ExternalVendorCode/serval-dna
1
0
Fork 0
mirror of https://github.com/servalproject/serval-dna.git synced 2024-12-22 14:32:25 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
409186eced
serval-dna/overlay_route.c
Jeremy Lakeman 409186eced Don't bother to calculate scores for invalid nodes
2012-08-09 13:30:26 +09:30

1496 lines
57 KiB
C
Raw Blame History

/*
Serval Distributed Numbering Architecture (DNA)
Copyright (C) 2010 Paul Gardner-Stephen
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#include "serval.h"
#include "strbuf.h"
/*
Here we implement the actual routing algorithm which is heavily based on BATMAN.
The fundamental difference is that we want to allow the mesh to grow beyond the
size that could ordinarily be accomodated by the available bandwidth. Some
explanation follows.
BATMAN operates by having nodes periodically send "hello" or originator messages,
either with a limited distribution or with a sufficiently high TTL to spread
over the whole network.
The latter results in a super-linear bandwidth requirement as the network grows
in size.
What we wish to do is to implement the BATMAN concept, but using link-local traffic
only. To do this we need to change the high-TTL originator frames into something
equivalent, but that does not get automatic network-wide distribution.
What seems possible is to implement the BATMAN approach for link-local neighbours,
and then have each node periodically announce the link-score to the peers that
they know about, whether link-local or more distant. If the number of reported
peers is left unconstrained, super-linear bandwidth consumption will still occur.
However, if the number of peers that each node announces is limited, then bandwidth
will be capped at a constant factor (which can be chosen based on the bandwidth
available). The trade-off being that each node will only be able to see some number
of "nearest" peers based on the available bandwidth.
This seems an entirely reasonable outcome, and at least on the surface would appear
to solve our problem of wanting to allow a global-scale mesh, even if only local
connectivity is possible, in contrast to existing mesh protocols that will not allow
any connectivity once the number of nodes grows beyond a certain point.
Remaining challenges that we have to think through are how to add a hierarchical
element to the mesh that might allow us to route traffic beyond a nodes'
neighbourhood of peers.
There is some hope to extend the effective range beyond the immediate neighbourhood
to some degree by rotating the peers that a node reports on, so that a larger total
set of nodes becomes known to the mesh, in return for less frequent updates on their
link scores and optimal routes.
This actually makes some logical sense, as the general direction in which to route
a frame to a distant node is less likely to change more slowly than for nearer nodes.
So we will attempt this.
With some careful thought, this statistical announcement of peers also serves to allow
long-range but very low bandwidth links, e.g., satellite or dial-up, as well as long-shot
WiFi where bandwidth is less constrained.
Questions arise as to the possibility of introducing routing loops through the use of
stale information. So we will certainly need to have some idea of the freshness of
routing data.
Finally, all this works only for bidirectional links. We will need to think about how
to handle mono-directional links. BATMAN does this well, but I don't have the documentation
here at 36,000 feet to digest it and think about how to incorporate it.
Having landed and thought about this a bit more, what we will do is send link-local
announcements which each direct neighbour Y will listen to and build up an estimated
probability of a packet sent by X reaching them. This information will be
periodically broadcast as the interface ticks, and not forwarded beyond link-local,
this preventing super-scalar traffic growth. When X hears that Y's P(X,Y) from
such a neighbour reception notice X can record P(X,Y) as its link score to Y. This
deals with asymmetric delivery probabilities for link-local neighbours.
So how do we efficiently distribute P(X,Y) to our second-degree neighbours, which
we shall call Z? We will assume that P(X,Z) = P(X,Y)*P(Y,Z). Thus X needs to get
Y's set of P(Y,a) values. This is easy to arrange if X and Y are bidirectionally
link-local, as Y can periodically broadcast this information, and X can cache it.
This process will eventually build up the entire set P(X,b), where b are all nodes
on the mesh. However, it assumes that every link is bidirectional. What if X can
send directly to Y, but Y cannot send directly to X, i.e., P(X,Y)~1, P(Y,X)~0?
Provided that there is some path P(Y,m)*P(m,X) >0, then Y will eventually learn
about it. If Y knows that P(X,Y)>0, then it knows that X is a link-local neighbour
monodirectionally, and thus should endeavour to tell X about its direct neighbours.
This is fairly easy to arrange, and we will try this approach.
So overall, this results in traffic at each node which is O(n^2+n*m) where n is the
number of direct neighbours and m is the total number of nodes reachable on the
mesh. As we can limit the number of nodes reachable on the mesh by having nodes
only advertise their k highest scoring nodes, we can effectively limit the traffic
to approximately linear with respect to reachable node count, but quadratic with
respect to the number of immediate neighbours. This seems a reasonable outcome.
Related to this we need to continue thinking about how to handle intermittant links in a more
formal sense, including getting an idea of when nodes might reappear.
Turning to the practical side of things, we need to keep track of reachability scores for
nodes via each of our immediate neighbours. Recognising the statistical nature of
the announcments, we probably want to keep track of some that have ceased to be neighbours
in case they become neighbours again.
Probably it makes more sense to have a list of known nodes and the most recent and
highest scoring nodes by which we may reach them, complete with the sequence numbers of last
observation that they are based upon, and possibly more information down the track to
support intermittant links.
*/
/* For fast handling we will have a number of bins that will be indexed by the
first few bits of the peer's SIDs, and a number of entries in each bin to
handle hash collissions while still allowing us to have static memory usage. */
int overlay_bin_count=0;
int overlay_bin_size=0; /* associativity, i.e., entries per bin */
int overlay_bin_bytes=0; /* number of bytes required to represent the range
[0..bin_count) */
overlay_node **overlay_nodes=NULL;
/* We also need to keep track of which nodes are our direct neighbours.
This means we need to keep an eye on how recently we received DIRECT announcements
from nodes, and keep a list of the most recent ones. The challenge is to keep the
list ordered without having to do copies or have nasty linked-list structures that
require lots of random memory reads to resolve.
The simplest approach is to maintain a large cache of neighbours and practise random
replacement. It is however succecptible to cache flushing attacks by adversaries, so
we will need something smarter in the long term.
*/
int overlay_max_neighbours=0;
int overlay_neighbour_count=0;
overlay_neighbour *overlay_neighbours=NULL;
/* allocate structures according to memory availability.
We size differently because some devices are very constrained,
e.g., mesh potatoes, some are middle sized, like mobile phones, and
some are very large, like dedicated servers, that can keep track of
very many nodes.
The memory allocation is in two main areas:
1. Neighbour list, which is short, requiring just a single pointer per
direct neighbour. So this can probably be set to a fairly large value
on any sized machine, certainly in the thousands, which should be more
than sufficient for wifi-type interfaces. 1000 neighbours requires
onlt 8KB on a 64 bit machine, which is probably a reasonable limit per
MB allocated. This leaves 1016KB/MB for:
2. The node information (overlay_node) structures. These take more
space and have to be sized appropriately. We also need to choose the
associativity of the node table based on the size of the structure.
The smaller the structure the greater the associativity we should have
so that the fewer the entries the more effectively we use them. The
trade-off is that increased associativity results in increased search
time as the bins are searched for matches. This is also why for very
large tables we want low associativity so that we are more CPU efficient.
