mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
ff2382e36c
wave-1: 2019-05-09: Tweak rate-ctrl: Ramp PER up faster, down slower. This helps throughput in rate-vs-range test, especially with nss1. 2019-05-20: Disable adaptive-CCA. I am not sure it helps, and it may make it slower to detect noise that should tell the system to stop transmitting. If someone has means to test this properly, I'd be happy to work with them. wave-2: 2019-05-15: Fix problem where rate-ctrl sometimes used rix of 0x0. 2019-05-15: Allow raw-tx of encrypted frame. Requires a patch to the driver to use raw mode when skb has WEP flag enabled AND skb is flagged to not be encrypted. Lightly tested. 2019-05-16: Fix tx-hang that happened when rate-ctrl chose an OFDM rate for 20Mhz and sent that as AMPDU. To fix, limit to (V)HT rates if peer is (V)HT. It seems that MCS0 (V)HT20 should have as good of a chance of being detected as CCK or OFDM. 2019-06-06: Disable TX-BFEE, TX-BFER for IBSS connections. I suspect this is part of the tx-hang issue seen with IBSS between two 9984 radios. 2019-06-12: Fix rx-rate reporting in 'fw_stats' logic. This was at least partly due to regressions I had added earlier when working on some multi-vdev enhancements. 2019-6-12: Fix case where extd peer-stats were not always populated. The stats gathering code did not handle error conditions well. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
629 lines
22 KiB
Makefile
629 lines
22 KiB
Makefile
#
|
|
# Copyright (C) 2015 OpenWrt.org
|
|
#
|
|
# This is free software, licensed under the GNU General Public License v2.
|
|
# See /LICENSE for more information.
|
|
#
|
|
|
|
include $(TOPDIR)/rules.mk
|
|
|
|
PKG_NAME:=ath10k-firmware
|
|
PKG_SOURCE_DATE:=2018-10-10
|
|
PKG_SOURCE_VERSION:=d366b80d41309531c0c98b26625f23e318f33e31
|
|
PKG_MIRROR_HASH:=ec06f10e6b1d4f7a28366a893c8a73a000454c2f031fc747381a1fb8aa1e0846
|
|
PKG_RELEASE:=1
|
|
|
|
PKG_SOURCE_PROTO:=git
|
|
PKG_SOURCE_URL:=https://github.com/kvalo/ath10k-firmware.git
|
|
|
|
PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
|
|
|
|
include $(INCLUDE_DIR)/package.mk
|
|
|
|
define Package/ath10k-firmware-default
|
|
SECTION:=firmware
|
|
CATEGORY:=Firmware
|
|
URL:=$(PKG_SOURCE_URL)
|
|
DEPENDS:=
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca9887
|
|
$(Package/ath10k-firmware-default)
|
|
TITLE:=ath10k firmware for QCA9887 devices
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca9888
|
|
$(Package/ath10k-firmware-default)
|
|
TITLE:=ath10k firmware for QCA9888 devices
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca9887-ct
|
|
$(Package/ath10k-firmware-default)
|
|
TITLE:=ath10k-CT firmware for QCA9887 devices
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca988x
|
|
$(Package/ath10k-firmware-default)
|
|
TITLE:=ath10k firmware for QCA988x devices
|
|
SECTION:=firmware
|
|
CATEGORY:=Firmware
|
|
endef
|
|
|
|
CT_FIRMWARE_FILE = $(1)-$($(1)_FIRMWARE_FILE_CT)
|
|
CT_FIRMWARE_FILE_HTT = $(1)-$($(1)_FIRMWARE_FILE_CT_HTT)
|
|
|
|
define Download/ct-firmware
|
|
URL:=https://www.candelatech.com/downloads/$(2)
|
|
