serval-dna/tests/rhizomeprotocol

#!/bin/bash

# Tests for Serval rhizome protocol.
#
# Copyright 2012 Serval Project Inc.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.

source "${0%/*}/../testframework.sh"
source "${0%/*}/../testdefs.sh"
source "${0%/*}/../testdefs_rhizome.sh"

shopt -s extglob

finally() {
   stop_all_servald_servers
}

teardown() {
   kill_all_servald_processes
   assert_no_servald_processes
   report_all_servald_servers
}

# Called by start_servald_instances for each instance.
configure_servald_server() {
   executeOk_servald config set log.show_pid on
   executeOk_servald config set log.show_time on
   executeOk_servald config set debug.rhizome on
   executeOk_servald config set debug.rhizometx on
   executeOk_servald config set debug.rhizomerx on
   executeOk_servald config set server.respawn_on_crash off
   executeOk_servald config set mdp.iftype.wifi.tick_ms 500
   executeOk_servald config set mdp.selfannounce.ticks_per_full_address 1
}

setup_curl_7() {
   case "$(curl --version | tr '\n' ' ')" in
   curl\ @(7|8|9|[1-9][0-1]).*\ Protocols:*\ http\ *) ;;
   '') fail "curl(1) command is not present";;
   *) fail "curl(1) version is not adequate (expecting 7 or higher)";;
   esac
   unset http_proxy
   unset HTTP_PROXY
   unset HTTPS_PROXY
   unset ALL_PROXY
}

setup_common() {
   setup_servald
   assert_no_servald_processes
   foreach_instance +A +B create_single_identity
   set_instance +B
}

doc_FileTransfer="New bundle and update transfer to one node"
setup_FileTransfer() {
   setup_common
   set_instance +A
   rhizome_add_file file1
   start_servald_instances +A +B
   foreach_instance +A assert_peers_are_instances +B
   foreach_instance +B assert_peers_are_instances +A
}
test_FileTransfer() {
   wait_until bundle_received_by $BID:$VERSION +B
   set_instance +B
   executeOk_servald rhizome list ''
   assert_rhizome_list --fromhere=0 file1
   assert_rhizome_received file1
   set_instance +A
   rhizome_update_file file1 file2
   set_instance +B
   wait_until bundle_received_by $BID:$VERSION +B
   executeOk_servald rhizome list ''
   assert_rhizome_list --fromhere=0 file2
   assert_rhizome_received file2
}

doc_FileTransferBig="Big new bundle transfers to one node"
setup_FileTransferBig() {
   setup_common
   set_instance +A
   dd if=/dev/urandom of=file1 bs=1k count=1k 2>&1
   echo x >>file1
   ls -l file1
   rhizome_add_file file1
   start_servald_instances +A +B
   foreach_instance +A assert_peers_are_instances +B
   foreach_instance +B assert_peers_are_instances +A
}
test_FileTransferBig() {
   wait_until bundle_received_by $BID:$VERSION +B
   set_instance +B
   executeOk_servald rhizome list ''
   assert_rhizome_list --fromhere=0 file1
   assert_rhizome_received file1
}

doc_FileTransferMulti="New bundle transfers to four nodes"
setup_FileTransferMulti() {
   setup_common
   set_instance +A
   rhizome_add_file file1
   start_servald_instances +A +B +C +D +E
   foreach_instance +A assert_peers_are_instances +B +C +D +E
   foreach_instance +B assert_peers_are_instances +A +C +D +E
   foreach_instance +C assert_peers_are_instances +A +B +D +E
   foreach_instance +D assert_peers_are_instances +A +B +C +E
}
test_FileTransferMulti() {
   wait_until bundle_received_by $BID:$VERSION +B +C +D +E
   for i in B C D E; do
      set_instance +$i
      executeOk_servald rhizome list ''
      assert_rhizome_list --fromhere=0 file1
      assert_rhizome_received file1
   done
}

doc_FileTransferDelete="Payload deletion transfers to one node"
setup_FileTransferDelete() {
   setup_common
   set_instance +A
   rhizome_add_file file1
   start_servald_instances +A +B
   foreach_instance +A assert_peers_are_instances +B
   foreach_instance +B assert_peers_are_instances +A
   wait_until bundle_received_by $BID:$VERSION +B
   set_instance +A
   >file1_2
   rhizome_update_file file1 file1_2
}
test_FileTransferDelete() {
   wait_until bundle_received_by $BID:$VERSION +B
   set_instance +B
   executeOk_servald rhizome list ''
   assert_rhizome_list --fromhere=0 file1_2
   assert_rhizome_received file1_2
}

