from zope.interface import Interface from foolscap.schema import StringConstraint, ListOf, TupleOf, SetOf, DictOf, \ ChoiceOf from foolscap import RemoteInterface, Referenceable HASH_SIZE=32 Hash = StringConstraint(maxLength=HASH_SIZE, minLength=HASH_SIZE)# binary format 32-byte SHA256 hash Nodeid = StringConstraint(maxLength=20, minLength=20) # binary format 20-byte SHA1 hash FURL = StringConstraint(1000) StorageIndex = StringConstraint(16) URI = StringConstraint(300) # kind of arbitrary MAX_BUCKETS = 200 # per peer # MAX_SEGMENT_SIZE in encode.py is 1 MiB (this constraint allows k = 1) ShareData = StringConstraint(2**20) URIExtensionData = StringConstraint(1000) LeaseRenewSecret = Hash # used to protect bucket lease renewal requests LeaseCancelSecret = Hash # used to protect bucket lease cancellation requests # Announcements are (FURL, service_name, remoteinterface_name, # nickname, my_version, oldest_supported) # the (FURL, service_name, remoteinterface_name) refer to the service being # announced. The (nickname, my_version, oldest_supported) refer to the # client as a whole. The my_version/oldest_supported strings can be parsed # by an allmydata.util.version.Version instance, and then compared. The # first goal is to make sure that nodes are not confused by speaking to an # incompatible peer. The second goal is to enable the development of # backwards-compatibility code. Announcement = TupleOf(FURL, str, str, str, str, str) class RIIntroducerSubscriberClient(RemoteInterface): __remote_name__ = "RIIntroducerSubscriberClient.tahoe.allmydata.com" def announce(announcements=SetOf(Announcement)): """I accept announcements from the publisher.""" return None def set_encoding_parameters(parameters=(int, int, int)): """Advise the client of the recommended k-of-n encoding parameters for this grid. 'parameters' is a tuple of (k, desired, n), where 'n' is the total number of shares that will be created for any given file, while 'k' is the number of shares that must be retrieved to recover that file, and 'desired' is the minimum number of shares that must be placed before the uploader will consider its job a success. n/k is the expansion ratio, while k determines the robustness. Introducers should specify 'n' according to the expected size of the grid (there is no point to producing more shares than there are peers), and k according to the desired reliability-vs-overhead goals. Note that setting k=1 is equivalent to simple replication. """ return None # When Foolscap can handle multiple interfaces (Foolscap#17), the # full-powered introducer will implement both RIIntroducerPublisher and # RIIntroducerSubscriberService. Until then, we define # RIIntroducerPublisherAndSubscriberService as a combination of the two, and # make everybody use that. class RIIntroducerPublisher(RemoteInterface): """To publish a service to the world, connect to me and give me your announcement message. I will deliver a copy to all connected subscribers.""" __remote_name__ = "RIIntroducerPublisher.tahoe.allmydata.com" def publish(announcement=Announcement): # canary? return None class RIIntroducerSubscriberService(RemoteInterface): __remote_name__ = "RIIntroducerSubscriberService.tahoe.allmydata.com" def subscribe(subscriber=RIIntroducerSubscriberClient, service_name=str): """Give me a subscriber reference, and I will call its new_peers() method will any announcements that match the desired service name. I will ignore duplicate subscriptions. """ return None class RIIntroducerPublisherAndSubscriberService(RemoteInterface): __remote_name__ = "RIIntroducerPublisherAndSubscriberService.tahoe.allmydata.com" def publish(announcement=Announcement): return None def subscribe(subscriber=RIIntroducerSubscriberClient, service_name=str): return None class IIntroducerClient(Interface): """I provide service introduction facilities for a node. I help nodes publish their services to the rest of the world, and I help them learn about services available on other nodes.""" def publish(furl, service_name, remoteinterface_name): """Once you call this, I will tell the world that the Referenceable available at FURL is available to provide a service named SERVICE_NAME. The precise definition of the service being provided is identified by the Foolscap 'remote interface name' in the last parameter: this is supposed to be a globally-unique string that identifies the RemoteInterface that is implemented.""" def subscribe_to(service_name): """Call this if you will eventually want to use services with the given SERVICE_NAME. This will prompt me to subscribe to announcements of those services. You can pick up the announcements later by calling get_all_connections_for() or get_permuted_peers(). """ def get_all_connections(): """Return a frozenset of (nodeid, service_name, rref) tuples, one for each active connection we've established to a remote service. This is mostly useful for unit tests that need to wait until a certain number of connections have been made.""" def get_all_connectors(): """Return a dict that maps from (nodeid, service_name) to a RemoteServiceConnector instance for all services that we are actively trying to connect to. Each RemoteServiceConnector has the following public attributes:: service_name: the type of service provided, like 'storage' announcement_time: when we first heard about this service last_connect_time: when we last established a connection last_loss_time: when we last lost a connection version: the peer's version, from the most recent connection oldest_supported: the peer's oldest supported version, same rref: the RemoteReference, if connected, otherwise None remote_host: the IAddress, if connected, otherwise None This method is intended for monitoring interfaces, such as a web page which describes connecting and connected peers. """ def get_all_peerids(): """Return a frozenset of all peerids to whom we have a connection (to one or more services) established. Mostly useful for unit tests.""" def get_all_connections_for(service_name): """Return a frozenset of (nodeid, service_name, rref) tuples, one for each active connection that provides the given SERVICE_NAME.""" def get_permuted_peers(service_name, key): """Returns an ordered list of (peerid, rref) tuples, selecting from the connections that provide SERVICE_NAME, using a hash-based permutation keyed by KEY. This randomizes the service list in a repeatable way, to distribute load over many peers. """ def connected_to_introducer(): """Returns a boolean, True if we are currently connected to the introducer, False if not.""" class RIBucketWriter(RemoteInterface): def write(offset=int, data=ShareData): return None def close(): """ If the data that has been written is incomplete or inconsistent then the server will throw the data away, else it will store it for future retrieval. """ return None def abort(): """Abandon all the data that has been written. """ return None class RIBucketReader(RemoteInterface): def read(offset=int, length=int): return ShareData TestVector = ListOf(TupleOf(int, int, str, str)) # elements are (offset, length, operator, specimen) # operator is one of "lt, le, eq, ne, ge, gt" # nop always passes and is used to fetch data while writing. # you should use length==len(specimen) for everything except nop DataVector = ListOf(TupleOf(int, ShareData)) # (offset, data). This limits us to 30 writes of 1MiB each per call TestAndWriteVectorsForShares = DictOf(int, TupleOf(TestVector, DataVector, ChoiceOf(None, int))) # new_length ReadVector = ListOf(TupleOf(int, int)) ReadData = ListOf(ShareData) # returns data[offset:offset+length] for each element of TestVector class RIStorageServer(RemoteInterface): __remote_name__ = "RIStorageServer.tahoe.allmydata.com" def get_versions(): """Return a tuple of (my_version, oldest_supported) strings. Each string can be parsed by an allmydata.util.version.Version instance, and then compared. The first goal is to make sure that nodes are not confused by speaking to an incompatible peer. The second goal is to enable the development of backwards-compatibility code. This method is likely to change in incompatible ways until we get the whole compatibility