FILE:=$(call CT_FIRMWARE_FILE,$(1))
|
|
URL_FILE:=$($(1)_FIRMWARE_FILE_CT)
|
|
endef
|
|
|
|
define Download/ct-firmware-htt
|
|
URL:=https://www.candelatech.com/downloads/$(2)
|
|
FILE:=$(call CT_FIRMWARE_FILE_HTT,$(1))
|
|
URL_FILE:=$($(1)_FIRMWARE_FILE_CT_HTT)
|
|
endef
|
|
|
|
QCA988X_FIRMWARE_FILE_CT:=firmware-2-ct-full-community-22.bin.lede.009
|
|
define Download/ath10k-firmware-qca988x-ct
|
|
$(call Download/ct-firmware,QCA988X,)
|
|
HASH:=d4ba8b386be0eda7e1e0ea1653e40a9776c9a5eeb4e7fef656466da30628b17b
|
|
endef
|
|
$(eval $(call Download,ath10k-firmware-qca988x-ct))
|
|
|
|
QCA988X_FIRMWARE_FILE_CT_HTT:=firmware-2-ct-full-htt-mgt-community-22.bin.lede.009
|
|
define Download/ath10k-firmware-qca988x-ct-htt
|
|
$(call Download/ct-firmware-htt,QCA988X,)
|
|
HASH:=12155e9599194c8274d6a96c603f00723b5f036fe8e4c1518ee64cac529a9b34
|
|
endef
|
|
$(eval $(call Download,ath10k-firmware-qca988x-ct-htt))
|
|
|
|
|
|
QCA9887_FIRMWARE_FILE_CT:=firmware-2-ct-full-community-22.bin.lede.009
|
|
define Download/ath10k-firmware-qca9887-ct
|
|
$(call Download/ct-firmware,QCA9887,ath10k-9887)
|
|
HASH:=9e1a2b30fc9f680ab1a42335b0091953fa600573a7376b2d67f1b4032f518644
|
|
endef
|
|
$(eval $(call Download,ath10k-firmware-qca9887-ct))
|
|
|
|
QCA9887_FIRMWARE_FILE_CT_HTT:=firmware-2-ct-full-htt-mgt-community-22.bin.lede.009
|
|
define Download/ath10k-firmware-qca9887-ct-htt
|
|
$(call Download/ct-firmware-htt,QCA9887,ath10k-9887)
|
|
HASH:=a19ea4bad001c1781d064114322502d5a612fb917e02480f971412e090d7f452
|
|
endef
|
|
$(eval $(call Download,ath10k-firmware-qca9887-ct-htt))
|
|
|
|
|
|
QCA99X0_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.009
|
|
define Download/ath10k-firmware-qca99x0-ct
|
|
$(call Download/ct-firmware,QCA99X0,ath10k-10-4b)
|
|
HASH:=5ad3315297ce3a9cce8706b79eae7783d269b76a56063685100c7e8cd3ff47e5
|
|
endef
|
|
$(eval $(call Download,ath10k-firmware-qca99x0-ct))
|
|
|
|
QCA99X0_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.009
|
|
define Download/ath10k-firmware-qca99x0-ct-htt
|
|
$(call Download/ct-firmware-htt,QCA99X0,ath10k-10-4b)
|
|
HASH:=52c5eebde1ef130273353630e7e91e4dfb638a7e9a3a74aaef44cdccb5ce5412
|
|
endef
|
|
$(eval $(call Download,ath10k-firmware-qca99x0-ct-htt))
|
|
|
|
|
|
QCA9984_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.009
|
|
define Download/ath10k-firmware-qca9984-ct
|
|
$(call Download/ct-firmware,QCA9984,ath10k-9984-10-4b)
|
|
HASH:=c54a53821d9b4fb36e69adb53277ad16e126afa692e5e488121c53cc39c7c4ba
|
|
endef
|
|
$(eval $(call Download,ath10k-firmware-qca9984-ct))
|
|
|
|
QCA9984_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.009
|
|
define Download/ath10k-firmware-qca9984-ct-htt
|
|
$(call Download/ct-firmware-htt,QCA9984,ath10k-9984-10-4b)
|
|
HASH:=7613d3387dc2d83759759bb14e25312c33f3984a11cd59e66ab2b0470f32abb6
|
|
endef
|
|
$(eval $(call Download,ath10k-firmware-qca9984-ct-htt))
|
|
|
|
|
|
QCA4019_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.009
|
|
define Download/ath10k-firmware-qca4019-ct
|
|
$(call Download/ct-firmware,QCA4019,ath10k-4019-10-4b)
|
|
HASH:=cec771a2f5f911a77b1f254a113de67cc68edc5d02dc06c7fddbccb448340b55