The bulk of the size ofthe overlay_node structure is the observations
information, because each observation contains a full 32 byte SID. The
question is whether a full SID is required, or whether a prefix is
sufficient, or if there is some even more compact representation possible.
In principle the sender of the observation should be a direct neighbour,
and so we could just use a neighbour index. However the neighbour indices
are liable to change or become invalid over time, and we don't want to have
to trawl through the nodes every time that happens, as otherwise the CPU
requirements will be crazy.
This suggests that the use of a prefix is probably more appropriate. The
prefix must be long enough to be robust against birthday-paradox effects
and attacks. So at least 8 bytes (64 bits) is mandatory to make it
reasonably difficult to find a colliding public key prefix. Prudence
suggests that a longer prefix is desirable to give a safety margin, perhaps
12 bytes (96 bits) being a reasonable figure.
This approximately halves the memory requirement per node to about 4KB (i.e.
~250 nodes per MB), and employing shorter prefixes than 12 bytes will result
in diminishing returns, so this gives us confidence that it is an appropriate
figure.
Four-way associativity is probably reasonable for large-memory deployments
where we have space for many thousands of nodes to keep string comparison
effort to low levels.
For small-memory deployments where we have space for only a few hundred nodes it
probably makes sence to go for eight-way associativity just to be on the safe
side. However, this is somewhat arbitrary. Only experience will teach us.
One final note on potential attacks against us is that by having a hashed structure,
even with modest associativity, is that if an attacker knows the hash function
they can readily cause hash collisions and interfere with connectivity to nodes
on the mesh.
The most robust solution to this problem would be to use a linear hash function
that takes, say, 10 of the 32 bytes as input, as this would result in a hash function
space of: 32!/22! which is > 2^47. This would then require several times 2^47
observation injections by an adversary to cause a hash collision with confidence.
Actually determining that such a collision had been caused would probably multiply
the effort required by some small further constant.
Using a non-linear hash function would raise the space to 32^10 > 2^50, the factor
of 8 probably not being worth the CPU complexity of such a non-linear function.
However the question arises as to whether such an extreme approach is required,
remembering that changing the hash function does not break the protocol, so
such strong hash functions could be employed in future if needed without breaking
backward compatibility.
So let us then think about some very simple alternatives that might be good enough
for now, but that are very fast to calculate.
The simplest is to just choose a sufficient number of bytes from the SIDs to create
a sufficiently long index value. This gives 32!/(32-n)! where n is the number of
bytes required, or 32 for the worst-case situation of n.
An improvement is to xor bytes to produce the index value. Using pairs of bytes
gets us to something along the lines of 32!/(32-2n)! for production of a single byte,
which is a modest improvement, but possibly not good enough. As we increase the number
of bytes xored together the situation improves to a point. However if we go to far we
end up reducing the total space because once more than half of the bytes are involved in
the xor it is equivalent to the xor of all of the bytes xored with the bytes not included
in the xor. This means that regardless of the length of the index we need, we probably want
to use only half of the bytes as input, a this gives a complexity of 32!/16! = 2^73,
which is plenty.
In fact, this gives us a better result than the previous concept, and can be implemented
using a very simple algorithm. All we need to do is get a random ordering of the numbers
[0..31], and round robin xor the bytes we need with the [0..15]th elements of the random
ordering.
*/
/* The random ordering of bytes for the hash */
int overlay_route_hash_order[16];
int overlay_route_hash_bytes=0;
int overlay_route_initP=0;
int overlay_route_init(int mb_ram)
{
int i,j;
/* Try to catch one observed behaviour when memory corruption has occurred. */
if (overlay_route_initP) {
WHY("multiply called");
sleep(3600);
}
overlay_route_initP=1;
memabuseCheck();
srandomdev();
/* Generate hash ordering function */
strbuf b = strbuf_alloca(12 * 32);
for(i=0;i<32;i++) {
j=0;
overlay_route_hash_order[i]=random()&31;
while(j<i) {
overlay_route_hash_order[i]=random()&31;
for(j=0;j<i;j++) if (overlay_route_hash_order[i]==overlay_route_hash_order[j]) break;
}
strbuf_sprintf(b, " %d", overlay_route_hash_order[i]);
}
if (debug&DEBUG_OVERLAYROUTING)
DEBUGF("Generating byte-order for hash function:%s", strbuf_str(b));
overlay_route_hash_bytes=16;
int associativity=4;
int bin_count=1;
/* Now fiddle it to get bin_count to be a power of two that fits and doesn't waste too much space. */
long long space=(sizeof(overlay_neighbour*)*1024LL*mb_ram)+sizeof(overlay_node)*bin_count*associativity*1LL;
while (space<mb_ram*1048576LL&&associativity<8)
{
long long space2=(sizeof(overlay_neighbour*)*1024LL*mb_ram)+sizeof(overlay_node)*(bin_count*2LL)*associativity*1LL;
if (space2<mb_ram*1048576LL) { bin_count*=2; continue; }
space2=(sizeof(overlay_neighbour*)*1024LL)+sizeof(overlay_node)*bin_count*(associativity+1)*1LL;
if (space2<mb_ram*1048576LL) { associativity++; continue; }
break;
}
/* Report on the space used */
{
space=(sizeof(overlay_neighbour*)*1024LL*mb_ram)+sizeof(overlay_node)*bin_count*associativity*1LL;
int percent=100LL*space/(mb_ram*1048576LL);
if (debug&DEBUG_OVERLAYROUTING)
DEBUGF("Using %d%% of %dMB RAM allows for %d bins with %d-way associativity and %d direct neighbours",
percent,mb_ram,bin_count,associativity,1024*mb_ram);
}
/* Now allocate the structures */
overlay_nodes=calloc(sizeof(overlay_node*),bin_count);
if (!overlay_nodes) return WHY_perror("calloc");
overlay_neighbours=calloc(sizeof(overlay_neighbour),1024*mb_ram);
if (!overlay_neighbours) {
WHY_perror("calloc");
free(overlay_nodes);
return -1;
}
for(i=0;i<bin_count;i++)
{
overlay_nodes[i]=calloc(sizeof(overlay_node),associativity);
if (!overlay_nodes[i]) {
WHY_perror("calloc");
while(--i>=0) free(overlay_nodes[i]);
free(overlay_nodes);
free(overlay_neighbours);
return -1;
}
}
overlay_max_neighbours=1024*mb_ram;
overlay_bin_count=bin_count;
overlay_bin_size=associativity;
if (debug&DEBUG_OVERLAYROUTING)
DEBUGF("Node (%d bins) and neighbour tables allocated",bin_count);
/* Work out number of bytes required to represent the bin number.
Used for calculation of sid hash */
overlay_bin_bytes=1;
while(bin_count&0xffffff00) {
if (debug&DEBUG_OVERLAYROUTING)
DEBUGF("bin_count=0x%08x, overlay_bin_bytes=%d",bin_count,overlay_bin_bytes);
overlay_bin_bytes++;
bin_count=bin_count>>8;
}
if (debug&DEBUG_OVERLAYROUTING)
DEBUGF("bin_count=0x%08x, overlay_bin_bytes=%d",bin_count,overlay_bin_bytes);
return 0;
}
/* Select a next hop to get to a node.
