A minimally-defined static server only specifies server_id,
anonymous-storage-FURL, and permutation-seed-base32. But the WUI Welcome
page wouldn't render (it raised an exception) without also defining
nickname and version. This allows those values to be missing.
This follows the latest comments in ticket:2788, moving the static
server definitions from "connections.yaml" to "servers.yaml". It removes
the "connections" and "introducers" blocks from that file, leaving it
responsible for just static servers (I think connections and introducers
can be configured from tahoe.cfg).
This feeds all the static server specs to the StorageFarmBroker in a
single call, rather than delivering them as simulated introducer
announcements. It cleans up the way handlers are specified too (the
handler dictionary is ignored, but that will change soon).
They're the same thing, but knowing that is the responsibility of the
caller, not NativeStorageServer. Try to normalize on "server_id" as the
spelling. Remove support for missing key_s, now that we require V2
introductions.
This is a change I've wanted to make for many years, because when we get
to HTTP-based servers, we won't have tubids for them. What held me back
was that there's code all over the place that uses the serverid for
various purposes, so I wasn't sure it was safe. I did a big push a few
years ago to use IServer instances instead of serverids in most
places (in #1363), and to split out the values that actually depend upon
tubid into separate accessors (like get_lease_seed and
get_foolscap_write_enabler_seed), which I think took care of all the
important uses.
There are a number of places that use get_serverid() as dictionary key
to track shares (Checker results, mutable servermap). I believe these
are happy to use pubkeys instead of tubids: the only thing they do with
get_serverid() is to compare it to other values obtained from
get_serverid(). A few places in the WUI used serverid to compute display
values: these were fixed.
The main trouble was the Helper: it returns a HelperUploadResults (a
Copyable) with a share->server mapping that's keyed by whatever the
Helper's get_serverid() returns. If the uploader and the helper are on
different sides of this change, the Helper could return values that the
uploader won't recognize. This is cosmetic: that mapping is only used to
display the upload results on the "Recent and Active Operations" page.
I've added code to StorageFarmBroker.get_stub_server() to fall back to
tubids when looking up a server, so this should still work correctly
when the uploader is new and the Helper is old. If the Helper is new and
the uploader is old, the upload results will show unusual server ids.
refs ticket:1363
This re-factors the magic-folder tests to abstract
the whole "do a file operation" so we can properly
send fake (or wait for real) inotify events to the
uploader/downloader. This speeds up the tests quite
a bit and makes test_alice_bob reasonable again (at
about 1.5s instead of over 30s).
We no longer need the complexity of choosing the application name at
runtime. This removes the setup.py code which populates the _appname.py
file, and the code in __init__.py which reads it. It does not yet remove
the tests which compare the output of e.g. `tahoe --version` against
`allmydata.__appname__`, which I think could be removed, but that's more
invasive than I want to do right now.
closes ticket:2754
This doesn't reveal very much information, but does tell
you if magic-folder is currently working and if not it will
indicate when the last attempt to do a remote scan was.
Improve error-handling for directories if you ask for JSON from
the /uri endpoint, but an error occurs (you get a proper HTTP
status code and a valid JSON object).
For 'tahoe magic-folder status' e now retrieve *all* the remote data
required in the CLI before doing anything else so that errors can be
shown immediately. Use the improved JSON endpoints to print better
errors.
This keeps re-trying the initial magic-folder scan and alerts
the user (via logs only :/) until it succeeds at least once.
After this happens and the node has started up, it will continue
to re-try if enough storage servers go away later such that the
remote collection can't be retrieved.
Previously, this file importing "allmydata.immutable" but assuming that
"allmydata.immutable.upload" was available, which only worked if some
other file had imported upload.py . This didn't affect running the
entire test suite (something imported upload.py before anything else
needed it), but caused errors when running specific tests like
test_repairer.py .
I can't currently test this (my OS-X laptop can't run those tests), but
based on how much time test_magic_folder takes on the buildbots, I
expect oneshare=True to help considerably.
This saves more time (as measured on my laptop):
* test_sftp: 17.7s -> 13s
* test_dirnode: 26.5s -> 20s
* test_ftp, test_configutil, test_web show negligible speedups
As before, some tests care about the number of shares, generally ones
which delete or corrupt shares and then expect to see the errors get
noticed or fixed. Those tests continue to use k=3/N=10.