doc_HttpImport="Import bundle using HTTP POST multi-part form."
setup_HttpImport() {
   setup_curl_7
   setup_common
   cat >README.WHYNOTSIPS <<'EOF'
When we were looking at implementing secure calls for OpenBTS it was suggested
that we configure Asterisk to use SIPS/ZRTP. This would have been relatively
easy to setup, however there are a few problems.
.
Number one is that when Asterisk checks the certificates it will either
validate the certificate (checking the chain of trust and so on) and then
check that the common name attribute on the certificate matches the hostname
of the peer, or it will do none of these checks. This code is in main/tcptls.c
line 206 (in version 1.8.14.1).
.
This is undesirable in a setup where there is limited or no infrastructure as
there is not likely to be a DNS server setup, or even rigid IP assignments
that would allow a static hosts file based setup. This situation would force
the administrator to disable the checks completely which would allow a trivial
man in the middle attack.
.
It would be possible to modify Asterisk to have a third way where it validates
the certificate and checks the chain of trust but does not look at the common
name. We decided against this approach as the VOMP channel driver was written
in time to avoid it.
EOF
   set_instance +B
   executeOk_servald rhizome add file $SIDB '' README.WHYNOTSIPS README.WHYNOTSIPS.manifest
   assert_manifest_complete README.WHYNOTSIPS.manifest
   assert_stdout_add_file README.WHYNOTSIPS
   set_instance +A
   start_servald_instances +A
   wait_until rhizome_http_server_started +A
   get_rhizome_server_port PORTA +A
}
test_HttpImport() {
   executeOk curl \
         --silent --fail --show-error \
         --output http.output \
         --dump-header http.headers \
         --write-out '%{http_code}\n' \
         --form 'data=@README.WHYNOTSIPS' \
         --form 'manifest=@README.WHYNOTSIPS.manifest' \
         "$addr_localhost:$PORTA/rhizome/import"
   tfw_cat http.headers http.output
   executeOk_servald rhizome list ''
   assert_rhizome_list --fromhere=0 README.WHYNOTSIPS
   assert_rhizome_received README.WHYNOTSIPS
}

doc_HttpAddLocal="Add file locally using HTTP, returns manifest"
setup_HttpAddLocal() {
   setup_curl_7
   setup_common
   set_instance +A
   executeOk_servald config set rhizome.api.addfile.uri_path "/rhizome/secretaddfile"
   executeOk_servald config set rhizome.api.addfile.default_author $SIDA
   start_servald_instances +A
   wait_until rhizome_http_server_started +A
   get_rhizome_server_port PORTA +A
}
test_HttpAddLocal() {
   echo 'File file1' >file1
   executeOk curl --silent --form 'data=@file1' "http://${addr_localhost}:$PORTA/rhizome/secretaddfile" --output file1.manifest
   assert_manifest_complete file1.manifest
   executeOk_servald rhizome list ''
   assert_rhizome_list --fromhere=1 file1
   extract_manifest_name name file1.manifest
   assert [ "$name" = file1 ]
   assert_rhizome_received file1
}

setup_sync() {
   set_instance +A
   rhizome_add_file file1
   BID1=$BID
   VERSION1=$VERSION
   start_servald_instances dummy1 +A
   wait_until rhizome_http_server_started +A
   get_rhizome_server_port PORTA +A
   set_instance +B
   executeOk_servald config set log.show_time on
   executeOk_servald config set debug.rhizome on
   executeOk_servald config set debug.rhizometx on
   executeOk_servald config set debug.rhizomerx on
   executeOk_servald config set rhizome.direct.peer.0 "http://${addr_localhost}:${PORTA}"
   rhizome_add_file file2
   BID2=$BID
   VERSION2=$VERSION
}

doc_DirectPush="One way push bundle to unconnected node"
setup_DirectPush() {
   setup_common
   setup_sync
}
test_DirectPush() {
   set_instance +B
   executeOk_servald rhizome direct push
   tfw_cat --stdout --stderr
   assert bundle_received_by $BID2:$VERSION2 +A
   set_instance +A
   executeOk_servald rhizome list ''
   assert_rhizome_list --fromhere=1 file1 --fromhere=0 file2
   assert_rhizome_received file2
   set_instance +B
   executeOk_servald rhizome list ''
   assert_rhizome_list --fromhere=1 file2
}

doc_DirectPull="One way pull bundle from unconnected node"
setup_DirectPull() {
   setup_common
   setup_sync
}
test_DirectPull() {
   set_instance +B
   executeOk_servald rhizome direct pull
   tfw_cat --stdout --stderr
   assert bundle_received_by $BID1:$VERSION1 --stderr
   set_instance +A
   executeOk_servald rhizome list ''
   assert_rhizome_list --fromhere=1 file1
   set_instance +B
   executeOk_servald rhizome list ''
   assert_rhizome_list --fromhere=0 file1 --fromhere=1 file2
   assert_rhizome_received file1
}

doc_DirectSync="Two-way sync bundles between unconnected nodes"
setup_DirectSync() {
   setup_common
   setup_sync
}
test_DirectSync() {
   set_instance +B
   executeOk_servald rhizome direct sync
   tfw_cat --stdout --stderr
   assert bundle_received_by $BID1:$VERSION1 --stderr $BID2:$VERSION2 +A
   set_instance +A
   executeOk_servald rhizome list ''
   assert_rhizome_list --fromhere=1 file1 --fromhere=0 file2
   assert_rhizome_received file2
   set_instance +B
   executeOk_servald rhizome list ''
   assert_rhizome_list --fromhere=0 file1 --fromhere=1 file2
   assert_rhizome_received file1
}

runTests "$@"