scheme nailed down. """ return TupleOf(str, str) def allocate_buckets(storage_index=StorageIndex, renew_secret=LeaseRenewSecret, cancel_secret=LeaseCancelSecret, sharenums=SetOf(int, maxLength=MAX_BUCKETS), allocated_size=int, canary=Referenceable): """ @param storage_index: the index of the bucket to be created or increfed. @param sharenums: these are the share numbers (probably between 0 and 99) that the sender is proposing to store on this server. @param renew_secret: This is the secret used to protect bucket refresh This secret is generated by the client and stored for later comparison by the server. Each server is given a different secret. @param cancel_secret: Like renew_secret, but protects bucket decref. @param canary: If the canary is lost before close(), the bucket is deleted. @return: tuple of (alreadygot, allocated), where alreadygot is what we already have and is what we hereby agree to accept. New leases are added for shares in both lists. """ return TupleOf(SetOf(int, maxLength=MAX_BUCKETS), DictOf(int, RIBucketWriter, maxKeys=MAX_BUCKETS)) def renew_lease(storage_index=StorageIndex, renew_secret=LeaseRenewSecret): """ Renew the lease on a given bucket. Some networks will use this, some will not. """ def cancel_lease(storage_index=StorageIndex, cancel_secret=LeaseCancelSecret): """ Cancel the lease on a given bucket. If this was the last lease on the bucket, the bucket will be deleted. """ def get_buckets(storage_index=StorageIndex): return DictOf(int, RIBucketReader, maxKeys=MAX_BUCKETS) def slot_readv(storage_index=StorageIndex, shares=ListOf(int), readv=ReadVector): """Read a vector from the numbered shares associated with the given storage index. An empty shares list means to return data from all known shares. Returns a dictionary with one key per share.""" return DictOf(int, ReadData) # shnum -> results def slot_testv_and_readv_and_writev(storage_index=StorageIndex, secrets=TupleOf(Hash, Hash, Hash), tw_vectors=TestAndWriteVectorsForShares, r_vector=ReadVector, ): """General-purpose test-and-set operation for mutable slots. Perform a bunch of comparisons against the existing shares. If they all pass, then apply a bunch of write vectors to those shares. Then use the read vectors to extract data from all the shares and return the data. This method is, um, large. The goal is to allow clients to update all the shares associated with a mutable file in a single round trip. @param storage_index: the index of the bucket to be created or increfed. @param write_enabler: a secret that is stored along with the slot. Writes are accepted from any caller who can present the matching secret. A different secret should be used for each slot*server pair. @param renew_secret: This is the secret used to protect bucket refresh This secret is generated by the client and stored for later comparison by the server. Each server is given a different secret. @param cancel_secret: Like renew_secret, but protects bucket decref. The 'secrets' argument is a tuple of (write_enabler, renew_secret, cancel_secret). The first is required to perform any write. The latter two are used when allocating new shares. To simply acquire a new lease on existing shares, use an empty testv and an empty writev. Each share can have a separate test vector (i.e. a list of comparisons to perform). If all vectors for all shares pass, then all writes for all shares are recorded. Each comparison is a 4-tuple of (offset, length, operator, specimen), which effectively does a bool( (read(offset, length)) OPERATOR specimen ) and only performs the write if all these evaluate to True. Basic test-and-set uses 'eq'. Write-if-newer uses a seqnum and (offset, length, 'lt', specimen). Write-if-same-or-newer uses 'le'. Reads from the end of the container are truncated, and missing shares behave like empty ones, so to assert that a share doesn't exist (for use when creating a new share), use (0, 1, 'eq', ''). The write vector will be applied to the given share, expanding it if necessary. A write vector applied to a share number that did not exist previously will cause that share to be created. Each write vector is accompanied by a 'new_length' argument. If new_length is not None, use it to set the size of the container. This can be used to pre-allocate space for a series of upcoming writes, or truncate existing data. If the container is growing, new_length will be applied before datav. If the container is shrinking, it will be applied afterwards. The read vector is used to extract data from all known shares, *before* any writes have been applied. The same vector is used for all shares. This captures the state that was tested by the test vector. This method returns two values: a boolean and a dict. The boolean is True if the write vectors were applied, False if not. The dict is keyed by share number, and each value contains a list of strings, one for each element of the read vector. If the write_enabler is wrong, this will raise BadWriteEnablerError. To enable share migration, the exception will have the nodeid used for the old write enabler embedded in it, in the following string:: The write enabler was recorded by nodeid '%s'. Note that the nodeid here is encoded using the same base32 encoding used by Foolscap and allmydata.util.idlib.nodeid_b2a(). """ return TupleOf(bool, DictOf(int, ReadData)) class IStorageBucketWriter(Interface): def put_block(segmentnum=int, data=ShareData): """@param data: For most segments, this data will be 'blocksize' bytes in length. The last segment might be shorter. @return: a Deferred that fires (with None) when the operation completes """ def put_plaintext_hashes(hashes=ListOf(Hash, maxLength=2**20)): """ @return: a Deferred that fires (with None) when the operation completes """ def put_crypttext_hashes(hashes=ListOf(Hash, maxLength=2**20)): """ @return: a Deferred that fires (with None) when the operation completes """ def put_block_hashes(blockhashes=ListOf(Hash, maxLength=2**20)): """ @return: a Deferred that fires (with None) when the operation completes """ def put_share_hashes(sharehashes=ListOf(TupleOf(int, Hash), maxLength=2**20)): """ @return: a Deferred that fires (with None) when the operation completes """ def put_uri_extension(data=URIExtensionData): """This block of data contains integrity-checking information (hashes of plaintext, crypttext, and shares), as well as encoding parameters that are necessary to recover the data. This is a serialized dict mapping strings to other strings. The hash of this data is kept in the URI and verified before any of the data is used. All buckets for a given file contain identical copies of this data. The serialization format is specified with the following pseudocode: for k in sorted(dict.keys()): assert re.match(r'^[a-zA-Z_\-]+$', k) write(k + ':' + netstring(dict[k])) @return: a Deferred that fires (with None) when the operation completes """ def close(): """Finish writing and close the bucket. The share is not finalized until this method is called: if the uploading client disconnects before calling close(), the partially-written share will be discarded. @return: a Deferred that fires (with None) when the operation completes """ class IStorageBucketReader(Interface): def get_block(blocknum=int): """Most blocks will be the same size. The last block might be shorter than the others. @return: ShareData """ def get_plaintext_hashes(): """ @return: ListOf(Hash, maxLength=2**20) """ def get_crypttext_hashes(): """ @return: ListOf(Hash, maxLength=2**20) """ def get_block_hashes(): """ @return: ListOf(Hash, maxLength=2**20) """ def get_share_hashes(): """ @return: ListOf(TupleOf(int, Hash), maxLength=2**20) """ def get_uri_extension(): """ @return: URIExtensionData """ # hm, we need a solution for forward references in schemas from foolscap.schema import Any FileNode_ = Any() # TODO: foolscap needs constraints on copyables DirectoryNode_ = Any() # TODO: same AnyNode_ = ChoiceOf(FileNode_, DirectoryNode_) EncryptedThing = str class IURI(Interface): def init_from_string(uri): """Accept a string (as created by my to_string() method) and populate this instance with its data. I am not