Most of the CLI tests don't care about the actual shares. Configuring
the test client to use k=N=1 reduces the runtime from 180s to 90s on my
laptop.
A few tests *do* care, like test_check (which delete some shares, then
assert that 'tahoe check' shows the damage). These still use k=3/N=10.
Many of the test cases would exercise two copies of each file: one with
k=3/N=10, and a second with k=127/N=255 (255 being the maximum supported
by zfec).
Large number of shares increases the overhead of the testing apparatus,
which is pushing those shares to lots of local servers.
I don't think the "max_shares" case is necessary, and it takes forever.
Because of it, "mutable.Update" was consuming 15% of the total test
runtime, and a third of that was just a single
function (test_replace_locations_max_shares, now deleted). On a
Raspberry Pi 3 (our "slow computer" benchmark), including branch
coverage, this one class took 42 minutes to complete, and requires
disabling a bunch of timeouts to finish at all.
The total number of shares in a file ("N") affects one thing: the
width (and thus height) of the share hash tree. This should be exercised
in test_hashtree.
The number of required shares ("k") affects one thing: the segment size
must be a multiple of k. I don't think we need to exercise this, but if
so, it could be exercised by a few small values for k, rather than 127.
Removing the max_shares cases saves 82% of the mutable.update
runtime (on top of the previous three-segment fix), reducing it from 64s
to 11.3s on my laptop.
* uses @inlineCallbacks to turn the _lazy_tail recursion into
a "real" looking loop;
* remove the need for "immediate" vs delayed iteration of said loop;
* make it easier for the unit-tests to control the behavior of the
uploader/downloader;
* consolidates (some) setup/teardown code into the setUp and tearDown
hooks provided by unittest so unit-tests aren't doing that themselves
* re-factors some of the unit-tests to use an @inlineCallbacks style
so they're easier to follow and debug
This doesn't tackle the "how to know when our inotify events have arrived"
problem the unit-tests still have, nor does it eliminate the myriad bits
of state that get added to tests via all the MixIns.
Adds:
- a JSON endpoint
- CLI to display information
- QueuedItem + IQueuedItem for uploader/downloader
- IProgress interface + PercentProgress implementation
- progress= args to many upload/download APIs
This gives the integration-style CLI-based tests a chance
to set the delay to 0 before the first 3-second delayed
call is queued to _lazy_tail in the Downloader
1. Split alice/bob clocks to avoid races conditions
in the tests
2. Wrap ._notify so we can advance the clock after inotify
calls in the RealTest (since it takes >0ms to do the "real" notifies)
The yaml.SafeLoader.add_constructor() should probably only be done once,
and moving this all into a module gives us an opportunity to test it
directly.
Without these, clients with a non-empty connections.yaml would crash as
they start up. It's safe to say we need some tests for this :-).
pyflakes catches all of these, but it got accidentally disabled
recently, so travis wasn't running it. I'll fix that in the next commit.
This also removes the tahoe.cfg keys that would have configured the
control-port. And it deletes the logport.furl file before asking the Tub
to re-create it, because we're now using an ephemeral Tub (so we're not
persisting the private key, so the tubid will change each time).
closes ticket:2794
The old copy had a bug which occasionally returns a port that was
actually in use, causing intermittent test failures (when large numbers
of ports were allocated). I finally figured out how to fix it in
Foolscap, so this is just a copy of the updated function.
closes ticket:2795
Historical note: V2 introducers have been around for three years
now (released in 1.10.0), so it's time to drop v1. This branch removes a
lot of fallback code, and tests which exercised it. refs ticket:2784
This patch removes some now-unused code: v1-related support functions on
the client, "stub-client" handlers, and v1-tolerant remote methods on
the server. The unit tests have been cleaned up a bit too, now that
there are fewer cases to exercise.
