutdown_last_page') in ['unknown', 'unavailable', 'none']
              or as_timestamp(now()) - as_timestamp(states('input_datetime.pfv_ups_shutdown_last_page')) > 21600 }}
     actions:
-      - action: input_datetime.set_datetime
-        target:
-          entity_id: input_datetime.pfv_ups_shutdown_last_page
-        data:
-          datetime: "{{ now().strftime('%Y-%m-%d %H:%M:%S') }}"
       - variables:
           execute_mode: >-
             {{ is_state('input_boolean.pfv_ups_shutdown_armed', 'on')
@@ -97,7 +114,8 @@ automation:
                (ca LAST — signing path for everything above)
             5. pfv-bms VM 100 LAST of the VMs — the brain stays up until now
             6. Hypervisors: iDRAC graceful off tsys6/tsys7 (PowerEdge);
-               tsys1/3/4/5/9 idle out on UPS exhaustion (OptiPlex/Precision)
+               tsys1, tsys3, tsys4, tsys5, tsys9 idle out on UPS exhaustion
+               (OptiPlex/Precision, no BMC)
           mode_note: >-
             {{ 'MODE: EXECUTE (armed, live dispatch)' if execute_mode
                else 'MODE: DRY RUN (plan only — nothing will be shut down)' }}
@@ -122,3 +140,10 @@ automation:
         data:
           title: "{{ 'UPS SHUTDOWN EXECUTING' if execute_mode else 'UPS SHUTDOWN PLAN (dry run)' }}"
           message: "{{ plan }}"
+      # Suppression stamp set LAST — a failed notify must not suppress the
+      # next 5-min re-page cycle.
+      - action: input_datetime.set_datetime
+        target:
+          entity_id: input_datetime.pfv_ups_shutdown_last_page
+        data:
+          datetime: "{{ now().strftime('%Y-%m-%d %H:%M:%S') }}"

tests/test_sdlc.sh

@@ -63,17 +63,30 @@ t "trend sensors fed from smoothed sources" \
 t "runtime-low covers Tripp Lite" \
   "sed -n '/id: pfv_plant_ups_runtime_low/,/^  mode:/p' automations.yaml | grep -q 'sensor.pfv_tripp_lite_runtime_minutes'"
 t "runtime-low status check maps per-UPS" \
-  "sed -n '/id: pfv_plant_ups_runtime_low/,/^  mode:/p' automations.yaml | grep -q 'status_map'"
+  "sed -n '/id: pfv_plant_ups_runtime_low/,/^  mode:/p' automations.yaml | grep -q \"sensor.pfv_tripp_lite_runtime_minutes', 'sensor.tsys1_triplite_status'\""
 
 echo "=== UPS shutdown chain (#790 — dry-run is the shipped mode) ==="
 t "shutdown chain package present, dry-run default ON" \
   "grep -q 'id: pfv_ups_shutdown_plan' packages/ups_shutdown.yaml && grep -A4 'pfv_ups_shutdown_dry_run:' packages/ups_shutdown.yaml | grep -q 'initial: true'"
 t "armed switch default OFF" \
   "grep -A4 'pfv_ups_shutdown_armed:' packages/ups_shutdown.yaml | grep -q 'initial: false'"
-t "plan covers all seven hypervisors" \
+# Host coverage must hold in the PLAN BODY, not the header comment —
-  "for h in tsys1 tsys3 tsys4 tsys5 tsys6 tsys7 tsys9; do grep -q \$h packages/ups_shutdown.yaml || exit 1; done"
+# scope the grep to the plan template variable.
+PLAN_OK=1
+for h in tsys1 tsys3 tsys4 tsys5 tsys6 tsys7 tsys9; do
+  # full-read grep (not -q): the script runs with pipefail — -q's early
+  # exit SIGPIPEs sed and flips the pipeline status to 141
+  sed -n '/plan: >-/,/mode_note:/p' packages/ups_shutdown.yaml | grep "$h" >/dev/null || PLAN_OK=0
+done
+t "plan covers all seven hypervisors (plan body)" "[ \$PLAN_OK -eq 1 ]"
 t "pfv-bms VM 100 ordered last of the VMs (#455)" \
   "grep -q 'pfv-bms VM 100 LAST' packages/ups_shutdown.yaml"
 
+echo "=== level-based re-checks (review finding: edge-only triggers miss pages) ==="
+t "runtime-low re-polls every 5 min" \
+  "sed -n '/id: pfv_plant_ups_runtime_low/,/^  mode:/p' automations.yaml | grep -q 'minutes: /5'"
+t "shutdown chain re-polls every 5 min" \
+  "grep -A30 'id: pfv_ups_shutdown_plan' packages/ups_shutdown.yaml | grep -q 'minutes: /5'"
+
 echo "=== SDLC SUITE: $FAIL failures ==="
 exit "$FAIL"