|
|
endef
|
|
$(eval $(call Download,ath10k-firmware-qca4019-ct))
|
|
|
|
QCA4019_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.009
|
|
define Download/ath10k-firmware-qca4019-ct-htt
|
|
$(call Download/ct-firmware-htt,QCA4019,ath10k-4019-10-4b)
|
|
HASH:=aff872b4e6f4f7eb000518d3ff4056565a076b81a9dd3ce8f382ceeab7f069c3
|
|
endef
|
|
$(eval $(call Download,ath10k-firmware-qca4019-ct-htt))
|
|
|
|
|
|
QCA9888_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.009
|
|
define Download/ath10k-firmware-qca9888-ct
|
|
$(call Download/ct-firmware,QCA9888,ath10k-9888-10-4b)
|
|
HASH:=c307c9cd44f650be9504b44786245381b0b88a4348fce85c76a6993fdc8e9e13
|
|
endef
|
|
$(eval $(call Download,ath10k-firmware-qca9888-ct))
|
|
|
|
QCA9888_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.009
|
|
define Download/ath10k-firmware-qca9888-ct-htt
|
|
$(call Download/ct-firmware-htt,QCA9888,ath10k-9888-10-4b)
|
|
HASH:=1a419f99d8283042434ed2de86e8aba85b9941ff3c75ab0805d71f4c108e272f
|
|
endef
|
|
$(eval $(call Download,ath10k-firmware-qca9888-ct-htt))
|
|
|
|
|
|
define Package/ath10k-firmware-qca99x0
|
|
$(Package/ath10k-firmware-default)
|
|
TITLE:=ath10k firmware for QCA99x0 devices
|
|
SECTION:=firmware
|
|
CATEGORY:=Firmware
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca988x-ct
|
|
$(Package/ath10k-firmware-default)
|
|
TITLE:=ath10k CT 10.1 firmware for QCA988x devices
|
|
SECTION:=firmware
|
|
CATEGORY:=Firmware
|
|
PROVIDES:=ath10k-firmware-qca988x
|
|
endef
|
|
define Package/ath10k-firmware-qca988x-ct-htt
|
|
$(Package/ath10k-firmware-default)
|
|
TITLE:=ath10k CT 10.1 htt-mgt fw for QCA988x
|
|
SECTION:=firmware
|
|
CATEGORY:=Firmware
|
|
PROVIDES:=ath10k-firmware-qca988x
|
|
DEPENDS:=+kmod-ath10k-ct
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca9887-ct
|
|
$(Package/ath10k-firmware-default)
|
|
TITLE:=ath10k CT 10.1 firmware for QCA9887 devices
|
|
SECTION:=firmware
|
|
CATEGORY:=Firmware
|
|
PROVIDES:=ath10k-firmware-qca9887
|
|
endef
|
|
define Package/ath10k-firmware-qca9887-ct-htt
|
|
$(Package/ath10k-firmware-default)
|
|
TITLE:=ath10k CT 10.1 htt-mgt fw for QCA9887
|
|
SECTION:=firmware
|
|
CATEGORY:=Firmware
|
|
PROVIDES:=ath10k-firmware-qca9887
|
|
DEPENDS:=+kmod-ath10k-ct
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca988x-ct/description
|
|
Alternative ath10k firmware for QCA988X from Candela Technologies.
|
|
Enables IBSS and other features. See:
|
|
http://www.candelatech.com/ath10k-10.1.php
|
|
This firmware will NOT be used unless the standard ath10k-firmware-qca988x
|
|
is un-selected since the driver will try to load firmware-5.bin before
|
|
firmware-2.bin
|
|
endef
|
|
define Package/ath10k-firmware-qca988x-ct-htt/description
|
|
Alternative ath10k firmware for QCA988X from Candela Technologies.
|
|
Uses normal HTT TX data path for management frames, which improves
|
|
stability in busy networks and fixes .11r authentication.
|
|
Enables IBSS and other features. See:
|
|
http://www.candelatech.com/ath10k-10.1.php
|
|
This firmware selects and requires the ath10k-ct driver.