Frist, let us consider neighbours. These are on a local link to us, and do not require any
intermediate nodes to transmit to us. However, assymetric packet loss is common, so we may
not be able to transmit back to the neighbour. We know if we can because we will have
received acks to our self announcements. However, to send an ack to a self announcement we
need a fall-back option. This fall-back should be by sending to the broadcast address.
The complication comes when we have multiple interfaces available. If we send to all, then
we need a way of keeping track which interfaces we have sent it on so far, which is a bit
icky, and more to the point requires some revamping of code. A bigger problem is that we might
have cheap and expensive interfaces, and we don't want to go blabbing about our wifi or ethernet
based peers over a $10/MB BGAN link, when we can reasonably know that it shouldn't be necessary.
The trouble is that sometimes it might just be necessary. We then have two options, send traffic
over multiple interfaces to try to discover such one-way links, even if internet back-haul is
required in between. This is nice in the long-term. Or, we be more conservative with the traffic
and require that a resolution to the route be discoverable via the interface that the frame
arrived on.
In any case, we need to tag the nexthop address with the interface(s) on which to send it.
Once we have this working and neighbours can communicate, then we can move on to addressing
nodes that are only indirectly connected. Indeed, the two are somewhat interconnected as
an indirect route may be required to get a self-announce ack back to the sender.
*/
int overlay_get_nexthop(unsigned char *d,unsigned char *nexthop,int *interface)
{
int i;
if (*d==0){
if (debug&DEBUG_OVERLAYROUTING)
DEBUGF("No open path to %s, invalid sid",alloca_tohex_sid(d));
return -1;
}
if (overlay_broadcast_drop_check(d)) return WHY("I have sent that broadcast frame before");
if (overlay_address_is_broadcast(d)) {
bcopy(&d[0],&nexthop[0],SID_SIZE);
return 0;
}
if (!overlay_neighbours) return WHY("I have no neighbours");
overlay_node *n=overlay_route_find_node(d,SID_SIZE,0 /* don't create if missing */ );
if (!n){
if (debug&DEBUG_OVERLAYROUTING)
DEBUGF("No open path to %s, unknown peer",alloca_tohex_sid(d));
return -1;
}
time_ms_t now = gettime_ms();
overlay_neighbour *direct_neighbour=NULL;
if (n->neighbour_id) {
direct_neighbour = &overlay_neighbours[n->neighbour_id];
overlay_route_recalc_neighbour_metrics(direct_neighbour, now);
/* Is a direct neighbour.
So in the absence of any better indirect route, we pick the interface that
we can hear this neighbour on the most reliably, and then send the frame
via that interface and directly addressed to the recipient. */
int ifn = -1;
for (i = 0; i < overlay_interface_count; ++i) {
if ( overlay_interfaces[i].state == INTERFACE_STATE_UP
&& (ifn == -1 || direct_neighbour->scores[i] > direct_neighbour->scores[ifn]))
ifn = i;
}
if (ifn != -1 && direct_neighbour->scores[ifn] > 0) {
*interface = ifn;
bcopy(d, nexthop, SID_SIZE);
if (debug&DEBUG_OVERLAYROUTING)
DEBUGF("nexthop is %s", alloca_tohex_sid(nexthop));
return 0;
}
}
/* Is not a direct neighbour.
XXX - Very simplistic for now. */
int o;
int best_score=0;
int best_o=-1;
for(o=0;o<OVERLAY_MAX_OBSERVATIONS;o++) {
int score=n->observations[o].observed_score;
if (!score)
continue;
overlay_neighbour *neighbour
=overlay_route_get_neighbour_structure
(n->observations[o].sender_prefix,OVERLAY_SENDER_PREFIX_LENGTH,0);
if (neighbour && neighbour!=direct_neighbour) {
overlay_route_recalc_neighbour_metrics(neighbour, now);
for(i=1;i<OVERLAY_MAX_INTERFACES;i++) {
if (overlay_interfaces[i].state==INTERFACE_STATE_UP &&
neighbour->scores[i]*score>best_score) {
bcopy(&neighbour->node->sid[0],&nexthop[0],SID_SIZE);
*interface=i;
best_o=o;
best_score=score;
}
}
}
}
if (best_o>-1) {
return 0;
} else {
if (debug&DEBUG_OVERLAYROUTING)
DEBUGF("No open path to %s, no good neighbour observations",alloca_tohex_sid(d));
return -1;
}
}
unsigned int overlay_route_hash_sid(const unsigned char *sid)
{
/* Calculate the bin number of an address (sid) from the sid. */
if (!overlay_route_hash_bytes) return WHY("overlay_route_hash_bytes==0");
unsigned int bin=0;
int byte=0;
int i;
for(i=0;i<overlay_route_hash_bytes;i++) {
bin=bin^((sid[overlay_route_hash_order[i]])<<(8*byte));
byte++;
if (byte>=overlay_bin_bytes) byte=0;
}
/* Mask out extranous bits to return only a valid bin number */
bin&=(overlay_bin_count-1);
if (debug&DEBUG_OVERLAYROUTING)
DEBUGF("Address %s resolves to bin #%d", alloca_tohex_sid(sid), bin);
return bin;
}
overlay_node *overlay_route_find_node(const unsigned char *sid, int prefixLen, int createP)
{
if (*sid==0 || prefixLen<overlay_route_hash_bytes){
INFOF("Sid %s/%d cannot ever become a node!", alloca_tohex_sid(sid), prefixLen);
return NULL;
}
int bin_number = overlay_route_hash_sid(sid);
if (bin_number < 0) {
WHY("negative bin number");
return NULL;
}
int free_slot = -1;
overlay_node *found=NULL;
{
int slot;
for (slot = 0; slot < overlay_bin_size; slot++)
if (overlay_nodes[bin_number][slot].sid[0]==0)
free_slot = slot;
else if (memcmp(sid, overlay_nodes[bin_number][slot].sid, prefixLen) == 0){
if (found){
INFOF("SID prefix %d %s is not unique", prefixLen, alloca_tohex_sid(sid));
return NULL;
}
found = &overlay_nodes[bin_number][slot];
}
}
if (found)
return found;
/* Didn't find it */
if (!createP) return NULL;
if (free_slot == -1) {
/* Evict */
WARN("overlay_nodes[] eviction NOT IMPLEMENTED");
return NULL;
int i;
for(i=0;i<OVERLAY_MAX_OBSERVATIONS;i++)
overlay_nodes[bin_number][free_slot].observations[i].observed_score=0;
overlay_nodes[bin_number][free_slot].neighbour_id=0;
overlay_nodes[bin_number][free_slot].most_recent_observation_id=0;
overlay_nodes[bin_number][free_slot].best_link_score=0;
overlay_nodes[bin_number][free_slot].best_observation=0;
for(i=0;i<OVERLAY_MAX_INTERFACES;i++) {
overlay_nodes[bin_number][free_slot].most_recent_advertisment_ms[i]=0;
overlay_nodes[bin_number][free_slot].most_recent_advertised_score[i]=0;
}
}
bcopy(sid, overlay_nodes[bin_number][free_slot].sid, SID_SIZE);
// This info message is used by tests; don't alter or remove it.
