examples : vim plugin and LSP server (#1144)
* Initial proof of concept Vim plugin
At present, this is likely only slightly better than feature parity with
the existing whisper.nvim
Known issues:
Trailing whitespace
Up to an existing length(5 seconds) of speech may be processed when
listening is enabled
CPU cycles are spent processing speech even when not listening.
Fixing these issues is likely dependent upon future efforts to create a
dedicated library instead of wrapping examples/stream
* Support $WHISPER_CPP_HOME environment variable
A minor misunderstanding of the whisper.nvim implementation resulted in
a plugin that was functional, but not a drop in replacement as it should
be now.
* Initial progress on LSP implementation
Libcall is nonviable because the library is immediately freed after a
call is made. Further investigation has shown Language Server Protocol as
a promising alternative that both simplifies the required logic on the
vimscript side and increases the ease with which plugins for other
editors could be made in the future. This is a very large undertaking
and my progress has slowed substantially.
Work is far from being in a usable state, but I wish to keep track of
major refactors for organizational purposes.
* Rewrite audio windowing of guided transcription
One of the defining goals of this venture is allowing consecutive
commands to be rattled off without the existing deadzones of the current
implementation.
* Add unguided_transcription. Cleanup.
The unguided transcription implantation heavily borrows from existing
example implementations and the guided_transcription logic.
A high level pass was done to check that method arguments are accurate
to what inputs are actually required.
A first attempt at cancellation support was added for record keeping,
but will be deleted in a future commit.
* Fix compilation.
Resolves a large number of compilation errors.
No testing has been done yet for execution errors.
Update Makefile and .gitignore
* Functional unguided_transcription
* Functional guided_transcription
Fix commandset_list being passed by value
Properly register the first token of a multitoken command
* Minor changes before time fix
I've apparently made an awfully major mistake in thinking that unix time
was in milliseconds and will be changing all timekeeping code to use
standardized methods.
In preparation for this is a number of minor bugfixes.
Output is manually flushed.
An echo method has been added.
registerCommandset now wraps the returned index
* Swap timekeeping to use std::chrono
* Add work in progress lsp backed whisper.vim plugin
Current progress blockers are
Adding modality awareness to the command processing
(specifically, motion prompting)
Improving the VAD to be a little more responsive
(testing start of activity)
* Reworked vim plugin command loop
* Fix change inside
Multiple bug fixes that, crucially, bring the plugin to the point where a
demonstration video is possible
Add better echo messaging so whisper_log isn't required
Add loading complete message as indicator when listening has started
Insert/append are actually included in command sets
Some more heavy handed corrections to prevent a double exit when leaving
insert mode
As a somewhat hacky fix, the very first space is removed when inserting.
This cleans up most use cases, but leaves me unsatisfied with the few
cases it would be desired.
* Forcibly set commandset_index to 0 after subinsert
Also remove unnecessary ! to use builtin vim command
* Fix upper
A minor scope mistake was causing upper'd inputs to be eaten.
This was fixed and echoing was slightly improved for clarity.
* Fix formatting
Corrects indentation to 4 spaces as project standard
Slightly better error support for malformed json input
* Remove obsolete vim plugin
* Add json.hpp library
The same library that is used for the llama.cpp server
* Minor cleanups
add lsp to the make clean directive.
remove a redundant params definition.
reorder whisper.vim logging for subtranscriptions
Corrections to unlets (variables of argument scope appear immutable)
* Fix indentation. Fallback for subTranscription
Indentation has been changed to 4 spaces.
Unit testing has been set up, I'm opting not to include it in the
repository for now.
It however, has revealed a bug in the state logic where a
subtranscription can be initiated without having a saved command
When this occurs, append is added as a fallback
* Move audio polling logic to a subfunction
While work on the improved vad will continue, It's grown to be a little
out of scope. Instead, a future commit will perform multiple detection
passes at substretches of audio when a backlog of audio exists.
To facilitate this, and prevent code duplication, the vad code has been
moved into a subfunction shared by both the unguided and guided
transcription functions.
* Test for voice over subchunks if backlog > 1s
As the existing VAD implementation only checks for a falling edge at the
end of an audio chunk. It fails to detect voice in cases where the
recorded voice is only at the beginning of the audio.
To ameliorate this, when the timestamp would cause analysis of audio
over a second in length, it is split into 1 second length subchunks
which are individually tested.
Results are promising, but there seems to be a remaining bug with
unguided transcription likely related to saving context
* Limit the maximum length of audio input.
This existing VAD implementation only detects falling edges, which
means any gap in the users speaking is processed for transcription.
This simply establishes a constant maximum length depending on the type
of transcription. Uguided gets a generous 10 seconds and guided, 2.
While quick testing showed that commands are generally around a half a
second to a second, limiting commands to an even second resulted in
extreme degradation of quality. (Seemingly always the same output for a
given commandset)
* Unguided timestamp tracking, cleanup
Unguided transcriptions where not setup to allow for passing of
timestamp data forward, but have been corrected.
No_context is now always set to false. While conceptually desirable for
the quality of guided transcription, It was seemingly responsible for
prior command inputs ghosting in unguided transcription.
Save and Run are now tracked by command number instead of command text.
While command_text was provided for convenience, I wish to keep command
index authoritative. This gives greater consistency and potentially
allows for end users to rename or even translate the spoken versions of
these commands
* By default, maintain mode.
Previously, mode was reset to 0 unless otherwise set.
In addition to causing some edge cases, this was didn't mesh well with
the existing approach to visual mode.
With this change, initial tests indicate visual mode is functional.
* Add undo breaks before subtranscriptions
Subtranscriptions use undo as a hack to allow for partial responses to
be displayed. However, scripts don't cause an undo break mid execution
unless specifically instructed to. This meant that multiple
unguided transcriptions from a single session would cause a latter to
undo a former.
This is now fixed and undo should be reasonably usable as a command.
* Append instead of insert for new undo sequence
When entering and leavening insert mode with `i`, the cursor shifts one
column to the left. This is remedied by using append instead of insert
for setting these breaks in the undo sequence
`-` was also added to the pronunciation dictionary to be pronounced as
minus as it was causing a particularly high failure rate.
* Move undo sequence breaks to command execution
Previously, undo sequence breaks were triggered when there was a command
that caused a move to insert mode. This caused commands that changed
state (like delete or paste) to be bundled together with into the last
command that caused text to be entered.
* Fix repeat. Add space, carrot, dollar commands
Repeat (.) wasn't being tracked properly just like undo and is being
manually tracked now.
While efforts have been made to properly handle spaces, it was
particularly finicky to add a single space when one is needed. A
special 'space' command has been added to insert a single space and move
the cursor after it.
Carrot and Dollar commands have been added for start of line and end of
line respectively. These are both simple to implement, and just a
matter of defining a pronunciation.
* Return error on duplicate in commandset
Not every command in the commandset tokenizes to a single token.
Because of this, it's possible for that two commands could resolve to
the same single token after subsequent tokens are discarded.
This commit adds a simple check for duplicates when a commandset is
registered and returns an error if so.
Additional code will be required later on the vim side to actually
process this error.
* Add support for user-defined commands
This adds a user definable dictionary from spoken keys to strings or
funcrefs. All keys are added to the commandlist and when spoken, trigger
the corresponding function.
Like "save" and "run", these user commands are only available when the
command buffer is empty.
* Add readme, update cmake
* Add area commandset. Refactor spoken_dict
Area commands (inside word, around sentence...) have been given a
commandset as considered earlier.
Verbose definitions for spoken_dict entries now use dicts instead of
lists. This shortens the definition for most keys that require it and
scales better with the addition of further commandsets
* Add mark, jump. Fix change under visual.
Mark (m) and jump (') have been added.
When a visual selection was executed upon a command that initiated a
subtranscription (change) the area of the visual selection is not
properly tracked which causes the attempt to stream in partial response
to fail. This is solved by disabling partial transcriptions from being
streamed when a subtranscription is started while in visual mode.
* Accommodate ignorecase. Fix change.
From testing on older different versions of vim, the test for
distinguishing an 'R' replace all from an 'r' replace could fail if
ignorecase was set. The comparison has been changed to explicitly
require case matching
Change detection has been moved to the execution section as it was missing the
change+motion case.
* Support registers. Fix README typo
There's no logic to prevent doubled register entry, but the functional
result is equivalent to if the same key order was typed into vim.
A minor typo in the readme. I've mismemorized the mnemonic for 't' as 'to'
instead of till., but 'to' can't be used as it's a homophone with '2'.
While there was no mistake in the actual logic, it was misleading to use
'to' in the readme.
2023-08-27 18:35:06 +00:00
|
|
|
#include "common.h"
|
|
|
|
#include "common-sdl.h"
|
|
|
|
#include "whisper.h"
|
|
|
|
#include "json.hpp"
|
|
|
|
|
|
|
|
#include <iostream>
|
|
|
|
#include <cassert>
|
|
|
|
#include <cstdio>
|
|
|
|
#include <string>
|
|
|
|
#include <thread>
|
|
|
|
#include <vector>
|
|
|
|
#include <deque>
|
|
|
|
#include <set>
|
|
|
|
|
|
|
|
using json = nlohmann::json;
|
|
|
|
|
|
|
|
// command-line parameters
|
|
|
|
struct whisper_params {
|
|
|
|
int32_t n_threads = std::min(4, (int32_t) std::thread::hardware_concurrency());
|
|
|
|
int32_t prompt_ms = 5000;
|
|
|
|
int32_t command_ms = 8000;
|
|
|
|
int32_t capture_id = -1;
|
|
|
|
int32_t max_tokens = 32;
|
|
|
|
int32_t audio_ctx = 0;
|
|
|
|
|
|
|
|
float vad_thold = 0.6f;
|
|
|
|
float freq_thold = 100.0f;
|
|
|
|
|
|
|
|
bool translate = false;
|
|
|
|
bool print_special = false;
|
|
|
|
bool print_energy = false;
|
2023-11-06 09:04:24 +00:00
|
|
|
bool use_gpu = true;
|
2024-05-15 06:38:19 +00:00
|
|
|
bool flash_attn = false;
|
examples : vim plugin and LSP server (#1144)
* Initial proof of concept Vim plugin
At present, this is likely only slightly better than feature parity with
the existing whisper.nvim
Known issues:
Trailing whitespace
Up to an existing length(5 seconds) of speech may be processed when
listening is enabled
CPU cycles are spent processing speech even when not listening.
Fixing these issues is likely dependent upon future efforts to create a
dedicated library instead of wrapping examples/stream
* Support $WHISPER_CPP_HOME environment variable
A minor misunderstanding of the whisper.nvim implementation resulted in
a plugin that was functional, but not a drop in replacement as it should
be now.
* Initial progress on LSP implementation
Libcall is nonviable because the library is immediately freed after a
call is made. Further investigation has shown Language Server Protocol as
a promising alternative that both simplifies the required logic on the
vimscript side and increases the ease with which plugins for other
editors could be made in the future. This is a very large undertaking
and my progress has slowed substantially.
Work is far from being in a usable state, but I wish to keep track of
major refactors for organizational purposes.
* Rewrite audio windowing of guided transcription
One of the defining goals of this venture is allowing consecutive
commands to be rattled off without the existing deadzones of the current
implementation.
* Add unguided_transcription. Cleanup.
The unguided transcription implantation heavily borrows from existing
example implementations and the guided_transcription logic.
A high level pass was done to check that method arguments are accurate
to what inputs are actually required.
A first attempt at cancellation support was added for record keeping,
but will be deleted in a future commit.
* Fix compilation.
Resolves a large number of compilation errors.
No testing has been done yet for execution errors.
Update Makefile and .gitignore
* Functional unguided_transcription
* Functional guided_transcription
Fix commandset_list being passed by value
Properly register the first token of a multitoken command
* Minor changes before time fix
I've apparently made an awfully major mistake in thinking that unix time
was in milliseconds and will be changing all timekeeping code to use
standardized methods.
In preparation for this is a number of minor bugfixes.
Output is manually flushed.
An echo method has been added.
registerCommandset now wraps the returned index
* Swap timekeeping to use std::chrono
* Add work in progress lsp backed whisper.vim plugin
Current progress blockers are
Adding modality awareness to the command processing
(specifically, motion prompting)
Improving the VAD to be a little more responsive
(testing start of activity)
* Reworked vim plugin command loop
* Fix change inside
Multiple bug fixes that, crucially, bring the plugin to the point where a
demonstration video is possible
Add better echo messaging so whisper_log isn't required
Add loading complete message as indicator when listening has started
Insert/append are actually included in command sets
Some more heavy handed corrections to prevent a double exit when leaving
insert mode
As a somewhat hacky fix, the very first space is removed when inserting.
This cleans up most use cases, but leaves me unsatisfied with the few
cases it would be desired.
* Forcibly set commandset_index to 0 after subinsert
Also remove unnecessary ! to use builtin vim command
* Fix upper
A minor scope mistake was causing upper'd inputs to be eaten.
This was fixed and echoing was slightly improved for clarity.
* Fix formatting
Corrects indentation to 4 spaces as project standard
Slightly better error support for malformed json input
* Remove obsolete vim plugin
* Add json.hpp library
The same library that is used for the llama.cpp server
* Minor cleanups
add lsp to the make clean directive.
remove a redundant params definition.
reorder whisper.vim logging for subtranscriptions
Corrections to unlets (variables of argument scope appear immutable)
* Fix indentation. Fallback for subTranscription
Indentation has been changed to 4 spaces.
Unit testing has been set up, I'm opting not to include it in the
repository for now.
It however, has revealed a bug in the state logic where a
subtranscription can be initiated without having a saved command
When this occurs, append is added as a fallback
* Move audio polling logic to a subfunction
While work on the improved vad will continue, It's grown to be a little
out of scope. Instead, a future commit will perform multiple detection
passes at substretches of audio when a backlog of audio exists.
To facilitate this, and prevent code duplication, the vad code has been
moved into a subfunction shared by both the unguided and guided
transcription functions.
* Test for voice over subchunks if backlog > 1s
As the existing VAD implementation only checks for a falling edge at the
end of an audio chunk. It fails to detect voice in cases where the
recorded voice is only at the beginning of the audio.
To ameliorate this, when the timestamp would cause analysis of audio
over a second in length, it is split into 1 second length subchunks
which are individually tested.
Results are promising, but there seems to be a remaining bug with
unguided transcription likely related to saving context
* Limit the maximum length of audio input.
This existing VAD implementation only detects falling edges, which
means any gap in the users speaking is processed for transcription.
This simply establishes a constant maximum length depending on the type
of transcription. Uguided gets a generous 10 seconds and guided, 2.
While quick testing showed that commands are generally around a half a
second to a second, limiting commands to an even second resulted in
extreme degradation of quality. (Seemingly always the same output for a
given commandset)
* Unguided timestamp tracking, cleanup
Unguided transcriptions where not setup to allow for passing of
timestamp data forward, but have been corrected.
No_context is now always set to false. While conceptually desirable for
the quality of guided transcription, It was seemingly responsible for
prior command inputs ghosting in unguided transcription.
Save and Run are now tracked by command number instead of command text.
While command_text was provided for convenience, I wish to keep command
index authoritative. This gives greater consistency and potentially
allows for end users to rename or even translate the spoken versions of
these commands
* By default, maintain mode.
Previously, mode was reset to 0 unless otherwise set.
In addition to causing some edge cases, this was didn't mesh well with
the existing approach to visual mode.
With this change, initial tests indicate visual mode is functional.
* Add undo breaks before subtranscriptions
Subtranscriptions use undo as a hack to allow for partial responses to
be displayed. However, scripts don't cause an undo break mid execution
unless specifically instructed to. This meant that multiple
unguided transcriptions from a single session would cause a latter to
undo a former.
This is now fixed and undo should be reasonably usable as a command.
* Append instead of insert for new undo sequence
When entering and leavening insert mode with `i`, the cursor shifts one
column to the left. This is remedied by using append instead of insert
for setting these breaks in the undo sequence
`-` was also added to the pronunciation dictionary to be pronounced as
minus as it was causing a particularly high failure rate.
* Move undo sequence breaks to command execution
Previously, undo sequence breaks were triggered when there was a command
that caused a move to insert mode. This caused commands that changed
state (like delete or paste) to be bundled together with into the last
command that caused text to be entered.
* Fix repeat. Add space, carrot, dollar commands
Repeat (.) wasn't being tracked properly just like undo and is being
manually tracked now.
While efforts have been made to properly handle spaces, it was
particularly finicky to add a single space when one is needed. A
special 'space' command has been added to insert a single space and move
the cursor after it.
Carrot and Dollar commands have been added for start of line and end of
line respectively. These are both simple to implement, and just a
matter of defining a pronunciation.
* Return error on duplicate in commandset
Not every command in the commandset tokenizes to a single token.
Because of this, it's possible for that two commands could resolve to
the same single token after subsequent tokens are discarded.
This commit adds a simple check for duplicates when a commandset is
registered and returns an error if so.
Additional code will be required later on the vim side to actually
process this error.
* Add support for user-defined commands
This adds a user definable dictionary from spoken keys to strings or
funcrefs. All keys are added to the commandlist and when spoken, trigger
the corresponding function.
Like "save" and "run", these user commands are only available when the
command buffer is empty.
* Add readme, update cmake
* Add area commandset. Refactor spoken_dict
Area commands (inside word, around sentence...) have been given a
commandset as considered earlier.
Verbose definitions for spoken_dict entries now use dicts instead of
lists. This shortens the definition for most keys that require it and
scales better with the addition of further commandsets
* Add mark, jump. Fix change under visual.
Mark (m) and jump (') have been added.
When a visual selection was executed upon a command that initiated a
subtranscription (change) the area of the visual selection is not
properly tracked which causes the attempt to stream in partial response
to fail. This is solved by disabling partial transcriptions from being
streamed when a subtranscription is started while in visual mode.
* Accommodate ignorecase. Fix change.
From testing on older different versions of vim, the test for
distinguishing an 'R' replace all from an 'r' replace could fail if
ignorecase was set. The comparison has been changed to explicitly
require case matching
Change detection has been moved to the execution section as it was missing the
change+motion case.
* Support registers. Fix README typo
There's no logic to prevent doubled register entry, but the functional
result is equivalent to if the same key order was typed into vim.
A minor typo in the readme. I've mismemorized the mnemonic for 't' as 'to'
instead of till., but 'to' can't be used as it's a homophone with '2'.
While there was no mistake in the actual logic, it was misleading to use
'to' in the readme.
2023-08-27 18:35:06 +00:00
|
|
|
|
|
|
|
std::string language = "en";
|
|
|
|
std::string model = "models/ggml-base.en.bin";
|
|
|
|
};
|
|
|
|
struct command {
|
|
|
|
std::vector<whisper_token> tokens;
|
|
|
|
std::string plaintext;
|
|
|
|
};
|
|
|
|
struct commandset {
|
|
|
|
std::vector<struct command> commands;
|
|
|
|
std::vector<whisper_token> prompt_tokens;
|
|
|
|
// TODO: Store longest command?
|
|
|
|
// Multi-token commands should have probabilities of subsequent logits
|
|
|
|
// given that the prior logit is correct.
|
|
|
|
// In this case, all commands must be iterated.
|
|
|
|
// This however, is likely highly involved as different tokens
|
|
|
|
// almost certainly have different spoken lengths
|
|
|
|
// It would also have performance implications equivalent to a beam search
|
|
|
|
};
|
|
|
|
|
|
|
|
void whisper_print_usage(int argc, char ** argv, const whisper_params & params);
|
|
|
|
|
2024-06-26 16:34:09 +00:00
|
|
|
static bool whisper_params_parse(int argc, char ** argv, whisper_params & params) {
|
examples : vim plugin and LSP server (#1144)
* Initial proof of concept Vim plugin
At present, this is likely only slightly better than feature parity with
the existing whisper.nvim
Known issues:
Trailing whitespace
Up to an existing length(5 seconds) of speech may be processed when
listening is enabled
CPU cycles are spent processing speech even when not listening.
