trick/trick_source/trick_utils/units/test/UnitTestSuite.cpp

#include <gtest/gtest.h>
#include "trick/Unit.hh"
#include <math.h>
//#include "trick_utils/reqs/include/RequirementScribe.hh"

/*********************FIXME**********************************************************************************
 * 1. The behavior of the conversion between composite units containing
 * temperature (an offest) is defined arbitrarily in the source code, namely, that conversion
 * between units of temperature occurs first within a product containing
 * temperature, and the offset of the temperature conversion is ignored
 * within a ratio containing temperature.
 * This presents a problem for a user who wants to use a behavior which differs
 * from that described above. Realisitically, the impact of this
 * problem is minimal since the use of temperature in composite units rarely occurs
 * in application.
 *
 * 2. The use of Unit::CONVERSION_ERROR as the only exception for unit is misleading.
 * Unit::CONVERSION_ERROR is thrown during invalid unit conversions, but also when
 * initializing invalid units. Possible solutions include a broader reaching name
 * or the inclusion of another exception.
 *
 * 3. The use of multiplication in denominator of a ratio violates order of operations
 * kg*m/s*s = kg*m/s/s. It is misleading since multiplication seems to equate to division.
 * A possible solution would be to allow the multiplication in the denominator within parentheses.
 *
 * 4. Within the units_conv.c file in the table of units and conversion factors at line 463
 *    The conversion of ounces to newtons is given as 0.27801385. This conversion can be obtained with more
 *    precision by using the conversion from pound(force) to Newton and dividing by 16. That is the conversion
 *    of ounces to newtons can be written as 4.4482216152605/16 = 0.27801385095378. Note
 *    that only 14 significant figures are given in 4.4482216152605 and only 14 are used in the result.
 *    After revision of the conversion rate, the tolerance used in the test (around line 348) can
 *    be lowered to reflect the increase in precision.
 *
 * 5. Within the units_conv.c file at line 428 the conversion rate of arcseconds to radians is given as 4.848136811095362e-6
 *    The conversion rate should be pi/(180*60*60). When doing this division with 20 digits of pi, then the result
 *    is 4.8481368110953599...e-6. To double floating point precision that is 4.848136811095360e-6. After correction,
 *    then the tolerance can be lowered to reflect the increase in precision.
 *
 * --Taylor Dowlen
* **********************************************************************************************************/


#define TOL 1e-7
#define PI 3.14159265358979323846

namespace Trick {

double tolerance(int exp)
{
  return pow(10, exp);
}

/*********************WARNING******************************************
 * 1. Conversion_to allocates memory for a UCFn object using new
 * Use clean_up_UCFn() to deallocate the memory and set the pointer to NULL
 *
 * 2. Do not call clean_up_UCFn() on unitialized pointers!
 * Initialize/Define pointers at declaration
 * Declared pointers that don't point to a valid address or NULL will
 * cause an error
**********************************************************************/

#if 0
void units_requirements(bool isThrow) {
  Trick::RequirementScribe req;

  if (isThrow) {
    req.add_requirement("3321868560");
  } else {
      req.add_requirement("1724238641");
  }

}
#endif

void clean_up_UCFn(UCFn** ptr)
{
  if(*ptr != (UCFn*) NULL)
  {
      delete *ptr;
  }
  else
  {
    std::cerr << "WARNING: Call to clean_up_UCFn() on a NULL pointer" << std::endl
              << "Calling function should check for non-NULL value of pointer" << std::endl
              << "before calling clean_up_UCFn()" << std::endl;
  }
  *ptr = (UCFn*) NULL;
}

void test_conversion_no_throw(std::string unitString1, std::string unitString2, double expected_offset, double expected_scale, double tolerance = TOL)
{
  ASSERT_NO_THROW(Unit unit1(unitString1.c_str()));
  ASSERT_NO_THROW(Unit unit2(unitString2.c_str()));

  Unit unit1(unitString1.c_str());
  Unit unit2(unitString2.c_str());
  UCFn *cf = (UCFn*) NULL;

