7bc6ab74a8
* added SIM_singlerigidbody * Removed a few sections in the README file * Removed the sims directory * Added shutdown job and made minor changes to body.cpp --------- Co-authored-by: Wallace <bnwalla1@scooby.trick.gov> |
||
|---|---|---|
| .. | ||
| Images | ||
| models | ||
| Modified_data | ||
| RUN_test | ||
| README.md | ||
| S_define | ||
| S_overrides.mk | ||
Single Rigid Body
SIM_singlerigidbody is a simulation of the motion of a sphere that is a single rigid body with six degrees of freedom.
The motion of the sphere is found by using Euler's equations of motion, and can be controlled by changing several initial input values such as force, position, angle, angular velocity, velocity, and position of the force. The recorded data of the motion can then be viewed and analyzed.
Dynamics model
Equations of Motion
To determine the sphere's motion, we will use Euler's equations of motion for a single rigid body. Euler's equations describe the combined translational and rotational dynamics of a rigid body in three-dimensional space.
Where,
- is a 6x1 column vector.
- F is the applied force.
- τ is the torque.
- is a 6x6 matrix.
- m is the mass.
- I 3x3 is the identity matrix.
- I is the inertia.
- C m is the center of mass.
- is a 6x1 column vector.
- a o is the acceleration.
- is a 6x1 column vector.
- ω A is the angular velocity.
Force
The force acting on the sphere is calculated by the cross product of the rotation matrix and initial force.
Torque
Torque is found by the cross product of the rotation matrix and the cross product of the position of force and initial force.
Mass
The default value of the mass of the sphere is:
Radius
The default value of the radius is:
Center of mass
The center of mass of a sphere is equal to its radius.
Inertia
Inertia of a sphere is calculated by:
Acceleration and angular acceleration
To determine the acceleration and angular acceleration, dLU_Choleski must be used. dLU_Choleski solves linear sets of equations in the form of [A]x = b and returns the vector x, which is the acceleration. It decomposes the symmetric, positive definite [A] matrix into a lower triangular form, where we can then substitute and our equation becomes:
The term 'a' is a 6x1 vector. Acceleration is equal to the first three values of vector a and angular acceleration is equal to the last three values of vector a.
State Integration
The state is defined by position, velocity, angle, and angular velocity. They are calculated by numerically integrating velocity, acceleration, angular velocity, and angular acceleration, respectively.
Position
The position of the sphere is determined by integrating the velocity over time.
Velocity
The velocity is determined by integrating the acceleration of the sphere over time.
Angle
The angle is determined by integrating the angular velocity over time.
Angular velocity
The angular velocity is determined by integrating the angular acceleration over time.
Inputs
| Variable | Type | Units |
|---|---|---|
| dyn.body.POS_INIT | double[3] | m |
| dyn.body.ANGLE_INIT | double[3] | rad |
| dyn.body.OMEGA_INIT | double[3] | rad*s^-1 |
| dyn.body.FORCE_INIT | double[3] | N |
| dyn.body.TORQUE_INIT | double[3] | N*m |
| dyn.body.VEL_INIT | double[3] | m/s |
| dyn.body.POS_FORCE | double[3] | m |
Outputs
| Variable | Type | Units |
|---|---|---|
| dyn.body.pos | double[3] | m |
| dyn.body.vel | double[3] | m/s |
| dyn.body.acc | double[3] | m/s^2 |
| dyn.FORCE_INIT | double[3] | N |
| dyn.force | double[3] | N |
| dyn.body.angle_force | double[3] | rad |
| dyn.body.omegaDot | double[3] | rad/^s2 |
| dyn.body.omega | double[3] | rad*s^-1 |
| dyn.body.rotate | double[3] |