tahoe-lafs/docs/webapi.txt

== connecting to the tahoe node ==

Writing "8011" into $NODEDIR/webport causes the node to run a webserver on
port 8011. Writing "tcp:8011:interface=127.0.0.1" into $NODEDIR/webport does
the same but binds to the loopback interface, ensuring that only the programs
on the local host can connect. Using
"ssl:8011:privateKey=mykey.pem:certKey=cert.pem" would run an SSL server. See
twisted.application.strports for more details.

If $NODEDIR/webpassword exists, it will be used (somehow) to require HTTP
Digest Authentication for all webserver connections.  XXX specify how


== vdrive ==

The node provides some small number of "virtual drives". In the 0.5
release, this number is two: the first is the global shared vdrive, the
second is the private non-shared vdrive. We will call these "global" and
"private" for now.

For the purpose of this document, let us assume that the vdrives currently
contain the following directories and files:

 global/
 global/Documents/
 global/Documents/notes.txt

 private/
 private/Pictures/
 private/Pictures/tractors.jpg


Within the webserver, there is a tree of resources. The top-level "vdrive"
resource gives access to files and directories in all of the user's virtual
drives. For example, the URL that corresponds to notes.txt would be:

http://localhost:8011/vdrive/global/Documents/notes.txt

and the URL for tractors.jpg would be:

http://localhost:8011/vdrive/private/Pictures/tractors.jpg

In addition, each directory has a corresponding URL. The Pictures URL is:

http://localhost:8011/vdrive/private/Pictures

Now, what can we do with these URLs? By varying the HTTP method
(GET/PUT/POST/DELETE) and by appending a type-indicating query argument, we
control how what we want to do with the data and how it should be presented.


=== files and directories by name ===

In the following examples "$URL" is a shorthand for a URL like the ones
described above, with "vdrive/" as the top level, followed by a
slash-separated sequence of file or directory names.  "$NEWURL" is a
shorthand for a URL pointing to a location in the vdrive where currently
nothing exists.

 GET $URL

  If the given place in the vdrive contains a file, then this simply
  retrieves the contents of the file.  The Content-Type is set according to
  the vdrive's metadata (if available) or by using the usual
  filename-extension-magic built into most webservers. The file's contents
  are provided in the body of the HTTP response.

  If the given place contains a directory, then this returns an HTML page,
  intended to be used by humans, which contains HREF links to all files and
  directories reachable from this dirnode. These HREF links do not have a t=
  argument, meaning that a human who follows them will get pages also meant
  for a human. It also contains forms to upload new files, and to delete
  files and directories. These forms use POST methods to do their job.

  You can add the "save=true" argument, which adds a 'Content-Disposition:
  attachment' header to prompt most web browsers to save the file to disk
  rather than attempting to display it.

 GET $URL?t=json

  This returns machine-parseable information about the named file or
  directory in the HTTP response body.  This information contains a flag that
  indicates whether the thing is a file or a directory.

  If it is a file, then the information includes file size, metadata (like
  Content-Type), and URIs, like this:

   [ 'filenode', { 'mutable': bool, 'uri': file_uri, 'size': bytes } ]

  If it is a directory, then it includes a flag to indicate whether this is a
  read-write dirnode or a read-only dirnode, and information about the
  children of this directory, as a mapping from child name to a set of
  metadata about the child (the same data that would appear in a
  corresponding GET?t=json of the child itself).  Like this:

   [ 'dirnode', { 'mutable': bool, 'uri': uri, 'children': children } ]

   where 'children' is a dictionary in which the keys are child names
   and the values depend upon whether the child is a file or a directory:

     'foo.txt': [ 'filenode', { 'mutable': bool, 'uri': uri, 'size': bytes } ]
     'subdir':  [ 'dirnode', { 'mutable': bool, 'uri': uri } ]

   note that the value is the same as the JSON representation of the
   corresponding FILEURL or DIRURL (except that dirnodes do not recurse --
   the "children" entry of the child is omitted).

   Before writing code that uses these results, please see the important note
   below about TOCTTOU bugs.