  ASSERT_NO_THROW(cf = unit1.Conversion_to(&unit2));

  EXPECT_NEAR(expected_offset, cf->C[0], tolerance );
  EXPECT_NEAR(expected_scale,  cf->C[1], tolerance );

  clean_up_UCFn(&cf);
  ASSERT_EQ((UCFn*) NULL, cf);

  //units_requirements(false);

}

void test_conversion_no_expect(std::string unitString1, std::string unitString2)
{
  ASSERT_NO_THROW(Unit unit1(unitString1.c_str()));
  ASSERT_NO_THROW(Unit unit2(unitString2.c_str()));

  Unit unit1(unitString1.c_str());
  Unit unit2(unitString2.c_str());
  UCFn *cf = (UCFn*) NULL;

  ASSERT_NO_THROW(cf = unit1.Conversion_to(&unit2));

  clean_up_UCFn(&cf);
  ASSERT_EQ((UCFn*) NULL, cf);
}

void test_temperature_conversion(std::string unitString,
                             double temperature,
                             double expected_Celsius = 0.0,
                             double expected_Kelvin = 0.0,
                             double expected_Fahrenheit = 0.0,
                             double expected_Rankine = 0.0,
                             double tolerance = TOL)
{
  ASSERT_NO_THROW(Unit unit(unitString.c_str()));

  Unit unit(unitString.c_str());

  double temp_Celsius = unit.Convert_to(temperature, "C");
  double temp_Fahrenheit = unit.Convert_to(temperature, "F");
  double temp_Kelvin = unit.Convert_to(temperature, "K");
  double temp_Rankine = unit.Convert_to(temperature, "R");

  EXPECT_NEAR(expected_Celsius, temp_Celsius, tolerance);
  EXPECT_NEAR(expected_Fahrenheit, temp_Fahrenheit, tolerance);
  EXPECT_NEAR(expected_Kelvin, temp_Kelvin, tolerance);
  EXPECT_NEAR(expected_Rankine, temp_Rankine, tolerance);
}

void test_conversion_throw(std::string unitString1, std::string unitString2)
{
  ASSERT_NO_THROW(Unit unit1(unitString1.c_str()));
  ASSERT_NO_THROW(Unit unit2(unitString2.c_str()));

  Unit unit1(unitString1.c_str());
  Unit unit2(unitString2.c_str());
  UCFn* cf = (UCFn*) NULL;

  std::cerr << "The purpose of this test is to throw to an exception. Error messages are expected." << std::endl;

  ASSERT_THROW(cf = unit1.Conversion_to(&unit2), Unit::CONVERSION_ERROR);

  if(cf!= (UCFn*) NULL)
  {
    clean_up_UCFn(&cf);
  }
  ASSERT_EQ((UCFn*) NULL, cf);

  //units_requirements(true);
}

class UnitConversion : public ::testing::Test {

    protected:
        //Trick::RequirementScribe testReq;

        UnitConversion() {}
        ~UnitConversion() {}
        virtual void SetUp() {}
        virtual void TearDown() {}

};

// Time Conversions
TEST_F(UnitConversion, SecondToSecond)
{
  test_conversion_no_throw("s", "s", 0.0, 1.0, TOL);
}

TEST_F(UnitConversion, SecondToMinute)
{
  test_conversion_no_throw("s", "min", 0.0, (1.0/60.0), TOL);
}

TEST_F(UnitConversion, SecondToHour)
{
  test_conversion_no_throw("s", "hr", 0.0, (1.0/(60.0*60.0)), TOL);
}

TEST_F(UnitConversion, SecondToDay)
{
  test_conversion_no_throw("s", "day", 0.0, (1.0/(60.0*60.0*24.0)), TOL);
}

TEST_F(UnitConversion, MinuteToSecond)
{
  test_conversion_no_throw("min", "s", 0.0, 60.0, TOL);
}

TEST_F(UnitConversion, HourToSecond)
{
  test_conversion_no_throw("hr", "s", 0.0, (60.0*60.0), TOL);
}