* use yaml.safe_load and yaml.safe_dump
* configure SafeLoader to return unicode consistently, not str
* log+ignore bad cache, instead of throwing error, since we're already
in the log+ignore chain from connect_failed()
* use a local exception type, instead of one from storage_client.py
* delegate delivery to self._deliver_announcements
Using yaml.safe_dump gives us:
- ann:
my-version: tahoe-lafs/1.11.0.post96.dev0
nickname: node-4
instead of:
- ann:
!!python/unicode 'my-version': !!python/unicode 'tahoe-lafs/1.11.0.post96.dev0'
!!python/unicode 'nickname': !!python/unicode 'node-4'
We want SafeLoader to consistently return unicode instead of sometimes
plain strings (for ASCII-safe values) and sometimes unicode
(for everything else). The data we write into the cache was all unicode
to start with (it came from a JSON parser), so it seems better to get
back unicode too.
* Use tempfile for cache to avoid collisions
* Fix pyflakes complaints
* Remove test_client_cache_2, which exercises unsigned announcements.
These are scheduled to be removed soon (see ticket:2784) and don't
need to be tested.
* don't remove the cache at connection establishment, we can just wait
for the first announcement to truncate the cache
* save announcements before notifying subscribers, so they can safely
read it right away
* remove unused self._got_announcement_cb
Run with "tox -e coverage". Uses a new helper
module (allmydata.test.run_trial) to let us import+execute trial without
knowing exactly where the "trial" binary lives, which helps with using
"coverage run" under tox.
This makes IServer instances responsible for their own network
connections, which will help when we add HTTP-based servers in the
future. The StorageFarmBroker should not care about how the IServer uses
the network, it just provides the announcement (and local config).
This fixes some of the upcoming-deprecation warnings against Foolscap
(>=0.11.0). There are still a bunch related to the key-generator and the
stats gatherer.
This avoids a privacy leak when the web.static= directory is configured
but doesn't exist (which is almost always, since we set `web.static =
public_html` in the default config file, but nothing automatically
creates it). The nevow.static.File class tries to os.stat() the
directory before doing anything else, which causes an exception, which
renders the traceback to the HTTP client as a 500 Internal Server Error,
and the traceback includes the full path of the missing public_html
directory, which reveals the node's basedir.
Plain twisted.web.static.File doesn't do this check, and a missing
web.static directory just results in a plain old 404.
Closes ticket:1720.
This can be done synchronously because we now know the port number
earlier. This still uses get_local_addresses_sync() (not _async) to do
automatic IP-address detection if the config file didn't set
tub.location or used the special word "AUTO" in it.
The new implementation slightly changes the mapping from tub.location to
the assigned location string. The old code removed all instances of
"AUTO" from the location and then extended the hints with the local
ones (so "hint1:AUTO:hint2" turns into "hint1:hint2:auto1:auto2"). The
new code exactly replaces each "AUTO" with the local hints (so that
example turns into "hint1:auto1:auto2:hint2", and a silly
"hint1:AUTO:AUTO" would turn into "hint1:auto1:auto2:auto1:auto2"). This
is unlikely to affect anybody.
This is the first step towards making node startup be synchronous: the
tub.port is entirely determined (including any TCP port allocation that
might be necessary) before creating the Tub, so the portnumber part of
FURLs can be determined earlier.
This test was depending upon the storage announcement happening *after*
startup, but the upcoming synchronous-Tub-startup change will modify the
ordering. Fix it in both cases by disabling storage in the client being
tested.
This has worked so far because everything waited for the Tub to be
ready. We'll soon be making Tub setup synchronous, so we won't have to
wait anymore, so the order will matter.
This reverts commit bb7184163e.
We changed test_runner.BinTahoe.run_bintahoe since this commit landed:
the new version can no longer cause the test to be skipped late (we've
gotten rid of the bin/tahoe script entirely, so it's no longer possible
for us to miss it). Hence I think we don't need this unsightly stall any
longer.
Meejah pointed out that new users might think the encoding parameters
are fixed, something you must pick correctly when you first set up the
node, and then are never allowed to change again, which is kind of
anxiety-inducing. This updates the comment to explain that the encoding
is stored in each filecap, and the tahoe.cfg values are only used for
newly-uploaded files.
I set up a raspberry pi buildslave (which, on the "raspbian jesse"
image, uses a 32-bit python, and perhaps a 32-bit kernel too). It fails
test_util.TimeFormat.test_format_time_y2038 with a ValueError inside the
call to time.gmtime(). The test was looking for the equality check to
fail instead. I think catching ValueError is the more-correct way to
detect a system with a 32-bit time type.
