Jeremy Lakeman
a59b306173
Allow for out of order packets, reduce link state spam
2013-05-08 11:37:31 +09:30
Jeremy Lakeman
f405ba5337
Send sequence number on all broadcast frames
2013-05-03 16:23:23 +09:30
Jeremy Lakeman
9ee09e36a0
Replace old routing engine with new link state engine
2013-05-02 14:29:28 +09:30
gardners
2252fdcaa7
created tool for automatically finding IN()s without matching
...
OUT()s or where return() is used instead of RETURN().
Added OUT() to end of all functions using IN() that lacked it to
make it easier to statically analyse this invariant.
Fixed several return instead of RETURNs detected through use of
this tool. #49
2013-02-20 16:18:56 +10:30
gardners
f465f3a9ee
Add lots of profiling to assist in debugging
...
- made some debug output conditional.
- make it possible to debug slip decoding without getting swamped by other output.
- Improve reporting of unnamed schedule() calls.
- always collect performance statistics, and report on any excess
use (>1sec in every 3), even if debug.timing is not enabled.
- include file size information in Rhizome transfer messages.
- reduce output when debug.rhizome_rx is set.
2013-02-20 15:36:30 +10:30
Jeremy Lakeman
6d9bbe2e2c
Refactor interface handling to separate encapsulation from stream type
2013-02-20 15:36:23 +10:30
Jeremy Lakeman
ba1800012e
Only advertise BAR's on an alarm
...
- we no longer hit the database for every outgoing packet, attempting to announce bundles
- we no longer advertise manifests periodically
- when an interesting bar arrives, we ask for the manifest to be announced, which uses the existing packet format
2013-02-20 15:36:23 +10:30
Jeremy Lakeman
c7caec488a
Don't aggregate packets together on radio links
2013-02-20 15:36:23 +10:30
Jeremy Lakeman
84ad4debfa
Throttle serial radio devices when tx buffer is in use
2013-02-20 15:36:22 +10:30
Jeremy Lakeman
b35c1aca43
Specify that unicast traffic should use unicast UDP packets
2013-01-29 11:57:13 +11:00
Jeremy Lakeman
88f7fef992
Reduce priority of rhizome on MDP, stop sooner when packet queues fill
2013-01-28 13:35:24 +11:00
Jeremy Lakeman
9a78e16625
Use payload queue for periodic route advertisements
2012-12-19 12:36:28 +10:30
Jeremy Lakeman
1b1af90924
Improve vomp quality under ideal & low bandwidth use
2012-12-19 10:40:48 +10:30
Jeremy Lakeman
82db15db5b
Use any packet as a self-announce
...
Stop sending OF_TYPE_SELFANNOUNCE
Deprecate OF_TYPE_DATA_VOICE
Tweak payload priorities
Don't allow client applications to send high priority payloads
2012-12-16 10:09:29 +10:30
Jeremy Lakeman
55be5208a9
Remove packet queue delays, rely on network limits
2012-12-14 17:11:57 +10:30
Jeremy Lakeman
e517e3a59e
Add per-interface packet transmit limits
2012-12-14 17:07:28 +10:30
Jeremy Lakeman
f41830ebfb
Add interface and sequence flags to packet format
2012-12-14 17:07:27 +10:30
Andrew Bettison
7d970d8f92
Merge branch 'newconfig' into 'master'
2012-12-11 17:21:56 +10:30
Andrew Bettison
5985df751d
Overhaul debug flags
...
Replace debugflags_t and DEBUG_XXX bit masks with config schema "debug.xxx"
entries.
No more support for "debug.all".
2012-12-11 15:59:46 +10:30
Jeremy Lakeman
5798e5acb5
Always send scan packets with full sid
2012-12-11 13:32:02 +10:30
Andrew Bettison
8425882ffc
Merge branch 'newconfig' into 'master'
...
Conflicts:
commandline.c
conf.h
dataformats.c
log.h
overlay_address.c
overlay_interface.c
packetformats.c
rhizome.c
serval.h
tests/directory_service
vomp_console.c
2012-12-07 14:09:55 +10:30
Jeremy Lakeman
383cc2371d
Record packet timing info
2012-12-05 15:36:46 +10:30
Jeremy Lakeman
5c7eb4a594
Add unicast probe packets
...
Probe directory service instead of assuming that it is always reachable
Fix directory service and routing tests
2012-12-04 14:47:57 +10:30
Jeremy Lakeman
a67e4114a8
Allow for payloads with a pre-determined destination
2012-12-03 13:44:31 +10:30
Jeremy Lakeman
d5f78bcffe
Rework reachable link flags for simpler bitmask tests
2012-11-30 14:38:09 +10:30
Jeremy Lakeman
0e0137e968
Hide some buffer implementations details
2012-11-28 15:45:09 +10:30
Jeremy Lakeman
24a3ed1469
Simplify address abbreviation format and interface
2012-11-28 15:44:39 +10:30
Jeremy Lakeman
54f9d9b0e0
Rely on please explain, don't send too many full sids
2012-11-28 15:44:39 +10:30
Jeremy Lakeman
9939400c82
Remove dead code
2012-11-28 15:44:33 +10:30
Jeremy Lakeman
a84022bc24
Change header to include sender id
2012-11-28 15:43:57 +10:30
Jeremy Lakeman
ce63e96db2
Use decode structure for tracking previous sid
2012-11-28 15:43:57 +10:30
Jeremy Lakeman
3d14e2f3db
Hide more information about packet headers
2012-11-28 15:43:56 +10:30
Jeremy Lakeman
4ca6db34d6
Encapsulate payload header details
2012-11-28 15:40:39 +10:30
Jeremy Lakeman
00e1a59ca8
Fix compilation errors
2012-11-22 10:55:54 +10:30
Jeremy Lakeman
36cee7e9bc
Move payload queueing functions to separate .c file
2012-11-21 11:02:00 +10:30