 GET $URL?t=uri

  This returns the URI of the given file or directory in the HTTP response
  body.  If you have read-write access to that resource then this returns a
  URI which provides read-write access.  If you have read-only access to that
  resource then this returns a URI which provides read-only access.

 GET $URL?t=readonly-uri

  This returns the URI providing read-only access to the given file or
  directory (whether or not you have read-only or read-write access).
  (Currently all files are immutable so everyone has read-only access to all
  files.)

 PUT $URL?t=uri

  This attaches a child (either a file or a directory) to the vdrive at the
  given location. The URI of the child is provided in the body of the HTTP
  request. This can be used to attach a shared directory to the
  vdrive. Intermediate directories are created on-demand just like with the
  regular PUT command.

 DELETE $URL

  This deletes the given file or directory from the vdrive.  If it is a
  directory then this deletes all of its chilren.  Note that this *does not*
  delete any parent directories, so a sequence of 'PUT $NEWURL' and 'DELETE
  $NEWURL' does not necessarily return the vdrive to its original state (it
  may leave some intermediate directory nodes).


=== files by name ===

 PUT $NEWURL

  This uploads a file to the given place in the vdrive. It will create
  intermediate directory nodes as necessary. The file's contents are taken
  from the body of the HTTP request. For convenience, the HTTP response
  contains the URI that results from uploading the file, although the node
  is not obligated to do anything with the URI. According to the HTTP/1.1
  specification (rfc2616), this should return a 200 (OK) code when modifying
  an existing file, and a 201 (Created) code when creating a new file.

  To use this, run 'curl -T localfile http://localhost:8011/vdrive/global/newfile'


=== directories by name ===

 PUT $NEWURL?t=mkdir

  Create a new empty directory at the given path. The HTTP response contains
  the URI of the given directory, although the client is not obligated to do
  anything with it.

 GET $URL?t=rename-form&name=$CHILDNAME

  This provides a useful facility to browser-based user interfaces.  It
  returns a page containing a form targetting the "POST $URL t=rename"
  functionality described below, with the provided $CHILDNAME present in the
  'from_name' field of that form.  I.e. this presents a form offering to
  rename $CHILDNAME, requesting the new name, and submitting POST rename.


== URIs ==

A separate top-level resource namespace ("uri/" instead of "vdrive/") is used
to get access to files and dirnodes that are indexed directly by URI, rather
than by going through the vdrive. The resource thus referenced is used the
same way as if it were accessed through the vdrive (including accessing a
directory's children with "$URI/childname").

For example, this identifies a file or directory:

http://localhost:8011/uri/$URI

And this identifies a file or directory "foo" in a subdirectory "somedir" of
the identified directory:

http://localhost:8011/uri/$URI/somedir/foo

In the following examples, "$URI_URL" is a shorthand for a URL like the one
above, with "uri/" as the top level, followed by a URI.

Note that since tahoe URIs may contain slashes (in particular, dirnode URIs
contain a FURL, which resembles a regular HTTP URL and starts with pb://),
when URIs are used in this form, they must be specially quoted. All slashes
in the URI must be replaced by '!' characters.  XXX consider changing the
allmydata.org uri format to relieve the user of this requirement.

 GET $URI_URL

  This behaves the same way that a "GET $URL" does, described in the "files
  and directories" section above.  The difference is that which file or
  directory you get does not depend on the contents of parent directories as
  it does with the name-based URLs, since a URI uniquely identifies an object
  regardless of its location.

  Since files accessed this way do not have a filename (from which a
  MIME-type can be derived), one can be specified using a 'filename=' query
  argument. This filename is also the one used if the 'save=true' argument is
  set.

 GET http://localhost:8011/uri?uri=$URI

  This causes a redirect to /uri/$URI, and retains any additional query
  arguments (like filename= or save=). This is for the convenience of web
  forms which allow the user to paste in a URI (obtained through some
  out-of-band channel, like IM or email).

  Note that this form only redirects to the specific node indicated by the
  URI: unlike the GET /uri/$URI form, you cannot traverse to child nodes by
  appending additional path segments to the URL.

  The $URI provided as a query argument is allowed to contain slashes. The
  redirection provided will escape the slashes with exclamation points, as
  described above.