normally called directly, please use the module-level uri.from_string() function to convert arbitrary URI strings into IURI-providing instances.""" def is_readonly(): """Return False if this URI be used to modify the data. Return True if this URI cannot be used to modify the data.""" def is_mutable(): """Return True if the data can be modified by *somebody* (perhaps someone who has a more powerful URI than this one).""" def get_readonly(): """Return another IURI instance, which represents a read-only form of this one. If is_readonly() is True, this returns self.""" def get_verifier(): """Return an instance that provides IVerifierURI, which can be used to check on the availability of the file or directory, without providing enough capabilities to actually read or modify the contents. This may return None if the file does not need checking or verification (e.g. LIT URIs). """ def to_string(): """Return a string of printable ASCII characters, suitable for passing into init_from_string.""" class IVerifierURI(Interface): def init_from_string(uri): """Accept a string (as created by my to_string() method) and populate this instance with its data. I am not normally called directly, please use the module-level uri.from_string() function to convert arbitrary URI strings into IURI-providing instances.""" def to_string(): """Return a string of printable ASCII characters, suitable for passing into init_from_string.""" class IDirnodeURI(Interface): """I am a URI which represents a dirnode.""" class IFileURI(Interface): """I am a URI which represents a filenode.""" def get_size(): """Return the length (in bytes) of the file that I represent.""" class IMutableFileURI(Interface): """I am a URI which represents a mutable filenode.""" class INewDirectoryURI(Interface): pass class IReadonlyNewDirectoryURI(Interface): pass class IFilesystemNode(Interface): def get_uri(): """ Return the URI that can be used by others to get access to this node. If this node is read-only, the URI will only offer read-only access. If this node is read-write, the URI will offer read-write access. If you have read-write access to a node and wish to share merely read-only access with others, use get_readonly_uri(). """ def get_readonly_uri(): """Return the directory URI that can be used by others to get read-only access to this directory node. The result is a read-only URI, regardless of whether this dirnode is read-only or read-write. If you have merely read-only access to this dirnode, get_readonly_uri() will return the same thing as get_uri(). """ def get_verifier(): """Return an IVerifierURI instance that represents the 'verifiy/refresh capability' for this node. The holder of this capability will be able to renew the lease for this node, protecting it from garbage-collection. They will also be able to ask a server if it holds a share for the file or directory. """ def check(): """Perform a file check. See IChecker.check for details.""" def is_readonly(): """Return True if this reference provides mutable access to the given file or directory (i.e. if you can modify it), or False if not. Note that even if this reference is read-only, someone else may hold a read-write reference to it.""" def is_mutable(): """Return True if this file or directory is mutable (by *somebody*, not necessarily you), False if it is is immutable. Note that a file might be mutable overall, but your reference to it might be read-only. On the other hand, all references to an immutable file will be read-only; there are no read-write references to an immutable file. """ class IMutableFilesystemNode(IFilesystemNode): pass class IFileNode(IFilesystemNode): def download(target): """Download the file's contents to a given IDownloadTarget""" def download_to_data(): """Download the file's contents. Return a Deferred that fires with those contents.""" def get_size(): """Return the length (in bytes) of the data this node represents.""" class IMutableFileNode(IFileNode, IMutableFilesystemNode): def download_to_data(): """Download the file's contents. Return a Deferred that fires with those contents. If there are multiple retrievable versions in the grid (because you failed to avoid simultaneous writes, see docs/mutable.txt), this will return the first version that it can reconstruct, and will silently ignore the others. In the future, a more advanced API will signal and provide access to the multiple heads.""" def replace(newdata): """Replace the old contents with the new data. Returns a Deferred that fires (with None) when the operation is complete. If the node detects that there are multiple outstanding versions of the file, this will raise ConsistencyError, and may leave the distributed file in an unusual state (the node will try to ensure that at least one version of the file remains retrievable, but it may or may not be the one you just tried to upload). You should respond to this by downloading the current contents of the file and retrying the replace() operation. """ def get_writekey(): """Return this filenode's writekey, or None if the node does not have write-capability. This may be used to assist with data structures that need to make certain data available only to writers, such as the read-write child caps in dirnodes. The recommended process is to have reader-visible data be submitted to the filenode in the clear (where it will be encrypted by the filenode using the readkey), but encrypt writer-visible data using this writekey. """ class IDirectoryNode(IMutableFilesystemNode): """I represent a name-to-child mapping, holding the tahoe equivalent of a directory. All child names are unicode strings, and all children are some sort of IFilesystemNode (either files or subdirectories). """ def get_uri(): """ The dirnode ('1') URI returned by this method can be used in set_uri() on a different directory ('2') to 'mount' a reference to this directory ('1') under the other ('2'). This URI is just a string, so it can be passed around through email or other out-of-band protocol. """ def get_readonly_uri(): """ The dirnode ('1') URI returned by this method can be used in set_uri() on a different directory ('2') to 'mount' a reference to this directory ('1') under the other ('2'). This URI is just a string, so it can be passed around through email or other out-of-band protocol. """ def list(): """I return a Deferred that fires with a dictionary mapping child name (a unicode string) to (node, metadata_dict) tuples, in which 'node' is either an IFileNode or IDirectoryNode, and 'metadata_dict' is a dictionary of metadata.""" def has_child(name): """I return a Deferred that fires with a boolean, True if there exists a child of the given name, False if not. The child name must be a unicode string.""" def get(name): """I return a Deferred that fires with a specific named child node, either an IFileNode or an IDirectoryNode. The child name must be a unicode string.""" def get_metadata_for(name): """I return a Deferred that fires with the metadata dictionary for a specific named child node. This metadata is stored in the *edge*, not in the child, so it is attached to the parent dirnode rather than the child dir-or-file-node. The child name must be a unicode string.""" def set_metadata_for(name, metadata): """I replace any existing metadata for the named child with the new metadata. The child name must be a unicode string. This metadata is stored in the *edge*, not in the child, so it is attached to the parent dirnode rather than the child dir-or-file-node. I return a Deferred (that fires with this dirnode) when the operation is complete.""" def get_child_at_path(path): """Transform a child path into an IDirectoryNode or IFileNode. I perform a recursive series of 'get' operations to find the named descendant node. I return a Deferred that fires with the node, or errbacks with IndexError if the node could not be found. The path can be either a single string (slash-separated) or a list of path-name elements. All elements must be unicode strings. """ def set_uri(name, child_uri, metadata=None): """I add a child (by URI) at the specific name. I return a Deferred that fires when the operation finishes. I