mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 08:21:14 +00:00
fde68cb809
Specification:
CPU: Allwinner H5, Quad-core Cortex-A53
DDR3 RAM: 512MB
Network: 10/100/1000M Ethernet x 2
USB Host: Type-A x 1
MicroSD Slot x 1
MicroUSB: for power input
Debug Serial Port: 3Pin pin-header
LED: WAN, LAN, SYS
KEY: Reset
Power Supply: DC 5V/2A
Installation:
Write the image to SD Card with dd.
Note:
1. OpenWrt currently does not support LED_FUNCTION, change back to the
previous practice (Consistent with NanoPi R1).
2. Since the upstream commit https://github.com/torvalds/linux/bbc4d71
("net: phy: realtek: fix rtl8211e rx/tx delay config"), we need to
change the phy-mode from rgmii to rgmii-id.
So set phy-mode for 5.4 and 5.10 respectively.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
|
||
|---|---|---|
| .. | ||
| 062-add-sun8i-h3-zeropi-support.patch | ||
| 100-sunxi-h3-add-support-for-nanopi-r1.patch | ||
| 101-sunxi-h5-add-support-for-nanopi-r1s-h5.patch | ||
| 301-orangepi_pc2_usb_otg_to_host_key_power.patch | ||
| 400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch | ||
| 410-v5.6-arm64-dts-allwinner-a64-olinuxino-Add-bank-supply-re.patch | ||
| 420-v5.7-arm64-dts-allwinner-a64-olinuxino-add-user-red-LED.patch | ||
| 430-arm64-dts-allwinner-a64-olinuxino-add-status-LED-ali.patch | ||
| 431-arm64-dts-allwinner-nanopi-r1s-h5-add-status-LED.patch | ||
| 440-add-h6-pwm.patch | ||
| 441-arm64-dts-add-PWM-node.patch | ||
| 442-arm64-dts-orangepi-one-plus-enable-PWM.patch | ||
| 443-board-h6-orangepioneplus-fix-missing-ethernet.patch | ||
| 450-arm64-dts-enable-wifi-on-pine64-boards.patch | ||