TEST_F(UnitConversion, DayToSecond)
{
  test_conversion_no_throw("day", "s", 0.0, (60.0*60.0*24.0), TOL);
}

//Length Conversion

TEST_F(UnitConversion, MeterToMeter)
{
  test_conversion_no_throw("m", "m", 0.0, 1.0, TOL);
}

TEST_F(UnitConversion, MeterToFeet)
{
  test_conversion_no_throw("m", "ft", 0.0, (1.0/0.3048), TOL);
}

TEST_F(UnitConversion, MeterToInch)
{
  test_conversion_no_throw("m", "in", 0.0, (12.0/0.3048), TOL);
}


TEST_F(UnitConversion, MeterToMilli)
{
  test_conversion_no_throw("m", "mm", 0.0, 1000.0, TOL);
}

TEST_F(UnitConversion, MeterToCenti)
{
  test_conversion_no_throw("m", "cm", 0.0, 100.0, TOL);
}

TEST_F(UnitConversion, MeterToKilometer)
{
  test_conversion_no_throw("m", "km", 0.0, (1.0/1000.0), TOL);
}

TEST_F(UnitConversion, MeterToYard)
{
  test_conversion_no_throw("m", "yd", 0.0, (1.0/(0.3048*3.0)), TOL);
}

TEST_F(UnitConversion, MeterToMile)
{
  test_conversion_no_throw("m", "mi", 0.0, (1.0/(0.3048*5280.0)), TOL);
}

TEST_F(UnitConversion, MeterToNautMile)
{
  test_conversion_no_throw("m", "n.m.", 0.0, (1.0/1852.0), TOL);
}

TEST_F(UnitConversion, MeterToKilofoot)
{
  test_conversion_no_throw("m", "kft", 0.0, (1.0/(1000.0*0.3048)), TOL);
}


TEST_F(UnitConversion, FootToInch)
{
  test_conversion_no_throw("ft", "in", 0.0, 12.0, TOL);
}

TEST_F(UnitConversion, YardToFoot)
{
  test_conversion_no_throw("yd", "ft", 0.0, 3.0, TOL);
}

TEST_F(UnitConversion, YardToInch)
{
  test_conversion_no_throw("yd", "in", 0.0, (3.0*12.0), TOL);
}

TEST_F(UnitConversion, MileToFeet)
{
  test_conversion_no_throw("mi", "ft", 0.0, 5280.0, TOL);
}


TEST_F(UnitConversion, NautMileToFeet)
{
  test_conversion_no_throw("n.m.", "ft", 0.0, (1852.0/0.3048), TOL);
}

TEST_F(UnitConversion, KilofootToFeet)
{
  test_conversion_no_throw("kft", "ft", 0.0, 1000.0, TOL);
}

//Angle Conversion

TEST_F(UnitConversion, RadToRad)
{
  test_conversion_no_throw("r", "r", 0.0, 1.0, TOL);
}

TEST_F(UnitConversion, RadToDeg)
{
  test_conversion_no_throw("r", "d", 0.0, (180.0/PI), TOL);
}

TEST_F(UnitConversion, RadToArcSec)
{
  test_conversion_no_throw("r", "as", 0.0, (180.0*60.0*60.0/PI), tolerance(-9));
}

TEST_F(UnitConversion, RadToArcMin)
{
  test_conversion_no_throw("r", "am", 0.0, (180.0*60.0/PI), TOL);
}

TEST_F(UnitConversion, RadToRev)
{
  test_conversion_no_throw("r", "rev", 0.0, (1.0/(2.0*PI)), TOL);
}

TEST_F(UnitConversion, RadToMilliRad)
{
  test_conversion_no_throw("r", "mr", 0.0, 1000.0, TOL);
}

TEST_F(UnitConversion, RevToDeg)
{
  test_conversion_no_throw("rev", "d", 0.0, 360.0, TOL);
}

TEST_F(UnitConversion, RevToRad)
{
  test_conversion_no_throw("rev", "r", 0.0, 2*PI, TOL);
}