will replace any existing child of the same name. The child name must be a unicode string. The child_uri could be for a file, or for a directory (either read-write or read-only, using a URI that came from get_uri() ). If metadata= is provided, I will use it as the metadata for the named edge. This will replace any existing metadata. If metadata= is left as the default value of None, I will set ['mtime'] to the current time, and I will set ['ctime'] to the current time if there was not already a child by this name present. This roughly matches the ctime/mtime semantics of traditional filesystems. If this directory node is read-only, the Deferred will errback with a NotMutableError.""" def set_children(entries): """Add multiple (name, child_uri) pairs (or (name, child_uri, metadata) triples) to a directory node. Returns a Deferred that fires (with None) when the operation finishes. This is equivalent to calling set_uri() multiple times, but is much more efficient. All child names must be unicode strings. """ def set_node(name, child, metadata=None): """I add a child at the specific name. I return a Deferred that fires when the operation finishes. This Deferred will fire with the child node that was just added. I will replace any existing child of the same name. The child name must be a unicode string. If metadata= is provided, I will use it as the metadata for the named edge. This will replace any existing metadata. If metadata= is left as the default value of None, I will set ['mtime'] to the current time, and I will set ['ctime'] to the current time if there was not already a child by this name present. This roughly matches the ctime/mtime semantics of traditional filesystems. If this directory node is read-only, the Deferred will errback with a NotMutableError.""" def set_nodes(entries): """Add multiple (name, child_node) pairs (or (name, child_node, metadata) triples) to a directory node. Returns a Deferred that fires (with None) when the operation finishes. This is equivalent to calling set_node() multiple times, but is much more efficient. All child names must be unicode strings.""" def add_file(name, uploadable, metadata=None): """I upload a file (using the given IUploadable), then attach the resulting FileNode to the directory at the given name. I set metadata the same way as set_uri and set_node. The child name must be a unicode string. I return a Deferred that fires (with the IFileNode of the uploaded file) when the operation completes.""" def delete(name): """I remove the child at the specific name. I return a Deferred that fires when the operation finishes. The child name must be a unicode string.""" def create_empty_directory(name): """I create and attach an empty directory at the given name. The child name must be a unicode string. I return a Deferred that fires when the operation finishes.""" def move_child_to(current_child_name, new_parent, new_child_name=None): """I take one of my children and move them to a new parent. The child is referenced by name. On the new parent, the child will live under 'new_child_name', which defaults to 'current_child_name'. TODO: what should we do about metadata? I return a Deferred that fires when the operation finishes. The child name must be a unicode string.""" def build_manifest(): """Return a frozenset of verifier-capability strings for all nodes (directories and files) reachable from this one.""" class ICodecEncoder(Interface): def set_params(data_size, required_shares, max_shares): """Set up the parameters of this encoder. This prepares the encoder to perform an operation that converts a single block of data into a number of shares, such that a future ICodecDecoder can use a subset of these shares to recover the original data. This operation is invoked by calling encode(). Once the encoding parameters are set up, the encode operation can be invoked multiple times. set_params() prepares the encoder to accept blocks of input data that are exactly 'data_size' bytes in length. The encoder will be prepared to produce 'max_shares' shares for each encode() operation (although see the 'desired_share_ids' to use less CPU). The encoding math will be chosen such that the decoder can get by with as few as 'required_shares' of these shares and still reproduce the original data. For example, set_params(1000, 5, 5) offers no redundancy at all, whereas set_params(1000, 1, 10) provides 10x redundancy. Numerical Restrictions: 'data_size' is required to be an integral multiple of 'required_shares'. In general, the caller should choose required_shares and max_shares based upon their reliability requirements and the number of peers available (the total storage space used is roughly equal to max_shares*data_size/required_shares), then choose data_size to achieve the memory footprint desired (larger data_size means more efficient operation, smaller data_size means smaller memory footprint). In addition, 'max_shares' must be equal to or greater than 'required_shares'. Of course, setting them to be equal causes encode() to degenerate into a particularly slow form of the 'split' utility. See encode() for more details about how these parameters are used. set_params() must be called before any other ICodecEncoder methods may be invoked. """ def get_encoder_type(): """Return a short string that describes the type of this encoder. There is required to be a global table of encoder classes. This method returns an index into this table; the value at this index is an encoder class, and this encoder is an instance of that class. """ def get_serialized_params(): # TODO: maybe, maybe not """Return a string that describes the parameters of this encoder. This string can be passed to the decoder to prepare it for handling the encoded shares we create. It might contain more information than was presented to set_params(), if there is some flexibility of parameter choice. This string is intended to be embedded in the URI, so there are several restrictions on its contents. At the moment I'm thinking that this means it may contain hex digits and hyphens, and nothing else. The idea is that the URI contains something like '%s:%s:%s' % (encoder.get_encoder_name(), encoder.get_serialized_params(), b2a(crypttext_hash)), and this is enough information to construct a compatible decoder. """ def get_block_size(): """Return the length of the shares that encode() will produce. """ def encode_proposal(data, desired_share_ids=None): """Encode some data. 'data' must be a string (or other buffer object), and len(data) must be equal to the 'data_size' value passed earlier to set_params(). This will return a Deferred that will fire with two lists. The first is a list of shares, each of which is a string (or other buffer object) such that len(share) is the same as what get_share_size() returned earlier. The second is a list of shareids, in which each is an integer. The lengths of the two lists will always be equal to each other. The user should take care to keep each share closely associated with its shareid, as one is useless without the other. The length of this output list will normally be the same as the value provided to the 'max_shares' parameter of set_params(). This may be different if 'desired_share_ids' is provided. 