Fixing these issues is likely dependent upon future efforts to create a
dedicated library instead of wrapping examples/stream
* Support $WHISPER_CPP_HOME environment variable
A minor misunderstanding of the whisper.nvim implementation resulted in
a plugin that was functional, but not a drop in replacement as it should
be now.
* Initial progress on LSP implementation
Libcall is nonviable because the library is immediately freed after a
call is made. Further investigation has shown Language Server Protocol as
a promising alternative that both simplifies the required logic on the
vimscript side and increases the ease with which plugins for other
editors could be made in the future. This is a very large undertaking
and my progress has slowed substantially.
Work is far from being in a usable state, but I wish to keep track of
major refactors for organizational purposes.
* Rewrite audio windowing of guided transcription
One of the defining goals of this venture is allowing consecutive
commands to be rattled off without the existing deadzones of the current
implementation.
* Add unguided_transcription. Cleanup.
The unguided transcription implantation heavily borrows from existing
example implementations and the guided_transcription logic.
A high level pass was done to check that method arguments are accurate
to what inputs are actually required.
A first attempt at cancellation support was added for record keeping,
but will be deleted in a future commit.
* Fix compilation.
Resolves a large number of compilation errors.
No testing has been done yet for execution errors.
Update Makefile and .gitignore
* Functional unguided_transcription
* Functional guided_transcription
Fix commandset_list being passed by value
Properly register the first token of a multitoken command
* Minor changes before time fix
I've apparently made an awfully major mistake in thinking that unix time
was in milliseconds and will be changing all timekeeping code to use
standardized methods.
In preparation for this is a number of minor bugfixes.
Output is manually flushed.
An echo method has been added.
registerCommandset now wraps the returned index
* Swap timekeeping to use std::chrono
* Add work in progress lsp backed whisper.vim plugin
Current progress blockers are
Adding modality awareness to the command processing
(specifically, motion prompting)
Improving the VAD to be a little more responsive
(testing start of activity)
* Reworked vim plugin command loop
* Fix change inside
Multiple bug fixes that, crucially, bring the plugin to the point where a
demonstration video is possible
Add better echo messaging so whisper_log isn't required
Add loading complete message as indicator when listening has started
Insert/append are actually included in command sets
Some more heavy handed corrections to prevent a double exit when leaving
insert mode
As a somewhat hacky fix, the very first space is removed when inserting.
This cleans up most use cases, but leaves me unsatisfied with the few
cases it would be desired.
* Forcibly set commandset_index to 0 after subinsert
Also remove unnecessary ! to use builtin vim command
* Fix upper
A minor scope mistake was causing upper'd inputs to be eaten.
This was fixed and echoing was slightly improved for clarity.
* Fix formatting
Corrects indentation to 4 spaces as project standard
Slightly better error support for malformed json input
* Remove obsolete vim plugin
* Add json.hpp library
The same library that is used for the llama.cpp server
* Minor cleanups
add lsp to the make clean directive.
remove a redundant params definition.
reorder whisper.vim logging for subtranscriptions
Corrections to unlets (variables of argument scope appear immutable)
* Fix indentation. Fallback for subTranscription
Indentation has been changed to 4 spaces.
Unit testing has been set up, I'm opting not to include it in the
repository for now.
It however, has revealed a bug in the state logic where a
subtranscription can be initiated without having a saved command
When this occurs, append is added as a fallback
* Move audio polling logic to a subfunction
While work on the improved vad will continue, It's grown to be a little
out of scope. Instead, a future commit will perform multiple detection
passes at substretches of audio when a backlog of audio exists.
To facilitate this, and prevent code duplication, the vad code has been
moved into a subfunction shared by both the unguided and guided
transcription functions.
* Test for voice over subchunks if backlog > 1s
As the existing VAD implementation only checks for a falling edge at the
end of an audio chunk. It fails to detect voice in cases where the
recorded voice is only at the beginning of the audio.
To ameliorate this, when the timestamp would cause analysis of audio
over a second in length, it is split into 1 second length subchunks
which are individually tested.
Results are promising, but there seems to be a remaining bug with
unguided transcription likely related to saving context
* Limit the maximum length of audio input.
This existing VAD implementation only detects falling edges, which
means any gap in the users speaking is processed for transcription.
This simply establishes a constant maximum length depending on the type
of transcription. Uguided gets a generous 10 seconds and guided, 2.
While quick testing showed that commands are generally around a half a
second to a second, limiting commands to an even second resulted in
extreme degradation of quality. (Seemingly always the same output for a
given commandset)
* Unguided timestamp tracking, cleanup
Unguided transcriptions where not setup to allow for passing of
timestamp data forward, but have been corrected.
No_context is now always set to false. While conceptually desirable for
the quality of guided transcription, It was seemingly responsible for
prior command inputs ghosting in unguided transcription.
Save and Run are now tracked by command number instead of command text.
While command_text was provided for convenience, I wish to keep command
index authoritative. This gives greater consistency and potentially
allows for end users to rename or even translate the spoken versions of
these commands
* By default, maintain mode.
Previously, mode was reset to 0 unless otherwise set.
In addition to causing some edge cases, this was didn't mesh well with
the existing approach to visual mode.
With this change, initial tests indicate visual mode is functional.
* Add undo breaks before subtranscriptions
Subtranscriptions use undo as a hack to allow for partial responses to
be displayed. However, scripts don't cause an undo break mid execution
unless specifically instructed to. This meant that multiple
unguided transcriptions from a single session would cause a latter to
undo a former.
This is now fixed and undo should be reasonably usable as a command.
* Append instead of insert for new undo sequence
When entering and leavening insert mode with `i`, the cursor shifts one
column to the left. This is remedied by using append instead of insert
for setting these breaks in the undo sequence
`-` was also added to the pronunciation dictionary to be pronounced as
minus as it was causing a particularly high failure rate.
* Move undo sequence breaks to command execution
Previously, undo sequence breaks were triggered when there was a command
that caused a move to insert mode. This caused commands that changed
state (like delete or paste) to be bundled together with into the last
command that caused text to be entered.
* Fix repeat. Add space, carrot, dollar commands
Repeat (.) wasn't being tracked properly just like undo and is being
manually tracked now.
While efforts have been made to properly handle spaces, it was
particularly finicky to add a single space when one is needed. A
special 'space' command has been added to insert a single space and move
the cursor after it.
Carrot and Dollar commands have been added for start of line and end of
line respectively. These are both simple to implement, and just a
matter of defining a pronunciation.
* Return error on duplicate in commandset
Not every command in the commandset tokenizes to a single token.
Because of this, it's possible for that two commands could resolve to
the same single token after subsequent tokens are discarded.
This commit adds a simple check for duplicates when a commandset is
registered and returns an error if so.
Additional code will be required later on the vim side to actually
process this error.
* Add support for user-defined commands
This adds a user definable dictionary from spoken keys to strings or
funcrefs. All keys are added to the commandlist and when spoken, trigger
the corresponding function.
Like "save" and "run", these user commands are only available when the
command buffer is empty.
* Add readme, update cmake
* Add area commandset. Refactor spoken_dict
Area commands (inside word, around sentence...) have been given a
commandset as considered earlier.
Verbose definitions for spoken_dict entries now use dicts instead of
lists. This shortens the definition for most keys that require it and
scales better with the addition of further commandsets
* Add mark, jump. Fix change under visual.
Mark (m) and jump (') have been added.
When a visual selection was executed upon a command that initiated a
subtranscription (change) the area of the visual selection is not
properly tracked which causes the attempt to stream in partial response
to fail. This is solved by disabling partial transcriptions from being
streamed when a subtranscription is started while in visual mode.
* Accommodate ignorecase. Fix change.
From testing on older different versions of vim, the test for
distinguishing an 'R' replace all from an 'r' replace could fail if
ignorecase was set. The comparison has been changed to explicitly
require case matching
Change detection has been moved to the execution section as it was missing the
change+motion case.
* Support registers. Fix README typo
There's no logic to prevent doubled register entry, but the functional
result is equivalent to if the same key order was typed into vim.
A minor typo in the readme. I've mismemorized the mnemonic for 't' as 'to'
instead of till., but 'to' can't be used as it's a homophone with '2'.
While there was no mistake in the actual logic, it was misleading to use
'to' in the readme.
2023-08-27 18:35:06 +00:00
|
|
|
for (int i = 1; i < argc; i++) {
|
|
|
|
std::string arg = argv[i];
|
|
|
|
|
|
|
|
if (arg == "-h" || arg == "--help") {
|
|
|
|
whisper_print_usage(argc, argv, params);
|
|
|
|
exit(0);
|
|
|
|
}
|
|
|
|
else if (arg == "-t" || arg == "--threads") { params.n_threads = std::stoi(argv[++i]); }
|
|
|
|
else if (arg == "-pms" || arg == "--prompt-ms") { params.prompt_ms = std::stoi(argv[++i]); }
|
|
|
|
else if (arg == "-cms" || arg == "--command-ms") { params.command_ms = std::stoi(argv[++i]); }
|
|
|
|
else if (arg == "-c" || arg == "--capture") { params.capture_id = std::stoi(argv[++i]); }
|
|
|
|
else if (arg == "-mt" || arg == "--max-tokens") { params.max_tokens = std::stoi(argv[++i]); }
|
|
|
|
else if (arg == "-ac" || arg == "--audio-ctx") { params.audio_ctx = std::stoi(argv[++i]); }
|
|
|
|
else if (arg == "-vth" || arg == "--vad-thold") { params.vad_thold = std::stof(argv[++i]); }
|
|
|
|
else if (arg == "-fth" || arg == "--freq-thold") { params.freq_thold = std::stof(argv[++i]); }
|
|
|
|
else if (arg == "-tr" || arg == "--translate") { params.translate = true; }
|
|
|
|
else if (arg == "-ps" || arg == "--print-special") { params.print_special = true; }
|
|
|
|
else if (arg == "-pe" || arg == "--print-energy") { params.print_energy = true; }
|
2023-11-06 09:04:24 +00:00
|
|
|
else if (arg == "-ng" || arg == "--no-gpu") { params.use_gpu = false; }
|
2024-05-15 06:38:19 +00:00
|
|
|
else if (arg == "-fa" || arg == "--flash-attn") { params.flash_attn = true; }
|
examples : vim plugin and LSP server (#1144)
* Initial proof of concept Vim plugin
At present, this is likely only slightly better than feature parity with
the existing whisper.nvim
Known issues:
Trailing whitespace
Up to an existing length(5 seconds) of speech may be processed when
listening is enabled
CPU cycles are spent processing speech even when not listening.
Fixing these issues is likely dependent upon future efforts to create a
dedicated library instead of wrapping examples/stream
* Support $WHISPER_CPP_HOME environment variable
A minor misunderstanding of the whisper.nvim implementation resulted in
a plugin that was functional, but not a drop in replacement as it should
be now.
* Initial progress on LSP implementation
Libcall is nonviable because the library is immediately freed after a
call is made. Further investigation has shown Language Server Protocol as
a promising alternative that both simplifies the required logic on the
vimscript side and increases the ease with which plugins for other
editors could be made in the future. This is a very large undertaking
and my progress has slowed substantially.
Work is far from being in a usable state, but I wish to keep track of
major refactors for organizational purposes.
* Rewrite audio windowing of guided transcription
One of the defining goals of this venture is allowing consecutive
commands to be rattled off without the existing deadzones of the current
implementation.
* Add unguided_transcription. Cleanup.
The unguided transcription implantation heavily borrows from existing
example implementations and the guided_transcription logic.
A high level pass was done to check that method arguments are accurate
to what inputs are actually required.
A first attempt at cancellation support was added for record keeping,
but will be deleted in a future commit.
* Fix compilation.
Resolves a large number of compilation errors.
No testing has been done yet for execution errors.
Update Makefile and .gitignore
* Functional unguided_transcription
* Functional guided_transcription
Fix commandset_list being passed by value
Properly register the first token of a multitoken command
* Minor changes before time fix
I've apparently made an awfully major mistake in thinking that unix time
was in milliseconds and will be changing all timekeeping code to use
standardized methods.
In preparation for this is a number of minor bugfixes.
Output is manually flushed.
An echo method has been added.
registerCommandset now wraps the returned index
* Swap timekeeping to use std::chrono
* Add work in progress lsp backed whisper.vim plugin
Current progress blockers are
Adding modality awareness to the command processing
(specifically, motion prompting)
Improving the VAD to be a little more responsive
(testing start of activity)
* Reworked vim plugin command loop
* Fix change inside
Multiple bug fixes that, crucially, bring the plugin to the point where a
demonstration video is possible
Add better echo messaging so whisper_log isn't required
Add loading complete message as indicator when listening has started
Insert/append are actually included in command sets
Some more heavy handed corrections to prevent a double exit when leaving
insert mode
As a somewhat hacky fix, the very first space is removed when inserting.
This cleans up most use cases, but leaves me unsatisfied with the few
cases it would be desired.
* Forcibly set commandset_index to 0 after subinsert
Also remove unnecessary ! to use builtin vim command
* Fix upper
A minor scope mistake was causing upper'd inputs to be eaten.
This was fixed and echoing was slightly improved for clarity.
* Fix formatting
Corrects indentation to 4 spaces as project standard
Slightly better error support for malformed json input
* Remove obsolete vim plugin
* Add json.hpp library
The same library that is used for the llama.cpp server
* Minor cleanups
add lsp to the make clean directive.
remove a redundant params definition.
reorder whisper.vim logging for subtranscriptions
Corrections to unlets (variables of argument scope appear immutable)
* Fix indentation. Fallback for subTranscription
Indentation has been changed to 4 spaces.
Unit testing has been set up, I'm opting not to include it in the
repository for now.
It however, has revealed a bug in the state logic where a
subtranscription can be initiated without having a saved command
When this occurs, append is added as a fallback
* Move audio polling logic to a subfunction
While work on the improved vad will continue, It's grown to be a little
out of scope. Instead, a future commit will perform multiple detection
passes at substretches of audio when a backlog of audio exists.
To facilitate this, and prevent code duplication, the vad code has been
moved into a subfunction shared by both the unguided and guided
transcription functions.
* Test for voice over subchunks if backlog > 1s
As the existing VAD implementation only checks for a falling edge at the
end of an audio chunk. It fails to detect voice in cases where the
recorded voice is only at the beginning of the audio.
To ameliorate this, when the timestamp would cause analysis of audio
over a second in length, it is split into 1 second length subchunks
which are individually tested.
Results are promising, but there seems to be a remaining bug with
unguided transcription likely related to saving context
* Limit the maximum length of audio input.
This existing VAD implementation only detects falling edges, which
means any gap in the users speaking is processed for transcription.
This simply establishes a constant maximum length depending on the type
of transcription. Uguided gets a generous 10 seconds and guided, 2.
While quick testing showed that commands are generally around a half a
second to a second, limiting commands to an even second resulted in
extreme degradation of quality. (Seemingly always the same output for a
given commandset)
* Unguided timestamp tracking, cleanup
Unguided transcriptions where not setup to allow for passing of
timestamp data forward, but have been corrected.
No_context is now always set to false. While conceptually desirable for
the quality of guided transcription, It was seemingly responsible for
prior command inputs ghosting in unguided transcription.
Save and Run are now tracked by command number instead of command text.
While command_text was provided for convenience, I wish to keep command
index authoritative. This gives greater consistency and potentially
allows for end users to rename or even translate the spoken versions of
these commands
* By default, maintain mode.
Previously, mode was reset to 0 unless otherwise set.
In addition to causing some edge cases, this was didn't mesh well with
the existing approach to visual mode.
With this change, initial tests indicate visual mode is functional.
* Add undo breaks before subtranscriptions
Subtranscriptions use undo as a hack to allow for partial responses to
be displayed. However, scripts don't cause an undo break mid execution
unless specifically instructed to. This meant that multiple
unguided transcriptions from a single session would cause a latter to
undo a former.
This is now fixed and undo should be reasonably usable as a command.
* Append instead of insert for new undo sequence
When entering and leavening insert mode with `i`, the cursor shifts one
column to the left. This is remedied by using append instead of insert
for setting these breaks in the undo sequence
`-` was also added to the pronunciation dictionary to be pronounced as
minus as it was causing a particularly high failure rate.
* Move undo sequence breaks to command execution
Previously, undo sequence breaks were triggered when there was a command
that caused a move to insert mode. This caused commands that changed
state (like delete or paste) to be bundled together with into the last
command that caused text to be entered.
* Fix repeat. Add space, carrot, dollar commands
Repeat (.) wasn't being tracked properly just like undo and is being
manually tracked now.
While efforts have been made to properly handle spaces, it was
particularly finicky to add a single space when one is needed. A
special 'space' command has been added to insert a single space and move
the cursor after it.
Carrot and Dollar commands have been added for start of line and end of
line respectively. These are both simple to implement, and just a
matter of defining a pronunciation.
* Return error on duplicate in commandset
Not every command in the commandset tokenizes to a single token.
Because of this, it's possible for that two commands could resolve to
the same single token after subsequent tokens are discarded.
This commit adds a simple check for duplicates when a commandset is
registered and returns an error if so.
Additional code will be required later on the vim side to actually
process this error.
* Add support for user-defined commands
This adds a user definable dictionary from spoken keys to strings or
funcrefs. All keys are added to the commandlist and when spoken, trigger
the corresponding function.
Like "save" and "run", these user commands are only available when the
command buffer is empty.
* Add readme, update cmake
* Add area commandset. Refactor spoken_dict
Area commands (inside word, around sentence...) have been given a
commandset as considered earlier.
Verbose definitions for spoken_dict entries now use dicts instead of
lists. This shortens the definition for most keys that require it and
scales better with the addition of further commandsets
* Add mark, jump. Fix change under visual.
Mark (m) and jump (') have been added.
When a visual selection was executed upon a command that initiated a
subtranscription (change) the area of the visual selection is not
properly tracked which causes the attempt to stream in partial response
to fail. This is solved by disabling partial transcriptions from being
streamed when a subtranscription is started while in visual mode.
* Accommodate ignorecase. Fix change.
From testing on older different versions of vim, the test for
distinguishing an 'R' replace all from an 'r' replace could fail if
ignorecase was set. The comparison has been changed to explicitly
require case matching
Change detection has been moved to the execution section as it was missing the
change+motion case.
* Support registers. Fix README typo
There's no logic to prevent doubled register entry, but the functional
result is equivalent to if the same key order was typed into vim.
A minor typo in the readme. I've mismemorized the mnemonic for 't' as 'to'
instead of till., but 'to' can't be used as it's a homophone with '2'.
While there was no mistake in the actual logic, it was misleading to use
'to' in the readme.