TEST_F(UnitConversion, ArcMinToDeg)
{
  test_conversion_no_throw("am", "d", 0.0, (1.0/60.0), TOL);
}

TEST_F(UnitConversion, ArcSecToDeg)
{
  test_conversion_no_throw("as", "d", 0.0, (1.0/(60.0*60.0)), TOL);
}

//Mass Conversions

TEST_F(UnitConversion, KilogramToKilogram)
{
  test_conversion_no_throw("kg", "kg", 0.0, 1.0, TOL);
}

TEST_F(UnitConversion, KilogramToSlug)
{
  test_conversion_no_throw("kg", "sl", 0.0, (1.0/14.59390), TOL);
}

TEST_F(UnitConversion, KilogramToPoundMass)
{
  test_conversion_no_throw("kg", "lbm", 0.0, (1.0/0.45359237), TOL);
}

TEST_F(UnitConversion, KilogramToGram)
{
  test_conversion_no_throw("kg", "g", 0.0, 1000.0, TOL);
}

TEST_F(UnitConversion, KilogramToMetricTon)
{
  test_conversion_no_throw("kg", "mt", 0.0, (1.0/1000.0), TOL);
}

TEST_F(UnitConversion, MetricTonToKilogram)
{
  test_conversion_no_throw("mt", "kg", 0.0, 1000.0, TOL);
}

//Force Conversions

TEST_F(UnitConversion, NewtonToNewton)
{
  test_conversion_no_throw("N", "N", 0.0, 1.0, TOL);
}

TEST_F(UnitConversion, NewtonToKiloNewton)
{
  test_conversion_no_throw("N", "kN", 0.0, (1.0/1000.0), TOL);
}

TEST_F(UnitConversion, NewtonToOunce)
{
  test_conversion_no_throw("N", "oz", 0.0, 3.596944, tolerance(-5));
}

TEST_F(UnitConversion, NewtonToPoundForce)
{
  test_conversion_no_throw("N", "lbf", 0.0, 0.224809, TOL);
}

//Voltage Conversions

TEST_F(UnitConversion, VoltToVolt)
{
  test_conversion_no_throw("v", "v", 0.0, 1.0, TOL);
}


TEST_F(UnitConversion, VoltToKiloVolt)
{
  test_conversion_no_throw("v", "kv", 0.0, (1.0/1000.0), TOL);
}

//Current Conversions

TEST_F(UnitConversion, AmpToAmp)
{
  test_conversion_no_throw("amp", "amp", 0.0, 1.0, TOL);
}


TEST_F(UnitConversion, AmpToMilliAmp)
{
  test_conversion_no_throw("amp", "mamp", 0.0, 1000.0, TOL);
}

//Unitless Conversions

TEST_F(UnitConversion, DoubleDashToDoubleDash)
{
  test_conversion_no_throw("--", "--", 0.0, 1.0, TOL);
}

TEST_F(UnitConversion, DoubleDashToCount)
{
  test_conversion_no_throw("--", "cnt", 0.0, 1.0, TOL);
}

TEST_F(UnitConversion, DoubleDashToOne)
{
  test_conversion_no_throw("--", "one", 0.0, 1.0, TOL);
}

//Frequency Conversions

TEST_F(UnitConversion, HertzToHertz)
{
  test_conversion_no_throw("Hz", "Hz", 0.0, 1.0, TOL);
}

TEST_F(UnitConversion, HertzToMegaHertz)
{
  test_conversion_no_throw("Hz", "MHz", 0.0, (1.0/1000000.0), TOL);
}

TEST_F(UnitConversion, HertzToGigaHertz)
{
  test_conversion_no_throw("Hz", "GHz", 0.0, (1.0/1000000000.0), TOL);
}

//Temperature Conversions

TEST_F(UnitConversion, CelsiusToKelvin)
{
  test_conversion_no_throw("C", "K", 273.15, 1.0, TOL);
}