'desired_share_ids', if provided, is required to be a sequence of ints, each of which is required to be >= 0 and < max_shares. If not provided, encode() will produce 'max_shares' shares, as if 'desired_share_ids' were set to range(max_shares). You might use this if you initially thought you were going to use 10 peers, started encoding, and then two of the peers dropped out: you could use desired_share_ids= to skip the work (both memory and CPU) of producing shares for the peers which are no longer available. """ def encode(inshares, desired_share_ids=None): """Encode some data. This may be called multiple times. Each call is independent. inshares is a sequence of length required_shares, containing buffers (i.e. strings), where each buffer contains the next contiguous non-overlapping segment of the input data. Each buffer is required to be the same length, and the sum of the lengths of the buffers is required to be exactly the data_size promised by set_params(). (This implies that the data has to be padded before being passed to encode(), unless of course it already happens to be an even multiple of required_shares in length.) ALSO: the requirement to break up your data into 'required_shares' chunks before calling encode() feels a bit surprising, at least from the point of view of a user who doesn't know how FEC works. It feels like an implementation detail that has leaked outside the abstraction barrier. Can you imagine a use case in which the data to be encoded might already be available in pre-segmented chunks, such that it is faster or less work to make encode() take a list rather than splitting a single string? ALSO ALSO: I think 'inshares' is a misleading term, since encode() is supposed to *produce* shares, so what it *accepts* should be something other than shares. Other places in this interface use the word 'data' for that-which-is-not-shares.. maybe we should use that term? 'desired_share_ids', if provided, is required to be a sequence of ints, each of which is required to be >= 0 and < max_shares. If not provided, encode() will produce 'max_shares' shares, as if 'desired_share_ids' were set to range(max_shares). You might use this if you initially thought you were going to use 10 peers, started encoding, and then two of the peers dropped out: you could use desired_share_ids= to skip the work (both memory and CPU) of producing shares for the peers which are no longer available. For each call, encode() will return a Deferred that fires with two lists, one containing shares and the other containing the shareids. The get_share_size() method can be used to determine the length of the share strings returned by encode(). Each shareid is a small integer, exactly as passed into 'desired_share_ids' (or range(max_shares), if desired_share_ids was not provided). The shares and their corresponding shareids are required to be kept together during storage and retrieval. Specifically, the share data is useless by itself: the decoder needs to be told which share is which by providing it with both the shareid and the actual share data. This function will allocate an amount of memory roughly equal to:: (max_shares - required_shares) * get_share_size() When combined with the memory that the caller must allocate to provide the input data, this leads to a memory footprint roughly equal to the size of the resulting encoded shares (i.e. the expansion factor times the size of the input segment). """ # rejected ideas: # # returning a list of (shareidN,shareN) tuples instead of a pair of # lists (shareids..,shares..). Brian thought the tuples would # encourage users to keep the share and shareid together throughout # later processing, Zooko pointed out that the code to iterate # through two lists is not really more complicated than using a list # of tuples and there's also a performance improvement # # having 'data_size' not required to be an integral multiple of # 'required_shares'. Doing this would require encode() to perform # padding internally, and we'd prefer to have any padding be done # explicitly by the caller. Yes, it is an abstraction leak, but # hopefully not an onerous one. class ICodecDecoder(Interface): def set_serialized_params(params): """Set up the parameters of this encoder, from a string returned by encoder.get_serialized_params().""" def get_needed_shares(): """Return the number of shares needed to reconstruct the data. set_serialized_params() is required to be called before this.""" def decode(some_shares, their_shareids): """Decode a partial list of shares into data. 'some_shares' is required to be a sequence of buffers of sharedata, a subset of the shares returned by ICodecEncode.encode(). Each share is required to be of the same length. The i'th element of their_shareids is required to be the shareid of the i'th buffer in some_shares. This returns a Deferred which fires with a sequence of buffers. This sequence will contain all of the segments of the original data, in order. The sum of the lengths of all of the buffers will be the 'data_size' value passed into the original ICodecEncode.set_params() call. To get back the single original input block of data, use ''.join(output_buffers), or you may wish to simply write them in order to an output file. Note that some of the elements in the result sequence may be references to the elements of the some_shares input sequence. In particular, this means that if those share objects are mutable (e.g. arrays) and if they are changed, then both the input (the 'some_shares' parameter) and the output (the value given when the deferred is triggered) will change. The length of 'some_shares' is required to be exactly the value of 'required_shares' passed into the original ICodecEncode.set_params() call. """ class IEncoder(Interface): """I take an object that provides IEncryptedUploadable, which provides encrypted data, and a list of shareholders. I then encode, hash, and deliver shares to those shareholders. I will compute all the necessary Merkle hash trees that are necessary to validate the crypttext that eventually comes back from the shareholders. I provide the URI Extension Block Hash, and the encoding parameters, both of which must be included in the URI. I do not choose shareholders, that is left to the IUploader. I must be given a dict of RemoteReferences to storage buckets that are ready and willing to receive data. """ def set_size(size): """Specify the number of bytes that will be encoded. This must be peformed before get_serialized_params() can be called. """ def set_params(params): """Override the default encoding parameters. 'params' is a tuple of (k,d,n), where 'k' is the number of required shares, 'd' is the shares_of_happiness, and 'n' is the total number of shares that will be created. Encoding parameters can be set in three ways. 1: The Encoder class provides defaults (3/7/10). 2: the Encoder can be constructed with an 'options' dictionary, in which the needed_and_happy_and_total_shares' key can be a (k,d,n) tuple. 3: set_params((k,d,n)) can be called. If you intend to use set_params(), you must call it before get_share_size or get_param are called. """ def set_encrypted_uploadable(u): """Provide a source of encrypted upload data. 'u' must implement IEncryptedUploadable. When this is called, the IEncryptedUploadable will be queried for its length and the storage_index that should be used. This returns a Deferred that fires with this Encoder instance. This must be performed before start() can be called. """ def get_param(name): """Return an encoding parameter, by name. 'storage_index': return a string with the (16-byte truncated SHA-256 hash) storage index to which these shares should be pushed. 'share_counts': return a tuple describing how many shares are used: (needed_shares, shares_of_happiness, total_shares) 'num_segments': return an int with the number of segments that will be encoded. 'segment_size': return an int with the size of each segment. 'block_size': return the size of the individual blocks that will be delivered to a shareholder's put_block() method. By knowing this, the shareholder will be able to keep all blocks in a single file and still provide random access when reading them. # TODO: can we avoid exposing this? 'share_size': an int with the size of the data that will be stored on each shareholder. This is aggregate amount of data that will be sent to the shareholder, summed over all the put_block() calls I will ever make. It is useful to determine this size before asking potential shareholders whether they will grant a lease or not, since their answers will depend upon how much space we need. TODO: this might also include some amount of overhead, like the size of all the hashes. We need to decide whether this is useful or not. 'serialized_params': a string with a concise description of the codec name and its parameters. This may be passed into the IUploadable to let it make sure that the same file encoded with different parameters will result in different storage indexes. Once this is called, set_size() and set_params() may not be called. """ def set_shareholders(shareholders): """Tell the encoder where to put the encoded shares. 