2023-08-27 18:35:06 +00:00
|
|
|
else if (arg == "-l" || arg == "--language") { params.language = argv[++i]; }
|
|
|
|
else if (arg == "-m" || arg == "--model") { params.model = argv[++i]; }
|
|
|
|
else {
|
|
|
|
fprintf(stderr, "error: unknown argument: %s\n", arg.c_str());
|
|
|
|
whisper_print_usage(argc, argv, params);
|
|
|
|
exit(0);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
void whisper_print_usage(int /*argc*/, char ** argv, const whisper_params & params) {
|
|
|
|
fprintf(stderr, "\n");
|
|
|
|
fprintf(stderr, "usage: %s [options]\n", argv[0]);
|
|
|
|
fprintf(stderr, "\n");
|
|
|
|
fprintf(stderr, "options:\n");
|
|
|
|
fprintf(stderr, " -h, --help [default] show this help message and exit\n");
|
|
|
|
fprintf(stderr, " -t N, --threads N [%-7d] number of threads to use during computation\n", params.n_threads);
|
|
|
|
fprintf(stderr, " -pms N, --prompt-ms N [%-7d] prompt duration in milliseconds\n", params.prompt_ms);
|
|
|
|
fprintf(stderr, " -cms N, --command-ms N [%-7d] command duration in milliseconds\n", params.command_ms);
|
|
|
|
fprintf(stderr, " -c ID, --capture ID [%-7d] capture device ID\n", params.capture_id);
|
|
|
|
fprintf(stderr, " -mt N, --max-tokens N [%-7d] maximum number of tokens per audio chunk\n", params.max_tokens);
|
|
|
|
fprintf(stderr, " -ac N, --audio-ctx N [%-7d] audio context size (0 - all)\n", params.audio_ctx);
|
|
|
|
fprintf(stderr, " -vth N, --vad-thold N [%-7.2f] voice activity detection threshold\n", params.vad_thold);
|
|
|
|
fprintf(stderr, " -fth N, --freq-thold N [%-7.2f] high-pass frequency cutoff\n", params.freq_thold);
|
|
|
|
fprintf(stderr, " -tr, --translate [%-7s] translate from source language to english\n", params.translate ? "true" : "false");
|
|
|
|
fprintf(stderr, " -ps, --print-special [%-7s] print special tokens\n", params.print_special ? "true" : "false");
|
|
|
|
fprintf(stderr, " -pe, --print-energy [%-7s] print sound energy (for debugging)\n", params.print_energy ? "true" : "false");
|
2023-11-06 09:04:24 +00:00
|
|
|
fprintf(stderr, " -ng, --no-gpu [%-7s] disable GPU\n", params.use_gpu ? "false" : "true");
|
2024-05-15 06:38:19 +00:00
|
|
|
fprintf(stderr, " -fa, --flash-attn [%-7s] flash attention\n", params.flash_attn ? "true" : "false");
|
examples : vim plugin and LSP server (#1144)
* Initial proof of concept Vim plugin
At present, this is likely only slightly better than feature parity with
the existing whisper.nvim
Known issues:
Trailing whitespace
Up to an existing length(5 seconds) of speech may be processed when
listening is enabled
CPU cycles are spent processing speech even when not listening.
Fixing these issues is likely dependent upon future efforts to create a
dedicated library instead of wrapping examples/stream
* Support $WHISPER_CPP_HOME environment variable
A minor misunderstanding of the whisper.nvim implementation resulted in
a plugin that was functional, but not a drop in replacement as it should
be now.
* Initial progress on LSP implementation
Libcall is nonviable because the library is immediately freed after a
call is made. Further investigation has shown Language Server Protocol as
a promising alternative that both simplifies the required logic on the
vimscript side and increases the ease with which plugins for other
editors could be made in the future. This is a very large undertaking
and my progress has slowed substantially.
Work is far from being in a usable state, but I wish to keep track of
major refactors for organizational purposes.
* Rewrite audio windowing of guided transcription
One of the defining goals of this venture is allowing consecutive
commands to be rattled off without the existing deadzones of the current
implementation.
* Add unguided_transcription. Cleanup.
The unguided transcription implantation heavily borrows from existing
example implementations and the guided_transcription logic.
A high level pass was done to check that method arguments are accurate
to what inputs are actually required.
A first attempt at cancellation support was added for record keeping,
but will be deleted in a future commit.
* Fix compilation.
Resolves a large number of compilation errors.
No testing has been done yet for execution errors.
Update Makefile and .gitignore
* Functional unguided_transcription
* Functional guided_transcription
Fix commandset_list being passed by value
Properly register the first token of a multitoken command
* Minor changes before time fix
I've apparently made an awfully major mistake in thinking that unix time
was in milliseconds and will be changing all timekeeping code to use
standardized methods.
In preparation for this is a number of minor bugfixes.
Output is manually flushed.
An echo method has been added.
registerCommandset now wraps the returned index
* Swap timekeeping to use std::chrono
* Add work in progress lsp backed whisper.vim plugin
Current progress blockers are
Adding modality awareness to the command processing
(specifically, motion prompting)
Improving the VAD to be a little more responsive
(testing start of activity)
* Reworked vim plugin command loop
* Fix change inside
Multiple bug fixes that, crucially, bring the plugin to the point where a
demonstration video is possible
Add better echo messaging so whisper_log isn't required
Add loading complete message as indicator when listening has started
Insert/append are actually included in command sets
Some more heavy handed corrections to prevent a double exit when leaving
insert mode
As a somewhat hacky fix, the very first space is removed when inserting.
This cleans up most use cases, but leaves me unsatisfied with the few
cases it would be desired.
* Forcibly set commandset_index to 0 after subinsert
Also remove unnecessary ! to use builtin vim command
* Fix upper
A minor scope mistake was causing upper'd inputs to be eaten.
This was fixed and echoing was slightly improved for clarity.
* Fix formatting
Corrects indentation to 4 spaces as project standard
Slightly better error support for malformed json input
* Remove obsolete vim plugin
* Add json.hpp library
The same library that is used for the llama.cpp server
* Minor cleanups
add lsp to the make clean directive.
remove a redundant params definition.
reorder whisper.vim logging for subtranscriptions
Corrections to unlets (variables of argument scope appear immutable)
* Fix indentation. Fallback for subTranscription
Indentation has been changed to 4 spaces.
Unit testing has been set up, I'm opting not to include it in the
repository for now.
It however, has revealed a bug in the state logic where a
subtranscription can be initiated without having a saved command
When this occurs, append is added as a fallback
* Move audio polling logic to a subfunction
While work on the improved vad will continue, It's grown to be a little
out of scope. Instead, a future commit will perform multiple detection
passes at substretches of audio when a backlog of audio exists.
To facilitate this, and prevent code duplication, the vad code has been
moved into a subfunction shared by both the unguided and guided
transcription functions.
* Test for voice over subchunks if backlog > 1s
As the existing VAD implementation only checks for a falling edge at the
end of an audio chunk. It fails to detect voice in cases where the
recorded voice is only at the beginning of the audio.
To ameliorate this, when the timestamp would cause analysis of audio
over a second in length, it is split into 1 second length subchunks
which are individually tested.
Results are promising, but there seems to be a remaining bug with
unguided transcription likely related to saving context
* Limit the maximum length of audio input.
This existing VAD implementation only detects falling edges, which
means any gap in the users speaking is processed for transcription.
This simply establishes a constant maximum length depending on the type
of transcription. Uguided gets a generous 10 seconds and guided, 2.
While quick testing showed that commands are generally around a half a
second to a second, limiting commands to an even second resulted in
extreme degradation of quality. (Seemingly always the same output for a
given commandset)
* Unguided timestamp tracking, cleanup
Unguided transcriptions where not setup to allow for passing of
timestamp data forward, but have been corrected.
No_context is now always set to false. While conceptually desirable for
the quality of guided transcription, It was seemingly responsible for
prior command inputs ghosting in unguided transcription.
Save and Run are now tracked by command number instead of command text.
While command_text was provided for convenience, I wish to keep command
index authoritative. This gives greater consistency and potentially
allows for end users to rename or even translate the spoken versions of
these commands
* By default, maintain mode.
Previously, mode was reset to 0 unless otherwise set.
In addition to causing some edge cases, this was didn't mesh well with
the existing approach to visual mode.
With this change, initial tests indicate visual mode is functional.
* Add undo breaks before subtranscriptions
Subtranscriptions use undo as a hack to allow for partial responses to
be displayed. However, scripts don't cause an undo break mid execution
unless specifically instructed to. This meant that multiple
unguided transcriptions from a single session would cause a latter to
undo a former.
This is now fixed and undo should be reasonably usable as a command.
* Append instead of insert for new undo sequence
When entering and leavening insert mode with `i`, the cursor shifts one
column to the left. This is remedied by using append instead of insert
for setting these breaks in the undo sequence
`-` was also added to the pronunciation dictionary to be pronounced as
minus as it was causing a particularly high failure rate.
* Move undo sequence breaks to command execution
Previously, undo sequence breaks were triggered when there was a command
that caused a move to insert mode. This caused commands that changed
state (like delete or paste) to be bundled together with into the last
command that caused text to be entered.
* Fix repeat. Add space, carrot, dollar commands
Repeat (.) wasn't being tracked properly just like undo and is being
manually tracked now.
While efforts have been made to properly handle spaces, it was
particularly finicky to add a single space when one is needed. A
special 'space' command has been added to insert a single space and move
the cursor after it.
Carrot and Dollar commands have been added for start of line and end of
line respectively. These are both simple to implement, and just a
matter of defining a pronunciation.
* Return error on duplicate in commandset
Not every command in the commandset tokenizes to a single token.
Because of this, it's possible for that two commands could resolve to
the same single token after subsequent tokens are discarded.
This commit adds a simple check for duplicates when a commandset is
registered and returns an error if so.
Additional code will be required later on the vim side to actually
process this error.
* Add support for user-defined commands
This adds a user definable dictionary from spoken keys to strings or
funcrefs. All keys are added to the commandlist and when spoken, trigger
the corresponding function.
Like "save" and "run", these user commands are only available when the
command buffer is empty.
* Add readme, update cmake
* Add area commandset. Refactor spoken_dict
Area commands (inside word, around sentence...) have been given a
commandset as considered earlier.
Verbose definitions for spoken_dict entries now use dicts instead of
lists. This shortens the definition for most keys that require it and
scales better with the addition of further commandsets
* Add mark, jump. Fix change under visual.
Mark (m) and jump (') have been added.
When a visual selection was executed upon a command that initiated a
subtranscription (change) the area of the visual selection is not
properly tracked which causes the attempt to stream in partial response
to fail. This is solved by disabling partial transcriptions from being
streamed when a subtranscription is started while in visual mode.
* Accommodate ignorecase. Fix change.
From testing on older different versions of vim, the test for
distinguishing an 'R' replace all from an 'r' replace could fail if
ignorecase was set. The comparison has been changed to explicitly
require case matching
Change detection has been moved to the execution section as it was missing the
change+motion case.
* Support registers. Fix README typo
There's no logic to prevent doubled register entry, but the functional
result is equivalent to if the same key order was typed into vim.
A minor typo in the readme. I've mismemorized the mnemonic for 't' as 'to'
instead of till., but 'to' can't be used as it's a homophone with '2'.
While there was no mistake in the actual logic, it was misleading to use
'to' in the readme.
2023-08-27 18:35:06 +00:00
|
|
|
fprintf(stderr, " -l LANG, --language LANG [%-7s] spoken language\n", params.language.c_str());
|
|
|
|
fprintf(stderr, " -m FNAME, --model FNAME [%-7s] model path\n", params.model.c_str());
|
|
|
|
fprintf(stderr, "\n");
|
|
|
|
}
|
2024-06-26 16:34:09 +00:00
|
|
|
static uint64_t wait_for_vad(audio_async & audio, json jparams, const whisper_params & params, uint64_t maxlength_ms, std::vector<float> & pcmf32) {
|
examples : vim plugin and LSP server (#1144)
* Initial proof of concept Vim plugin
At present, this is likely only slightly better than feature parity with
the existing whisper.nvim
Known issues:
Trailing whitespace
Up to an existing length(5 seconds) of speech may be processed when
listening is enabled
CPU cycles are spent processing speech even when not listening.
Fixing these issues is likely dependent upon future efforts to create a
dedicated library instead of wrapping examples/stream
* Support $WHISPER_CPP_HOME environment variable
A minor misunderstanding of the whisper.nvim implementation resulted in
a plugin that was functional, but not a drop in replacement as it should
be now.
* Initial progress on LSP implementation
Libcall is nonviable because the library is immediately freed after a
call is made. Further investigation has shown Language Server Protocol as
a promising alternative that both simplifies the required logic on the
vimscript side and increases the ease with which plugins for other
editors could be made in the future. This is a very large undertaking
and my progress has slowed substantially.
Work is far from being in a usable state, but I wish to keep track of
major refactors for organizational purposes.
* Rewrite audio windowing of guided transcription
One of the defining goals of this venture is allowing consecutive
commands to be rattled off without the existing deadzones of the current
implementation.
* Add unguided_transcription. Cleanup.
The unguided transcription implantation heavily borrows from existing
example implementations and the guided_transcription logic.
A high level pass was done to check that method arguments are accurate
to what inputs are actually required.
A first attempt at cancellation support was added for record keeping,
but will be deleted in a future commit.
* Fix compilation.
Resolves a large number of compilation errors.
No testing has been done yet for execution errors.
Update Makefile and .gitignore
* Functional unguided_transcription
* Functional guided_transcription
Fix commandset_list being passed by value
Properly register the first token of a multitoken command
* Minor changes before time fix
I've apparently made an awfully major mistake in thinking that unix time
was in milliseconds and will be changing all timekeeping code to use
standardized methods.
In preparation for this is a number of minor bugfixes.
Output is manually flushed.
An echo method has been added.
registerCommandset now wraps the returned index
* Swap timekeeping to use std::chrono
* Add work in progress lsp backed whisper.vim plugin
Current progress blockers are
Adding modality awareness to the command processing
(specifically, motion prompting)
Improving the VAD to be a little more responsive
(testing start of activity)
* Reworked vim plugin command loop
* Fix change inside
Multiple bug fixes that, crucially, bring the plugin to the point where a
demonstration video is possible
Add better echo messaging so whisper_log isn't required
Add loading complete message as indicator when listening has started
Insert/append are actually included in command sets
Some more heavy handed corrections to prevent a double exit when leaving
insert mode
As a somewhat hacky fix, the very first space is removed when inserting.
This cleans up most use cases, but leaves me unsatisfied with the few
cases it would be desired.
* Forcibly set commandset_index to 0 after subinsert
Also remove unnecessary ! to use builtin vim command
* Fix upper
A minor scope mistake was causing upper'd inputs to be eaten.
This was fixed and echoing was slightly improved for clarity.
* Fix formatting
Corrects indentation to 4 spaces as project standard
Slightly better error support for malformed json input
* Remove obsolete vim plugin
* Add json.hpp library
The same library that is used for the llama.cpp server
* Minor cleanups
add lsp to the make clean directive.
remove a redundant params definition.
reorder whisper.vim logging for subtranscriptions
Corrections to unlets (variables of argument scope appear immutable)
* Fix indentation. Fallback for subTranscription
Indentation has been changed to 4 spaces.
Unit testing has been set up, I'm opting not to include it in the
repository for now.
It however, has revealed a bug in the state logic where a
subtranscription can be initiated without having a saved command
When this occurs, append is added as a fallback
* Move audio polling logic to a subfunction
While work on the improved vad will continue, It's grown to be a little
out of scope. Instead, a future commit will perform multiple detection
passes at substretches of audio when a backlog of audio exists.
To facilitate this, and prevent code duplication, the vad code has been
moved into a subfunction shared by both the unguided and guided
transcription functions.
* Test for voice over subchunks if backlog > 1s
As the existing VAD implementation only checks for a falling edge at the
end of an audio chunk. It fails to detect voice in cases where the
recorded voice is only at the beginning of the audio.
To ameliorate this, when the timestamp would cause analysis of audio
over a second in length, it is split into 1 second length subchunks
which are individually tested.
Results are promising, but there seems to be a remaining bug with
unguided transcription likely related to saving context
* Limit the maximum length of audio input.
This existing VAD implementation only detects falling edges, which
means any gap in the users speaking is processed for transcription.
This simply establishes a constant maximum length depending on the type
of transcription. Uguided gets a generous 10 seconds and guided, 2.
While quick testing showed that commands are generally around a half a
second to a second, limiting commands to an even second resulted in
extreme degradation of quality. (Seemingly always the same output for a
given commandset)
* Unguided timestamp tracking, cleanup
Unguided transcriptions where not setup to allow for passing of
timestamp data forward, but have been corrected.
No_context is now always set to false. While conceptually desirable for
the quality of guided transcription, It was seemingly responsible for
prior command inputs ghosting in unguided transcription.
Save and Run are now tracked by command number instead of command text.
While command_text was provided for convenience, I wish to keep command
index authoritative. This gives greater consistency and potentially
allows for end users to rename or even translate the spoken versions of
these commands
* By default, maintain mode.
Previously, mode was reset to 0 unless otherwise set.
In addition to causing some edge cases, this was didn't mesh well with
the existing approach to visual mode.
With this change, initial tests indicate visual mode is functional.
* Add undo breaks before subtranscriptions
Subtranscriptions use undo as a hack to allow for partial responses to
be displayed. However, scripts don't cause an undo break mid execution
unless specifically instructed to. This meant that multiple
unguided transcriptions from a single session would cause a latter to
undo a former.
This is now fixed and undo should be reasonably usable as a command.
* Append instead of insert for new undo sequence
When entering and leavening insert mode with `i`, the cursor shifts one
column to the left. This is remedied by using append instead of insert
for setting these breaks in the undo sequence
`-` was also added to the pronunciation dictionary to be pronounced as
minus as it was causing a particularly high failure rate.
* Move undo sequence breaks to command execution
Previously, undo sequence breaks were triggered when there was a command
that caused a move to insert mode. This caused commands that changed
state (like delete or paste) to be bundled together with into the last
command that caused text to be entered.
* Fix repeat. Add space, carrot, dollar commands
Repeat (.) wasn't being tracked properly just like undo and is being
manually tracked now.
While efforts have been made to properly handle spaces, it was
particularly finicky to add a single space when one is needed. A
special 'space' command has been added to insert a single space and move
the cursor after it.
Carrot and Dollar commands have been added for start of line and end of
line respectively. These are both simple to implement, and just a
matter of defining a pronunciation.
* Return error on duplicate in commandset
Not every command in the commandset tokenizes to a single token.
Because of this, it's possible for that two commands could resolve to
the same single token after subsequent tokens are discarded.
This commit adds a simple check for duplicates when a commandset is
registered and returns an error if so.
Additional code will be required later on the vim side to actually
process this error.
* Add support for user-defined commands
This adds a user definable dictionary from spoken keys to strings or
funcrefs. All keys are added to the commandlist and when spoken, trigger
the corresponding function.
Like "save" and "run", these user commands are only available when the
command buffer is empty.
* Add readme, update cmake
* Add area commandset. Refactor spoken_dict
Area commands (inside word, around sentence...) have been given a
commandset as considered earlier.
Verbose definitions for spoken_dict entries now use dicts instead of
lists. This shortens the definition for most keys that require it and
scales better with the addition of further commandsets
* Add mark, jump. Fix change under visual.
Mark (m) and jump (') have been added.
When a visual selection was executed upon a command that initiated a
subtranscription (change) the area of the visual selection is not
properly tracked which causes the attempt to stream in partial response
to fail. This is solved by disabling partial transcriptions from being
streamed when a subtranscription is started while in visual mode.