INFOF("ADD OVERLAY NODE sid=%s slot=%d", alloca_tohex_sid(sid), free_slot);
return &overlay_nodes[bin_number][free_slot];
}
int overlay_route_ack_selfannounce(overlay_frame *f,
unsigned int s1,unsigned int s2,
int interface,
overlay_neighbour *n)
{
/* Acknowledge the receipt of a self-announcement of an immediate neighbour.
We could acknowledge immediately, but that requires the transmission of an
extra packet with all the overhead that entails. However, there is no real
need to send the ack out immediately. It should be entirely reasonable to
send the ack out with the next interface tick.
So we can craft the ack and submit it to the queue. As the next-hop will get
determined at TX time, this will ensure that we send the packet out on the
right interface to reach the originator of the self-assessment.
So all we need to do is craft the payload and put it onto the queue for
OVERLAY_MESH_MANAGEMENT messages.
Also, we should check for older such frames on the queue and drop them.
There is one caveat to the above: until the first selfannounce gets returned,
we don't have an open route. Thus we need to just make sure that the ack
goes out broadcast if we don't know about a return path. Once the return path
starts getting built, it should be fine.
*/
/* XXX Allocate overlay_frame structure and populate it */
overlay_frame *out=NULL;
out=calloc(sizeof(overlay_frame),1);
if (!out) return WHY("calloc() failed to allocate an overlay frame");
out->type=OF_TYPE_SELFANNOUNCE_ACK;
out->modifiers=0;
out->ttl=6; /* maximum time to live for an ack taking an indirect route back
to the originator. If it were 1, then we would not be able to
handle mono-directional links (which WiFi is notorious for).
XXX 6 is quite an arbitrary selection however. */
/* Set destination of ack to source of observed frame */
if (overlay_frame_set_neighbour_as_destination(out,n)) {
op_free(out);
return WHY("overlay_frame_set_neighbour_as_source() failed");
}
/* set source to ourselves */
overlay_frame_set_me_as_source(out);
/* Next-hop will get set at TX time, so no need to set it here.
However, if there is no known next-hop for this node (because the return path
has not yet begun to be built), then we need to set the nexthop to broadcast. */
out->nexthop_address_status=OA_UNINITIALISED;
if (overlay_resolve_next_hop(out)) {
/* no open path, so convert to broadcast */
int i;
for(i=0;i<(SID_SIZE-8);i++) out->nexthop[i]=0xff;
for(i=(SID_SIZE-8);i<SID_SIZE;i++) out->nexthop[i]=random()&0xff;
out->nexthop_address_status=OA_RESOLVED;
out->ttl=2;
out->isBroadcast=1;
if (debug&DEBUG_OVERLAYROUTING)
DEBUG("Broadcasting ack to selfannounce for hithero unroutable node");
} else
out->isBroadcast = 0;
/* Set the time in the ack. Use the last sequence number we have seen
from this neighbour, as that may be helpful information for that neighbour
down the track. My policy is to communicate that information which should
be helpful for forming and maintaining the health of the mesh, as that way
each node can in potentially implement a different mesh routing protocol,
without breaking the wire protocol. This makes over-the-air software updates
much safer.
Combining of adjacent observation reports may mean that the most recent
observation is not the last one in the list, also the wrapping of the sequence
numbers means we can't just take the highest-numbered sequence number.
So we need to take the observation which was most recently received.
*/
out->payload=ob_new(4+32*2+1); /* will grow if it isn't big enough, but let's try to
avoid a realloc() if possible */
/* XXX - we should merge contiguous observation reports so that packet loss
on the return path doesn't count against the link. */
ob_append_int(out->payload,s1);
ob_append_int(out->payload,s2);
/* The ack needs to contain the per-interface scores that we have built up
for this neighbour.
We expect that for most neighbours they will have many fewer than 32 interfaces,
and even when they have multiple interfaces that we will only be able to hear
them on one or a few.
So we will structure the format so that we use fewer bytes when fewer interfaces
are involved.
Probably the simplest is to put each non-zero score followed by it's interface.
That way the whole list will be easy to parse, and as short as 3 bytes for a
single interface.
We could use the spare 2 bits at the top of the interface id to indicate
multiple interfaces with same score?
*/
#ifdef NOTDEFINED
int i;
for(i=0;i<OVERLAY_MAX_INTERFACES;i++)
{
/* Only include interfaces with score >0 */
if (n->scores[i]) {
ob_append_byte(out->payload,n->scores[i]);
ob_append_byte(out->payload,i);
}
}
/* Terminate list */
ob_append_byte(out->payload,0);
#endif
ob_append_byte(out->payload,interface);
/* Add to queue. Keep broadcast status that we have assigned here if required to
get ack back to sender before we have a route. */
if (overlay_payload_enqueue(OQ_MESH_MANAGEMENT,out,out->isBroadcast))
{
op_free(out);
return WHY("overlay_payload_enqueue(self-announce ack) failed");
}
/* XXX Remove any stale versions (or should we just freshen, and forget making
a new one, since it would be more efficient). */
return 0;
}
int overlay_route_make_neighbour(overlay_node *n)
{
if (!n) return WHY("n is NULL");
/* If it is already a neighbour, then return */
if (n->neighbour_id) return 0;
/* If address is local don't both making it a neighbour */
if (overlay_address_is_local(n->sid)) return 0;
/* It isn't yet a neighbour, so find or free a neighbour slot */
/* slot 0 is reserved, so skip it */
if (!overlay_neighbour_count) overlay_neighbour_count=1;
if (overlay_neighbour_count<overlay_max_neighbours) {
/* Use next free neighbour slot */
n->neighbour_id=overlay_neighbour_count++;
} else {
/* Evict an old neighbour */
int nid=1+random()%(overlay_max_neighbours-1);
if (overlay_neighbours[nid].node) overlay_neighbours[nid].node->neighbour_id=0;
n->neighbour_id=nid;
}
bzero(&overlay_neighbours[n->neighbour_id],sizeof(overlay_neighbour));
overlay_neighbours[n->neighbour_id].node=n;
return 0;
}
overlay_neighbour *overlay_route_get_neighbour_structure(unsigned char *packed_sid,
int prefixLen,int createP)
{
IN();
if (overlay_address_is_local(packed_sid)) {
WHY("asked for neighbour structure for myself");
RETURN(NULL);
}
overlay_node *n=overlay_route_find_node(packed_sid,prefixLen,createP);
if (!n) {
// WHY("Could not find node record for observed node");
RETURN(NULL);
}
/* Check if node is already a neighbour, or if not, make it one */
if (!n->neighbour_id){
if (!createP)
RETURN(NULL);
if (overlay_route_make_neighbour(n)) {
WHY("overlay_route_make_neighbour() failed");
RETURN(NULL);
}
}
/* Get neighbour structure */
RETURN(&overlay_neighbours[n->neighbour_id]);
}
int overlay_route_i_can_hear_node(unsigned char *who,int sender_interface,
unsigned int s1,unsigned int s2,
time_ms_t now)
{
if (0) DEBUGF("I can hear node %s (but I really only care who can hear me)",
alloca_tohex_sid(who));
return 0;
}
int overlay_route_node_can_hear_me(unsigned char *who,int sender_interface,
unsigned int s1,unsigned int s2,
time_ms_t now)
{
/* 1. Find (or create) node entry for the node.