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca9887-ct/description
|
|
Alternative ath10k firmware for QCA9887 from Candela Technologies.
|
|
Enables IBSS and other features. See:
|
|
http://www.candelatech.com/ath10k-10.1.php
|
|
This firmware conflicts with the standard 9887 firmware, so select only
|
|
one.
|
|
endef
|
|
define Package/ath10k-firmware-qca9887-ct-htt/description
|
|
Alternative ath10k firmware for QCA9887 from Candela Technologies.
|
|
Uses normal HTT TX data path for management frames, which improves
|
|
stability in busy networks and fixes .11r authentication.
|
|
Enables IBSS and other features. See:
|
|
http://www.candelatech.com/ath10k-10.1.php
|
|
This firmware selects and requires the ath10k-ct driver.
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca99x0-ct/description
|
|
Alternative ath10k firmware for QCA99x0 from Candela Technologies.
|
|
Enables IBSS and other features. See:
|
|
http://www.candelatech.com/ath10k-10.4.php
|
|
This firmware conflicts with the standard 99x0 firmware, so select only
|
|
one.
|
|
endef
|
|
define Package/ath10k-firmware-qca99x0-ct-htt/description
|
|
Alternative ath10k firmware for QCA99x0 from Candela Technologies.
|
|
Uses normal HTT TX data path for management frames, which improves
|
|
stability in busy networks and may be required for .11r authentication.
|
|
Enables IBSS and other features. See:
|
|
http://www.candelatech.com/ath10k-10.4.php
|
|
This firmware selects and requires the ath10k-ct driver.
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca9984-ct/description
|
|
Alternative ath10k firmware for QCA9984 from Candela Technologies.
|
|
Enables IBSS and other features. See:
|
|
http://www.candelatech.com/ath10k-10.4.php
|
|
This firmware conflicts with the standard 9984 firmware, so select only
|
|
one.
|
|
endef
|
|
define Package/ath10k-firmware-qca9984-ct-htt/description
|
|
Alternative ath10k firmware for QCA9984 from Candela Technologies.
|
|
Uses normal HTT TX data path for management frames, which improves
|
|
stability in busy networks and may be required for .11r authentication.
|
|
Enables IBSS and other features. See:
|
|
http://www.candelatech.com/ath10k-10.4.php
|
|
This firmware selects and requires the ath10k-ct driver.
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca4019-ct/description
|
|
Alternative ath10k firmware for IPQ4019 radio from Candela Technologies.
|
|
Enables IBSS and other features. Works with standard or ath10k-ct driver.
|
|
See: http://www.candelatech.com/ath10k-10.4.php
|
|
endef
|
|
define Package/ath10k-firmware-qca4019-ct-htt/description
|
|
Alternative ath10k firmware for IPQ4019 radio from Candela Technologies.
|
|
Uses normal HTT TX data path for management frames, which improves
|
|
stability in busy networks and may be required for .11r authentication.
|
|
Enables IBSS and other features.
|
|
See: http://www.candelatech.com/ath10k-10.4.php
|
|
This firmware selects and requires the ath10k-ct driver.
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca9888-ct/description
|
|
Alternative ath10k firmware for QCA9886 and QCA9888 from Candela Technologies.
|
|
Enables IBSS and other features. See:
|
|
http://www.candelatech.com/ath10k-10.4.php
|
|
This firmware conflicts with the standard 9886 and 9888 firmware, so select only
|
|
one.
|
|
endef
|
|
define Package/ath10k-firmware-qca9888-ct-htt/description
|
|
Alternative ath10k firmware for QCA9886 and QCA9888 from Candela Technologies.
|
|
Uses normal HTT TX data path for management frames, which improves
|
|
stability in busy networks and may be required for .11r authentication.
|
|
Enables IBSS and other features. See:
|
|
http://www.candelatech.com/ath10k-10.4.php
|
|
This firmware selects and requires the ath10k-ct driver.
|
|
endef
|
|
|
|
|
|
define Package/ath10k-firmware-qca99x0/description
|
|
Standard ath10k firmware for QCA99x0 from QCA
|
|
This firmware conflicts with the CT 99x0 firmware, so select only
|
|
one.