* Accommodate ignorecase. Fix change.
From testing on older different versions of vim, the test for
distinguishing an 'R' replace all from an 'r' replace could fail if
ignorecase was set. The comparison has been changed to explicitly
require case matching
Change detection has been moved to the execution section as it was missing the
change+motion case.
* Support registers. Fix README typo
There's no logic to prevent doubled register entry, but the functional
result is equivalent to if the same key order was typed into vim.
A minor typo in the readme. I've mismemorized the mnemonic for 't' as 'to'
instead of till., but 'to' can't be used as it's a homophone with '2'.
While there was no mistake in the actual logic, it was misleading to use
'to' in the readme.
2023-08-27 18:35:06 +00:00
|
|
|
using namespace std::chrono;
|
|
|
|
uint64_t time_now = time_point_cast<milliseconds>(system_clock::now()).time_since_epoch().count();
|
|
|
|
uint64_t start_time = time_now;
|
|
|
|
if (jparams.contains("timestamp")) {
|
|
|
|
start_time = jparams.at("timestamp");
|
|
|
|
}
|
|
|
|
if(time_now - start_time < 500) {
|
|
|
|
//wait for a backlog of audio
|
|
|
|
std::this_thread::sleep_for(milliseconds(500 - (time_now - start_time)));
|
|
|
|
time_now = time_point_cast<milliseconds>(system_clock::now()).time_since_epoch().count();
|
|
|
|
} else if (time_now - start_time > 1000) {
|
|
|
|
audio.get(time_now-start_time, pcmf32);
|
|
|
|
size_t max_offset = pcmf32.size() - WHISPER_SAMPLE_RATE;
|
|
|
|
for(size_t offset=0;offset < max_offset;offset+=WHISPER_SAMPLE_RATE/10) {
|
|
|
|
std::vector<float> audio_chunk(&pcmf32[offset], &pcmf32[offset+WHISPER_SAMPLE_RATE]);
|
|
|
|
if(::vad_simple(audio_chunk, WHISPER_SAMPLE_RATE, 1000, params.vad_thold, params.freq_thold, params.print_energy)) {
|
|
|
|
pcmf32.resize(offset+WHISPER_SAMPLE_RATE);
|
|
|
|
if (offset*1000/WHISPER_SAMPLE_RATE+1000 > maxlength_ms) {
|
|
|
|
//remove samples from the beginning
|
|
|
|
pcmf32.erase(pcmf32.begin(),pcmf32.end()-(maxlength_ms*WHISPER_SAMPLE_RATE/1000));
|
|
|
|
fprintf(stderr, "Shortened samples");
|
|
|
|
}
|
|
|
|
return start_time + offset*1000/WHISPER_SAMPLE_RATE+1000;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
size_t window_duration = std::max((uint64_t)1000, time_now-start_time);
|
|
|
|
audio.get(window_duration, pcmf32);
|
|
|
|
while (!::vad_simple(pcmf32, WHISPER_SAMPLE_RATE, 1000, params.vad_thold, params.freq_thold, params.print_energy)) {
|
|
|
|
std::this_thread::sleep_for(milliseconds(100));
|
|
|
|
time_now = time_point_cast<milliseconds>(system_clock::now()).time_since_epoch().count();
|
|
|
|
window_duration = std::max((uint64_t)1000,time_now-start_time);
|
|
|
|
audio.get(window_duration, pcmf32);
|
|
|
|
}
|
|
|
|
if (time_now - start_time > maxlength_ms) {
|
|
|
|
audio.get(maxlength_ms, pcmf32);
|
|
|
|
} else {
|
|
|
|
audio.get(time_now - start_time, pcmf32);
|
|
|
|
}
|
|
|
|
|
|
|
|
return time_now;
|
|
|
|
}
|
|
|
|
|
2024-06-26 16:34:09 +00:00
|
|
|
static json unguided_transcription(struct whisper_context * ctx, audio_async &audio, json jparams, const whisper_params ¶ms) {
|
examples : vim plugin and LSP server (#1144)
* Initial proof of concept Vim plugin
At present, this is likely only slightly better than feature parity with
the existing whisper.nvim
Known issues:
Trailing whitespace
Up to an existing length(5 seconds) of speech may be processed when
listening is enabled
CPU cycles are spent processing speech even when not listening.
Fixing these issues is likely dependent upon future efforts to create a
dedicated library instead of wrapping examples/stream
* Support $WHISPER_CPP_HOME environment variable
A minor misunderstanding of the whisper.nvim implementation resulted in
a plugin that was functional, but not a drop in replacement as it should
be now.
* Initial progress on LSP implementation
Libcall is nonviable because the library is immediately freed after a
call is made. Further investigation has shown Language Server Protocol as
a promising alternative that both simplifies the required logic on the
vimscript side and increases the ease with which plugins for other
editors could be made in the future. This is a very large undertaking
and my progress has slowed substantially.
Work is far from being in a usable state, but I wish to keep track of
major refactors for organizational purposes.
* Rewrite audio windowing of guided transcription
One of the defining goals of this venture is allowing consecutive
commands to be rattled off without the existing deadzones of the current
implementation.
* Add unguided_transcription. Cleanup.
The unguided transcription implantation heavily borrows from existing
example implementations and the guided_transcription logic.
A high level pass was done to check that method arguments are accurate
to what inputs are actually required.
A first attempt at cancellation support was added for record keeping,
but will be deleted in a future commit.
* Fix compilation.
Resolves a large number of compilation errors.
No testing has been done yet for execution errors.
Update Makefile and .gitignore
* Functional unguided_transcription
* Functional guided_transcription
Fix commandset_list being passed by value
Properly register the first token of a multitoken command
* Minor changes before time fix
I've apparently made an awfully major mistake in thinking that unix time
was in milliseconds and will be changing all timekeeping code to use
standardized methods.
In preparation for this is a number of minor bugfixes.
Output is manually flushed.
An echo method has been added.
registerCommandset now wraps the returned index
* Swap timekeeping to use std::chrono
* Add work in progress lsp backed whisper.vim plugin
Current progress blockers are
Adding modality awareness to the command processing
(specifically, motion prompting)
Improving the VAD to be a little more responsive
(testing start of activity)
* Reworked vim plugin command loop
* Fix change inside
Multiple bug fixes that, crucially, bring the plugin to the point where a
demonstration video is possible
Add better echo messaging so whisper_log isn't required
Add loading complete message as indicator when listening has started
Insert/append are actually included in command sets
Some more heavy handed corrections to prevent a double exit when leaving
insert mode
As a somewhat hacky fix, the very first space is removed when inserting.
This cleans up most use cases, but leaves me unsatisfied with the few
cases it would be desired.
* Forcibly set commandset_index to 0 after subinsert
Also remove unnecessary ! to use builtin vim command
* Fix upper
A minor scope mistake was causing upper'd inputs to be eaten.
This was fixed and echoing was slightly improved for clarity.
* Fix formatting
Corrects indentation to 4 spaces as project standard
Slightly better error support for malformed json input
* Remove obsolete vim plugin
* Add json.hpp library
The same library that is used for the llama.cpp server
* Minor cleanups
add lsp to the make clean directive.
remove a redundant params definition.
reorder whisper.vim logging for subtranscriptions
Corrections to unlets (variables of argument scope appear immutable)
* Fix indentation. Fallback for subTranscription
Indentation has been changed to 4 spaces.
Unit testing has been set up, I'm opting not to include it in the
repository for now.
It however, has revealed a bug in the state logic where a
subtranscription can be initiated without having a saved command
When this occurs, append is added as a fallback
* Move audio polling logic to a subfunction
While work on the improved vad will continue, It's grown to be a little
out of scope. Instead, a future commit will perform multiple detection
passes at substretches of audio when a backlog of audio exists.
To facilitate this, and prevent code duplication, the vad code has been
moved into a subfunction shared by both the unguided and guided
transcription functions.
* Test for voice over subchunks if backlog > 1s
As the existing VAD implementation only checks for a falling edge at the
end of an audio chunk. It fails to detect voice in cases where the
recorded voice is only at the beginning of the audio.
To ameliorate this, when the timestamp would cause analysis of audio
over a second in length, it is split into 1 second length subchunks
which are individually tested.
Results are promising, but there seems to be a remaining bug with
unguided transcription likely related to saving context
* Limit the maximum length of audio input.
This existing VAD implementation only detects falling edges, which
means any gap in the users speaking is processed for transcription.
This simply establishes a constant maximum length depending on the type
of transcription. Uguided gets a generous 10 seconds and guided, 2.
While quick testing showed that commands are generally around a half a
second to a second, limiting commands to an even second resulted in
extreme degradation of quality. (Seemingly always the same output for a
given commandset)
* Unguided timestamp tracking, cleanup
Unguided transcriptions where not setup to allow for passing of
timestamp data forward, but have been corrected.
No_context is now always set to false. While conceptually desirable for
the quality of guided transcription, It was seemingly responsible for
prior command inputs ghosting in unguided transcription.
Save and Run are now tracked by command number instead of command text.
While command_text was provided for convenience, I wish to keep command
index authoritative. This gives greater consistency and potentially
allows for end users to rename or even translate the spoken versions of
these commands
* By default, maintain mode.
Previously, mode was reset to 0 unless otherwise set.
In addition to causing some edge cases, this was didn't mesh well with
the existing approach to visual mode.
With this change, initial tests indicate visual mode is functional.
* Add undo breaks before subtranscriptions
Subtranscriptions use undo as a hack to allow for partial responses to
be displayed. However, scripts don't cause an undo break mid execution
unless specifically instructed to. This meant that multiple
unguided transcriptions from a single session would cause a latter to
undo a former.
This is now fixed and undo should be reasonably usable as a command.
* Append instead of insert for new undo sequence
When entering and leavening insert mode with `i`, the cursor shifts one
column to the left. This is remedied by using append instead of insert
for setting these breaks in the undo sequence
`-` was also added to the pronunciation dictionary to be pronounced as
minus as it was causing a particularly high failure rate.
* Move undo sequence breaks to command execution
Previously, undo sequence breaks were triggered when there was a command
that caused a move to insert mode. This caused commands that changed
state (like delete or paste) to be bundled together with into the last
command that caused text to be entered.
* Fix repeat. Add space, carrot, dollar commands
Repeat (.) wasn't being tracked properly just like undo and is being
manually tracked now.
While efforts have been made to properly handle spaces, it was
particularly finicky to add a single space when one is needed. A
special 'space' command has been added to insert a single space and move
the cursor after it.
Carrot and Dollar commands have been added for start of line and end of
line respectively. These are both simple to implement, and just a
matter of defining a pronunciation.
* Return error on duplicate in commandset
Not every command in the commandset tokenizes to a single token.
Because of this, it's possible for that two commands could resolve to
the same single token after subsequent tokens are discarded.
This commit adds a simple check for duplicates when a commandset is
registered and returns an error if so.
Additional code will be required later on the vim side to actually
process this error.
* Add support for user-defined commands
This adds a user definable dictionary from spoken keys to strings or
funcrefs. All keys are added to the commandlist and when spoken, trigger
the corresponding function.
Like "save" and "run", these user commands are only available when the
command buffer is empty.
* Add readme, update cmake
* Add area commandset. Refactor spoken_dict
Area commands (inside word, around sentence...) have been given a
commandset as considered earlier.
Verbose definitions for spoken_dict entries now use dicts instead of
lists. This shortens the definition for most keys that require it and
scales better with the addition of further commandsets
* Add mark, jump. Fix change under visual.
Mark (m) and jump (') have been added.
When a visual selection was executed upon a command that initiated a
subtranscription (change) the area of the visual selection is not
properly tracked which causes the attempt to stream in partial response
to fail. This is solved by disabling partial transcriptions from being
streamed when a subtranscription is started while in visual mode.
* Accommodate ignorecase. Fix change.
From testing on older different versions of vim, the test for
distinguishing an 'R' replace all from an 'r' replace could fail if
ignorecase was set. The comparison has been changed to explicitly
require case matching
Change detection has been moved to the execution section as it was missing the
change+motion case.
* Support registers. Fix README typo
There's no logic to prevent doubled register entry, but the functional
result is equivalent to if the same key order was typed into vim.
A minor typo in the readme. I've mismemorized the mnemonic for 't' as 'to'
instead of till., but 'to' can't be used as it's a homophone with '2'.
While there was no mistake in the actual logic, it was misleading to use
'to' in the readme.
2023-08-27 18:35:06 +00:00
|
|
|
std::vector<whisper_token> prompt_tokens;
|
|
|
|
std::vector<float> pcmf32;
|
|
|
|
uint64_t unprocessed_audio_timestamp = wait_for_vad(audio, jparams, params, 10000U, pcmf32);
|
|
|
|
|
|
|
|
whisper_full_params wparams = whisper_full_default_params(WHISPER_SAMPLING_GREEDY);
|
|
|
|
if (jparams.contains("prompt")) {
|
|
|
|
// unlikely to see much use. Under normal circumstances, no_context would be set to false
|
|
|
|
std::string prompt = jparams.at("prompt");
|
|
|
|
prompt_tokens.resize(1024);
|
|
|
|
int n = whisper_tokenize(ctx, prompt.c_str(), prompt_tokens.data(), 1024);
|
|
|
|
prompt_tokens.resize(n);
|
|
|
|
|
|
|
|
wparams.prompt_tokens = prompt_tokens.data();
|
|
|
|
wparams.prompt_n_tokens = prompt_tokens.size();
|
|
|
|
}
|
|
|
|
wparams.print_progress = false;
|
|
|
|
wparams.print_special = params.print_special;
|
|
|
|
wparams.print_realtime = false;
|
|
|
|
wparams.print_timestamps = false;
|
|
|
|
wparams.translate = params.translate;
|
|
|
|
wparams.no_context = jparams.value("no_context", true);
|
|
|
|
wparams.single_segment = true;
|
|
|
|
wparams.max_tokens = params.max_tokens;
|
|
|
|
wparams.language = params.language.c_str();
|
|
|
|
wparams.n_threads = params.n_threads;
|
|
|
|
|
|
|
|
wparams.audio_ctx = params.audio_ctx;
|
|
|
|
wparams.suppress_non_speech_tokens = true;
|
|
|
|
// run the transformer and a single decoding pass
|
|
|
|
if (whisper_full(ctx, wparams, pcmf32.data(), pcmf32.size()) != 0) {
|
|
|
|
fprintf(stderr, "%s: ERROR: whisper_full() failed\n", __func__);
|
|
|
|
throw json{
|
|
|
|
{"code", -32803},
|
|
|
|
{"message", "ERROR: whisper_full() failed"}
|
|
|
|
};
|
|
|
|
}
|
|
|
|
std::string result = whisper_full_get_segment_text(ctx,0);
|
|
|
|
return json {
|
|
|
|
{"transcription", result},
|
|
|
|
{"timestamp", unprocessed_audio_timestamp}
|
|
|
|
};
|
|
|
|
}
|
|
|
|
|
|
|
|
// command-list mode
|
|
|
|
// guide the transcription to match the most likely command from a provided list
|
2024-06-26 16:34:09 +00:00
|
|
|
static json guided_transcription(struct whisper_context * ctx, audio_async &audio, const whisper_params ¶ms, json jparams, std::vector<struct commandset> commandset_list) {
|
examples : vim plugin and LSP server (#1144)
* Initial proof of concept Vim plugin
At present, this is likely only slightly better than feature parity with
the existing whisper.nvim
Known issues:
Trailing whitespace
Up to an existing length(5 seconds) of speech may be processed when
listening is enabled
CPU cycles are spent processing speech even when not listening.
Fixing these issues is likely dependent upon future efforts to create a
dedicated library instead of wrapping examples/stream
* Support $WHISPER_CPP_HOME environment variable
A minor misunderstanding of the whisper.nvim implementation resulted in
a plugin that was functional, but not a drop in replacement as it should
be now.
* Initial progress on LSP implementation
Libcall is nonviable because the library is immediately freed after a
call is made. Further investigation has shown Language Server Protocol as
a promising alternative that both simplifies the required logic on the
vimscript side and increases the ease with which plugins for other
editors could be made in the future. This is a very large undertaking
and my progress has slowed substantially.
Work is far from being in a usable state, but I wish to keep track of
major refactors for organizational purposes.
* Rewrite audio windowing of guided transcription
One of the defining goals of this venture is allowing consecutive
commands to be rattled off without the existing deadzones of the current
implementation.
* Add unguided_transcription. Cleanup.
The unguided transcription implantation heavily borrows from existing
example implementations and the guided_transcription logic.
A high level pass was done to check that method arguments are accurate
to what inputs are actually required.
A first attempt at cancellation support was added for record keeping,
but will be deleted in a future commit.
* Fix compilation.
Resolves a large number of compilation errors.
No testing has been done yet for execution errors.
Update Makefile and .gitignore
* Functional unguided_transcription
* Functional guided_transcription
Fix commandset_list being passed by value
Properly register the first token of a multitoken command
* Minor changes before time fix
I've apparently made an awfully major mistake in thinking that unix time
was in milliseconds and will be changing all timekeeping code to use
standardized methods.
In preparation for this is a number of minor bugfixes.
Output is manually flushed.
An echo method has been added.
registerCommandset now wraps the returned index
* Swap timekeeping to use std::chrono
* Add work in progress lsp backed whisper.vim plugin
Current progress blockers are
Adding modality awareness to the command processing
(specifically, motion prompting)
Improving the VAD to be a little more responsive
(testing start of activity)
* Reworked vim plugin command loop
* Fix change inside
Multiple bug fixes that, crucially, bring the plugin to the point where a
demonstration video is possible
Add better echo messaging so whisper_log isn't required
Add loading complete message as indicator when listening has started
Insert/append are actually included in command sets
Some more heavy handed corrections to prevent a double exit when leaving
insert mode
As a somewhat hacky fix, the very first space is removed when inserting.
This cleans up most use cases, but leaves me unsatisfied with the few
cases it would be desired.
* Forcibly set commandset_index to 0 after subinsert
Also remove unnecessary ! to use builtin vim command
* Fix upper
A minor scope mistake was causing upper'd inputs to be eaten.
This was fixed and echoing was slightly improved for clarity.
* Fix formatting
Corrects indentation to 4 spaces as project standard
Slightly better error support for malformed json input
* Remove obsolete vim plugin
* Add json.hpp library
The same library that is used for the llama.cpp server
* Minor cleanups
add lsp to the make clean directive.
remove a redundant params definition.
reorder whisper.vim logging for subtranscriptions
Corrections to unlets (variables of argument scope appear immutable)
* Fix indentation. Fallback for subTranscription
Indentation has been changed to 4 spaces.
Unit testing has been set up, I'm opting not to include it in the
repository for now.
It however, has revealed a bug in the state logic where a
subtranscription can be initiated without having a saved command
When this occurs, append is added as a fallback
* Move audio polling logic to a subfunction
While work on the improved vad will continue, It's grown to be a little
out of scope. Instead, a future commit will perform multiple detection
passes at substretches of audio when a backlog of audio exists.
To facilitate this, and prevent code duplication, the vad code has been
moved into a subfunction shared by both the unguided and guided
transcription functions.
* Test for voice over subchunks if backlog > 1s
As the existing VAD implementation only checks for a falling edge at the
end of an audio chunk. It fails to detect voice in cases where the
recorded voice is only at the beginning of the audio.
