This should hopefully satisfy the Debian requirement to include original
sources. The old minified files for d3 and jquery were 63k and 91k
respectively, while the new unminified files are 133k and 293k.
We also change the order of setting up attributes in Retrieve so that _raise_notenoughshareserror() can be called from _setup_download.
Signed-off-by: Daira Hopwood <david-sarah@jacaranda.org>
A simple refactoring. Doesn't even require a new or updated unit test.
Author: Zooko O'Whielacronx <zooko@zooko.com>
Signed-off-by: Daira Hopwood <david-sarah@jacaranda.org>
For a brief while (in between releases 1.9 and 1.10, specifically from
revision bc21726 on 12-Mar-2012, until bf416af on 10-Jun-2012), the new
introducer code stored its node key in NODEDIR/private/server.privkey .
After that point, it was updated to store this key in
NODEDIR/private/node.privkey instead. Fallback code was added to read
from the old location if present (so that folks using development
versions could keep their node keys after the bf416af change).
This patch removes the fallback code. If you have a node which was run
under a version of Tahoe within this range, you need to manually update
your node by running:
mv NODEDIR/private/server.privkey NODEDIR/private/node.privkey
and then restart the node. If you accidentally start an older node with
code after this patch, it will create a new key (and other peers will
think a new server has appeared). You can either stick with the new key,
or use the command above to switch back to the old key.
See docs/nodekeys.rst (not yet written) for details about the node key
and how it is used.
The new rules for "bin/tahoe ARG1.. SUBCOMMAND ARG2.." arg:
* --node-directory is only accepted in ARG1, not ARG2
* create-*/start/stop/restart accept --basedir in ARG2, or an explicit
basedir argument
* only one of --node-directory/--basedir/explicit-basedir is accepted
* --quiet/--version is only accepted in ARG1, not ARG2
Closes#166
This should now fail quickly (during "tahoe start"). Previously this
would silently treat an unparseable size as "0", and the only way to
discover that it had had a problem would be to look at the foolscap log,
or examine the storage-service web page for the unexpected "Reserved
Size" number.
Previously, Introducers always used a swissnum of "introducer", so
anyone who could learn the (public) tubid of the introducer would be
able to connect to and use it. This changes new Introducers to use the
same randomly-generated swissnum as clients and storage servers do, so
that you absolutely must learn the introducer.furl from someone who
knows it already before you can connect.
This change also moves the location of the file that stores
introducer.furl from BASEDIR/introducer.furl to
BASEDIR/private/introducer.furl, since that's where we keep the private
things. The first time an introducer is started with the new code, it
will move any existing BASEDIR/introducer.furl into the new place.
Note that this will not change the FURL of existing introducers: it will
only affect newly created ones. When you change an introducer's FURL,
you must also update all of the nodes (clients and storage servers)
which connect to it, so upgrading it to an unguessable one isn't
something we should do automatically.
This stores the sequence number in BASEDIR/announcement-seqnum, and
increments it each time any service is published (every service
announcement is regenerated with the new sequence number). As everyone
knows, time is an illusion, and occasionally goes backwards, so a
counter is generally safer (and reveals less information about the
node).
Later, we'll improve the introducer client to tolerate rollbacks (where,
perhaps due to a VM being restarted from an earlier checkpoint, the
stored sequence number reverts to an earlier version).
I want mode="w" (i.e. text, with newline conversion) for code that
writes newline-terminated strings (which should also be human readable)
to files. I like to use things like "cat .tahoe/permutation-seed"
without seeing the seed jammed together with the next command prompt.
twisted.web.html.escape was used to produce html-encoded string (to then look
it up in "value" attribute), but behavior of that function has changed between
Twisted 12.2.0 (simple custom implementation) and 12.3.0 (imported from stdlib
cgi module).
This also simplifies how case-insensitivity is handled, and fixes a corner case
where the wrong exception was raised when the size ends in "BB".
fixes#1812
Signed-off-by: David-Sarah Hopwood <davidsarah@mint>
This contains several merged patches. Individual messages follow, latest first:
* Fix a warning from check-miscaptures.
* In retrieve.py, explicitly test whether a key is in self.servermap.proxies
rather than catching KeyError.
* Added a new comment to the MDMF version of the test I removed, explaining
the removal of the SDMF version.
* Removed test_corrupt_all_block_hash_tree_late, since the entire block_hash_tree
is cached in the servermap for an SDMF file.
* Fixed several tests that require files larger than the servermap cache.
* Remove unused test_response_cache_memory_leak().
* Exercise the cache.
* Test infrastructure for counting cache misses on MDMF files.
* Removed the ResponseCache. Instead, the MDMFSlotReadProxy initialized
by ServerMap is kept around so Retrieve can access it. The ReadProxy
has a cache of the first 1000 bytes initially read from each share by
the ServerMap. We're able to satisfy a number of requests out of this
cache, so roundtrips are reduced from 84 to 60 in test_deepcheck_mdmf.
There is still some mystery about under what conditions the cache has
fewer than 1000 bytes. Also this breaks some existing unit tests that
depend on the inner behavior of ResponseCache.
