Trigger names cannot exceed 11 characters on OS X, so the new "config_change" trigger
has been renamed to "conf_change" and the "config_change_log" trigger has been renamed
to "conf_log".
Renamed libservald.so to libservaldaemon.so everywhere to avoid conflicts
with the "servald" module name in Android.mk, and to avoid the overly
generic name "libserval".
Include the JNI entry points in the Android build.
If an exception was raised while executing a CLI command via JNI, then
a warning was logged while cleaning up: calling GetObjectArrayElement()
while an exception is pending. This fix removes that call.
swiftc(1) requires every -D option to be prefixed with -Xcc, which
is not easy to achieve using autoconf.
Now instead of setting configuration macros like HAVE_LSEEK64 on the
command line using -D, they are defined in config.h, which is generated
by ./configure, ignored by Git, and included by all headers and source
files that use any configuration macro.
The dependency on Makefile has been replaced with a dependency on
Makefile.in and config.h, which helps avoid some redundant full
recompiles after running ./configure, because the configure script
does not overwrit config.h if its content does not change.
Recent changes such as the Makefile.in overhaul and the introduction of
feature-driven linking broke the Android build. This commit fixes the
breakage:
- detects the presence of gettid() in configure.ac and only defines
gettid() in serval.c if HAVE_GETTID is not defined
- builds libserval.so not libservald.so on Android, to avoid a conflict
on the module name "servald" in Android.mk
- renames cli_cleanup() to command_cleanup(), defines it in
commandline.h instead of cli.h, and supplies it in android.c
- supplies the 'keyring' global in android.c
- removes log_stderr.c from the Android build, since it conflicted with
log.c
Very occasionally, when the file logger was creating the symlink from
'serval.log' to the current log file, there was a race with another
process doing exactly the same, causing one of them to log an
symlink-failed ERROR that caused the server/StartTwice test to fail
(when asserting that the "start" command contained no ERROR log
messages). Now the symlink failure is logged at WARN level, which will
not cause the test to fail.
During the brief interval between a server creating its pidfile and
locking it, the pidfile could be removed by another process that
detected it as stale. This caused a non-deterministic failure of the
server/StartTwice test case.
To fix this race, the server now creates and locks a temporary pidfile
which it then hard-links to the real pidfile, guaranteeing that the
pidfile is already locked in the instant that it appears. This means
that an unlocked pidfile is guaranteed to be stale, not just in the
process of creation, so can be safely unlinked by any other process.
This introduces a new way of linking Serval executables and dynamic
libraries from static libraries like libservald.a -- called
"feature-driven" linking.
The Makefile now links servald and serval-tests from libservald.a,
rather than from an explicit list of object (.o) files. Thanks to the
section-based method for registering functions such as HTTP handlers,
CLI commands and MDP handlers, these object files had become
"stand-alone" and hence were no longer included in the link because
there was no unresolved reference that required them to be linked in.
The new "feature.h" provides the DECLARE_FEATURE(name) macro that each
stand-alone source file uses to declare the named feature(s) it
provides. Each executable can call the USE_FEATURE(name) macro in any
of its explicitly-linked source files to cause the corresponding
object(s) to be included in the link, eg, servald_features.c.
The DEFINE_BINDING() macro has been extended so that every individual
MDP binding is given a feature name based on its port number macro, eg,
"mdp_binding_MDP_PORT_ECHO".
Some features have been factored into their own separate source files so
they can be omitted or included in a build independently of each other:
- the MDP bindings for MDP_PORT_DNALOOKUP, MDP_PORT_ECHO,
MDP_PORT_TRACE, MDP_PORT_KEYMAPREQUEST, MDP_PORT_RHIZOME_xxx,
MDP_PORT_PROBE, MDP_PORT_STUN, MDP_PORT_STUNREQ
- the CLI "log" and "echo" commands
- the CLI "rhizome direct" command
The JNI source files are only compiled if the <jni.h> header is present,
otherwise they are omitted from libservald.so.
This is required to support feature-driven linking, in which the exact
list of which functions to call in response to a configuration re-load
is not known until link time.
The "config_change_log" trigger is called before "config_change", so
that the logger can respond to the change before other subsystems.
Add the --branch option to specify which libsodium branch to checkout
and build.
Invoke libsodium's autogen.sh script if libsodium's 'configure' script
is not present (eg, on development branches).
The 'dst' parameter is now (char *) instead of (unsigned char *) because
in general it is used to produce human-readable (ASCII) strings, not
binary data.
The CLI and server main loop now have no conditional JNI code. All JNI
code has been moved into separate source files, which #include the new
"jni_common.h" instead of <jni.h>. The "cli.h" header no longer
includes <jni.h>, so the rest of the Serval source code is now
unaffected by JNI definitions.
The 'cf_limbo' global variable is now thread-local, so that each thread
has its own independent copy of the loaded configuration. The JNI
server entry point now calls cf_init() once. The new 'cf_initialised'
flag prevents clobbering the config state by redundant calls to
cf_init().
The CLI "stop" command now sends SIGHUP to the specific thread in which
the server is running. This is achieved by writing the PID and TID
(Linux Thread ID) into the pidfile, separated by a space, on systems
that support the Linux gettid() and tgkill() system calls. The server's
signal handler has been overhauled, and its logging improved.
Changed the built libraries and updated INSTALL.md accordingly:
- the 'servaldwrap' executable is now built
- libservald.[a,so] now contains the full daemon executable
- libservalclient.[a,so] contains the client library
- libserval.a is no longer built
Building the 'servaldwrap' executable is a step towards ensuring that
the libservald.so library can be linked and executed, without requiring
an Android build to reveal any failure.
Added the SOURCE_PREFIX variable that allows the make to be invoked from
within any current working directory, not just the serval-dna
repository's root directory.
Fixed the serval_version.o target to invoke the version_string.sh
script with the --repository=DIR option, so that the build will work
even if the current working directory is not within the serval-dna
repository.
Re-ordered and added some comments for clarity, and added some missing
.PHONY declarations.
The execute() and executeOk() functions now set $TFWEXECUTED instead
of $executed.
The execute() and executeOk() functions now make a hard link from the
--stdout-file=PATH and --stderr-file=PATH files to the default files
of 'stdout' and 'stderr' so that post-fork handling can still cat their
contents into the log file.
The fork() function now sets the variables $TFWFORKSTDOUT_<label>
$TFWFORKSTDERR_<label> $TFWFORKPID_<label>.
Ignores a variety of warnings when compiling sqlite3.c.
Uses the new sqlite3_trace_v2() function for logging SQL statements, now
that sqlite3_trace() and sqlite3_profile() are deprecated.
Fixes a rhizomeops test failure caused because SQLite 3.12 increased the
default block size from 1024 to 4096, causing the fixed overhead of an
empty Rhizome db to exceed 32KB. This caused the test to fail because
the first "file add" failed. Now the test fixture adapts to the fixed
overhead.
Deletes the SQLite 3.10.2 source amalgamation.