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca99x0-ct
|
|
$(Package/ath10k-firmware-default)
|
|
TITLE:=ath10k CT 10.4 firmware for QCA99x0 devices
|
|
SECTION:=firmware
|
|
CATEGORY:=Firmware
|
|
PROVIDES:=ath10k-firmware-qca99x0
|
|
endef
|
|
define Package/ath10k-firmware-qca99x0-ct-htt
|
|
$(Package/ath10k-firmware-default)
|
|
TITLE:=ath10k CT 10.4 htt-mgt fw for QCA99x0
|
|
SECTION:=firmware
|
|
CATEGORY:=Firmware
|
|
PROVIDES:=ath10k-firmware-qca99x0
|
|
DEPENDS:=+kmod-ath10k-ct
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca9984-ct
|
|
$(Package/ath10k-firmware-default)
|
|
TITLE:=ath10k CT 10.4 firmware for QCA9984 devices
|
|
SECTION:=firmware
|
|
CATEGORY:=Firmware
|
|
PROVIDES:=ath10k-firmware-qca9984
|
|
endef
|
|
define Package/ath10k-firmware-qca9984-ct-htt
|
|
$(Package/ath10k-firmware-default)
|
|
TITLE:=ath10k CT 10.4 htt-mgt fw for QCA9984
|
|
SECTION:=firmware
|
|
CATEGORY:=Firmware
|
|
PROVIDES:=ath10k-firmware-qca9984
|
|
DEPENDS:=+kmod-ath10k-ct
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca4019-ct
|
|
$(Package/ath10k-firmware-default)
|
|
TITLE:=ath10k CT 10.4 firmware for QCA4018/9
|
|
SECTION:=firmware
|
|
CATEGORY:=Firmware
|
|
PROVIDES:=ath10k-firmware-qca4019
|
|
endef
|
|
define Package/ath10k-firmware-qca4019-ct-htt
|
|
$(Package/ath10k-firmware-default)
|
|
TITLE:=ath10k CT 10.4 htt-mgt for QCA4018/9
|
|
SECTION:=firmware
|
|
CATEGORY:=Firmware
|
|
PROVIDES:=ath10k-firmware-qca4019
|
|
DEPENDS:=+kmod-ath10k-ct
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca9888-ct
|
|
$(Package/ath10k-firmware-default)
|
|
TITLE:=ath10k CT 10.4 fw for QCA9886/8 devices
|
|
SECTION:=firmware
|
|
CATEGORY:=Firmware
|
|
PROVIDES:=ath10k-firmware-qca9888
|
|
endef
|
|
define Package/ath10k-firmware-qca9888-ct-htt
|
|
$(Package/ath10k-firmware-default)
|
|
TITLE:=ath10k CT 10.4 htt-mgt fw for QCA9886/8
|
|
SECTION:=firmware
|
|
CATEGORY:=Firmware
|
|
PROVIDES:=ath10k-firmware-qca9888
|
|
DEPENDS:=+kmod-ath10k-ct
|
|
endef
|
|
|
|
|
|
|
|
define Package/ath10k-firmware-qca9984
|
|
$(Package/ath10k-firmware-default)
|
|
TITLE:=ath10k firmware for QCA9984 devices
|
|
SECTION:=firmware
|
|
CATEGORY:=Firmware
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca4019
|
|
$(Package/ath10k-firmware-default)
|
|
TITLE:=ath10k firmware for IPQ/QCA4019 devices
|
|
SECTION:=firmware
|
|
CATEGORY:=Firmware
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca6174
|
|
$(Package/ath10k-firmware-default)
|
|
TITLE:=ath10k firmware for QCA6174 devices
|
|
SECTION:=firmware
|
|
CATEGORY:=Firmware
|
|
endef
|
|
|
|
QCA99X0_BOARD_REV:=ddcec9efd245da9365c474f513a855a55f3ac7fe
|
|
QCA99X0_BOARD_FILE:=board-2.bin.$(QCA99X0_BOARD_REV)
|
|
|
|
define Download/qca99x0-board
|
|
URL:=https://source.codeaurora.org/quic/qsdk/oss/firmware/ath10k-firmware/plain/ath10k/QCA99X0/hw2.0
|
|
URL_FILE:=board-2.bin?id=$(QCA99X0_BOARD_REV)
|
|
FILE:=$(QCA99X0_BOARD_FILE)
|
|
HASH:=03711ac21e60ef59d3815e235eb721c0c22851b5410299411085aa6f2af45401
|
|
endef
|
|
$(eval $(call Download,qca99x0-board))
|
|
|
|
define Build/Compile
|
|
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca4019/install
|
|
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA4019/hw1.0
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA4019/hw1.0/board-2.bin \
|
|