With the new Foolscap-0.11.0 (which changed the way connections are
established), I'm seeing DirtyReactorErrors getting thrown by
allmydata.test.test_system.SystemTest.test_filesystem_with_cli_in_subprocess
, on a host that has three IP addresses (one is 127.0.0.1, two is wifi,
three is a VPN). The test itself is getting skipped because bin/tahoe
isn't in the expected place, but by that point, the nodes have already
been launched and have established connections over one of the three
hints (probably 127.0.0.1). The test terminates so quickly that the
connections to the other two addresses have not finished being
abandoned. The extra stall seems to give Foolscap enough time to reap
the cancelled connections and makes the DRT go away.
I think an offline test, or maybe one with a single external IP address,
wouldn't hit this case.
Arbitrary stalls are never very satisfactory, of course. Usually there
is some threshold delay value, below which it fails reliably, above
which it works on my own machine (for now). This one is weird: the
threshold seems to be below the resolution of the system clock. Stalling
for one nanosecond was enough to fix the problem, but using a simple
fireEventually() didn't work.
This little-used debugging feature allowed you to SSH or Telnet "into" a
Tahoe node, and get an interactive Read-Eval-Print-Loop (REPL) that
executed inside the context of the running process. The SSH
authentication code used a deprecated feature of Twisted, this code had
no unit-test coverage, and I haven't personally used it in at least 6
years (despite writing it in the first place). Time to go.
Also experiment with a Twisted-style "topfiles/" directory of NEWS
fragments. The idea is that we require all user-visible changes to
include a file or two (named as $TICKETNUM.$TYPE), and then run a script
to generate NEWS during the release process, instead of having a human
scan the commit logs and summarize the changes long after they landed.
Closes ticket:2367
The udpprot.transport.connect() fails if we don't have a network
connection, but the port is still listening, so trial gives us a
DirtyReactorError. The fix is a "finally:" which does
port.stopListening() even in this case.
Closes ticket:2769
We only really need "Twisted >= 13.0.0", but we must add "[tls]" because
otherwise pip won't install it when Foolscap asks for it later, and we
need ">= 15.1.0" because that's the first version that provided "[tls]".
Fixes ticket:2760.
Thanks to dstufft for the suggestion. I know this can make it slightly
easier to run tahoe in some funny environments (where an appropriate
"python" is on your path but the generated "tahoe" executable is not).
Our install_requires= want foolscap>=0.10.1, and this check only fired
if we were given <0.6.4, so the check should be obsolete.
Also, the check was breaking my attempt to test Tahoe against a
development release of Foolscap, as the NormalizedVersion call threw an
IrrationalVersionError at my Versioneer-based "0.10.1+14.g37d8279"
version string.
This was used to exercise our old virtualenv-like scheme. Now that we
use virtualenv, they're unnecessary. Plus, removing it lets us stop
polluting end-user installs with the extra package (that might
conceivably conflict with some other project that names itself
"buildtest").
This allows a python3-based "tox" (as shipped with modern debian and
ubuntu systems) to run setup.py egg_info, update_version, and sdist
commands. It moves the main "tahoe requires py2" check out of setup.py
and into allmydata.scripts.runner.run, where it gets applied at runtime
rather than build time.
It also changes the execfile(_auto_deps.py) and Versioneer-like "ask git
what our version string should be" code to work under both py2 and py3.
fixes ticket:2747
We don't necessarily need this ourselves (__init__.py's version-checking
code is the only thing in tahoe per se that uses setuptools, and our
setup.py's use of setuptools isn't something that install_requires= can
say anything about). But at least one old environment failed because a
sub-dependency needed a newer version than Tahoe asked for. I'm not sure
if this ought to be here, but it may help for a transitional period
until these ancient environments get updated.
closes ticket:2744
20.3 is the current version as of today. I'm not really sure what
version we need, but this is better than the previous zetuptoolz "0.6c6"
requirement. Closes ticket:2744.
With our new tox/pip/virtualenv -based environment, we no longer need
the bin/tahoe script, so the tests that examine it needed to change.
In particular, we no longer need to be running tests from the root of a
source tree. Instead, what we care about is that the subprocess 'tahoe'
is importing code from the same place that the unit test .py files live.
NumDict does not make any claims about the order of its repr(), so the
test needs to be prepared for it to be stringified in any order. On unix
the old test happened to pass, but on certain windows boxes (maybe
certain versions of python?), it failed. Fixes ticket:2736.