2. Replace oldest observation with this observation.
3. Update score of how reliably we can hear this node */
/* Get neighbour structure */
overlay_neighbour *neh=overlay_route_get_neighbour_structure(who,SID_SIZE,1 /* create if necessary */);
if (!neh)
return -1;
int obs_index=neh->most_recent_observation_id;
int merge=0;
/* See if this observation is contiguous with a previous one, if so, merge.
This not only reduces the number of observation slots we need, but dramatically speeds up
the scanning of recent observations when re-calculating observation scores. */
while (neh->observations[obs_index].valid && neh->observations[obs_index].s2 >= s1 - 1) {
if (neh->observations[obs_index].sender_interface == sender_interface) {
if (debug&DEBUG_OVERLAYROUTING)
DEBUGF("merging observation into slot #%d s1=%u s2=%u", obs_index, neh->observations[obs_index].s1, neh->observations[obs_index].s2);
s1 = neh->observations[obs_index].s1;
merge=1;
break;
}
if (--obs_index < 0)
obs_index = OVERLAY_MAX_OBSERVATIONS - 1;
}
if (!merge) {
/* Replace oldest observation with this one */
obs_index = neh->most_recent_observation_id + 1;
if (obs_index >= OVERLAY_MAX_OBSERVATIONS)
obs_index = 0;
}
if (debug&DEBUG_OVERLAYROUTING)
DEBUGF("assign observation slot #%d: s1=%u s2=%u time_ms=%lld", obs_index, s1, s2, (long long)now);
neh->observations[obs_index].s1=s1;
neh->observations[obs_index].s2=s2;
neh->observations[obs_index].sender_interface=sender_interface;
neh->observations[obs_index].time_ms=now;
neh->observations[obs_index].valid=1;
neh->most_recent_observation_id=obs_index;
neh->last_observation_time_ms=now;
/* force updating of stats for neighbour if we have added an observation */
neh->last_metric_update=0;
/* Update reachability metrics for node */
if (overlay_route_recalc_neighbour_metrics(neh,now))
return -1;
if (debug&DEBUG_OVERLAYROUTEMONITOR) overlay_route_dump();
return 0;
}
int overlay_route_saw_selfannounce(overlay_frame *f, time_ms_t now)
{
IN();
unsigned int s1,s2;
unsigned char sender_interface;
overlay_neighbour *n=overlay_route_get_neighbour_structure(f->source,SID_SIZE,
1 /* make neighbour if not yet one */);
if (!n){
RETURN(-1);
}
/* Record current sender for reference by addresses in subsequent frames in the
ensemble */
overlay_abbreviate_set_current_sender(f->source);
s1=ob_get_int(f->payload, 0);
s2=ob_get_int(f->payload, 4);
sender_interface=ob_getbyte(f->payload, 8);
if (debug&DEBUG_OVERLAYROUTING)
DEBUGF("Received self-announcement for sequence range [%08x,%08x] from interface %d",s1,s2,sender_interface);
overlay_route_i_can_hear_node(f->source,sender_interface,s1,s2,now);
overlay_route_ack_selfannounce(f,s1,s2,sender_interface,n);
RETURN(0);
}
/* XXX Think about scheduling this node's score for readvertising? */
int overlay_route_recalc_node_metrics(overlay_node *n, time_ms_t now)
{
int o;
int best_score=0;
int best_observation=-1;
if (n->sid[0]==0)
return 0;
for(o=0;o<OVERLAY_MAX_OBSERVATIONS;o++)
{
if (n->observations[o].observed_score)
{
int discounted_score=n->observations[o].observed_score;
discounted_score-=(now-n->observations[o].rx_time)/1000;
if (discounted_score<0) discounted_score=0;
n->observations[o].corrected_score=discounted_score;
if (discounted_score>best_score) {
best_score=discounted_score;
best_observation=o;
}
}
}
if (n->neighbour_id)
{
/* Node is also a direct neighbour, so check score that way */
if (n->neighbour_id>overlay_max_neighbours||n->neighbour_id<0)
return WHY("n->neighbour_id is invalid.");
int i;
for(i=0;i<overlay_interface_count;i++)
{
if (overlay_interfaces[i].state==INTERFACE_STATE_UP &&
overlay_neighbours[n->neighbour_id].scores[i]>best_score)
{
best_score=overlay_neighbours[n->neighbour_id].scores[i];
best_observation=-1;
}
}
}
/* Think about scheduling this node's score for readvertising if its score
has changed a lot?
Really what we probably want is to advertise when the score goes up, since
if it goes down, we probably don't need to say anything at all.
*/
int diff=best_score-n->best_link_score;
if (diff>0) {
overlay_route_please_advertise(n);
if (debug&DEBUG_OVERLAYROUTEMONITOR) overlay_route_dump();
}
if (n->best_link_score && !best_score){
INFOF("PEER UNREACHABLE, sid=%s", alloca_tohex_sid(n->sid));
monitor_announce_unreachable_peer(n->sid);
}else if(best_score && !n->best_link_score){
INFOF("PEER REACHABLE, sid=%s", alloca_tohex_sid(n->sid));
/* Make sure node is advertised soon */
overlay_route_please_advertise(n);
monitor_announce_peer(n->sid);
}
/* Remember new reachability information */
n->best_link_score=best_score;
n->best_observation=best_observation;
return 0;
}
/* Recalculate node reachability metric, but only for directly connected nodes,
i.e., link-local neighbours.
The scores should be calculated separately for each interface we can
hear the node on, so that this information can get back to the sender so that
they know the best interface to use when trying to talk to us.
For now we will calculate a weighted sum of recent reachability over some fixed
length time interval.
The sequence numbers are all based on a milli-second clock.
For mobile mesh networks we need this metric to be very fast adapting to new
paths, but to have a memory of older paths in case they are still useful.
We thus combined equally a measure of very recent reachability (in last 10
interface ticks perhaps?) with a measure of longer-term reachability (last
200 seconds perhaps?). Also, if no recent observations, then we further
limit the score.
*/
int overlay_route_recalc_neighbour_metrics(overlay_neighbour *n, time_ms_t now)
{
int i;
time_ms_t most_recent_observation=0;
if (!n->node)
return 0;
if (debug&DEBUG_OVERLAYROUTING)
DEBUGF("Updating neighbour metrics for %s", alloca_tohex_sid(n->node->sid));
/* At most one update per half second */
if (n->last_metric_update == 0) {
if (debug&DEBUG_OVERLAYROUTING)
DEBUG("last update was never");
} else {
time_ms_t ago = now - n->last_metric_update;
if (ago < 500) {
if (debug&DEBUG_OVERLAYROUTING)
DEBUGF("last update was %lldms ago -- skipping", (long long)ago);
return 0;
}
if (debug&DEBUG_OVERLAYROUTING)
DEBUGF("last update was %lldms ago", (long long)ago);
}
n->last_metric_update = now;
/* Somewhere to remember how many milliseconds we have seen */
int ms_observed_5sec[OVERLAY_MAX_INTERFACES];
int ms_observed_200sec[OVERLAY_MAX_INTERFACES];
for(i=0;i<OVERLAY_MAX_INTERFACES;i++) {
ms_observed_5sec[i]=0;
ms_observed_200sec[i]=0;
}
/* XXX This simple accumulation scheme does not weed out duplicates, nor weight for recency of
communication.
