== FileEncoding ==

When the client wishes to upload an immutable file, the first step is to
decide upon an encryption key. There are two methods: convergent or random.
The goal of the convergent-key method is to make sure that multiple uploads
of the same file will result in only one copy on the grid, whereas the
random-key method does not provide this "convergence" feature.

The convergent-key method computes the SHA-256d hash of a single-purpose tag,
the encoding parameters, a "convergence secret", and the contents of the
file. It uses a portion of the resulting hash as the AES encryption key.
There are security concerns with using convergence this approach (the
"partial-information guessing attack", please see ticket #365 for some
references), so Tahoe uses a separate (randomly-generated) "convergence
secret" for each node, stored in NODEDIR/private/convergence . The encoding
parameters (k, N, and the segment size) are included in the hash to make sure
that two different encodings of the same file will get different keys. This
method requires an extra IO pass over the file, to compute this key, and
encryption cannot be started until the pass is complete. This means that the
convergent-key method will require at least two total passes over the file.

The random-key method simply chooses a random encryption key. Convergence is
disabled, however this method does not require a separate IO pass, so upload
can be done with a single pass. This mode makes it easier to perform
streaming upload.

Regardless of which method is used to generate the key, the plaintext file is
encrypted (using AES in CTR mode) to produce a ciphertext. This ciphertext is
then erasure-coded and uploaded to the servers. Two hashes of the ciphertext
are generated as the encryption proceeds: a flat hash of the whole
ciphertext, and a Merkle tree. These are used to verify the correctness of
the erasure decoding step, and can be used by a "verifier" process to make
sure the file is intact without requiring the decryption key.

The encryption key is hashed (with SHA-256d and a single-purpose tag) to
produce the "Storage Index". This Storage Index (or SI) is used to identify
the shares produced by the method described below. The grid can be thought of
as a large table that maps Storage Index to a ciphertext. Since the
ciphertext is stored as erasure-coded shares, it can also be thought of as a
table that maps SI to shares.

Anybody who knows a Storage Index can retrieve the associated ciphertext:
ciphertexts are not secret.


[[Image(file-encoding1.png)]]

The ciphertext file is then broken up into segments. The last segment is
likely to be shorter than the rest. Each segment is erasure-coded into a
number of "subshares". This takes place one segment at a time. (In fact,
encryption and erasure-coding take place at the same time, once per plaintext
segment). Larger segment sizes result in less overhead overall, but increase
both the memory footprint and the "alacrity" (the number of bytes we have to
receive before we can deliver validated plaintext to the user). The current
default segment size is 128KiB.

One subshare from each segment is sent to each shareholder (aka leaseholder,
aka landlord, aka storage node, aka peer). The "share" held by each remote
shareholder is nominally just a collection of these subshares. The file will
be recoverable when a certain number of shares have been retrieved.

[[Image(file-encoding2.png)]]

The subshares are hashed as they are generated and transmitted. These
subshare hashes are put into a Merkle hash tree. When the last share has been
created, the merkle tree is completed and delivered to the peer. Later, when
we retrieve these subshares, the peer will send many of the merkle hash tree
nodes ahead of time, so we can validate each subshare independently.

The root of this subshare hash tree is called the "subshare root hash" and
used in the next step.

[[Image(file-encoding3.png)]]

There is a higher-level Merkle tree called the "share hash tree". Its leaves
are the subshare root hashes from each share. The root of this tree is called
the "share root hash" and is included in the "URI Extension Block", aka UEB.
The ciphertext hash and Merkle tree are also put here, along with the
original file size, and the encoding parameters. The UEB contains all the
non-secret values that could be put in the URI, but would have made the URI
too big. So instead, the UEB is stored with the share, and the hash of the
UEB is put in the URI.

The URI then contains the secret encryption key and the UEB hash. It also
contains the basic encoding parameters (k and N) and the file size, to make
download more efficient (by knowing the number of required shares ahead of
time, sufficient download queries can be generated in parallel).

The URI (also known as the immutable-file read-cap, since possessing it
grants the holder the capability to read the file's plaintext) is then
represented as a (relatively) short printable string like so:

 URI:CHK:auxet66ynq55naiy2ay7cgrshm:6rudoctmbxsmbg7gwtjlimd6umtwrrsxkjzthuldsmo4nnfoc6fa:3:10:1000000

[[Image(file-encoding4.png)]]

During download, when a peer begins to transmit a share, it first transmits
all of the parts of the share hash tree that are necessary to validate its
subshare root hash. Then it transmits the portions of the subshare hash tree
that are necessary to validate the first subshare. Then it transmits the
first subshare. It then continues this loop: transmitting any portions of the
subshare hash tree to validate subshare#N, then sending subshare#N.

[[Image(file-encoding5.png)]]

So the "share" that is sent to the remote peer actually consists of three
pieces, sent in a specific order as they become available, and retrieved
during download in a different order according to when they are needed.

The first piece is the subshares themselves, one per segment. The last
subshare will likely be shorter than the rest, because the last segment is
probably shorter than the rest. The second piece is the subshare hash tree,
consisting of a total of two SHA-1 hashes per subshare. The third piece is a
hash chain from the share hash tree, consisting of log2(numshares) hashes.

During upload, all subshares are sent first, followed by the subshare hash
tree, followed by the share hash chain. During download, the share hash chain
is delivered first, followed by the subshare root hash. The client then uses
the hash chain to validate the subshare root hash. Then the peer delivers
enough of the subshare hash tree to validate the first subshare, followed by
the first subshare itself. The subshare hash chain is used to validate the
subshare, then it is passed (along with the first subshare from several other
peers) into decoding, to produce the first segment of crypttext, which is
then decrypted to produce the first segment of plaintext, which is finally
delivered to the user.

[[Image(file-encoding6.png)]]

== Hashes ==

All hashes use SHA-256d, as defined in Practical Cryptography (by Ferguson
and Schneier). All hashes use a single-purpose tag, e.g. the hash that
converts an encryption key into a storage index is defined as follows:

 SI = SHA256d(netstring("allmydata_immutable_key_to_storage_index_v1") + key)

When two separate values need to be combined together in a hash, we wrap each
in a netstring.

Using SHA-256d (instead of plain SHA-256) guards against length-extension
attacks. Using the tag protects our Merkle trees against attacks in which the
hash of a leaf is confused with a hash of two children (allowing an attacker
to generate corrupted data that nevertheless appears to be valid), and is
simply good "cryptograhic hygiene". The "Chosen Protocol Attack" by Kelsey,
Schneier, and Wagner (http://www.schneier.com/paper-chosen-protocol.html) is
relevant. Putting the tag in a netstring guards against attacks that seek to
confuse the end of the tag with the beginning of the subsequent value.