$(1)/lib/firmware/ath10k/QCA4019/hw1.0/
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA4019/hw1.0/3.5.3/firmware-5.bin_10.4-3.5.3-00057 \
|
|
$(1)/lib/firmware/ath10k/QCA4019/hw1.0/firmware-5.bin
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca9887/install
|
|
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9887/hw1.0
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA9887/hw1.0/10.2.4-1.0/firmware-5.bin_10.2.4-1.0-00033 \
|
|
$(1)/lib/firmware/ath10k/QCA9887/hw1.0/firmware-5.bin
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA9887/hw1.0/board.bin \
|
|
$(1)/lib/firmware/ath10k/QCA9887/hw1.0/board.bin
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca9888/install
|
|
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9888/hw2.0
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA9888/hw2.0/board-2.bin \
|
|
$(1)/lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA9888/hw2.0/3.5.3/firmware-5.bin_10.4-3.5.3-00053 \
|
|
$(1)/lib/firmware/ath10k/QCA9888/hw2.0/firmware-5.bin
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca988x/install
|
|
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA988X/hw2.0
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA988X/hw2.0/board.bin \
|
|
$(1)/lib/firmware/ath10k/QCA988X/hw2.0/
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA988X/hw2.0/10.2.4-1.0/firmware-5.bin_10.2.4-1.0-00037 \
|
|
$(1)/lib/firmware/ath10k/QCA988X/hw2.0/firmware-5.bin
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca6174/install
|
|
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA6174/hw2.1
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA6174/hw2.1/board-2.bin \
|
|
$(1)/lib/firmware/ath10k/QCA6174/hw2.1/
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA6174/hw2.1/firmware-5.bin_SW_RM.1.1.1-00157-QCARMSWPZ-1 \
|
|
$(1)/lib/firmware/ath10k/QCA6174/hw2.1/firmware-5.bin
|
|
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA6174/hw3.0
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA6174/hw3.0/board-2.bin \
|
|
$(1)/lib/firmware/ath10k/QCA6174/hw3.0/
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA6174/hw3.0/4.4.1.c1/firmware-6.bin_RM.4.4.1.c1-00042-QCARMSWP-1 \
|
|
$(1)/lib/firmware/ath10k/QCA6174/hw3.0/firmware-6.bin
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca99x0/install
|
|
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA99X0/hw2.0
|
|
$(INSTALL_DATA) \
|
|
$(DL_DIR)/$(QCA99X0_BOARD_FILE) \
|
|
$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board-2.bin
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA99X0/hw2.0/boardData_AR900B_CUS239_5G_v2_001.bin \
|
|
$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board.bin
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA99X0/hw2.0/firmware-5.bin_10.4.1.00030-1 \
|
|
$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/firmware-5.bin
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca9984/install
|
|
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9984/hw1.0
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA9984/hw1.0/board-2.bin \
|
|
$(1)/lib/firmware/ath10k/QCA9984/hw1.0/board-2.bin
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA9984/hw1.0/3.5.3/firmware-5.bin_10.4-3.5.3-00053 \
|
|
$(1)/lib/firmware/ath10k/QCA9984/hw1.0/firmware-5.bin
|
|
endef
|
|
|
|
|
|