Also, we might like to take into account the interface we received
the announcements on. */
for(i=0;i<OVERLAY_MAX_OBSERVATIONS;i++) {
if (!n->observations[i].valid ||
n->observations[i].sender_interface>=OVERLAY_MAX_INTERFACES ||
overlay_interfaces[n->observations[i].sender_interface].state!=INTERFACE_STATE_UP)
continue;
/* Work out the interval covered by the observation.
The times are represented as lowest 32 bits of a 64-bit
millisecond clock. This introduces modulo problems,
however by using 32-bit modulo arithmatic here, we avoid
most of them. */
unsigned int interval=n->observations[i].s2-n->observations[i].s1;
/* Check the observation age, and ignore if too old */
time_ms_t obs_age = now - n->observations[i].time_ms;
if (debug&DEBUG_OVERLAYROUTING)
DEBUGF("tallying obs: %lldms old, %ums long", obs_age,interval);
/* Ignore very large intervals (>1hour) as being likely to be erroneous.
(or perhaps a clock wrap due to the modulo arithmatic)
One tick per hour should be well and truly slow enough to do
50KB per 12 hours, which is the minimum traffic charge rate
on an expensive BGAN satellite link.
*/
if (interval>=3600000 || obs_age>200000)
continue;
if (debug&DEBUG_OVERLAYROUTING)
DEBUGF("adding %dms (interface %d '%s')",
interval,n->observations[i].sender_interface,
overlay_interfaces[n->observations[i].sender_interface].name);
ms_observed_200sec[n->observations[i].sender_interface]+=interval;
if (obs_age<=5000){
ms_observed_5sec[n->observations[i].sender_interface]+=(interval>5000?5000:interval);
}
if (n->observations[i].time_ms>most_recent_observation) most_recent_observation=n->observations[i].time_ms;
}
/* From the sum of observations calculate the metrics.
We want the score to climb quickly and then plateu.
*/
int scoreChanged=0;
for(i=0;i<OVERLAY_MAX_INTERFACES;i++) {
int score;
if (ms_observed_200sec[i]>200000) ms_observed_200sec[i]=200000;
if (ms_observed_5sec[i]>5000) ms_observed_5sec[i]=5000;
if (ms_observed_200sec[i]==0) {
// Not observed at all
score=0;
} else {
int contrib_200=ms_observed_200sec[i]/(200000/128);
int contrib_5=ms_observed_5sec[i]/(5000/128);
if (contrib_5<1)
score=contrib_200/2;
else
score=contrib_5+contrib_200;
/* Deal with invalid sequence number ranges */
if (score<1) score=1;
if (score>255) score=255;
}
if (n->scores[i]!=score){
scoreChanged=1;
n->scores[i]=score;
}
if ((debug&DEBUG_OVERLAYROUTING)&&score)
DEBUGF("Neighbour score on interface #%d = %d (observations for %dms)",i,score,ms_observed_200sec[i]);
}
if (scoreChanged)
overlay_route_recalc_node_metrics(n->node, now);
return 0;
}
/*
Self-announcement acks bounce back to the self-announcer from immediate neighbours
who report the link score they have calculated based on listening to self-announces
from that peer. By acking them these scores then get to the originator, who then
has a score for the link to their neighbour, which is measuring the correct
direction of the link.
Frames consist of 32bit timestamp in seconds followed by zero or more entries
of the format:
8bits - link score
8bits - interface number
this is followed by a 00 byte to indicate the end.
That way we don't waste lots of bytes on single-interface nodes.
(But I am sure we can do better).
These link scores should get stored in our node list as compared to our neighbour list,
with the node itself listed as the nexthop that the score is associated with.
*/
int overlay_route_saw_selfannounce_ack(overlay_frame *f,long long now)
{
if (debug&DEBUG_OVERLAYROUTING)
DEBUGF("processing selfannounce ack (payload length=%d)",f->payload->length);
if (!overlay_neighbours) {
if (debug&DEBUG_OVERLAYROUTING)
DEBUG("no neighbours, so returning immediately");
return 0;
}
if (f->payload->length<9)
return WHY("FOO! selfannounce ack packet too short");
unsigned int s1=ob_get_int(f->payload,0);
unsigned int s2=ob_get_int(f->payload,4);
int iface=ob_getbyte(f->payload,8);
// Call something like the following for each link
overlay_route_node_can_hear_me(f->source,iface,s1,s2,now);
return 0;
}
/* if to and via are the same, then this is evidence that we can get to the
node directly. */
int overlay_route_record_link(time_ms_t now, unsigned char *to,
unsigned char *via,int sender_interface,
unsigned int s1,unsigned int s2,int score,
int gateways_en_route)
{
if (debug & DEBUG_OVERLAYROUTING)
DEBUGF("to=%s, via=%s, sender_interface=%d, s1=%d, s2=%d score=%d gateways_en_route=%d",
alloca_tohex_sid(to), alloca_tohex_sid(via), sender_interface, s1, s2,
score, gateways_en_route
);
if (sender_interface>OVERLAY_MAX_INTERFACES || score == 0) {
if (debug & DEBUG_OVERLAYROUTING)
DEBUG("invalid report");
return 0;
}
overlay_node *n = overlay_route_find_node(to, SID_SIZE, 1 /* create node if missing */);
if (!n)
return WHY("Could not create entry for node");
int slot = -1;
int i;
for (i = 0; i < OVERLAY_MAX_OBSERVATIONS; ++i) {
/* Take note of where we can find space for a fresh observation */
if (slot == -1 && n->observations[i].observed_score == 0)
slot = i;
/* If the intermediate host ("via") address and interface numbers match, then overwrite old
observation with new one */
if (memcmp(via, n->observations[i].sender_prefix, OVERLAY_SENDER_PREFIX_LENGTH) == 0) {
slot = i;
break;
}
}
/* If in doubt, replace a random slot.
XXX - we should probably replace the lowest scoring slot instead, but random will work well
enough for now. */
if (slot == -1) {
slot = random() % OVERLAY_MAX_OBSERVATIONS;
if (debug & DEBUG_OVERLAYROUTING)
DEBUGF("allocate observation slot=%d", slot);
} else {
if (debug & DEBUG_OVERLAYROUTING)
DEBUGF("overwrite observation slot=%d (sender_prefix=%s interface=%u observed_score=%u rx_time=%lld)",
slot,
alloca_tohex(n->observations[slot].sender_prefix, OVERLAY_SENDER_PREFIX_LENGTH),
n->observations[slot].interface,
n->observations[slot].observed_score,
n->observations[slot].rx_time
);
}
n->observations[slot].observed_score=0;
n->observations[slot].gateways_en_route=gateways_en_route;
n->observations[slot].rx_time=now;
bcopy(via,n->observations[slot].sender_prefix,OVERLAY_SENDER_PREFIX_LENGTH);
n->observations[slot].observed_score=score;
n->observations[slot].interface=sender_interface;
/* Remember that we have seen an observation for this node.