To ameliorate this, when the timestamp would cause analysis of audio
over a second in length, it is split into 1 second length subchunks
which are individually tested.
Results are promising, but there seems to be a remaining bug with
unguided transcription likely related to saving context
* Limit the maximum length of audio input.
This existing VAD implementation only detects falling edges, which
means any gap in the users speaking is processed for transcription.
This simply establishes a constant maximum length depending on the type
of transcription. Uguided gets a generous 10 seconds and guided, 2.
While quick testing showed that commands are generally around a half a
second to a second, limiting commands to an even second resulted in
extreme degradation of quality. (Seemingly always the same output for a
given commandset)
* Unguided timestamp tracking, cleanup
Unguided transcriptions where not setup to allow for passing of
timestamp data forward, but have been corrected.
No_context is now always set to false. While conceptually desirable for
the quality of guided transcription, It was seemingly responsible for
prior command inputs ghosting in unguided transcription.
Save and Run are now tracked by command number instead of command text.
While command_text was provided for convenience, I wish to keep command
index authoritative. This gives greater consistency and potentially
allows for end users to rename or even translate the spoken versions of
these commands
* By default, maintain mode.
Previously, mode was reset to 0 unless otherwise set.
In addition to causing some edge cases, this was didn't mesh well with
the existing approach to visual mode.
With this change, initial tests indicate visual mode is functional.
* Add undo breaks before subtranscriptions
Subtranscriptions use undo as a hack to allow for partial responses to
be displayed. However, scripts don't cause an undo break mid execution
unless specifically instructed to. This meant that multiple
unguided transcriptions from a single session would cause a latter to
undo a former.
This is now fixed and undo should be reasonably usable as a command.
* Append instead of insert for new undo sequence
When entering and leavening insert mode with `i`, the cursor shifts one
column to the left. This is remedied by using append instead of insert
for setting these breaks in the undo sequence
`-` was also added to the pronunciation dictionary to be pronounced as
minus as it was causing a particularly high failure rate.
* Move undo sequence breaks to command execution
Previously, undo sequence breaks were triggered when there was a command
that caused a move to insert mode. This caused commands that changed
state (like delete or paste) to be bundled together with into the last
command that caused text to be entered.
* Fix repeat. Add space, carrot, dollar commands
Repeat (.) wasn't being tracked properly just like undo and is being
manually tracked now.
While efforts have been made to properly handle spaces, it was
particularly finicky to add a single space when one is needed. A
special 'space' command has been added to insert a single space and move
the cursor after it.
Carrot and Dollar commands have been added for start of line and end of
line respectively. These are both simple to implement, and just a
matter of defining a pronunciation.
* Return error on duplicate in commandset
Not every command in the commandset tokenizes to a single token.
Because of this, it's possible for that two commands could resolve to
the same single token after subsequent tokens are discarded.
This commit adds a simple check for duplicates when a commandset is
registered and returns an error if so.
Additional code will be required later on the vim side to actually
process this error.
* Add support for user-defined commands
This adds a user definable dictionary from spoken keys to strings or
funcrefs. All keys are added to the commandlist and when spoken, trigger
the corresponding function.
Like "save" and "run", these user commands are only available when the
command buffer is empty.
* Add readme, update cmake
* Add area commandset. Refactor spoken_dict
Area commands (inside word, around sentence...) have been given a
commandset as considered earlier.
Verbose definitions for spoken_dict entries now use dicts instead of
lists. This shortens the definition for most keys that require it and
scales better with the addition of further commandsets
* Add mark, jump. Fix change under visual.
Mark (m) and jump (') have been added.
When a visual selection was executed upon a command that initiated a
subtranscription (change) the area of the visual selection is not
properly tracked which causes the attempt to stream in partial response
to fail. This is solved by disabling partial transcriptions from being
streamed when a subtranscription is started while in visual mode.
* Accommodate ignorecase. Fix change.
From testing on older different versions of vim, the test for
distinguishing an 'R' replace all from an 'r' replace could fail if
ignorecase was set. The comparison has been changed to explicitly
require case matching
Change detection has been moved to the execution section as it was missing the
change+motion case.
* Support registers. Fix README typo
There's no logic to prevent doubled register entry, but the functional
result is equivalent to if the same key order was typed into vim.
A minor typo in the readme. I've mismemorized the mnemonic for 't' as 'to'
instead of till., but 'to' can't be used as it's a homophone with '2'.
While there was no mistake in the actual logic, it was misleading to use
'to' in the readme.
2023-08-27 18:35:06 +00:00
|
|
|
struct commandset cs = commandset_list[jparams.value("commandset_index", commandset_list.size()-1)];
|
|
|
|
std::vector<float> pcmf32;
|
|
|
|
uint64_t unprocessed_audio_timestamp = wait_for_vad(audio, jparams, params, 2000U, pcmf32);
|
|
|
|
|
|
|
|
fprintf(stderr, "%s: Speech detected! Processing ...\n", __func__);
|
|
|
|
whisper_full_params wparams = whisper_full_default_params(WHISPER_SAMPLING_GREEDY);
|
|
|
|
|
|
|
|
wparams.print_progress = false;
|
|
|
|
wparams.print_special = params.print_special;
|
|
|
|
wparams.print_realtime = false;
|
|
|
|
wparams.print_timestamps = false;
|
|
|
|
wparams.translate = params.translate;
|
|
|
|
wparams.no_context = true;
|
|
|
|
wparams.single_segment = true;
|
|
|
|
wparams.max_tokens = 1;
|
|
|
|
wparams.language = params.language.c_str();
|
|
|
|
wparams.n_threads = params.n_threads;
|
|
|
|
|
|
|
|
wparams.audio_ctx = params.audio_ctx;
|
|
|
|
|
|
|
|
// TODO: Do some time testing. Does an overly long prompt slow down processing?
|
|
|
|
// Set up command sets/precompute prompts
|
|
|
|
wparams.prompt_tokens = cs.prompt_tokens.data();
|
|
|
|
wparams.prompt_n_tokens = cs.prompt_tokens.size();
|
|
|
|
// TODO: properly expose as option
|
|
|
|
wparams.suppress_non_speech_tokens = true;
|
|
|
|
|
|
|
|
// run the transformer and a single decoding pass
|
|
|
|
if (whisper_full(ctx, wparams, pcmf32.data(), pcmf32.size()) != 0) {
|
|
|
|
fprintf(stderr, "%s: ERROR: whisper_full() failed\n", __func__);
|
|
|
|
throw json{
|
|
|
|
{"code", -32803},
|
|
|
|
{"message", "ERROR: whisper_full() failed"}//TODO: format string (sprintf?)
|
|
|
|
};
|
|
|
|
}
|
|
|
|
|
|
|
|
// estimate command probability
|
|
|
|
// NOTE: not optimal
|
|
|
|
{
|
|
|
|
const auto * logits = whisper_get_logits(ctx);
|
|
|
|
|
|
|
|
std::vector<float> probs(whisper_n_vocab(ctx), 0.0f);
|
|
|
|
|
|
|
|
// compute probs from logits via softmax
|
|
|
|
{
|
|
|
|
float max = -1e9;
|
|
|
|
for (int i = 0; i < (int) probs.size(); ++i) {
|
|
|
|
max = std::max(max, logits[i]);
|
|
|
|
}
|
|
|
|
|
|
|
|
float sum = 0.0f;
|
|
|
|
for (int i = 0; i < (int) probs.size(); ++i) {
|
|
|
|
probs[i] = expf(logits[i] - max);
|
|
|
|
sum += probs[i];
|
|
|
|
}
|
|
|
|
|
|
|
|
for (int i = 0; i < (int) probs.size(); ++i) {
|
|
|
|
probs[i] /= sum;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
std::vector<std::pair<float, int>> probs_id;
|
|
|
|
|
|
|
|
// In my testing, the most verbose token is always the desired.
|
|
|
|
// TODO: Trim commandset struct once efficacy has been verified
|
|
|
|
for (int i = 0; i < (int) cs.commands.size(); ++i) {
|
|
|
|
probs_id.emplace_back(probs[cs.commands[i].tokens[0]], i);
|
|
|
|
}
|
|
|
|
|
|
|
|
// sort descending
|
|
|
|
{
|
|
|
|
using pair_type = decltype(probs_id)::value_type;
|
|
|
|
std::sort(probs_id.begin(), probs_id.end(), [](const pair_type & a, const pair_type & b) {
|
|
|
|
return a.first > b.first;
|
|
|
|
});
|
|
|
|
}
|
|
|
|
int id = probs_id[0].second;
|
|
|
|
return json{
|
|
|
|
{"command_index", id},
|
|
|
|
{"command_text", cs.commands[id].plaintext},
|
|
|
|
{"timestamp", unprocessed_audio_timestamp},
|
|
|
|
};
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2024-06-26 16:34:09 +00:00
|
|
|
static json register_commandset(struct whisper_context * ctx, json jparams, std::vector<struct commandset> &commandset_list) {
|
examples : vim plugin and LSP server (#1144)
* Initial proof of concept Vim plugin
At present, this is likely only slightly better than feature parity with
the existing whisper.nvim
Known issues:
Trailing whitespace
Up to an existing length(5 seconds) of speech may be processed when
listening is enabled
CPU cycles are spent processing speech even when not listening.
Fixing these issues is likely dependent upon future efforts to create a
dedicated library instead of wrapping examples/stream
* Support $WHISPER_CPP_HOME environment variable
A minor misunderstanding of the whisper.nvim implementation resulted in
a plugin that was functional, but not a drop in replacement as it should
be now.
* Initial progress on LSP implementation
Libcall is nonviable because the library is immediately freed after a
call is made. Further investigation has shown Language Server Protocol as
a promising alternative that both simplifies the required logic on the
vimscript side and increases the ease with which plugins for other
editors could be made in the future. This is a very large undertaking
and my progress has slowed substantially.
Work is far from being in a usable state, but I wish to keep track of
major refactors for organizational purposes.
* Rewrite audio windowing of guided transcription
One of the defining goals of this venture is allowing consecutive
commands to be rattled off without the existing deadzones of the current
implementation.
* Add unguided_transcription. Cleanup.
The unguided transcription implantation heavily borrows from existing
example implementations and the guided_transcription logic.
A high level pass was done to check that method arguments are accurate
to what inputs are actually required.
A first attempt at cancellation support was added for record keeping,
but will be deleted in a future commit.
* Fix compilation.
Resolves a large number of compilation errors.
No testing has been done yet for execution errors.
Update Makefile and .gitignore
* Functional unguided_transcription
* Functional guided_transcription
Fix commandset_list being passed by value
Properly register the first token of a multitoken command
* Minor changes before time fix
I've apparently made an awfully major mistake in thinking that unix time
was in milliseconds and will be changing all timekeeping code to use
standardized methods.
In preparation for this is a number of minor bugfixes.
Output is manually flushed.
An echo method has been added.
registerCommandset now wraps the returned index
* Swap timekeeping to use std::chrono
* Add work in progress lsp backed whisper.vim plugin
Current progress blockers are
Adding modality awareness to the command processing
(specifically, motion prompting)
Improving the VAD to be a little more responsive
(testing start of activity)
* Reworked vim plugin command loop
* Fix change inside
Multiple bug fixes that, crucially, bring the plugin to the point where a
demonstration video is possible
Add better echo messaging so whisper_log isn't required
Add loading complete message as indicator when listening has started
Insert/append are actually included in command sets
Some more heavy handed corrections to prevent a double exit when leaving
insert mode
As a somewhat hacky fix, the very first space is removed when inserting.
This cleans up most use cases, but leaves me unsatisfied with the few
cases it would be desired.
* Forcibly set commandset_index to 0 after subinsert
Also remove unnecessary ! to use builtin vim command
* Fix upper
A minor scope mistake was causing upper'd inputs to be eaten.
This was fixed and echoing was slightly improved for clarity.
* Fix formatting
Corrects indentation to 4 spaces as project standard
Slightly better error support for malformed json input
* Remove obsolete vim plugin
* Add json.hpp library
The same library that is used for the llama.cpp server
* Minor cleanups
add lsp to the make clean directive.
remove a redundant params definition.
reorder whisper.vim logging for subtranscriptions
Corrections to unlets (variables of argument scope appear immutable)
* Fix indentation. Fallback for subTranscription
Indentation has been changed to 4 spaces.
Unit testing has been set up, I'm opting not to include it in the
repository for now.
It however, has revealed a bug in the state logic where a
subtranscription can be initiated without having a saved command
When this occurs, append is added as a fallback
* Move audio polling logic to a subfunction
While work on the improved vad will continue, It's grown to be a little
out of scope. Instead, a future commit will perform multiple detection
passes at substretches of audio when a backlog of audio exists.
To facilitate this, and prevent code duplication, the vad code has been
moved into a subfunction shared by both the unguided and guided
transcription functions.
* Test for voice over subchunks if backlog > 1s
As the existing VAD implementation only checks for a falling edge at the
end of an audio chunk. It fails to detect voice in cases where the
recorded voice is only at the beginning of the audio.
To ameliorate this, when the timestamp would cause analysis of audio
over a second in length, it is split into 1 second length subchunks
which are individually tested.
Results are promising, but there seems to be a remaining bug with
unguided transcription likely related to saving context
* Limit the maximum length of audio input.
This existing VAD implementation only detects falling edges, which
means any gap in the users speaking is processed for transcription.
This simply establishes a constant maximum length depending on the type
of transcription. Uguided gets a generous 10 seconds and guided, 2.
While quick testing showed that commands are generally around a half a
second to a second, limiting commands to an even second resulted in
extreme degradation of quality. (Seemingly always the same output for a
given commandset)
* Unguided timestamp tracking, cleanup
Unguided transcriptions where not setup to allow for passing of
timestamp data forward, but have been corrected.
No_context is now always set to false. While conceptually desirable for
the quality of guided transcription, It was seemingly responsible for
prior command inputs ghosting in unguided transcription.
Save and Run are now tracked by command number instead of command text.
While command_text was provided for convenience, I wish to keep command
index authoritative. This gives greater consistency and potentially
allows for end users to rename or even translate the spoken versions of
these commands
* By default, maintain mode.
Previously, mode was reset to 0 unless otherwise set.
In addition to causing some edge cases, this was didn't mesh well with
the existing approach to visual mode.
With this change, initial tests indicate visual mode is functional.
* Add undo breaks before subtranscriptions
Subtranscriptions use undo as a hack to allow for partial responses to
be displayed. However, scripts don't cause an undo break mid execution
unless specifically instructed to. This meant that multiple
unguided transcriptions from a single session would cause a latter to
undo a former.
This is now fixed and undo should be reasonably usable as a command.
* Append instead of insert for new undo sequence
When entering and leavening insert mode with `i`, the cursor shifts one
column to the left. This is remedied by using append instead of insert
for setting these breaks in the undo sequence
`-` was also added to the pronunciation dictionary to be pronounced as
minus as it was causing a particularly high failure rate.
* Move undo sequence breaks to command execution
Previously, undo sequence breaks were triggered when there was a command
that caused a move to insert mode. This caused commands that changed
state (like delete or paste) to be bundled together with into the last
command that caused text to be entered.
* Fix repeat. Add space, carrot, dollar commands
Repeat (.) wasn't being tracked properly just like undo and is being
manually tracked now.
While efforts have been made to properly handle spaces, it was
particularly finicky to add a single space when one is needed. A
special 'space' command has been added to insert a single space and move
the cursor after it.
Carrot and Dollar commands have been added for start of line and end of
line respectively. These are both simple to implement, and just a
matter of defining a pronunciation.
* Return error on duplicate in commandset
Not every command in the commandset tokenizes to a single token.
Because of this, it's possible for that two commands could resolve to
the same single token after subsequent tokens are discarded.
This commit adds a simple check for duplicates when a commandset is
registered and returns an error if so.
Additional code will be required later on the vim side to actually
process this error.
* Add support for user-defined commands
This adds a user definable dictionary from spoken keys to strings or
funcrefs. All keys are added to the commandlist and when spoken, trigger
the corresponding function.
Like "save" and "run", these user commands are only available when the
command buffer is empty.
* Add readme, update cmake
* Add area commandset. Refactor spoken_dict
Area commands (inside word, around sentence...) have been given a
commandset as considered earlier.
Verbose definitions for spoken_dict entries now use dicts instead of
lists. This shortens the definition for most keys that require it and
scales better with the addition of further commandsets
* Add mark, jump. Fix change under visual.
Mark (m) and jump (') have been added.
When a visual selection was executed upon a command that initiated a
subtranscription (change) the area of the visual selection is not
properly tracked which causes the attempt to stream in partial response
to fail. This is solved by disabling partial transcriptions from being
streamed when a subtranscription is started while in visual mode.
* Accommodate ignorecase. Fix change.
From testing on older different versions of vim, the test for
distinguishing an 'R' replace all from an 'r' replace could fail if
ignorecase was set. The comparison has been changed to explicitly
require case matching
Change detection has been moved to the execution section as it was missing the
change+motion case.
* Support registers. Fix README typo
There's no logic to prevent doubled register entry, but the functional
result is equivalent to if the same key order was typed into vim.
A minor typo in the readme. I've mismemorized the mnemonic for 't' as 'to'
instead of till., but 'to' can't be used as it's a homophone with '2'.
While there was no mistake in the actual logic, it was misleading to use
'to' in the readme.
2023-08-27 18:35:06 +00:00
|
|
|
// TODO: check for token collision
|
|
|
|
struct commandset cs;
|
|
|
|
|
|
|
|
std::string k_prompt = " select one from the available words: ";
|
|
|
|
std::set<whisper_token> token_set;
|
|
|
|
whisper_token tokens[32];
|
|
|
|
for (std::string s : jparams) {
|
|
|
|
std::vector<whisper_token> token_vec;
|
|
|
|
// The existing command implementation uses a nested for loop to tokenize single characters
|
|
|
|
// I fail to see the purpose of this when ' a' has a wholly different pronunciation than the start of ' apple'
|
|
|
|
const int n = whisper_tokenize(ctx, (" " + s).c_str(), tokens, 32);
|
|
|
|
if (n < 0) {
|
|
|
|
fprintf(stderr, "%s: error: failed to tokenize command '%s'\n", __func__, s.c_str());
|
|
|
|
return 3;
|
|
|
|
}
|
|
|
|
token_vec.push_back(tokens[0]);
|
|
|
|
if (!token_set.insert(tokens[0]).second) {
|
|
|
|
fprintf(stderr, "%s: warning: %s is a duplicate of an existing token\n", __func__, s.c_str());
|
|
|
|
throw json{
|
|
|
|
{"code",-31000},
|
|
|
|
{"message", "Duplicate token in token set: " + s}
|
|
|
|
};
|
|
|
|
}
|
|
|
|
if (n > 1) {// empty string if n=0? Should never occur
|
|
|
|
fprintf(stderr, "%s: error: command is more than a single token: %s\n", __func__, s.c_str());
|
|
|
|
}
|
|
|
|
struct command command = {token_vec, s};
|
|
|
|
cs.commands.push_back(command);
|
|
|
|
k_prompt += s;
|
|
|
|
}
|
|
|
|
k_prompt = k_prompt.substr(0,k_prompt.length()-2) + ". Selected word:";
|
|
|
|
cs.prompt_tokens.resize(1024);
|
|
|
|
int n = whisper_tokenize(ctx, k_prompt.c_str(), cs.prompt_tokens.data(), 1024);
|
|
|
|
cs.prompt_tokens.resize(n);
|
|
|
|
// prepare response
|
|
|
|
int index = commandset_list.size();
|
|
|
|
commandset_list.push_back(cs);
|
|
|
|
return json{{"index",index}};
|
|
|
|
}
|
2024-06-26 16:34:09 +00:00
|
|
|
|
|
|
|
static json seek(struct whisper_context * /*ctx*/, audio_async & /*audio*/, json /*params*/) {
|
examples : vim plugin and LSP server (#1144)
* Initial proof of concept Vim plugin
At present, this is likely only slightly better than feature parity with
the existing whisper.nvim
Known issues:
Trailing whitespace
Up to an existing length(5 seconds) of speech may be processed when
listening is enabled
CPU cycles are spent processing speech even when not listening.