TEST_F(UnitConversion, CelsiusToFahrenheit)
{
  test_conversion_no_throw("C", "F", 32.0, 1.8, TOL);
}

TEST_F(UnitConversion, CelsiusToRankine)
{
  test_conversion_no_throw("C", "R", (1.8*273.15), 1.8, TOL);
}

TEST_F(UnitConversion, KelvinToCelsius)
{
  test_conversion_no_throw("K", "C", -273.15, 1.0, TOL);
}

TEST_F(UnitConversion, KelvinToFahrenheit)
{
  test_conversion_no_throw("K", "F", (-273.15*1.8+32), 1.8, TOL);
}

TEST_F(UnitConversion, KelvinToRankine)
{
  test_conversion_no_throw("K", "R", 0.0, 1.8, TOL);
}

TEST_F(UnitConversion, RankineToCelsius)
{
  test_conversion_no_throw("R", "C", -273.15, (5.0/9.0), TOL);
}

TEST_F(UnitConversion, RankineToKelvin)
{
  test_conversion_no_throw("R", "K", 0.0, (5.0/9.0), TOL);
}

TEST_F(UnitConversion, RankineToFahrenheit)
{
  test_conversion_no_throw("R", "F", (-273.15*1.8+32), 1.0, TOL);
}

TEST_F(UnitConversion, CelsiusZero)
{
  test_temperature_conversion("C", 0.0, 0.0, 273.15, 32.0, 491.67, TOL);
}

TEST_F(UnitConversion, KelvinZero)
{
  test_temperature_conversion("K", 0.0, -273.15, 0.0, -459.67, 0.0, TOL);
}

TEST_F(UnitConversion, FahrenheitZero)
{
  test_temperature_conversion("F", 0.0, (-160.0/9.0), ((-160.0/9.0)+273.15), 0.0, 459.67);
}

TEST_F(UnitConversion, RankineZero)
{
  test_temperature_conversion("R", 0.0, -273.15, 0.0, -459.67, 0.0, TOL);
}

TEST_F(UnitConversion, CelsiusBodyTemp)
{
  test_temperature_conversion("C", 36.8, 36.8, 309.95, 98.24, 557.91, TOL);
}

TEST_F(UnitConversion, KelvinBodyTemp)
{
  test_temperature_conversion("K", 310.0, 36.85, 310.0, 98.33, 558.0, TOL);
}

TEST_F(UnitConversion, FahrenheitBodyTemp)
{
  test_temperature_conversion("F", 98.2, (331.0/9.0), (2789.35/9.0), 98.2, 557.87, TOL);
}

TEST_F(UnitConversion, RankineBodyTemp)
{
  test_temperature_conversion("R", 557.9, (331.15/9.0), (2789.5/9.0), 98.23, 557.9, TOL);
}

//Inverted Units

TEST_F(UnitConversion, InvSecondsToInvMinutes)
{
test_conversion_no_throw("1/s", "1/min", 0.0, 60.0, TOL);
}

TEST_F(UnitConversion, InvMinutesToInvSeconds)
{
  test_conversion_no_throw("1/min", "1/s", 0.0, (1.0/60.0), TOL);
}

//Due to the arbitrary definition of the behavior of converstions of
//composite units with temperature, no assertions are given as to the value of
//the conversion function for such conversions. The tests only validate that
//conversions are valid and throw no exeption.

//Products Containing Temperature Pimitives

TEST_F(UnitConversion, CelsiusSecondToFahrenheitMinute)
{
  test_conversion_no_expect("C*s", "F*min");
}

TEST_F(UnitConversion, FahrenheitMinuteToCelsiusSecond)
{
  test_conversion_no_expect("F*min", "C*s");
}

//Products of a temperature primitive

TEST_F(UnitConversion, FahrenheitSquaredToFahrenheitSquared)
{
  test_conversion_no_throw("F2", "F2", 0.0, 1.0, TOL);
}

TEST_F(UnitConversion, CelsiusFahrenheitToCelsiusFahrenheit)
{
  test_conversion_no_throw("C*F", "C*F", 0.0, 1.0, TOL);
}