XXX - This should actually be set to the time that the last first-hand
observation of the node was made, so that stale information doesn't build
false belief of reachability.
This is why the timestamp field is supplied, which is just copied from the
original selfannouncement ack. We just have to register it against our
local time to interpret it (XXX which comes with some risks related to
clock-skew, but we will deal with those in due course).
*/
n->last_observation_time_ms=now;
if (s2>n->last_first_hand_observation_time_millisec)
n->last_first_hand_observation_time_millisec=s2;
overlay_route_recalc_node_metrics(n,now);
if (debug & DEBUG_OVERLAYROUTEMONITOR)
overlay_route_dump();
return 0;
}
int overlay_address_is_local(unsigned char *s)
{
int cn=0,in=0,kp=0;
int found=keyring_find_sid(keyring,&cn,&in,&kp,s);
return found;
}
int overlay_route_dump()
{
int bin,slot,o,n,i;
time_ms_t now = gettime_ms();
strbuf b = strbuf_alloca(8192);
strbuf_sprintf(b,"Overlay Local Identities\n------------------------\n");
int cn,in,kp;
for(cn=0;cn<keyring->context_count;cn++)
for(in=0;in<keyring->contexts[cn]->identity_count;in++)
for(kp=0;kp<keyring->contexts[cn]->identities[in]->keypair_count;kp++)
if (keyring->contexts[cn]->identities[in]->keypairs[kp]->type
==KEYTYPE_CRYPTOBOX)
{
for(i=0;i<SID_SIZE;i++)
strbuf_sprintf(b,"%02x",keyring->contexts[cn]->identities[in]
->keypairs[kp]->public_key[i]);
strbuf_sprintf(b,"\n");
}
DEBUG(strbuf_str(b));
strbuf_reset(b);
strbuf_sprintf(b,"\nOverlay Neighbour Table\n------------------------\n");
for(n=0;n<overlay_neighbour_count;n++)
if (overlay_neighbours[n].node)
{
strbuf_sprintf(b," %s* : %lldms ago :",
alloca_tohex(overlay_neighbours[n].node->sid, 7),
(long long)(now - overlay_neighbours[n].last_observation_time_ms));
for(i=0;i<OVERLAY_MAX_INTERFACES;i++)
if (overlay_neighbours[n].scores[i])
strbuf_sprintf(b," %d(via #%d)",
overlay_neighbours[n].scores[i],i);
strbuf_sprintf(b,"\n");
}
DEBUG(strbuf_str(b));
strbuf_reset(b);
strbuf_sprintf(b,"Overlay Mesh Route Table\n------------------------\n");
for(bin=0;bin<overlay_bin_count;bin++)
for(slot=0;slot<overlay_bin_size;slot++)
{
if (!overlay_nodes[bin][slot].sid[0]) continue;
strbuf_sprintf(b," %s* : %d :", alloca_tohex(overlay_nodes[bin][slot].sid, 7),
overlay_nodes[bin][slot].best_link_score);
for(o=0;o<OVERLAY_MAX_OBSERVATIONS;o++)
{
if (overlay_nodes[bin][slot].observations[o].observed_score)
{
overlay_node_observation *ob=&overlay_nodes[bin][slot].observations[o];
if (ob->corrected_score)
strbuf_sprintf(b," %d/%d via %s*",
ob->corrected_score,ob->gateways_en_route,
alloca_tohex(ob->sender_prefix, 7));
}
}
strbuf_sprintf(b,"\n");
}
DEBUG(strbuf_str(b));
return 0;
}
int max(int a,int b)
{
if (a>b) return a; else return b;
}
/*
We want to progressivelly update all routes as we go along, updating a few nodes
every call, so that no one call takes too long. This is important since we don't
want to add any excessive delays that might upset delay-sensitive voice and video
traffic.
*/
int overlay_route_tick_next_neighbour_id=0;
int overlay_route_tick_neighbour_bundle_size=1;
int overlay_route_tick_next_node_bin_id=0;
int overlay_route_tick_node_bundle_size=1;
void overlay_route_tick(struct sched_ent *alarm)
{
int n;
time_ms_t start_time = gettime_ms();
if (debug&DEBUG_OVERLAYROUTING)
DEBUGF("Neighbours: %d@%d, Nodes: %d@%d",
overlay_route_tick_neighbour_bundle_size,overlay_route_tick_next_neighbour_id,
overlay_route_tick_node_bundle_size,overlay_route_tick_next_node_bin_id);
/* Go through some of neighbour list */
// TODO This doesn't seem to be reliable
// note that neighbour metrics are now re-calculated in overlay_get_nexthop when we need them
n=overlay_route_tick_neighbour_bundle_size;
if (n<1) n=1;
while(n--)
{
overlay_route_tick_neighbour(overlay_route_tick_next_neighbour_id++,start_time);
if (overlay_route_tick_next_neighbour_id>=overlay_neighbour_count) overlay_route_tick_next_neighbour_id=0;
}
/* Tweak neighbour bundle size to spread it out over the required time.
XXX Does this behave correctly when there are no neighbours? */
time_ms_t neighbour_time = gettime_ms() - start_time;
if (neighbour_time>2) overlay_route_tick_neighbour_bundle_size/=neighbour_time;
else if (neighbour_time==0) overlay_route_tick_neighbour_bundle_size*=2;
if (overlay_route_tick_neighbour_bundle_size<1) overlay_route_tick_neighbour_bundle_size=1;
if (overlay_route_tick_neighbour_bundle_size>overlay_neighbour_count)
overlay_route_tick_neighbour_bundle_size=overlay_neighbour_count;
/* Go through some of node list */
n=overlay_route_tick_node_bundle_size;
if (n<1) n=1;
while(n--)
{
int slot;
for(slot=0;slot<overlay_bin_size;slot++) {
overlay_route_tick_node(overlay_route_tick_next_node_bin_id,slot,start_time);
}
overlay_route_tick_next_node_bin_id++;
if (overlay_route_tick_next_node_bin_id>=overlay_bin_count) overlay_route_tick_next_node_bin_id=0;
}
/* Tweak neighbour bundle size to spread it out over the required time.