Fixing these issues is likely dependent upon future efforts to create a
dedicated library instead of wrapping examples/stream
* Support $WHISPER_CPP_HOME environment variable
A minor misunderstanding of the whisper.nvim implementation resulted in
a plugin that was functional, but not a drop in replacement as it should
be now.
* Initial progress on LSP implementation
Libcall is nonviable because the library is immediately freed after a
call is made. Further investigation has shown Language Server Protocol as
a promising alternative that both simplifies the required logic on the
vimscript side and increases the ease with which plugins for other
editors could be made in the future. This is a very large undertaking
and my progress has slowed substantially.
Work is far from being in a usable state, but I wish to keep track of
major refactors for organizational purposes.
* Rewrite audio windowing of guided transcription
One of the defining goals of this venture is allowing consecutive
commands to be rattled off without the existing deadzones of the current
implementation.
* Add unguided_transcription. Cleanup.
The unguided transcription implantation heavily borrows from existing
example implementations and the guided_transcription logic.
A high level pass was done to check that method arguments are accurate
to what inputs are actually required.
A first attempt at cancellation support was added for record keeping,
but will be deleted in a future commit.
* Fix compilation.
Resolves a large number of compilation errors.
No testing has been done yet for execution errors.
Update Makefile and .gitignore
* Functional unguided_transcription
* Functional guided_transcription
Fix commandset_list being passed by value
Properly register the first token of a multitoken command
* Minor changes before time fix
I've apparently made an awfully major mistake in thinking that unix time
was in milliseconds and will be changing all timekeeping code to use
standardized methods.
In preparation for this is a number of minor bugfixes.
Output is manually flushed.
An echo method has been added.
registerCommandset now wraps the returned index
* Swap timekeeping to use std::chrono
* Add work in progress lsp backed whisper.vim plugin
Current progress blockers are
Adding modality awareness to the command processing
(specifically, motion prompting)
Improving the VAD to be a little more responsive
(testing start of activity)
* Reworked vim plugin command loop
* Fix change inside
Multiple bug fixes that, crucially, bring the plugin to the point where a
demonstration video is possible
Add better echo messaging so whisper_log isn't required
Add loading complete message as indicator when listening has started
Insert/append are actually included in command sets
Some more heavy handed corrections to prevent a double exit when leaving
insert mode
As a somewhat hacky fix, the very first space is removed when inserting.
This cleans up most use cases, but leaves me unsatisfied with the few
cases it would be desired.
* Forcibly set commandset_index to 0 after subinsert
Also remove unnecessary ! to use builtin vim command
* Fix upper
A minor scope mistake was causing upper'd inputs to be eaten.
This was fixed and echoing was slightly improved for clarity.
* Fix formatting
Corrects indentation to 4 spaces as project standard
Slightly better error support for malformed json input
* Remove obsolete vim plugin
* Add json.hpp library
The same library that is used for the llama.cpp server
* Minor cleanups
add lsp to the make clean directive.
remove a redundant params definition.
reorder whisper.vim logging for subtranscriptions
Corrections to unlets (variables of argument scope appear immutable)
* Fix indentation. Fallback for subTranscription
Indentation has been changed to 4 spaces.
Unit testing has been set up, I'm opting not to include it in the
repository for now.
It however, has revealed a bug in the state logic where a
subtranscription can be initiated without having a saved command
When this occurs, append is added as a fallback
* Move audio polling logic to a subfunction
While work on the improved vad will continue, It's grown to be a little
out of scope. Instead, a future commit will perform multiple detection
passes at substretches of audio when a backlog of audio exists.
To facilitate this, and prevent code duplication, the vad code has been
moved into a subfunction shared by both the unguided and guided
transcription functions.
* Test for voice over subchunks if backlog > 1s
As the existing VAD implementation only checks for a falling edge at the
end of an audio chunk. It fails to detect voice in cases where the
recorded voice is only at the beginning of the audio.
To ameliorate this, when the timestamp would cause analysis of audio
over a second in length, it is split into 1 second length subchunks
which are individually tested.
Results are promising, but there seems to be a remaining bug with
unguided transcription likely related to saving context
* Limit the maximum length of audio input.
This existing VAD implementation only detects falling edges, which
means any gap in the users speaking is processed for transcription.
This simply establishes a constant maximum length depending on the type
of transcription. Uguided gets a generous 10 seconds and guided, 2.
While quick testing showed that commands are generally around a half a
second to a second, limiting commands to an even second resulted in
extreme degradation of quality. (Seemingly always the same output for a
given commandset)
* Unguided timestamp tracking, cleanup
Unguided transcriptions where not setup to allow for passing of
timestamp data forward, but have been corrected.
No_context is now always set to false. While conceptually desirable for
the quality of guided transcription, It was seemingly responsible for
prior command inputs ghosting in unguided transcription.
Save and Run are now tracked by command number instead of command text.
While command_text was provided for convenience, I wish to keep command
index authoritative. This gives greater consistency and potentially
allows for end users to rename or even translate the spoken versions of
these commands
* By default, maintain mode.
Previously, mode was reset to 0 unless otherwise set.
In addition to causing some edge cases, this was didn't mesh well with
the existing approach to visual mode.
With this change, initial tests indicate visual mode is functional.
* Add undo breaks before subtranscriptions
Subtranscriptions use undo as a hack to allow for partial responses to
be displayed. However, scripts don't cause an undo break mid execution
unless specifically instructed to. This meant that multiple
unguided transcriptions from a single session would cause a latter to
undo a former.
This is now fixed and undo should be reasonably usable as a command.
* Append instead of insert for new undo sequence
When entering and leavening insert mode with `i`, the cursor shifts one
column to the left. This is remedied by using append instead of insert
for setting these breaks in the undo sequence
`-` was also added to the pronunciation dictionary to be pronounced as
minus as it was causing a particularly high failure rate.
* Move undo sequence breaks to command execution
Previously, undo sequence breaks were triggered when there was a command
that caused a move to insert mode. This caused commands that changed
state (like delete or paste) to be bundled together with into the last
command that caused text to be entered.
* Fix repeat. Add space, carrot, dollar commands
Repeat (.) wasn't being tracked properly just like undo and is being
manually tracked now.
While efforts have been made to properly handle spaces, it was
particularly finicky to add a single space when one is needed. A
special 'space' command has been added to insert a single space and move
the cursor after it.
Carrot and Dollar commands have been added for start of line and end of
line respectively. These are both simple to implement, and just a
matter of defining a pronunciation.
* Return error on duplicate in commandset
Not every command in the commandset tokenizes to a single token.
Because of this, it's possible for that two commands could resolve to
the same single token after subsequent tokens are discarded.
This commit adds a simple check for duplicates when a commandset is
registered and returns an error if so.
Additional code will be required later on the vim side to actually
process this error.
* Add support for user-defined commands
This adds a user definable dictionary from spoken keys to strings or
funcrefs. All keys are added to the commandlist and when spoken, trigger
the corresponding function.
Like "save" and "run", these user commands are only available when the
command buffer is empty.
* Add readme, update cmake
* Add area commandset. Refactor spoken_dict
Area commands (inside word, around sentence...) have been given a
commandset as considered earlier.
Verbose definitions for spoken_dict entries now use dicts instead of
lists. This shortens the definition for most keys that require it and
scales better with the addition of further commandsets
* Add mark, jump. Fix change under visual.
Mark (m) and jump (') have been added.
When a visual selection was executed upon a command that initiated a
subtranscription (change) the area of the visual selection is not
properly tracked which causes the attempt to stream in partial response
to fail. This is solved by disabling partial transcriptions from being
streamed when a subtranscription is started while in visual mode.
* Accommodate ignorecase. Fix change.
From testing on older different versions of vim, the test for
distinguishing an 'R' replace all from an 'r' replace could fail if
ignorecase was set. The comparison has been changed to explicitly
require case matching
Change detection has been moved to the execution section as it was missing the
change+motion case.
* Support registers. Fix README typo
There's no logic to prevent doubled register entry, but the functional
result is equivalent to if the same key order was typed into vim.
A minor typo in the readme. I've mismemorized the mnemonic for 't' as 'to'
instead of till., but 'to' can't be used as it's a homophone with '2'.
While there was no mistake in the actual logic, it was misleading to use
'to' in the readme.
2023-08-27 18:35:06 +00:00
|
|
|
// whisper_state has the pertinent offsets, but there also seem to be a large
|
|
|
|
// number of scratch buffers that would prevent rewinding context in a manner similar to llama
|
|
|
|
// I'll give this a another pass once everything else is implemented,
|
|
|
|
// but for now, it's unsupported
|
2023-09-07 09:33:12 +00:00
|
|
|
throw json {
|
examples : vim plugin and LSP server (#1144)
* Initial proof of concept Vim plugin
At present, this is likely only slightly better than feature parity with
the existing whisper.nvim
Known issues:
Trailing whitespace
Up to an existing length(5 seconds) of speech may be processed when
listening is enabled
CPU cycles are spent processing speech even when not listening.
Fixing these issues is likely dependent upon future efforts to create a
dedicated library instead of wrapping examples/stream
* Support $WHISPER_CPP_HOME environment variable
A minor misunderstanding of the whisper.nvim implementation resulted in
a plugin that was functional, but not a drop in replacement as it should
be now.
* Initial progress on LSP implementation
Libcall is nonviable because the library is immediately freed after a
call is made. Further investigation has shown Language Server Protocol as
a promising alternative that both simplifies the required logic on the
vimscript side and increases the ease with which plugins for other
editors could be made in the future. This is a very large undertaking
and my progress has slowed substantially.
Work is far from being in a usable state, but I wish to keep track of
major refactors for organizational purposes.
* Rewrite audio windowing of guided transcription
One of the defining goals of this venture is allowing consecutive
commands to be rattled off without the existing deadzones of the current
implementation.
* Add unguided_transcription. Cleanup.
The unguided transcription implantation heavily borrows from existing
example implementations and the guided_transcription logic.
A high level pass was done to check that method arguments are accurate
to what inputs are actually required.
A first attempt at cancellation support was added for record keeping,
but will be deleted in a future commit.
* Fix compilation.
Resolves a large number of compilation errors.
No testing has been done yet for execution errors.
Update Makefile and .gitignore
* Functional unguided_transcription
* Functional guided_transcription
Fix commandset_list being passed by value
Properly register the first token of a multitoken command
* Minor changes before time fix
I've apparently made an awfully major mistake in thinking that unix time
was in milliseconds and will be changing all timekeeping code to use
standardized methods.
In preparation for this is a number of minor bugfixes.
Output is manually flushed.
An echo method has been added.
registerCommandset now wraps the returned index
* Swap timekeeping to use std::chrono
* Add work in progress lsp backed whisper.vim plugin
Current progress blockers are
Adding modality awareness to the command processing
(specifically, motion prompting)
Improving the VAD to be a little more responsive
(testing start of activity)
* Reworked vim plugin command loop
* Fix change inside
Multiple bug fixes that, crucially, bring the plugin to the point where a
demonstration video is possible
Add better echo messaging so whisper_log isn't required
Add loading complete message as indicator when listening has started
Insert/append are actually included in command sets
Some more heavy handed corrections to prevent a double exit when leaving
insert mode
As a somewhat hacky fix, the very first space is removed when inserting.
This cleans up most use cases, but leaves me unsatisfied with the few
cases it would be desired.
* Forcibly set commandset_index to 0 after subinsert
Also remove unnecessary ! to use builtin vim command
* Fix upper
A minor scope mistake was causing upper'd inputs to be eaten.
This was fixed and echoing was slightly improved for clarity.
* Fix formatting
Corrects indentation to 4 spaces as project standard
Slightly better error support for malformed json input
* Remove obsolete vim plugin
* Add json.hpp library
The same library that is used for the llama.cpp server
* Minor cleanups
add lsp to the make clean directive.
remove a redundant params definition.
reorder whisper.vim logging for subtranscriptions
Corrections to unlets (variables of argument scope appear immutable)
* Fix indentation. Fallback for subTranscription
Indentation has been changed to 4 spaces.
Unit testing has been set up, I'm opting not to include it in the
repository for now.
It however, has revealed a bug in the state logic where a
subtranscription can be initiated without having a saved command
When this occurs, append is added as a fallback
* Move audio polling logic to a subfunction
While work on the improved vad will continue, It's grown to be a little
out of scope. Instead, a future commit will perform multiple detection
passes at substretches of audio when a backlog of audio exists.
To facilitate this, and prevent code duplication, the vad code has been
moved into a subfunction shared by both the unguided and guided
transcription functions.
* Test for voice over subchunks if backlog > 1s
As the existing VAD implementation only checks for a falling edge at the
end of an audio chunk. It fails to detect voice in cases where the
recorded voice is only at the beginning of the audio.
To ameliorate this, when the timestamp would cause analysis of audio
over a second in length, it is split into 1 second length subchunks
which are individually tested.
Results are promising, but there seems to be a remaining bug with
unguided transcription likely related to saving context
* Limit the maximum length of audio input.
This existing VAD implementation only detects falling edges, which
means any gap in the users speaking is processed for transcription.
This simply establishes a constant maximum length depending on the type
of transcription. Uguided gets a generous 10 seconds and guided, 2.
While quick testing showed that commands are generally around a half a
second to a second, limiting commands to an even second resulted in
extreme degradation of quality. (Seemingly always the same output for a
given commandset)
* Unguided timestamp tracking, cleanup
Unguided transcriptions where not setup to allow for passing of
timestamp data forward, but have been corrected.
No_context is now always set to false. While conceptually desirable for
the quality of guided transcription, It was seemingly responsible for
prior command inputs ghosting in unguided transcription.
Save and Run are now tracked by command number instead of command text.
While command_text was provided for convenience, I wish to keep command
index authoritative. This gives greater consistency and potentially
allows for end users to rename or even translate the spoken versions of
these commands
* By default, maintain mode.
Previously, mode was reset to 0 unless otherwise set.
In addition to causing some edge cases, this was didn't mesh well with
the existing approach to visual mode.
With this change, initial tests indicate visual mode is functional.
* Add undo breaks before subtranscriptions
Subtranscriptions use undo as a hack to allow for partial responses to
be displayed. However, scripts don't cause an undo break mid execution
unless specifically instructed to. This meant that multiple
unguided transcriptions from a single session would cause a latter to
undo a former.
This is now fixed and undo should be reasonably usable as a command.
* Append instead of insert for new undo sequence
When entering and leavening insert mode with `i`, the cursor shifts one
column to the left. This is remedied by using append instead of insert
for setting these breaks in the undo sequence
`-` was also added to the pronunciation dictionary to be pronounced as
minus as it was causing a particularly high failure rate.
* Move undo sequence breaks to command execution
Previously, undo sequence breaks were triggered when there was a command
that caused a move to insert mode. This caused commands that changed
state (like delete or paste) to be bundled together with into the last
command that caused text to be entered.
* Fix repeat. Add space, carrot, dollar commands
Repeat (.) wasn't being tracked properly just like undo and is being
manually tracked now.
While efforts have been made to properly handle spaces, it was
particularly finicky to add a single space when one is needed. A
special 'space' command has been added to insert a single space and move
the cursor after it.
Carrot and Dollar commands have been added for start of line and end of
line respectively. These are both simple to implement, and just a
matter of defining a pronunciation.
* Return error on duplicate in commandset
Not every command in the commandset tokenizes to a single token.
Because of this, it's possible for that two commands could resolve to
the same single token after subsequent tokens are discarded.
This commit adds a simple check for duplicates when a commandset is
registered and returns an error if so.
Additional code will be required later on the vim side to actually
process this error.
* Add support for user-defined commands
This adds a user definable dictionary from spoken keys to strings or
funcrefs. All keys are added to the commandlist and when spoken, trigger
the corresponding function.
Like "save" and "run", these user commands are only available when the
command buffer is empty.
* Add readme, update cmake
* Add area commandset. Refactor spoken_dict
Area commands (inside word, around sentence...) have been given a
commandset as considered earlier.
Verbose definitions for spoken_dict entries now use dicts instead of
lists. This shortens the definition for most keys that require it and
scales better with the addition of further commandsets
* Add mark, jump. Fix change under visual.
Mark (m) and jump (') have been added.
When a visual selection was executed upon a command that initiated a
subtranscription (change) the area of the visual selection is not
properly tracked which causes the attempt to stream in partial response
to fail. This is solved by disabling partial transcriptions from being
streamed when a subtranscription is started while in visual mode.
* Accommodate ignorecase. Fix change.
From testing on older different versions of vim, the test for
distinguishing an 'R' replace all from an 'r' replace could fail if
ignorecase was set. The comparison has been changed to explicitly
require case matching
Change detection has been moved to the execution section as it was missing the
change+motion case.
* Support registers. Fix README typo
There's no logic to prevent doubled register entry, but the functional
result is equivalent to if the same key order was typed into vim.
A minor typo in the readme. I've mismemorized the mnemonic for 't' as 'to'
instead of till., but 'to' can't be used as it's a homophone with '2'.
While there was no mistake in the actual logic, it was misleading to use
'to' in the readme.
2023-08-27 18:35:06 +00:00
|
|
|
{"code", -32601},
|
|
|
|
{"message", "Seeking is not yet supported."}
|
|
|
|
};
|
|
|
|
}
|
2024-06-26 16:34:09 +00:00
|
|
|
|
|
|
|
static json parse_job(const json &body, struct whisper_context * ctx, audio_async &audio, const whisper_params ¶ms, std::vector<struct commandset> &commandset_list) {
|
examples : vim plugin and LSP server (#1144)
* Initial proof of concept Vim plugin
At present, this is likely only slightly better than feature parity with
the existing whisper.nvim
Known issues:
Trailing whitespace
Up to an existing length(5 seconds) of speech may be processed when
listening is enabled
CPU cycles are spent processing speech even when not listening.
Fixing these issues is likely dependent upon future efforts to create a
dedicated library instead of wrapping examples/stream
* Support $WHISPER_CPP_HOME environment variable
A minor misunderstanding of the whisper.nvim implementation resulted in
a plugin that was functional, but not a drop in replacement as it should
be now.
* Initial progress on LSP implementation
Libcall is nonviable because the library is immediately freed after a
call is made. Further investigation has shown Language Server Protocol as
a promising alternative that both simplifies the required logic on the
vimscript side and increases the ease with which plugins for other
editors could be made in the future. This is a very large undertaking
and my progress has slowed substantially.
Work is far from being in a usable state, but I wish to keep track of
major refactors for organizational purposes.
* Rewrite audio windowing of guided transcription
One of the defining goals of this venture is allowing consecutive
commands to be rattled off without the existing deadzones of the current
implementation.
* Add unguided_transcription. Cleanup.