I'm not sure why this ever existed, but it doesn't appear to be used.
(If an introducer called a client's set_encoding_parameters method it would
keep the provided parameters in an instance attribute but would not actually
use them.)
As discussed at https://tahoe-lafs.org/trac/tahoe-lafs/ticket/1973 and in
previous pull request #129.
- replace lengthy timestamps with human-readable deltas (eg 1h 2m 3s)
- replace "announced" column with "Last RX" column
- remove service column (it always said the same thing, "storage")
- fix colspan on 'You are not presently connected' message
Previous versions, some with github comments: 3fe9053134 , 486dbfc7bd , and c89ea62580, 9fabb92486, bbd8b42a25
Unlike previous attempts, the tests on this one should pass in any timezone.
(But like current master, will fail with Nevow >=0.12...)
Thanks to an anonymous contributor who wrote some of the tests.
As discussed at https://tahoe-lafs.org/trac/tahoe-lafs/ticket/1973 and in
previous pull request #129.
- replace lengthy timestamps with human-readable deltas (eg 1h 2m 3s)
- replace "announced" column with "Last RX" column
- remove service column (it always said the same thing, "storage")
- fix colspan on 'You are not presently connected' message
Previous versions, some with github comments: 3fe9053134 , 486dbfc7bd , and c89ea62580, 9fabb92486, bbd8b42a25
Unlike previous attempts, the tests on this one should pass in any timezone.
(But like current master, will fail with Nevow >=0.12...)
Thanks to an anonymous contributor who wrote some of the tests.
this includes a squash merge of dca1de6856 which
was previously seen in pull request #128, as well as daira's suggested changes
from pull request #204.
A long time ago, the introducer's status web page would show the
advertised IP addresses for all published services, by parsing their
FURL's connection hints. This hasn't worked since about 12-Aug-2014 when
foolscap-0.6.5 changed the internal format of these hints (the column
has been empty this whole time).
This removes the "Advertised IPs" column from the Service Announcements
table. Instead, the service's full connection hints (not just the IP
address) is displayed in a tooltip/popup on the "Announced" timestamp
column.
The code that pulls these connection hints is now tolerant of all three
foolscap styles:
* foolscap<=0.6.4 : tuples of ("ipv4",host,port)
* 0.6.5 .. 0.8.0 : tuples of ("tcp",host,port)
* foolscap>=0.9.0 : strings
fixes ticket:2510
The machine-parseable JSON output for the introducer status web page
used to include a key named "announcement_distinct_hosts", which counted
the number of distinct IP addresses advertised by all connected storage
servers. This hasn't worked since Aug-2014 when foolscap-0.6.5 change
the internal hints format.
This removes that field.
A long time ago, the introducer's status web page would show the
advertised IP addresses for all subscribers, by parsing their
RemoteReference's FURL's connection hints. This hasn't worked since
about 12-Aug-2014 when foolscap-0.6.5 changed the internal format of
these hints.
This removes the feature: we no longer attempt to show advertised IP
addresses of subscribed clients. It also removes the code that looked
inside foolscap internals for this information.
The previous version would incorrectly add to the output of
get_package_versions_string each time it was called.
Signed-off-by: Daira Hopwood <daira@jacaranda.org>
This should tolerate offset/size combinations that read the last byte of
the file, something which was broken before. It quits early in the case
of zero-byte reads, to simplify the resulting "which segments do I need"
logic. Probably addresses ticket:2459.
test_cli.Help was too sensitive to the way that the --help output was
wrapped, which caused failures on travis when COLUMNS= was set low and
the expected strings were split across separate lines.
Also:
* do some light refactoring of create-client/node
* make it clear that these commands' --basedir options do the same as
the global --node-directory option
* use "global-options" instead of "global-opts"
Subcommands "--help" is now rendered as:
```
tahoe [global-options] COMMAND [options] ARGS
(use 'tahoe --help' to view global options)
USAGE (flags/options)
DESCRIPTION
DESCRIPTION_UNWRAPPED
```
The new .description and .description_unwrapped fields allow
commands (subclasses of twisted.python.usage.Usage) better control over
how their explanations are rendered: the old .longdesc field was wrapped
unpleasantly.