'shareholders' must be a dictionary that maps share number (an integer ranging from 0 to n-1) to an instance that provides IStorageBucketWriter. This must be performed before start() can be called.""" def start(): """Begin the encode/upload process. This involves reading encrypted data from the IEncryptedUploadable, encoding it, uploading the shares to the shareholders, then sending the hash trees. set_encrypted_uploadable() and set_shareholders() must be called before this can be invoked. This returns a Deferred that fires with a tuple of (uri_extension_hash, needed_shares, total_shares, size) when the upload process is complete. This information, plus the encryption key, is sufficient to construct the URI. """ class IDecoder(Interface): """I take a list of shareholders and some setup information, then download, validate, decode, and decrypt data from them, writing the results to an output file. I do not locate the shareholders, that is left to the IDownloader. I must be given a dict of RemoteReferences to storage buckets that are ready to send data. """ def setup(outfile): """I take a file-like object (providing write and close) to which all the plaintext data will be written. TODO: producer/consumer . Maybe write() should return a Deferred that indicates when it will accept more data? But probably having the IDecoder be a producer is easier to glue to IConsumer pieces. """ def set_shareholders(shareholders): """I take a dictionary that maps share identifiers (small integers) to RemoteReferences that provide RIBucketReader. This must be called before start().""" def start(): """I start the download. This process involves retrieving data and hash chains from the shareholders, using the hashes to validate the data, decoding the shares into segments, decrypting the segments, then writing the resulting plaintext to the output file. I return a Deferred that will fire (with self) when the download is complete. """ class IDownloadTarget(Interface): def open(size): """Called before any calls to write() or close(). If an error occurs before any data is available, fail() may be called without a previous call to open(). 'size' is the length of the file being downloaded, in bytes.""" def write(data): """Output some data to the target.""" def close(): """Inform the target that there is no more data to be written.""" def fail(why): """fail() is called to indicate that the download has failed. 'why' is a Failure object indicating what went wrong. No further methods will be invoked on the IDownloadTarget after fail().""" def register_canceller(cb): """The FileDownloader uses this to register a no-argument function that the target can call to cancel the download. Once this canceller is invoked, no further calls to write() or close() will be made.""" def finish(): """When the FileDownloader is done, this finish() function will be called. Whatever it returns will be returned to the invoker of Downloader.download. """ class IDownloader(Interface): def download(uri, target): """Perform a CHK download, sending the data to the given target. 'target' must provide IDownloadTarget. Returns a Deferred that fires (with the results of target.finish) when the download is finished, or errbacks if something went wrong.""" class IEncryptedUploadable(Interface): def set_upload_status(upload_status): """Provide an IUploadStatus object that should be filled with status information. The IEncryptedUploadable is responsible for setting key-determination progress ('chk'), size, storage_index, and ciphertext-fetch progress. It may delegate some of this responsibility to others, in particular to the IUploadable.""" def get_size(): """This behaves just like IUploadable.get_size().""" def get_all_encoding_parameters(): """Return a Deferred that fires with a tuple of (k,happy,n,segment_size). The segment_size will be used as-is, and must match the following constraints: it must be a multiple of k, and it shouldn't be unreasonably larger than the file size (if segment_size is larger than filesize, the difference must be stored as padding). This usually passes through to the IUploadable method of the same name. The encoder strictly obeys the values returned by this method. To make an upload use non-default encoding parameters, you must arrange to control the values that this method returns. """ def get_storage_index(): """Return a Deferred that fires with a 16-byte storage index. """ def read_encrypted(length, hash_only): """This behaves just like IUploadable.read(), but returns crypttext instead of plaintext. If hash_only is True, then this discards the data (and returns an empty list); this improves efficiency when resuming an interrupted upload (where we need to compute the plaintext hashes, but don't need the redundant encrypted data).""" def get_plaintext_hashtree_leaves(first, last, num_segments): """Get the leaf nodes of a merkle hash tree over the plaintext segments, i.e. get the tagged hashes of the given segments. The segment size is expected to be generated by the IEncryptedUploadable before any plaintext is read or ciphertext produced, so that the segment hashes can be generated with only a single pass. This returns a Deferred which fires with a sequence of hashes, using: tuple(segment_hashes[first:last]) 'num_segments' is used to assert that the number of segments that the IEncryptedUploadable handled matches the number of segments that the encoder was expecting. This method must not be called until the final byte has been read from read_encrypted(). Once this method is called, read_encrypted() can never be called again. """ def get_plaintext_hash(): """Get the hash of the whole plaintext. This returns a Deferred which fires with a tagged SHA-256 hash of the whole plaintext, obtained from hashutil.plaintext_hash(data). """ def close(): """Just like IUploadable.close().""" class IUploadable(Interface): def set_upload_status(upload_status): """Provide an IUploadStatus object that should be filled with status information. The IUploadable is responsible for setting key-determination progress ('chk').""" def set_default_encoding_parameters(params): """Set the default encoding parameters, which must be a dict mapping strings to ints. The meaningful keys are 'k', 'happy', 'n', and 'max_segment_size'. These might have an influence on the final encoding parameters returned by get_all_encoding_parameters(), if the Uploadable doesn't have more specific preferences. This call is optional: if it is not used, the Uploadable will use some built-in defaults. If used, this method must be called before any other IUploadable methods to have any effect. """ def get_size(): """Return a Deferred that will fire with the length of the data to be uploaded, in bytes. This will be called before the data is actually used, to compute encoding parameters. """ def get_all_encoding_parameters(): """Return a Deferred that fires with a tuple of (k,happy,n,segment_size). The segment_size will be used as-is, and must match the following constraints: it must be a multiple of k, and it shouldn't be unreasonably larger than the file size (if segment_size is larger than filesize, the difference must be stored as padding). The relative values of k and n allow some IUploadables to request better redundancy than others (in exchange for consuming more space in the grid). Larger values of segment_size reduce hash overhead, while smaller values reduce memory footprint and cause data to be delivered in smaller pieces (which may provide a smoother and more predictable download experience). The encoder strictly obeys the values returned by this method. To make an upload use non-default encoding parameters, you must arrange to control the values that this method returns. One way to influence them may be to call set_encoding_parameters() before calling get_all_encoding_parameters(). """ def get_encryption_key(): """Return a Deferred that fires with a 16-byte AES key. This key will be used to encrypt the data. The key will also be hashed to derive the StorageIndex. Uploadables which want to achieve convergence should hash their file contents and the serialized_encoding_parameters to form the key (which of course requires a full pass over the data). Uploadables can use the upload.ConvergentUploadMixin class to achieve this automatically. Uploadables which do not care about convergence (or do not wish to make multiple passes over the data) can simply return a strongly-random 16 byte string. get_encryption_key() may be called multiple times: the IUploadable is required to return the same value each time. """ def read(length): """Return a Deferred that fires with a list of strings (perhaps with only a single element) which, when concatenated together, contain the next 'length' bytes of data. If EOF is near, this may provide fewer than 'length' bytes. The total number of bytes provided by read() before it signals EOF must equal the size provided by get_size(). If the data must be acquired through multiple internal read operations, returning a list instead of a single string may help to reduce string copies. 