== TOCTTOU bugs ==

Note that since directories are mutable you can get surprises if you query
the vdrive, e.g. "GET $URL?t=json", examine the resulting JSON-encoded
information, and then fetch from or update the vdrive using a name-based URL.
This is because the actual state of the vdrive could have changed after you
did the "GET $URL?t=json" query and before you did the subsequent fetch or
update.

For example, suppose you query to find out that "vdrive/private/somedir/foo"
is a file which has a certain number of bytes, and then you issue a "GET
vdrive/private/somedir/foo" to fetch the file.  The file that you get might
have a different number of bytes than the one that you chose to fetch,
because the "foo" entry in the "somedir" directory may have been changed to
point to a different file between your query and your fetch, or because the
"somedir" entry in the private vdrive might have been changed to point to a
different directory.

Potentially more damaging, suppose that the "foo" entry was changed to point
to a directory instead of a file.  Then instead of receiving the expected
file, you receive a file containing an HTML page describing the directory
contents!

These are examples of TOCTTOU bugs ( http://en.wikipedia.org/wiki/TOCTTOU ).

A good way to avoid these bugs is to issue your second request, not with a
URL based on the sequence of names that lead to the object, but instead with
the URI of the object.  For example, in the case that you query a directory
listing (with "GET vdrive/private/somedir?t=json"), find a file named "foo"
therein that you want to download, and then download the file, if you
download it with its URI ("GET uri/$URI") instead of its URL ("GET
vdrive/private/somedir/foo") then you will get the file that was in the
"somedir/" directory under the name "foo" when you queried that directory,
even if the "somedir/" directory has since been changed so that its "foo"
child now points to a different file or to a directory.

In general, use names if you want "whatever object (whether file or
directory) is found by following this sequence of names when my request
reaches the server".  Use URIs if you want "this particular object".

If you are basing your decision to fetch from or update the vdrive on
filesystem information that was returned by an earlier query, then you
usually intend to fetch or update the particular object that was in that
location when you queried it, rather than whatever object is going to be in
that location when your request reaches the server.


== POST forms ==

 POST $URL
  t=upload
  name=childname  (optional)
  file=newfile
 
  This instructs the node to upload a file into the given dirnode. We need
  this because forms are the only way for a web browser to upload a file
  (browsers do not know how to do PUT or DELETE). The file's contents and the
  new child name will be included in the form's arguments. This can only be
  used to upload a single file at a time. To avoid confusion, name= is not
  allowed to contain a slash (a 400 Bad Request error will result).

 POST $URL
  t=mkdir
  name=childname

  This instructs the node to create a new empty directory. The name of the
  new child directory will be included in the form's arguments.

 POST $URL
  t=uri
  name=childname
  uri=newuri

  This instructs the node to attach a child that is referenced by URI (just
  like the PUT $URL?t=uri method). The name and URI of the new child
  will be included in the form's arguments.

 POST $URL
  t=delete
  name=childname

  This instructs the node to delete a file from the given dirnode. The name
  of the child to be deleted will be included in the form's arguments.

 POST $URL
  t=rename
  from_name=oldchildname
  to_name=newchildname

  This instructs the node to rename a child within the given dirnode. The
  child specified by 'from_name' is removed, and reattached as a child named
  for 'to_name'.  This is unconditional and will replace any child already
  present under 'to_name', akin to 'mv -f' in unix parlance.


== XMLRPC ==

 http://localhost:8011/xmlrpc

  This resource provides an XMLRPC server on which all of the previous
  operations can be expressed as function calls taking a "pathname" argument.
  This is provided for applications that want to think of everything in terms
  of XMLRPC.

   listdir(vdrivename, path) -> dict of (childname -> (stuff))
   put(vdrivename, path, contents) -> URI
   get(vdrivename, path) -> contents
   mkdir(vdrivename, path) -> URI
   put_localfile(vdrivename, path, localfilename) -> URI
   get_localfile(vdrivename, path, localfilename)
   put_localdir(vdrivename, path, localdirname)   # recursive
   get_localdir(vdrivename, path, localdirname)   # recursive
   put_uri(vdrivename, path, URI)

   etc..