# CT related firmware
|
|
|
|
define Package/ath10k-firmware-qca9887-ct/install
|
|
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9887/hw1.0
|
|
$(INSTALL_DATA) \
|
|
$(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA9887) \
|
|
$(1)/lib/firmware/ath10k/QCA9887/hw1.0/firmware-2.bin
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA9887/hw1.0/board.bin \
|
|
$(1)/lib/firmware/ath10k/QCA9887/hw1.0/board.bin
|
|
endef
|
|
define Package/ath10k-firmware-qca9887-ct-htt/install
|
|
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9887/hw1.0
|
|
$(INSTALL_DATA) \
|
|
$(DL_DIR)/$(call CT_FIRMWARE_FILE_HTT,QCA9887) \
|
|
$(1)/lib/firmware/ath10k/QCA9887/hw1.0/ct-firmware-2.bin
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA9887/hw1.0/board.bin \
|
|
$(1)/lib/firmware/ath10k/QCA9887/hw1.0/board.bin
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca988x-ct/install
|
|
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA988X/hw2.0
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA988X/hw2.0/board.bin \
|
|
$(1)/lib/firmware/ath10k/QCA988X/hw2.0/
|
|
$(INSTALL_DATA) \
|
|
$(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA988X) \
|
|
$(1)/lib/firmware/ath10k/QCA988X/hw2.0/firmware-2.bin
|
|
endef
|
|
define Package/ath10k-firmware-qca988x-ct-htt/install
|
|
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA988X/hw2.0
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA988X/hw2.0/board.bin \
|
|
$(1)/lib/firmware/ath10k/QCA988X/hw2.0/
|
|
$(INSTALL_DATA) \
|
|
$(DL_DIR)/$(call CT_FIRMWARE_FILE_HTT,QCA988X) \
|
|
$(1)/lib/firmware/ath10k/QCA988X/hw2.0/ct-firmware-2.bin
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca99x0-ct/install
|
|
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA99X0/hw2.0
|
|
$(INSTALL_DATA) \
|
|
$(DL_DIR)/$(QCA99X0_BOARD_FILE) \
|
|
$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board-2.bin
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA99X0/hw2.0/boardData_AR900B_CUS239_5G_v2_001.bin \
|
|
$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board.bin
|
|
$(INSTALL_DATA) \
|
|
$(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA99X0) \
|
|
$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/firmware-5.bin
|
|
endef
|
|
define Package/ath10k-firmware-qca99x0-ct-htt/install
|
|
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA99X0/hw2.0
|
|
$(INSTALL_DATA) \
|
|
$(DL_DIR)/$(QCA99X0_BOARD_FILE) \
|
|
$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board-2.bin
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA99X0/hw2.0/boardData_AR900B_CUS239_5G_v2_001.bin \
|
|
$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board.bin
|
|
$(INSTALL_DATA) \
|
|
$(DL_DIR)/$(call CT_FIRMWARE_FILE_HTT,QCA99X0) \
|
|
$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/ct-firmware-5.bin
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca9984-ct/install
|
|
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9984/hw1.0
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA9984/hw1.0/board-2.bin \
|
|
$(1)/lib/firmware/ath10k/QCA9984/hw1.0/board-2.bin
|
|
$(INSTALL_DATA) \
|
|
$(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA9984) \
|
|
$(1)/lib/firmware/ath10k/QCA9984/hw1.0/firmware-5.bin
|
|
endef
|
|
define Package/ath10k-firmware-qca9984-ct-htt/install
