openwrt/target/linux/bcm63xx/dts/bcm6358-pirelli-a226g.dts
Adrian Schmutzler fdd968d64e bcm63xx: replace "ok" with "okay" for status in DTS files
While "ok" is recognized in DT parsing, only "okay" is actually
mentioned as valid value. Replace it accordingly.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-05-12 16:59:04 +02:00

126 lines
2.1 KiB
Plaintext

/dts-v1/;
#include "bcm6358.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Pirelli A226G";
compatible = "pirelli,a226g", "brcm,bcm6358";
chosen {
bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
wps {
label = "wps";
gpios = <&pinctrl 34 1>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
};
reset {
label = "reset";
gpios = <&pinctrl 37 1>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
voip_red {
label = "DWV-S0:red:VoIP";
gpios = <&pinctrl 0 1>;
};
eth_red {
label = "DWV-S0:red:ethernet";
gpios = <&pinctrl 1 1>;
};
dsl_green {
label = "DWV-S0:green:ADSL";
gpios = <&pinctrl 2 1>;
};
usb_green {
label = "DWV-S0:green:USB";
gpios = <&pinctrl 3 1>;
};
power_green {
label = "DWV-S0:green:power";
gpios = <&pinctrl 4 1>;
default-state = "on";
};
power_red {
label = "DWV-S0:red:power";
gpios = <&pinctrl 5 1>;
};
inet_red {
label = "DWV-S0:red:internet";
gpios = <&pinctrl 6 1>;
};
inet_green {
label = "DWV-S0:green:internet";
gpios = <&pinctrl 7 1>;
};
eth_green {
label = "DWV-S0:green:ethernet";
gpios = <&pinctrl 8 1>;
};
voip_green {
label = "DWV-S0:green:VoIP";
gpios = <&pinctrl 9 1>;
};
wifi_red {
label = "DWV-S0:red:wifi";
gpios = <&pinctrl 10 1>;
};
usb_red {
label = "DWV-S0:red:USB";
gpios = <&pinctrl 11 1>;
};
dsl_red {
label = "DWV-S0:red:ADSL";
gpios = <&pinctrl 12 1>;
};
};
};
&pflash {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
linux@10000 {
label = "linux";
reg = <0x010000 0x7e0000>;
compatible = "brcm,bcm963xx-imagetag";
};
nvram@7f0000 {
label = "nvram";
reg = <0x7f0000 0x010000>;
};
};
};
&uart0 {
status = "okay";
};