TEST_F(UnitConversion, FahrenheitSquaredToCelsiusSquared)
{
  test_conversion_throw("F2", "C2");
}

TEST_F(UnitConversion, CelsiusSquaredToFahrenheitSquared)
{
  test_conversion_throw("C2", "F2");
}

TEST_F(UnitConversion, FahrenheitSquaredToCelsiusFahrenheit)
{
  test_conversion_throw("F2", "C*F");
}


//Ratios containing a temperature primitive

TEST_F(UnitConversion, CelsiusPerSecondToFahrenheitPerSecond)
{
  test_conversion_no_expect("C/s", "F/s");
}

TEST_F(UnitConversion, FahrenheitPerSecondToCelsiusPerSecond)
{
  test_conversion_no_expect("F/s", "C/s");
}

TEST_F(UnitConversion, FahrenheitPerSecondToCelsiusPerMinute)
{
  test_conversion_no_expect("F/s", "C/min");
}

//Complex Conversions

TEST_F(UnitConversion, CompositeNewtonToCompositePoundForce)
{
  test_conversion_no_throw("kg*m/s2", "lbm*ft/s*s", 0.0, (1/(0.45359237*0.3048)) , TOL);
}

TEST_F(UnitConversion, CompositePoundForceToCompositeNewton)
{
  test_conversion_no_throw("lbm*ft/s2", "kg*m/s*s", 0.0, (0.45359237*0.3048), TOL);
}

TEST_F(UnitConversion, FootPoundsToNewtonMeters)
{
  test_conversion_no_throw("lbf*ft", "N*m", 0.0, (4.4482216152605*0.3048), TOL);
}

TEST_F(UnitConversion, FootPoundsToNewtonMetersWithConvertTo)
{
  //testReq.add_requirement("2060756805");

  ASSERT_NO_THROW(Unit NewtonMeter("N*m"));
  Unit NewtonMeter("N*m");
  ASSERT_NO_THROW(NewtonMeter.Convert_to(1, "lbf*ft"));
  double result = NewtonMeter.Convert_to(1, "lbf*ft");
  ASSERT_NEAR(1.0/(4.4482216152605*0.3048), result, TOL);
}

//Communtativity of factors

TEST_F(UnitConversion, CompositePoundForceToCompositeNewtonCommutative)
{
  test_conversion_no_throw("lbm*ft/s*s", "m*kg/s2", 0.0, (0.45359237*0.3048), TOL);
}

TEST_F(UnitConversion, CompositeNewtonToCompositePoundForceCommutative)
{
  test_conversion_no_throw("m*kg/s2", "lbm*ft/s*s", 0.0, (1/(0.45359237*0.3048)), TOL);
}

//Collection of Denominators

TEST_F(UnitConversion, PerSecondSquaredToPerSecondTimesSecond)
{
  test_conversion_no_throw("kg*m/s2", "kg*m/s*s", 0.0, 1.0, TOL);
}

TEST_F(UnitConversion, PerSecondSquaredToPerSecondPerSecond)
{
  test_conversion_no_throw("kg*m/s2", "kg*m/s/s", 0.0, 1.0, TOL);
}

TEST_F(UnitConversion, PerSecondTimesSecondToPerSecondPerSecond)
{
  test_conversion_no_throw("kg*m/s*s", "kg*m/s/s", 0.0, 1.0, TOL);
}

TEST_F(UnitConversion, PerSecondTimesSecondToPerSecondSquared)
{
  test_conversion_no_throw("kg*m/s*s", "kg*m/s2", 0.0, 1.0, TOL);
}

TEST_F(UnitConversion, PerSecondPerSecondToPerSecondTimesSecond)
{
  test_conversion_no_throw("kg*m/s/s", "kg*m/s*s", 0.0, 1.0, TOL);
}

TEST_F(UnitConversion, PerSecondPerSecondToPerSecondSquared)
{
  test_conversion_no_throw("kg*m/s/s", "kg*m/s2", 0.0, 1.0, TOL);
}