'length' will typically be equal to (min(get_size(),1MB)/req_shares), so a 10kB file means length=3kB, 100kB file means length=30kB, and >=1MB file means length=300kB. This method provides for a single full pass through the data. Later use cases may desire multiple passes or access to only parts of the data (such as a mutable file making small edits-in-place). This API will be expanded once those use cases are better understood. """ def close(): """The upload is finished, and whatever filehandle was in use may be closed.""" class IUploadResults(Interface): """I am returned by upload() methods. I contain a number of public attributes which can be read to determine the results of the upload. Some of these are functional, some are timing information. All of these may be None.:: .file_size : the size of the file, in bytes .uri : the CHK read-cap for the file .ciphertext_fetched : how many bytes were fetched by the helper .sharemap : dict mapping share number to placement string .servermap : dict mapping server peerid to a set of share numbers .timings : dict of timing information, mapping name to seconds (float) total : total upload time, start to finish storage_index : time to compute the storage index peer_selection : time to decide which peers will be used contacting_helper : initial helper query to upload/no-upload decision existence_check : helper pre-upload existence check helper_total : initial helper query to helper finished pushing cumulative_fetch : helper waiting for ciphertext requests total_fetch : helper start to last ciphertext response cumulative_encoding : just time spent in zfec cumulative_sending : just time spent waiting for storage servers hashes_and_close : last segment push to shareholder close total_encode_and_push : first encode to shareholder close """ class IDownloadResults(Interface): """I am created internally by download() methods. I contain a number of public attributes which contain details about the download process.:: .file_size : the size of the file, in bytes .servers_used : set of server peerids that were used during download .server_problems : dict mapping server peerid to a problem string. Only servers that had problems (bad hashes, disconnects) are listed here. .servermap : dict mapping server peerid to a set of share numbers. Only servers that had any shares are listed here. .timings : dict of timing information, mapping name to seconds (float) peer_selection : time to ask servers about shares servers_peer_selection : dict of peerid to DYHB-query time uri_extension : time to fetch a copy of the URI extension block hashtrees : time to fetch the hash trees segments : time to fetch, decode, and deliver segments cumulative_fetch : time spent waiting for storage servers cumulative_decode : just time spent in zfec cumulative_decrypt : just time spent in decryption total : total download time, start to finish fetch_per_server : dict of peerid to list of per-segment fetch times """ class IUploader(Interface): def upload(uploadable): """Upload the file. 'uploadable' must impement IUploadable. This returns a Deferred which fires with an UploadResults instance, from which the URI of the file can be obtained as results.uri .""" def upload_ssk(write_capability, new_version, uploadable): """TODO: how should this work?""" class IChecker(Interface): def check(uri_to_check): """Accepts an IVerifierURI, and checks upon the health of its target. For now, uri_to_check must be an IVerifierURI. In the future we expect to relax that to be anything that can be adapted to IVerifierURI (like read-only or read-write dirnode/filenode URIs). This returns a Deferred. For dirnodes, this fires with either True or False (dirnodes are not distributed, so their health is a boolean). For filenodes, this fires with a tuple of (needed_shares, total_shares, found_shares, sharemap). The first three are ints. The basic health of the file is found_shares / needed_shares: if less than 1.0, the file is unrecoverable. The sharemap has a key for each sharenum. The value is a list of (binary) nodeids who hold that share. If two shares are kept on the same nodeid, they will fail as a pair, and overall reliability is decreased. The IChecker instance remembers the results of the check. By default, these results are stashed in RAM (and are forgotten at shutdown). If a file named 'checker_results.db' exists in the node's basedir, it is used as a sqlite database of results, making them persistent across runs. To start using this feature, just 'touch checker_results.db', and the node will initialize it properly the next time it is started. """ def verify(uri_to_check): """Accepts an IVerifierURI, and verifies the crypttext of the target. This is a more-intensive form of checking. For verification, the file's crypttext contents are retrieved, and the associated hash checks are performed. If a storage server is holding a corrupted share, verification will detect the problem, but checking will not. This returns a Deferred that fires with True if the crypttext hashes look good, and will probably raise an exception if anything goes wrong. For dirnodes, 'verify' is the same as 'check', so the Deferred will fire with True or False. Verification currently only uses a minimal subset of peers, so a lot of share corruption will not be caught by it. We expect to improve this in the future. """ def checker_results_for(uri_to_check): """Accepts an IVerifierURI, and returns a list of previously recorded checker results. This method performs no checking itself: it merely reports the results of checks that have taken place in the past. Each element of the list is a two-entry tuple: (when, results). The 'when' values are timestamps (float seconds since epoch), and the results are as defined in the check() method. Note: at the moment, this is specified to return synchronously. We might need to back away from this in the future. """ class IClient(Interface): def upload(uploadable): """Upload some data into a CHK, get back the UploadResults for it. @param uploadable: something that implements IUploadable @return: a Deferred that fires with the UploadResults instance. To get the URI for this file, use results.uri . """ def create_mutable_file(contents=""): """Create a new mutable file with contents, get back the URI string. @param contents: the initial contents to place in the file. @return: a Deferred that fires with tne (string) SSK URI for the new file. """ def create_empty_dirnode(): """Create a new dirnode, empty and unattached. @return: a Deferred that fires with the new IDirectoryNode instance. """ def create_node_from_uri(uri): """Create a new IFilesystemNode instance from the uri, synchronously. @param uri: a string or IURI-providing instance. This could be for a LiteralFileNode, a CHK file node, a mutable file node, or a directory node @return: an instance that provides IFilesystemNode (or more usefully one of its subclasses). File-specifying URIs will result in IFileNode or IMutableFileNode -providing instances, like FileNode, LiteralFileNode, or MutableFileNode. Directory-specifying URIs will result in IDirectoryNode-providing