The unguided transcription implantation heavily borrows from existing
example implementations and the guided_transcription logic.
A high level pass was done to check that method arguments are accurate
to what inputs are actually required.
A first attempt at cancellation support was added for record keeping,
but will be deleted in a future commit.
* Fix compilation.
Resolves a large number of compilation errors.
No testing has been done yet for execution errors.
Update Makefile and .gitignore
* Functional unguided_transcription
* Functional guided_transcription
Fix commandset_list being passed by value
Properly register the first token of a multitoken command
* Minor changes before time fix
I've apparently made an awfully major mistake in thinking that unix time
was in milliseconds and will be changing all timekeeping code to use
standardized methods.
In preparation for this is a number of minor bugfixes.
Output is manually flushed.
An echo method has been added.
registerCommandset now wraps the returned index
* Swap timekeeping to use std::chrono
* Add work in progress lsp backed whisper.vim plugin
Current progress blockers are
Adding modality awareness to the command processing
(specifically, motion prompting)
Improving the VAD to be a little more responsive
(testing start of activity)
* Reworked vim plugin command loop
* Fix change inside
Multiple bug fixes that, crucially, bring the plugin to the point where a
demonstration video is possible
Add better echo messaging so whisper_log isn't required
Add loading complete message as indicator when listening has started
Insert/append are actually included in command sets
Some more heavy handed corrections to prevent a double exit when leaving
insert mode
As a somewhat hacky fix, the very first space is removed when inserting.
This cleans up most use cases, but leaves me unsatisfied with the few
cases it would be desired.
* Forcibly set commandset_index to 0 after subinsert
Also remove unnecessary ! to use builtin vim command
* Fix upper
A minor scope mistake was causing upper'd inputs to be eaten.
This was fixed and echoing was slightly improved for clarity.
* Fix formatting
Corrects indentation to 4 spaces as project standard
Slightly better error support for malformed json input
* Remove obsolete vim plugin
* Add json.hpp library
The same library that is used for the llama.cpp server
* Minor cleanups
add lsp to the make clean directive.
remove a redundant params definition.
reorder whisper.vim logging for subtranscriptions
Corrections to unlets (variables of argument scope appear immutable)
* Fix indentation. Fallback for subTranscription
Indentation has been changed to 4 spaces.
Unit testing has been set up, I'm opting not to include it in the
repository for now.
It however, has revealed a bug in the state logic where a
subtranscription can be initiated without having a saved command
When this occurs, append is added as a fallback
* Move audio polling logic to a subfunction
While work on the improved vad will continue, It's grown to be a little
out of scope. Instead, a future commit will perform multiple detection
passes at substretches of audio when a backlog of audio exists.
To facilitate this, and prevent code duplication, the vad code has been
moved into a subfunction shared by both the unguided and guided
transcription functions.
* Test for voice over subchunks if backlog > 1s
As the existing VAD implementation only checks for a falling edge at the
end of an audio chunk. It fails to detect voice in cases where the
recorded voice is only at the beginning of the audio.
To ameliorate this, when the timestamp would cause analysis of audio
over a second in length, it is split into 1 second length subchunks
which are individually tested.
Results are promising, but there seems to be a remaining bug with
unguided transcription likely related to saving context
* Limit the maximum length of audio input.
This existing VAD implementation only detects falling edges, which
means any gap in the users speaking is processed for transcription.
This simply establishes a constant maximum length depending on the type
of transcription. Uguided gets a generous 10 seconds and guided, 2.
While quick testing showed that commands are generally around a half a
second to a second, limiting commands to an even second resulted in
extreme degradation of quality. (Seemingly always the same output for a
given commandset)
* Unguided timestamp tracking, cleanup
Unguided transcriptions where not setup to allow for passing of
timestamp data forward, but have been corrected.
No_context is now always set to false. While conceptually desirable for
the quality of guided transcription, It was seemingly responsible for
prior command inputs ghosting in unguided transcription.
Save and Run are now tracked by command number instead of command text.
While command_text was provided for convenience, I wish to keep command
index authoritative. This gives greater consistency and potentially
allows for end users to rename or even translate the spoken versions of
these commands
* By default, maintain mode.
Previously, mode was reset to 0 unless otherwise set.
In addition to causing some edge cases, this was didn't mesh well with
the existing approach to visual mode.
With this change, initial tests indicate visual mode is functional.
* Add undo breaks before subtranscriptions
Subtranscriptions use undo as a hack to allow for partial responses to
be displayed. However, scripts don't cause an undo break mid execution
unless specifically instructed to. This meant that multiple
unguided transcriptions from a single session would cause a latter to
undo a former.
This is now fixed and undo should be reasonably usable as a command.
* Append instead of insert for new undo sequence
When entering and leavening insert mode with `i`, the cursor shifts one
column to the left. This is remedied by using append instead of insert
for setting these breaks in the undo sequence
`-` was also added to the pronunciation dictionary to be pronounced as
minus as it was causing a particularly high failure rate.
* Move undo sequence breaks to command execution
Previously, undo sequence breaks were triggered when there was a command
that caused a move to insert mode. This caused commands that changed
state (like delete or paste) to be bundled together with into the last
command that caused text to be entered.
* Fix repeat. Add space, carrot, dollar commands
Repeat (.) wasn't being tracked properly just like undo and is being
manually tracked now.
While efforts have been made to properly handle spaces, it was
particularly finicky to add a single space when one is needed. A
special 'space' command has been added to insert a single space and move
the cursor after it.
Carrot and Dollar commands have been added for start of line and end of
line respectively. These are both simple to implement, and just a
matter of defining a pronunciation.
* Return error on duplicate in commandset
Not every command in the commandset tokenizes to a single token.
Because of this, it's possible for that two commands could resolve to
the same single token after subsequent tokens are discarded.
This commit adds a simple check for duplicates when a commandset is
registered and returns an error if so.
Additional code will be required later on the vim side to actually
process this error.
* Add support for user-defined commands
This adds a user definable dictionary from spoken keys to strings or
funcrefs. All keys are added to the commandlist and when spoken, trigger
the corresponding function.
Like "save" and "run", these user commands are only available when the
command buffer is empty.
* Add readme, update cmake
* Add area commandset. Refactor spoken_dict
Area commands (inside word, around sentence...) have been given a
commandset as considered earlier.
Verbose definitions for spoken_dict entries now use dicts instead of
lists. This shortens the definition for most keys that require it and
scales better with the addition of further commandsets
* Add mark, jump. Fix change under visual.
Mark (m) and jump (') have been added.
When a visual selection was executed upon a command that initiated a
subtranscription (change) the area of the visual selection is not
properly tracked which causes the attempt to stream in partial response
to fail. This is solved by disabling partial transcriptions from being
streamed when a subtranscription is started while in visual mode.
* Accommodate ignorecase. Fix change.
From testing on older different versions of vim, the test for
distinguishing an 'R' replace all from an 'r' replace could fail if
ignorecase was set. The comparison has been changed to explicitly
require case matching
Change detection has been moved to the execution section as it was missing the
change+motion case.
* Support registers. Fix README typo
There's no logic to prevent doubled register entry, but the functional
result is equivalent to if the same key order was typed into vim.
A minor typo in the readme. I've mismemorized the mnemonic for 't' as 'to'
instead of till., but 'to' can't be used as it's a homophone with '2'.
While there was no mistake in the actual logic, it was misleading to use
'to' in the readme.
2023-08-27 18:35:06 +00:00
|
|
|
// See: https://www.jsonrpc.org/specification
|
|
|
|
json id = body.at("id");
|
|
|
|
try {
|
|
|
|
std::string version = body.at("jsonrpc");
|
|
|
|
if (version != "2.0") {
|
|
|
|
// unsupported version
|
|
|
|
throw json{
|
|
|
|
{"code", -3260},
|
|
|
|
{"message", "invalid jsonrpc version"}
|
|
|
|
};
|
|
|
|
}
|
|
|
|
std::string method = body.at("method");
|
|
|
|
json jparams = json{{"dummy", "dummy"}};
|
|
|
|
if (body.contains("params"))
|
|
|
|
jparams = body.at("params");
|
|
|
|
json res;
|
|
|
|
// TODO: be consistent about argument order
|
|
|
|
fprintf(stderr, "Dispatching a job\n");
|
|
|
|
if (method == "unguided") { res = unguided_transcription(ctx, audio, jparams, params); }
|
|
|
|
else if (method == "guided") { res = guided_transcription(ctx, audio, params, jparams, commandset_list); }
|
|
|
|
else if (method == "seek") { res = seek(ctx, audio, jparams); }
|
|
|
|
else if (method == "registerCommandset") { res = register_commandset(ctx, jparams, commandset_list); }
|
|
|
|
else if (method == "echo") { res = jparams; }
|
|
|
|
|
|
|
|
|
|
|
|
return json{
|
|
|
|
{"jsonrpc", "2.0"},
|
|
|
|
{"result", res},
|
|
|
|
{"id", id}
|
|
|
|
};
|
|
|
|
} catch(json ex) {
|
|
|
|
return json {
|
|
|
|
{"jsonrpc", "2.0"},
|
|
|
|
{"error", ex},
|
|
|
|
{"id", id}
|
|
|
|
};
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2024-06-26 16:34:09 +00:00
|
|
|
static void process_loop(struct whisper_context * ctx, audio_async &audio, const whisper_params ¶ms) {
|
examples : vim plugin and LSP server (#1144)
* Initial proof of concept Vim plugin
At present, this is likely only slightly better than feature parity with
the existing whisper.nvim
Known issues:
Trailing whitespace
Up to an existing length(5 seconds) of speech may be processed when
listening is enabled
CPU cycles are spent processing speech even when not listening.
Fixing these issues is likely dependent upon future efforts to create a
dedicated library instead of wrapping examples/stream
* Support $WHISPER_CPP_HOME environment variable
A minor misunderstanding of the whisper.nvim implementation resulted in
a plugin that was functional, but not a drop in replacement as it should
be now.
* Initial progress on LSP implementation
Libcall is nonviable because the library is immediately freed after a
call is made. Further investigation has shown Language Server Protocol as
a promising alternative that both simplifies the required logic on the
vimscript side and increases the ease with which plugins for other
editors could be made in the future. This is a very large undertaking
and my progress has slowed substantially.
Work is far from being in a usable state, but I wish to keep track of
major refactors for organizational purposes.
* Rewrite audio windowing of guided transcription
One of the defining goals of this venture is allowing consecutive
commands to be rattled off without the existing deadzones of the current
implementation.
* Add unguided_transcription. Cleanup.
The unguided transcription implantation heavily borrows from existing
example implementations and the guided_transcription logic.
A high level pass was done to check that method arguments are accurate
to what inputs are actually required.
A first attempt at cancellation support was added for record keeping,
but will be deleted in a future commit.
* Fix compilation.
Resolves a large number of compilation errors.
No testing has been done yet for execution errors.
Update Makefile and .gitignore
* Functional unguided_transcription
* Functional guided_transcription
Fix commandset_list being passed by value
Properly register the first token of a multitoken command
* Minor changes before time fix
I've apparently made an awfully major mistake in thinking that unix time
was in milliseconds and will be changing all timekeeping code to use
standardized methods.
In preparation for this is a number of minor bugfixes.
Output is manually flushed.
An echo method has been added.
registerCommandset now wraps the returned index
* Swap timekeeping to use std::chrono
* Add work in progress lsp backed whisper.vim plugin
Current progress blockers are
Adding modality awareness to the command processing
(specifically, motion prompting)
Improving the VAD to be a little more responsive
(testing start of activity)
* Reworked vim plugin command loop
* Fix change inside
Multiple bug fixes that, crucially, bring the plugin to the point where a
demonstration video is possible
Add better echo messaging so whisper_log isn't required
Add loading complete message as indicator when listening has started
Insert/append are actually included in command sets
Some more heavy handed corrections to prevent a double exit when leaving
insert mode
As a somewhat hacky fix, the very first space is removed when inserting.
This cleans up most use cases, but leaves me unsatisfied with the few
cases it would be desired.
* Forcibly set commandset_index to 0 after subinsert
Also remove unnecessary ! to use builtin vim command
* Fix upper
A minor scope mistake was causing upper'd inputs to be eaten.
This was fixed and echoing was slightly improved for clarity.
* Fix formatting
Corrects indentation to 4 spaces as project standard
Slightly better error support for malformed json input
* Remove obsolete vim plugin
* Add json.hpp library
The same library that is used for the llama.cpp server
* Minor cleanups
add lsp to the make clean directive.
remove a redundant params definition.
reorder whisper.vim logging for subtranscriptions
Corrections to unlets (variables of argument scope appear immutable)
* Fix indentation. Fallback for subTranscription
Indentation has been changed to 4 spaces.
Unit testing has been set up, I'm opting not to include it in the
repository for now.
It however, has revealed a bug in the state logic where a
subtranscription can be initiated without having a saved command
When this occurs, append is added as a fallback
* Move audio polling logic to a subfunction
While work on the improved vad will continue, It's grown to be a little
out of scope. Instead, a future commit will perform multiple detection
passes at substretches of audio when a backlog of audio exists.
To facilitate this, and prevent code duplication, the vad code has been
moved into a subfunction shared by both the unguided and guided
transcription functions.
* Test for voice over subchunks if backlog > 1s
As the existing VAD implementation only checks for a falling edge at the
end of an audio chunk. It fails to detect voice in cases where the
recorded voice is only at the beginning of the audio.
To ameliorate this, when the timestamp would cause analysis of audio
over a second in length, it is split into 1 second length subchunks
which are individually tested.
Results are promising, but there seems to be a remaining bug with
unguided transcription likely related to saving context
* Limit the maximum length of audio input.
This existing VAD implementation only detects falling edges, which
means any gap in the users speaking is processed for transcription.
This simply establishes a constant maximum length depending on the type
of transcription. Uguided gets a generous 10 seconds and guided, 2.
While quick testing showed that commands are generally around a half a
second to a second, limiting commands to an even second resulted in
extreme degradation of quality. (Seemingly always the same output for a
given commandset)
* Unguided timestamp tracking, cleanup
Unguided transcriptions where not setup to allow for passing of
timestamp data forward, but have been corrected.
No_context is now always set to false. While conceptually desirable for
the quality of guided transcription, It was seemingly responsible for
prior command inputs ghosting in unguided transcription.
Save and Run are now tracked by command number instead of command text.
While command_text was provided for convenience, I wish to keep command
index authoritative. This gives greater consistency and potentially
allows for end users to rename or even translate the spoken versions of
these commands
* By default, maintain mode.
Previously, mode was reset to 0 unless otherwise set.
In addition to causing some edge cases, this was didn't mesh well with
the existing approach to visual mode.
With this change, initial tests indicate visual mode is functional.
* Add undo breaks before subtranscriptions
Subtranscriptions use undo as a hack to allow for partial responses to
be displayed. However, scripts don't cause an undo break mid execution
unless specifically instructed to. This meant that multiple
unguided transcriptions from a single session would cause a latter to
undo a former.
This is now fixed and undo should be reasonably usable as a command.
* Append instead of insert for new undo sequence
When entering and leavening insert mode with `i`, the cursor shifts one
column to the left. This is remedied by using append instead of insert
for setting these breaks in the undo sequence
`-` was also added to the pronunciation dictionary to be pronounced as
minus as it was causing a particularly high failure rate.
* Move undo sequence breaks to command execution
Previously, undo sequence breaks were triggered when there was a command
that caused a move to insert mode. This caused commands that changed
state (like delete or paste) to be bundled together with into the last
command that caused text to be entered.
* Fix repeat. Add space, carrot, dollar commands
Repeat (.) wasn't being tracked properly just like undo and is being
manually tracked now.
While efforts have been made to properly handle spaces, it was
particularly finicky to add a single space when one is needed. A
special 'space' command has been added to insert a single space and move
the cursor after it.
Carrot and Dollar commands have been added for start of line and end of
line respectively. These are both simple to implement, and just a
matter of defining a pronunciation.
* Return error on duplicate in commandset
Not every command in the commandset tokenizes to a single token.
Because of this, it's possible for that two commands could resolve to
the same single token after subsequent tokens are discarded.
This commit adds a simple check for duplicates when a commandset is
registered and returns an error if so.
Additional code will be required later on the vim side to actually
process this error.
* Add support for user-defined commands
This adds a user definable dictionary from spoken keys to strings or
funcrefs. All keys are added to the commandlist and when spoken, trigger
the corresponding function.
Like "save" and "run", these user commands are only available when the
command buffer is empty.
* Add readme, update cmake
* Add area commandset. Refactor spoken_dict
Area commands (inside word, around sentence...) have been given a
commandset as considered earlier.
Verbose definitions for spoken_dict entries now use dicts instead of
lists. This shortens the definition for most keys that require it and
scales better with the addition of further commandsets
* Add mark, jump. Fix change under visual.
Mark (m) and jump (') have been added.
When a visual selection was executed upon a command that initiated a
subtranscription (change) the area of the visual selection is not
properly tracked which causes the attempt to stream in partial response
to fail. This is solved by disabling partial transcriptions from being
streamed when a subtranscription is started while in visual mode.
* Accommodate ignorecase. Fix change.
From testing on older different versions of vim, the test for
distinguishing an 'R' replace all from an 'r' replace could fail if
ignorecase was set. The comparison has been changed to explicitly
require case matching
Change detection has been moved to the execution section as it was missing the
change+motion case.
* Support registers. Fix README typo
There's no logic to prevent doubled register entry, but the functional
result is equivalent to if the same key order was typed into vim.
A minor typo in the readme. I've mismemorized the mnemonic for 't' as 'to'
instead of till., but 'to' can't be used as it's a homophone with '2'.
While there was no mistake in the actual logic, it was misleading to use
'to' in the readme.
2023-08-27 18:35:06 +00:00
|
|
|
std::deque<json> jobqueue;
|
|
|
|
std::vector<struct commandset> commandset_list;
|
|
|
|
while (true) {
|
|
|
|
// For eventual cancellation support, shouldn't block if job exists
|
|
|
|
if (std::cin.rdbuf()->in_avail() > 22 || jobqueue.size() == 0) {
|
|
|
|
int content_length;
|
|
|
|
if (scanf("Content-Length: %d", &content_length) != 1) {
|
|
|
|
fprintf(stderr, "Could not read input: %d", std::cin.peek());
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
// scanf leaves the new lines intact
|
|
|
|
std::cin.ignore(2);
|
|
|
|
if (std::cin.peek() != 13) {
|
|
|
|
// Content-Type. jsonrpc necessitates utf8.
|
|
|
|
std::cin.ignore(200,10);
|
|
|
|
}
|
|
|
|
std::cin.ignore(2);
|
|
|
|
// A message is being sent and blocking is acceptable
|
|
|
|
std::string content(content_length,'\0');
|
|
|
|
std::cin.read(&content[0], content_length);
|
|
|
|
json job = json::parse(content);
|
|
|
|
// TODO: Some messages(cancellation) should skip queue here
|
|
|
|
if (job.is_array()) {
|
|
|
|
// response must also be batched. Will implement later
|
|
|
|
// for (subjob : job.begin())
|
|
|
|
// TODO: At the very least respond with an unsupported error.
|
|
|
|
} else {
|
|
|
|
jobqueue.push_back(job);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
assert(jobqueue.size() > 0);
|
|
|
|
json job = jobqueue.front();
|
|
|
|
json resp = parse_job(job, ctx, audio, params, commandset_list);
|
|
|
|
if (resp != "unfinished") {
|
|
|
|
jobqueue.pop_front();
|
|
|
|
// send response
|
|
|
|
std::string data = resp.dump(-1, ' ', false, json::error_handler_t::replace);
|
2023-09-07 09:33:12 +00:00
|
|
|
fprintf(stdout, "Content-Length: %d\r\n\r\n%s\n", (int)data.length()+1, data.c_str());
|
examples : vim plugin and LSP server (#1144)
* Initial proof of concept Vim plugin
At present, this is likely only slightly better than feature parity with
the existing whisper.nvim
Known issues:
Trailing whitespace
Up to an existing length(5 seconds) of speech may be processed when
listening is enabled
CPU cycles are spent processing speech even when not listening.