//Test getUnitName()

TEST_F(UnitConversion, GetUnitName)
{
  //testReq.add_requirement("");

  Unit meter_per_second_squared("m/s2");
  std::string unit = "m/s2";

  ASSERT_STRCASEEQ(unit.c_str(), meter_per_second_squared.getUnitName());
}

//Testing setUnitName()

TEST_F(UnitConversion, SetUnitName)
{
  //testReq.add_requirement("");

  Unit meter_per_second_squared("m/s2");
  Unit copy;
  UCFn *cf = (UCFn*) NULL;

  copy.setUnitName("m/s2");

  ASSERT_NO_THROW(cf = meter_per_second_squared.Conversion_to(&copy));

  EXPECT_NEAR(0.0, cf->C[0], TOL);
  EXPECT_NEAR(1.0, cf->C[1], TOL);

  clean_up_UCFn(&cf);
  ASSERT_EQ((UCFn*) NULL, cf);
}

//Syntax Error

TEST_F(UnitConversion, InvalidUnit)
{
  //testReq.add_requirement("2743423356");

  std::cerr << "The purpose of this test is to throw to an exception. Error messages are expected." << std::endl;
  ASSERT_THROW(Unit u("foo"), Unit::CONVERSION_ERROR);
}

TEST_F(UnitConversion, MissingProduct)
{
  std::cerr << "The purpose of this test is to throw to an exception. Error messages are expected." << std::endl;
  ASSERT_THROW(Unit u("C**m"), Unit::CONVERSION_ERROR);
}

TEST_F(UnitConversion, InvalidExponent)
{
  //testReq.add_requirement("2743423356");

  std::cerr << "The purpose of this test is to throw to an exception. Error messages are expected." << std::endl;
  ASSERT_THROW(Unit u("m4"), Unit::CONVERSION_ERROR);
  ASSERT_NO_THROW(Unit u("m3"));
}

TEST_F(UnitConversion, InvalidRatio)
{
  //testReq.add_requirement("2743423356");

  std::cerr << "The purpose of this test is to throw to an exception. Error messages are expected." << std::endl;
  ASSERT_THROW(Unit u("/C"), Unit::CONVERSION_ERROR);
}


TEST_F(UnitConversion, InvalidFootPound)
{
  //testReq.add_requirement("2743423356");
  std::cerr << "The purpose of this test is to throw to an exception. Error messages are expected." << std::endl;
  ASSERT_THROW(Unit u("lbfft"), Unit::CONVERSION_ERROR);
}

//Invalid Conversion Tests
//Should throw an exception (exeption = PASS)

TEST_F(UnitConversion, NewtonMeterToInvalidFootPound)
{
  //testReq.add_requirement("2743423356");
  Unit unit1("N*m");

  std::cerr << "The purpose of this test is to throw to an exception. Error messages are expected." << std::endl;
  ASSERT_THROW(unit1.Convert_to(1.0, "lbfft"), Unit::CONVERSION_ERROR);
}

TEST_F(UnitConversion, CelsiusToMeter)
{
  test_conversion_throw("C", "m");
}

TEST_F(UnitConversion, MilliAmpsToKilogram)
{
  test_conversion_throw("mamp", "kg");
}

TEST_F(UnitConversion, VoltsToMegaHertz)
{
  test_conversion_throw("v", "MHz");
}

TEST_F(UnitConversion, RadianToDoubleDash)
{
  test_conversion_throw("r", "--");
}

TEST_F(UnitConversion, DoubleDashToMeterPerSecondSquared)
{
  test_conversion_throw("--", "m/s2");
}

TEST_F(UnitConversion, SecondToMeterPerSecond)
{
  test_conversion_throw("s", "m/s");
}

TEST_F(UnitConversion, KilogramMeterPerSecondToCount)
{
  test_conversion_throw("kg*m/s", "cnt");
}

TEST_F(UnitConversion, KilogramMeterPerSecondToMeterSquared)
{
  test_conversion_throw("kg*m/s", "m2");
}

}