* The servermap.proxies (a cache of SlotReadProxies) is now keyed
by (verinfo,serverid,shnum) rather than just (serverid,shnum)
* Minor cosmetic changes
* Added a test failure if the number of cache misses is too high.
Author: Andrew Miller <amiller@dappervision.com>
Signed-off-by: David-Sarah Hopwood <davidsarah@jacaranda.org>
This prints out which things are different when two sets are expected to be the
same. This was useful to me when debugging the code under test. Hm, this
pattern might be more generally useful...
The unnecessary request was from the upload helper to the sender, and it was
there in order to trigger the sender to deliver cleartext hashes. But we've
long since removed cleartext hashes.
Unit tests pass both before and after this change, and code-coverage shows that
the block I changed is exercised in unit tests.
This probably only works on Linux. It uses sudo to mount and unmount the tmpfs,
which may prompt for a password. refs #20
Signed-off-by: David-Sarah Hopwood <david-sarah@jacaranda.org>
Nevow automatically HTML-escapes strings passed in stan without a raw marker.
Written by MK_FG. fixes#1143
Signed-off-by: David-Sarah Hopwood <david-sarah@jacaranda.org>
The current Twisted release is 12.1.0, which (like 12.0.0 before it)
isn't compatible with foolscap-0.6.2 and earlier. We previously required
foolscap>=0.6.1, since that's all we actually need from foolscap itself.
_auto_deps specifies twisted>=11.0.0, so any system that can't meet that
will install the current Twisted (12.1.0), which will give them
something incompatible with foolscap-0.6.1 and 0.6.2 .
If we're limited to setuptools's declarative constraint language (and
can't have a function which evaluates the available dependency versions
and gives recommendations on which to change), then the only safe
approach is to make sure that any acceptable Foolscap version will be
compatible with all acceptable Twisted versions. So, bump the foolscap
dependency to >=0.6.3, which covers all currently-known
incompatibilities.
The wait_for_connections() method, which is used at the start of
test_system to make sure that all the clients are connected to all the
servers, did not also wait for clients to be connected to their Helpers.
Every once in a while, the helper connection would take a bit longer,
and then
test_system.SystemTest.test_filesystem._test_web._got_welcome_helper
would fail, because we'd check for a helper connection before it was
ready.
The fix is to modify wait_for_connections's polling predicate to look
for helper connections (if configured) as well as the regular
introducer- and server- connections.
Tested by temporarily adding a large (30s) delay to the connectTo() call
in Uploader.startService, simulating a long helper
connection-establishment delay. This makes the test fail consistently.
Then I fixed wait_for_connections(), and the test passed (slowly). Then
I removed the delay.
Closes#1467
Improve the column headers to make it clear that this list shows Tub
IDs. (we can't show pubkey-based serverids because clients don't give
those to us: only servers provide pubkeys). This should be the only
place in the whole webapi that shows TubIDs for modern (V2-introducer)
nodes.
This makes it easy to distinguish between old V1-Introducer
nodes (identified by their Foolscap TubID) and new V2 nodes (identified
by their ed25519 pubkey).
This fixes a few places where we used to display a tubid even if we had
a pubkey, making it hard to visually correlate servers in two different
displays. It also cleans up the way we pass serverids to the JS-based
download timeline.
The "introweb" subscribed-clients list still shows tubids.
The _upload_resumable() test interrupts a Helper upload partway
through (by shutting down the Helper), then restarts the Helper and
resumes the upload. The control flow is kind of tricky: to do anything
"partway through" requires adding a hook to the Uploadable. The previous
flow depended upon a (fragile) call to self.stall(), which waits a fixed
number of seconds.
This removes one of those stall() calls (the remainder is in
test/common.py and I'll try removing it in a subsequent revision). It
also removes some now-redundant wait_for_connections() calls, since
bounce_client() doesn't fire its Deferred until the client has finished
coming back up (and uses wait_for_connections() internally to do so).
There was one corner case (where the client disconnects at just the
wrong time) that could have dropped a Deferred, leading to an Unhandled
Error. Clean up the control flow to avoid this case.
This prepares for invitation-based reciprocal-permission Accounting. In
the scheme I'm developing, nodes publish "I accept shares from Y"
messages, which are assembled into a graph, and server will accept
shares from any client node reachable in this graph. For this to work,
the serverX->clientY edge must be connectable to the serverY->clientZ
edge, which means "clientY" and "serverY" must be connected. If clientY
and serverY are two distinct keys, they must be cross-signed. Life is
easier if there's just one key "Y", rather than distinct client- and
server- keys. Calling this one key "server.privkey" would be confusing.
"node.privkey" and "node.pubkey" makes more sense.
One-server-per-node is a pretty easy restriction. Originally I was
thinking that the client.key should be provided in each webapi call,
just like a filecap is, making a single node useable by multiple users
(Accounting principals), and not providing any ambient storage
authority. But I've been unable to think of a comfortable WUI for
that (at least without requiring javascript), nor a friendly way to
transfer account authority (e.g. writecaps that include storage
authority). So I'm more willing to have one-client-per-node these days.
(and note that this rename doesn't seriously preclude
many-clients-per-node or zero-clients-per-node anyways, it just makes
one-client-per-node less awkward)