|
|
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9984/hw1.0
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA9984/hw1.0/board-2.bin \
|
|
$(1)/lib/firmware/ath10k/QCA9984/hw1.0/board-2.bin
|
|
$(INSTALL_DATA) \
|
|
$(DL_DIR)/$(call CT_FIRMWARE_FILE_HTT,QCA9984) \
|
|
$(1)/lib/firmware/ath10k/QCA9984/hw1.0/ct-firmware-5.bin
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca4019-ct/install
|
|
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA4019/hw1.0
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA4019/hw1.0/board-2.bin \
|
|
$(1)/lib/firmware/ath10k/QCA4019/hw1.0/
|
|
$(INSTALL_DATA) \
|
|
$(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA4019) \
|
|
$(1)/lib/firmware/ath10k/QCA4019/hw1.0/firmware-5.bin
|
|
endef
|
|
define Package/ath10k-firmware-qca4019-ct-htt/install
|
|
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA4019/hw1.0
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA4019/hw1.0/board-2.bin \
|
|
$(1)/lib/firmware/ath10k/QCA4019/hw1.0/
|
|
$(INSTALL_DATA) \
|
|
$(DL_DIR)/$(call CT_FIRMWARE_FILE_HTT,QCA4019) \
|
|
$(1)/lib/firmware/ath10k/QCA4019/hw1.0/ct-firmware-5.bin
|
|
endef
|
|
|
|
define Package/ath10k-firmware-qca9888-ct/install
|
|
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9888/hw2.0
|
|
ln -s \
|
|
../../cal-pci-0000:01:00.0.bin \
|
|
$(1)/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA9888/hw2.0/board-2.bin \
|
|
$(1)/lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
|
|
$(INSTALL_DATA) \
|
|
$(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA9888) \
|
|
$(1)/lib/firmware/ath10k/QCA9888/hw2.0/firmware-5.bin
|
|
endef
|
|
define Package/ath10k-firmware-qca9888-ct-htt/install
|
|
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9888/hw2.0
|
|
ln -s \
|
|
../../cal-pci-0000:01:00.0.bin \
|
|
$(1)/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
|
|
$(INSTALL_DATA) \
|
|
$(PKG_BUILD_DIR)/QCA9888/hw2.0/board-2.bin \
|
|
$(1)/lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
|
|
$(INSTALL_DATA) \
|
|
$(DL_DIR)/$(call CT_FIRMWARE_FILE_HTT,QCA9888) \
|
|
$(1)/lib/firmware/ath10k/QCA9888/hw2.0/ct-firmware-5.bin
|
|
endef
|
|
|
|
#$(eval $(call BuildPackage,ath10k-firmware-qca9887))
|
|
#$(eval $(call BuildPackage,ath10k-firmware-qca9888))
|
|
#$(eval $(call BuildPackage,ath10k-firmware-qca988x))
|
|
#$(eval $(call BuildPackage,ath10k-firmware-qca99x0))
|
|
#$(eval $(call BuildPackage,ath10k-firmware-qca6174))
|
|
#$(eval $(call BuildPackage,ath10k-firmware-qca9984))
|
|
#$(eval $(call BuildPackage,ath10k-firmware-qca4019))
|
|
|
|
$(eval $(call BuildPackage,ath10k-firmware-qca9887-ct))
|
|
$(eval $(call BuildPackage,ath10k-firmware-qca9887-ct-htt))
|
|
$(eval $(call BuildPackage,ath10k-firmware-qca988x-ct))
|
|
$(eval $(call BuildPackage,ath10k-firmware-qca988x-ct-htt))
|
|
$(eval $(call BuildPackage,ath10k-firmware-qca99x0-ct))
|
|
$(eval $(call BuildPackage,ath10k-firmware-qca99x0-ct-htt))
|
|
$(eval $(call BuildPackage,ath10k-firmware-qca9984-ct))
|
|
$(eval $(call BuildPackage,ath10k-firmware-qca9984-ct-htt))
|
|
$(eval $(call BuildPackage,ath10k-firmware-qca4019-ct))
|
|
$(eval $(call BuildPackage,ath10k-firmware-qca4019-ct-htt))
|
|
$(eval $(call BuildPackage,ath10k-firmware-qca9888-ct))
|
|
$(eval $(call BuildPackage,ath10k-firmware-qca9888-ct-htt))
|