Fixing these issues is likely dependent upon future efforts to create a
dedicated library instead of wrapping examples/stream
* Support $WHISPER_CPP_HOME environment variable
A minor misunderstanding of the whisper.nvim implementation resulted in
a plugin that was functional, but not a drop in replacement as it should
be now.
* Initial progress on LSP implementation
Libcall is nonviable because the library is immediately freed after a
call is made. Further investigation has shown Language Server Protocol as
a promising alternative that both simplifies the required logic on the
vimscript side and increases the ease with which plugins for other
editors could be made in the future. This is a very large undertaking
and my progress has slowed substantially.
Work is far from being in a usable state, but I wish to keep track of
major refactors for organizational purposes.
* Rewrite audio windowing of guided transcription
One of the defining goals of this venture is allowing consecutive
commands to be rattled off without the existing deadzones of the current
implementation.
* Add unguided_transcription. Cleanup.
The unguided transcription implantation heavily borrows from existing
example implementations and the guided_transcription logic.
A high level pass was done to check that method arguments are accurate
to what inputs are actually required.
A first attempt at cancellation support was added for record keeping,
but will be deleted in a future commit.
* Fix compilation.
Resolves a large number of compilation errors.
No testing has been done yet for execution errors.
Update Makefile and .gitignore
* Functional unguided_transcription
* Functional guided_transcription
Fix commandset_list being passed by value
Properly register the first token of a multitoken command
* Minor changes before time fix
I've apparently made an awfully major mistake in thinking that unix time
was in milliseconds and will be changing all timekeeping code to use
standardized methods.
In preparation for this is a number of minor bugfixes.
Output is manually flushed.
An echo method has been added.
registerCommandset now wraps the returned index
* Swap timekeeping to use std::chrono
* Add work in progress lsp backed whisper.vim plugin
Current progress blockers are
Adding modality awareness to the command processing
(specifically, motion prompting)
Improving the VAD to be a little more responsive
(testing start of activity)
* Reworked vim plugin command loop
* Fix change inside
Multiple bug fixes that, crucially, bring the plugin to the point where a
demonstration video is possible
Add better echo messaging so whisper_log isn't required
Add loading complete message as indicator when listening has started
Insert/append are actually included in command sets
Some more heavy handed corrections to prevent a double exit when leaving
insert mode
As a somewhat hacky fix, the very first space is removed when inserting.
This cleans up most use cases, but leaves me unsatisfied with the few
cases it would be desired.
* Forcibly set commandset_index to 0 after subinsert
Also remove unnecessary ! to use builtin vim command
* Fix upper
A minor scope mistake was causing upper'd inputs to be eaten.
This was fixed and echoing was slightly improved for clarity.
* Fix formatting
Corrects indentation to 4 spaces as project standard
Slightly better error support for malformed json input
* Remove obsolete vim plugin
* Add json.hpp library
The same library that is used for the llama.cpp server
* Minor cleanups
add lsp to the make clean directive.
remove a redundant params definition.
reorder whisper.vim logging for subtranscriptions
Corrections to unlets (variables of argument scope appear immutable)
* Fix indentation. Fallback for subTranscription
Indentation has been changed to 4 spaces.
Unit testing has been set up, I'm opting not to include it in the
repository for now.
It however, has revealed a bug in the state logic where a
subtranscription can be initiated without having a saved command
When this occurs, append is added as a fallback
* Move audio polling logic to a subfunction
While work on the improved vad will continue, It's grown to be a little
out of scope. Instead, a future commit will perform multiple detection
passes at substretches of audio when a backlog of audio exists.
To facilitate this, and prevent code duplication, the vad code has been
moved into a subfunction shared by both the unguided and guided
transcription functions.
* Test for voice over subchunks if backlog > 1s
As the existing VAD implementation only checks for a falling edge at the
end of an audio chunk. It fails to detect voice in cases where the
recorded voice is only at the beginning of the audio.
To ameliorate this, when the timestamp would cause analysis of audio
over a second in length, it is split into 1 second length subchunks
which are individually tested.
Results are promising, but there seems to be a remaining bug with
unguided transcription likely related to saving context
* Limit the maximum length of audio input.
This existing VAD implementation only detects falling edges, which
means any gap in the users speaking is processed for transcription.
This simply establishes a constant maximum length depending on the type
of transcription. Uguided gets a generous 10 seconds and guided, 2.
While quick testing showed that commands are generally around a half a
second to a second, limiting commands to an even second resulted in
extreme degradation of quality. (Seemingly always the same output for a
given commandset)
* Unguided timestamp tracking, cleanup
Unguided transcriptions where not setup to allow for passing of
timestamp data forward, but have been corrected.
No_context is now always set to false. While conceptually desirable for
the quality of guided transcription, It was seemingly responsible for
prior command inputs ghosting in unguided transcription.
Save and Run are now tracked by command number instead of command text.
While command_text was provided for convenience, I wish to keep command
index authoritative. This gives greater consistency and potentially
allows for end users to rename or even translate the spoken versions of
these commands
* By default, maintain mode.
Previously, mode was reset to 0 unless otherwise set.
In addition to causing some edge cases, this was didn't mesh well with
the existing approach to visual mode.
With this change, initial tests indicate visual mode is functional.
* Add undo breaks before subtranscriptions
Subtranscriptions use undo as a hack to allow for partial responses to
be displayed. However, scripts don't cause an undo break mid execution
unless specifically instructed to. This meant that multiple
unguided transcriptions from a single session would cause a latter to
undo a former.
This is now fixed and undo should be reasonably usable as a command.
* Append instead of insert for new undo sequence
When entering and leavening insert mode with `i`, the cursor shifts one
column to the left. This is remedied by using append instead of insert
for setting these breaks in the undo sequence
`-` was also added to the pronunciation dictionary to be pronounced as
minus as it was causing a particularly high failure rate.
* Move undo sequence breaks to command execution
Previously, undo sequence breaks were triggered when there was a command
that caused a move to insert mode. This caused commands that changed
state (like delete or paste) to be bundled together with into the last
command that caused text to be entered.
* Fix repeat. Add space, carrot, dollar commands
Repeat (.) wasn't being tracked properly just like undo and is being
manually tracked now.
While efforts have been made to properly handle spaces, it was
particularly finicky to add a single space when one is needed. A
special 'space' command has been added to insert a single space and move
the cursor after it.
Carrot and Dollar commands have been added for start of line and end of
line respectively. These are both simple to implement, and just a
matter of defining a pronunciation.
* Return error on duplicate in commandset
Not every command in the commandset tokenizes to a single token.
Because of this, it's possible for that two commands could resolve to
the same single token after subsequent tokens are discarded.
This commit adds a simple check for duplicates when a commandset is
registered and returns an error if so.
Additional code will be required later on the vim side to actually
process this error.
* Add support for user-defined commands
This adds a user definable dictionary from spoken keys to strings or
funcrefs. All keys are added to the commandlist and when spoken, trigger
the corresponding function.
Like "save" and "run", these user commands are only available when the
command buffer is empty.
* Add readme, update cmake
* Add area commandset. Refactor spoken_dict
Area commands (inside word, around sentence...) have been given a
commandset as considered earlier.
Verbose definitions for spoken_dict entries now use dicts instead of
lists. This shortens the definition for most keys that require it and
scales better with the addition of further commandsets
* Add mark, jump. Fix change under visual.
Mark (m) and jump (') have been added.
When a visual selection was executed upon a command that initiated a
subtranscription (change) the area of the visual selection is not
properly tracked which causes the attempt to stream in partial response
to fail. This is solved by disabling partial transcriptions from being
streamed when a subtranscription is started while in visual mode.
* Accommodate ignorecase. Fix change.
From testing on older different versions of vim, the test for
distinguishing an 'R' replace all from an 'r' replace could fail if
ignorecase was set. The comparison has been changed to explicitly
require case matching
Change detection has been moved to the execution section as it was missing the
change+motion case.
* Support registers. Fix README typo
There's no logic to prevent doubled register entry, but the functional
result is equivalent to if the same key order was typed into vim.
A minor typo in the readme. I've mismemorized the mnemonic for 't' as 'to'
instead of till., but 'to' can't be used as it's a homophone with '2'.
While there was no mistake in the actual logic, it was misleading to use
'to' in the readme.
2023-08-27 18:35:06 +00:00
|
|
|
std::cout.flush();
|
|
|
|
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
int main(int argc, char ** argv) {
|
|
|
|
whisper_params params;
|
|
|
|
if (whisper_params_parse(argc, argv, params) == false) {
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (whisper_lang_id(params.language.c_str()) == -1) {
|
|
|
|
fprintf(stderr, "error: unknown language '%s'\n", params.language.c_str());
|
|
|
|
whisper_print_usage(argc, argv, params);
|
|
|
|
exit(0);
|
|
|
|
}
|
|
|
|
|
|
|
|
// whisper init
|
2024-02-11 14:39:12 +00:00
|
|
|
struct whisper_context_params cparams = whisper_context_default_params();
|
2024-05-15 06:38:19 +00:00
|
|
|
|
|
|
|
cparams.use_gpu = params.use_gpu;
|
|
|
|
cparams.flash_attn = params.flash_attn;
|
|
|
|
|
2023-11-06 09:04:24 +00:00
|
|
|
struct whisper_context * ctx = whisper_init_from_file_with_params(params.model.c_str(), cparams);
|
examples : vim plugin and LSP server (#1144)
* Initial proof of concept Vim plugin
At present, this is likely only slightly better than feature parity with
the existing whisper.nvim
Known issues:
Trailing whitespace
Up to an existing length(5 seconds) of speech may be processed when
listening is enabled
CPU cycles are spent processing speech even when not listening.
Fixing these issues is likely dependent upon future efforts to create a
dedicated library instead of wrapping examples/stream
* Support $WHISPER_CPP_HOME environment variable
A minor misunderstanding of the whisper.nvim implementation resulted in
a plugin that was functional, but not a drop in replacement as it should
be now.
* Initial progress on LSP implementation
Libcall is nonviable because the library is immediately freed after a
call is made. Further investigation has shown Language Server Protocol as
a promising alternative that both simplifies the required logic on the
vimscript side and increases the ease with which plugins for other
editors could be made in the future. This is a very large undertaking
and my progress has slowed substantially.
Work is far from being in a usable state, but I wish to keep track of
major refactors for organizational purposes.
* Rewrite audio windowing of guided transcription
One of the defining goals of this venture is allowing consecutive
commands to be rattled off without the existing deadzones of the current
implementation.
* Add unguided_transcription. Cleanup.
The unguided transcription implantation heavily borrows from existing
example implementations and the guided_transcription logic.
A high level pass was done to check that method arguments are accurate
to what inputs are actually required.
A first attempt at cancellation support was added for record keeping,
but will be deleted in a future commit.
* Fix compilation.
Resolves a large number of compilation errors.
No testing has been done yet for execution errors.
Update Makefile and .gitignore
* Functional unguided_transcription
* Functional guided_transcription
Fix commandset_list being passed by value
Properly register the first token of a multitoken command
* Minor changes before time fix
I've apparently made an awfully major mistake in thinking that unix time
was in milliseconds and will be changing all timekeeping code to use
standardized methods.
In preparation for this is a number of minor bugfixes.
Output is manually flushed.
An echo method has been added.
registerCommandset now wraps the returned index
* Swap timekeeping to use std::chrono
* Add work in progress lsp backed whisper.vim plugin
Current progress blockers are
Adding modality awareness to the command processing
(specifically, motion prompting)
Improving the VAD to be a little more responsive
(testing start of activity)
* Reworked vim plugin command loop
* Fix change inside
Multiple bug fixes that, crucially, bring the plugin to the point where a
demonstration video is possible
Add better echo messaging so whisper_log isn't required
Add loading complete message as indicator when listening has started
Insert/append are actually included in command sets
Some more heavy handed corrections to prevent a double exit when leaving
insert mode
As a somewhat hacky fix, the very first space is removed when inserting.
This cleans up most use cases, but leaves me unsatisfied with the few
cases it would be desired.
* Forcibly set commandset_index to 0 after subinsert
Also remove unnecessary ! to use builtin vim command
* Fix upper
A minor scope mistake was causing upper'd inputs to be eaten.
This was fixed and echoing was slightly improved for clarity.
* Fix formatting
Corrects indentation to 4 spaces as project standard
Slightly better error support for malformed json input
* Remove obsolete vim plugin
* Add json.hpp library
The same library that is used for the llama.cpp server
* Minor cleanups
add lsp to the make clean directive.
remove a redundant params definition.
reorder whisper.vim logging for subtranscriptions
Corrections to unlets (variables of argument scope appear immutable)
* Fix indentation. Fallback for subTranscription
Indentation has been changed to 4 spaces.
Unit testing has been set up, I'm opting not to include it in the
repository for now.
It however, has revealed a bug in the state logic where a
subtranscription can be initiated without having a saved command
When this occurs, append is added as a fallback
* Move audio polling logic to a subfunction
While work on the improved vad will continue, It's grown to be a little
out of scope. Instead, a future commit will perform multiple detection
passes at substretches of audio when a backlog of audio exists.
To facilitate this, and prevent code duplication, the vad code has been
moved into a subfunction shared by both the unguided and guided
transcription functions.
* Test for voice over subchunks if backlog > 1s
As the existing VAD implementation only checks for a falling edge at the
end of an audio chunk. It fails to detect voice in cases where the
recorded voice is only at the beginning of the audio.
To ameliorate this, when the timestamp would cause analysis of audio
over a second in length, it is split into 1 second length subchunks
which are individually tested.
Results are promising, but there seems to be a remaining bug with
unguided transcription likely related to saving context
* Limit the maximum length of audio input.
This existing VAD implementation only detects falling edges, which
means any gap in the users speaking is processed for transcription.
This simply establishes a constant maximum length depending on the type
of transcription. Uguided gets a generous 10 seconds and guided, 2.
While quick testing showed that commands are generally around a half a
second to a second, limiting commands to an even second resulted in
extreme degradation of quality. (Seemingly always the same output for a
given commandset)
* Unguided timestamp tracking, cleanup
Unguided transcriptions where not setup to allow for passing of
timestamp data forward, but have been corrected.
No_context is now always set to false. While conceptually desirable for
the quality of guided transcription, It was seemingly responsible for
prior command inputs ghosting in unguided transcription.
Save and Run are now tracked by command number instead of command text.
While command_text was provided for convenience, I wish to keep command
index authoritative. This gives greater consistency and potentially
allows for end users to rename or even translate the spoken versions of
these commands
* By default, maintain mode.
Previously, mode was reset to 0 unless otherwise set.
In addition to causing some edge cases, this was didn't mesh well with
the existing approach to visual mode.
With this change, initial tests indicate visual mode is functional.
* Add undo breaks before subtranscriptions
Subtranscriptions use undo as a hack to allow for partial responses to
be displayed. However, scripts don't cause an undo break mid execution
unless specifically instructed to. This meant that multiple
unguided transcriptions from a single session would cause a latter to
undo a former.
This is now fixed and undo should be reasonably usable as a command.
* Append instead of insert for new undo sequence
When entering and leavening insert mode with `i`, the cursor shifts one
column to the left. This is remedied by using append instead of insert
for setting these breaks in the undo sequence
`-` was also added to the pronunciation dictionary to be pronounced as
minus as it was causing a particularly high failure rate.
* Move undo sequence breaks to command execution
Previously, undo sequence breaks were triggered when there was a command
that caused a move to insert mode. This caused commands that changed
state (like delete or paste) to be bundled together with into the last
command that caused text to be entered.
* Fix repeat. Add space, carrot, dollar commands
Repeat (.) wasn't being tracked properly just like undo and is being
manually tracked now.
While efforts have been made to properly handle spaces, it was
particularly finicky to add a single space when one is needed. A
special 'space' command has been added to insert a single space and move
the cursor after it.
Carrot and Dollar commands have been added for start of line and end of
line respectively. These are both simple to implement, and just a
matter of defining a pronunciation.
* Return error on duplicate in commandset
Not every command in the commandset tokenizes to a single token.
Because of this, it's possible for that two commands could resolve to
the same single token after subsequent tokens are discarded.
This commit adds a simple check for duplicates when a commandset is
registered and returns an error if so.
Additional code will be required later on the vim side to actually
process this error.
* Add support for user-defined commands
This adds a user definable dictionary from spoken keys to strings or
funcrefs. All keys are added to the commandlist and when spoken, trigger
the corresponding function.
Like "save" and "run", these user commands are only available when the
command buffer is empty.
* Add readme, update cmake
* Add area commandset. Refactor spoken_dict
Area commands (inside word, around sentence...) have been given a
commandset as considered earlier.
Verbose definitions for spoken_dict entries now use dicts instead of
lists. This shortens the definition for most keys that require it and
scales better with the addition of further commandsets
* Add mark, jump. Fix change under visual.
Mark (m) and jump (') have been added.
When a visual selection was executed upon a command that initiated a
subtranscription (change) the area of the visual selection is not
properly tracked which causes the attempt to stream in partial response
to fail. This is solved by disabling partial transcriptions from being
streamed when a subtranscription is started while in visual mode.
* Accommodate ignorecase. Fix change.
From testing on older different versions of vim, the test for
distinguishing an 'R' replace all from an 'r' replace could fail if
ignorecase was set. The comparison has been changed to explicitly
require case matching
Change detection has been moved to the execution section as it was missing the
change+motion case.
* Support registers. Fix README typo
There's no logic to prevent doubled register entry, but the functional
result is equivalent to if the same key order was typed into vim.
A minor typo in the readme. I've mismemorized the mnemonic for 't' as 'to'
instead of till., but 'to' can't be used as it's a homophone with '2'.
While there was no mistake in the actual logic, it was misleading to use
'to' in the readme.
2023-08-27 18:35:06 +00:00
|
|
|
// init audio
|
|
|
|
|
|
|
|
audio_async audio(30*1000);
|
|
|
|
if (!audio.init(params.capture_id, WHISPER_SAMPLE_RATE)) {
|
|
|
|
fprintf(stderr, "%s: audio.init() failed!\n", __func__);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
audio.resume();
|
|
|
|
// TODO: Investigate why this is required. An extra second of startup latency is not great
|
|
|
|
// wait for 1 second to avoid any buffered noise
|
|
|
|
std::this_thread::sleep_for(std::chrono::milliseconds(1000));
|
|
|
|
audio.clear();
|
|
|
|
// TODO: consider some sort of indicator to designate loading has finished?
|
|
|
|
// Potentially better for the client to just start with a non-blocking message (register commands)
|
|
|
|
process_loop(ctx, audio, params);
|
|
|
|
|
|
|
|
audio.pause();
|
|
|
|
whisper_print_timings(ctx);
|
|
|
|
whisper_free(ctx);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|