Allow 2ms here instead of 1ms, as neighbour processing may have taken the
bulk of the tick. */
time_ms_t node_time = gettime_ms() - neighbour_time - start_time;
if (node_time>1) overlay_route_tick_node_bundle_size/=node_time;
else if (node_time==0) overlay_route_tick_node_bundle_size*=2;
if (overlay_route_tick_node_bundle_size<1) overlay_route_tick_node_bundle_size=1;
/* Limit bundle sizes to sanity */
if (overlay_route_tick_neighbour_bundle_size>overlay_neighbour_count
&&overlay_neighbour_count)
overlay_route_tick_neighbour_bundle_size=overlay_neighbour_count;
if (overlay_route_tick_node_bundle_size>overlay_bin_count)
overlay_route_tick_node_bundle_size=overlay_bin_count;
/* Work out how long to have between route ticks to make sure we update all route scores
every 5 seconds. */
int ticks=max(overlay_neighbour_count
?overlay_neighbour_count/overlay_route_tick_neighbour_bundle_size:0,
overlay_bin_count/overlay_route_tick_node_bundle_size);
if (ticks<1) ticks=1;
if (ticks>5000) ticks=5000;
int interval=5000/ticks;
if (debug&DEBUG_OVERLAYROUTING) DEBUGF("route tick interval = %dms (%d ticks per 5sec, neigh=%lldms, node=%lldms)",interval,ticks,neighbour_time,node_time);
/* Update callback interval based on how much work we have to do */
alarm->alarm = gettime_ms()+interval;
alarm->deadline = alarm->alarm+100;
schedule(alarm);
return;
}
/* Ticking neighbours is easy; we just pretend we have heard from them again,
and recalculate the score that way, which already includes a mechanism for
taking into account the age of the most recent observation */
int overlay_route_tick_neighbour(int neighbour_id, time_ms_t now)
{
if (neighbour_id>0)
if (overlay_route_recalc_neighbour_metrics(&overlay_neighbours[neighbour_id],now))
WHY("overlay_route_recalc_neighbour_metrics() failed");
return 0;
}
/* Updating the route score to get to a node it trickier, as they might not be a
neighbour. Even if they are a neighbour, all we have to go on is the node's
observations.
From these we can work out a discounted score based on their age.
XXX This is where the discounting should be modified for nodes that are
updated less often as they exhibit score stability. Actually, for the
most part we can tolerate these without any special action, as their high
scores will keep them reachable for longer anyway.
*/
int overlay_route_tick_node(int bin,int slot, time_ms_t now)
{
return overlay_route_recalc_node_metrics(&overlay_nodes[bin][slot],now);
}
int overlay_route_node_info(overlay_mdp_frame *mdp,
struct sockaddr_un *addr,int addrlen)
{
int bin,slot,n;
time_ms_t now = gettime_ms();
if (0)
DEBUGF("Looking for node %s* (prefix len=0x%x)",
alloca_tohex(mdp->nodeinfo.sid, mdp->nodeinfo.sid_prefix_length),
mdp->nodeinfo.sid_prefix_length
);
mdp->nodeinfo.foundP=0;
/* check if it is a local identity */
int cn,in,kp;
for(cn=0;cn<keyring->context_count;cn++)
for(in=0;in<keyring->contexts[cn]->identity_count;in++)
for(kp=0;kp<keyring->contexts[cn]->identities[in]->keypair_count;kp++)
if (keyring->contexts[cn]->identities[in]->keypairs[kp]->type
==KEYTYPE_CRYPTOBOX)
{
if (!memcmp(&mdp->nodeinfo.sid[0],
&keyring->contexts[cn]->identities[in]
->keypairs[kp]->public_key[0],
mdp->nodeinfo.sid_prefix_length/2))
{
if (mdp->nodeinfo.count==mdp->nodeinfo.index)
{
mdp->nodeinfo.foundP=1;
mdp->nodeinfo.localP=1;
mdp->nodeinfo.neighbourP=0;
mdp->nodeinfo.time_since_last_observation = 0;
mdp->nodeinfo.score=256;
mdp->nodeinfo.interface_number=-1;
bcopy(&keyring->contexts[cn]->identities[in]
->keypairs[kp]->public_key[0],
&mdp->nodeinfo.sid[0],SID_SIZE);
mdp->nodeinfo.did[0]=0;
if (mdp->nodeinfo.resolve_did) {
mdp->nodeinfo.resolve_did=0;
int k2;
for(k2=0;k2<keyring->contexts[cn]->identities[in]
->keypair_count;k2++)
if (keyring->contexts[cn]->identities[in]->keypairs[k2]->type
==KEYTYPE_DID)
{
/* private key field has unpacked did */
bcopy(&keyring->contexts[cn]->identities[in]
->keypairs[k2]->private_key[0],
&mdp->nodeinfo.did[0],
keyring->contexts[cn]->identities[in]
->keypairs[k2]->private_key_len);
/* public key has name */
bcopy(&keyring->contexts[cn]->identities[in]
->keypairs[k2]->public_key[0],
&mdp->nodeinfo.name[0],
keyring->contexts[cn]->identities[in]
->keypairs[k2]->public_key_len);
mdp->nodeinfo.resolve_did=1;
}
}
}
mdp->nodeinfo.count++;
}
}
/* check neighbour table, i.e., if directly connected */
for(n=0;n<overlay_neighbour_count;n++)
if (overlay_neighbours[n].node)
{
if (!memcmp(&mdp->nodeinfo.sid[0],
&overlay_neighbours[n].node->sid[0],
mdp->nodeinfo.sid_prefix_length/2))
{
if (mdp->nodeinfo.count==mdp->nodeinfo.index)
{
mdp->nodeinfo.foundP=1;
mdp->nodeinfo.localP=0;
mdp->nodeinfo.neighbourP=1;
mdp->nodeinfo.time_since_last_observation = gettime_ms() - overlay_neighbours[n].last_observation_time_ms;
mdp->nodeinfo.score=-1;
mdp->nodeinfo.interface_number=-1;
mdp->nodeinfo.resolve_did=0;
int i;
for(i=0;i<OVERLAY_MAX_INTERFACES;i++)
if (overlay_neighbours[n].scores[i]>mdp->nodeinfo.score)
{
mdp->nodeinfo.score=overlay_neighbours[n].scores[i];
mdp->nodeinfo.interface_number=i;
}
bcopy(&overlay_neighbours[n].node->sid[0],
&mdp->nodeinfo.sid[0],SID_SIZE);
}
mdp->nodeinfo.count++;
}
}
/* check if it is an indirectly connected node that we know about */
for(bin=0;bin<overlay_bin_count;bin++)
for(slot=0;slot<overlay_bin_size;slot++)
{
if (!overlay_nodes[bin][slot].sid[0]) continue;
if (!memcmp(&mdp->nodeinfo.sid[0],
&overlay_nodes[bin][slot].sid[0],
mdp->nodeinfo.sid_prefix_length/2))
{
if (mdp->nodeinfo.count==mdp->nodeinfo.index)
{
mdp->nodeinfo.foundP=1;
mdp->nodeinfo.localP=0;
mdp->nodeinfo.neighbourP=0;
mdp->nodeinfo.time_since_last_observation = gettime_ms();
mdp->nodeinfo.score=-1;
mdp->nodeinfo.interface_number=-1;
mdp->nodeinfo.resolve_did=0;
int o;
for(o=0;o<OVERLAY_MAX_OBSERVATIONS;o++)
if (overlay_nodes[bin][slot].observations[o].observed_score)
{
overlay_node_observation *ob
=&overlay_nodes[bin][slot].observations[o];
if (ob->corrected_score>mdp->nodeinfo.score) {
mdp->nodeinfo.score=ob->corrected_score;
}
if (now - ob->rx_time < mdp->nodeinfo.time_since_last_observation)
mdp->nodeinfo.time_since_last_observation = now - ob->rx_time;
}
bcopy(&overlay_nodes[bin][slot].sid[0],
&mdp->nodeinfo.sid[0],SID_SIZE);
}
mdp->nodeinfo.count++;
}
}
return overlay_mdp_reply(mdp_named.poll.fd,addr,addrlen,mdp);
}
Reference in New Issue View Git Blame Copy Permalink