instances, like NewDirectoryNode. """ class IClientStatus(Interface): def list_all_uploads(): """Return a list of uploader objects, one for each upload which currently has an object available (tracked with weakrefs). This is intended for debugging purposes.""" def list_active_uploads(): """Return a list of active IUploadStatus objects.""" def list_recent_uploads(): """Return a list of IUploadStatus objects for the most recently started uploads.""" def list_all_downloads(): """Return a list of downloader objects, one for each download which currently has an object available (tracked with weakrefs). This is intended for debugging purposes.""" def list_active_downloads(): """Return a list of active IDownloadStatus objects.""" def list_recent_downloads(): """Return a list of IDownloadStatus objects for the most recently started downloads.""" class IUploadStatus(Interface): def get_storage_index(): """Return a string with the (binary) storage index in use on this upload. Returns None if the storage index has not yet been calculated.""" def get_size(): """Return an integer with the number of bytes that will eventually be uploaded for this file. Returns None if the size is not yet known. """ def using_helper(): """Return True if this upload is using a Helper, False if not.""" def get_status(): """Return a string describing the current state of the upload process.""" def get_progress(): """Returns a tuple of floats, (chk, ciphertext, encode_and_push), each from 0.0 to 1.0 . 'chk' describes how much progress has been made towards hashing the file to determine a CHK encryption key: if non-convergent encryption is in use, this will be trivial, otherwise the whole file must be hashed. 'ciphertext' describes how much of the ciphertext has been pushed to the helper, and is '1.0' for non-helper uploads. 'encode_and_push' describes how much of the encode-and-push process has finished: for helper uploads this is dependent upon the helper providing progress reports. It might be reasonable to add all three numbers and report the sum to the user.""" def get_active(): """Return True if the upload is currently active, False if not.""" def get_results(): """Return an instance of UploadResults (which contains timing and sharemap information). Might return None if the upload is not yet finished.""" def get_counter(): """Each upload status gets a unique number: this method returns that number. This provides a handle to this particular upload, so a web page can generate a suitable hyperlink.""" class IDownloadStatus(Interface): def get_storage_index(): """Return a string with the (binary) storage index in use on this download. This may be None if there is no storage index (i.e. LIT files).""" def get_size(): """Return an integer with the number of bytes that will eventually be retrieved for this file. Returns None if the size is not yet known. """ def using_helper(): """Return True if this download is using a Helper, False if not.""" def get_status(): """Return a string describing the current state of the download process.""" def get_progress(): """Returns a float (from 0.0 to 1.0) describing the amount of the download that has completed. This value will remain at 0.0 until the first byte of plaintext is pushed to the download target.""" def get_active(): """Return True if the download is currently active, False if not.""" def get_counter(): """Each download status gets a unique number: this method returns that number. This provides a handle to this particular download, so a web page can generate a suitable hyperlink.""" class IPublishStatus(Interface): pass class IRetrieveStatus(Interface): pass class NotCapableError(Exception): """You have tried to write to a read-only node.""" class BadWriteEnablerError(Exception): pass class RIControlClient(RemoteInterface): def wait_for_client_connections(num_clients=int): """Do not return until we have connections to at least NUM_CLIENTS storage servers. """ def upload_from_file_to_uri(filename=str): """Upload a file to the grid. This accepts a filename (which must be absolute) that points to a file on the node's local disk. The node will read the contents of this file, upload it to the grid, then return the URI at which it was uploaded. """ return URI def download_from_uri_to_file(uri=URI, filename=str): """Download a file from the grid, placing it on the node's local disk at the given filename (which must be absolute[?]). Returns the absolute filename where the file was written.""" return str # debug stuff def get_memory_usage(): """Return a dict describes the amount of memory currently in use. The keys are 'VmPeak', 'VmSize', and 'VmData'. The values are integers, measuring memory consupmtion in bytes.""" return DictOf(str, int) def speed_test(count=int, size=int, mutable=Any()): """Write 'count' tempfiles to disk, all of the given size. Measure how long (in seconds) it takes to upload them all to the servers. Then measure how long it takes to download all of them. If 'mutable' is 'create', time creation of mutable files. If 'mutable' is 'upload', then time access to the same mutable file instead of creating one. Returns a tuple of (upload_time, download_time). """ return (float, float) def measure_peer_response_time(): """Send a short message to each connected peer, and measure the time it takes for them to respond to it. This is a rough measure of the application-level round trip time. @return: a dictionary mapping peerid to a float (RTT time in seconds) """ return DictOf(Nodeid, float) UploadResults = Any() #DictOf(str, str) class RIEncryptedUploadable(RemoteInterface): __remote_name__ = "RIEncryptedUploadable.tahoe.allmydata.com" def get_size(): return int def get_all_encoding_parameters(): return (int, int, int, long) def read_encrypted(offset=long, length=long): return ListOf(str) def get_plaintext_hashtree_leaves(first=int, last=int, num_segments=int): return ListOf(Hash) def get_plaintext_hash(): return Hash def close(): return None class RICHKUploadHelper(RemoteInterface): __remote_name__ = "RIUploadHelper.tahoe.allmydata.com" def upload(reader=RIEncryptedUploadable): return UploadResults class RIHelper(RemoteInterface): __remote_name__ = "RIHelper.tahoe.allmydata.com" def upload_chk(si=StorageIndex): """See if a file with a given storage index needs uploading. The helper will ask the appropriate storage servers to see if the file has already been uploaded. If so, the helper will return a set of 'upload results' that includes whatever hashes are needed to build the read-cap, and perhaps a truncated sharemap. If the file has not yet been uploaded (or if it was only partially uploaded), the helper will return an empty upload-results dictionary and also an RICHKUploadHelper object that will take care of the upload process. The client should call upload() on this object and pass it a reference to an RIEncryptedUploadable object that will provide ciphertext. When the upload is finished, the upload() method will finish and return the upload results. """ return (UploadResults, ChoiceOf(RICHKUploadHelper, None)) class RIStatsProvider(RemoteInterface): __remote_name__ = "RIStatsProvider.tahoe.allmydata.com" """ Provides access to statistics and monitoring information. """ def get_stats(): """ returns a dictionary containing 'counters' and 'stats', each a dictionary with string counter/stat name keys, and numeric values. counters are monotonically increasing measures of work done, and stats are instantaneous measures (potentially time averaged internally) """ return DictOf(str, DictOf(str, ChoiceOf(float, int, long))) class RIStatsGatherer(RemoteInterface): __remote_name__ = "RIStatsGatherer.tahoe.allmydata.com" """ Provides a monitoring service for centralised collection of stats """ def provide(provider=RIStatsProvider, nickname=str): """ @param provider: a stats collector instance which should be polled periodically by the gatherer to collect stats. @param nickname: a name useful to identify the provided client """ return None class IStatsProducer(Interface): def get_stats(): """ returns a dictionary, with str keys representing the names of stats to be monitored, and numeric values. """