openwrt/target/linux/bmips/dts/bcm63167-sercomm-h500-s.dtsi
Álvaro Fernández Rojas 11de53729a bmips: increment polled keys interval to 100
There's no need to poll the gpio keys every 20 ms and the linux kernel
documentation suggests 100 ms.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-04-27 15:39:09 +02:00

300 lines
4.2 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later
#include "bcm63268.dtsi"
/ {
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_red;
led-running = &led_power_green;
led-upgrade = &led_power_green;
led-internet = &led_internet_green;
led-usb = &led_mobile_green;
led-wireless = &led_wireless_green;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
};
reset {
label = "reset";
gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
};
};
&ehci {
status = "okay";
};
&ethernet {
status = "okay";
nvmem-cells = <&macaddr_cferom_6a0>;
nvmem-cell-names = "mac-address";
};
&leds {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds>;
led@0 {
reg = <0>;
label = "red:mobile";
};
led_mobile_green: led@1 {
reg = <1>;
label = "green:mobile";
};
led_power_red: led@8 {
reg = <8>;
label = "red:power";
};
led_wireless_green: led@9 {
reg = <9>;
label = "green:wifi";
};
led@12 {
reg = <12>;
label = "red:phone";
};
led@13 {
reg = <13>;
label = "red:wifi";
};
led@14 {
reg = <14>;
label = "red:internet";
};
led_internet_green: led@15 {
reg = <15>;
label = "green:internet";
};
led@16 {
reg = <16>;
label = "green:phone";
};
led_power_green: led@17 {
reg = <17>;
label = "green:power";
};
led@23 {
reg = <23>;
label = "blue:mobile";
};
};
&mdio_int {
phy12: ethernet-phy@c {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <12>;
};
};
&mdio_ext {
switch@1e {
compatible = "brcm,bcm53134";
reg = <30>;
dsa,member = <1 0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
label = "lan3";
};
port@2 {
reg = <2>;
label = "lan2";
};
port@3 {
reg = <3>;
label = "lan1";
};
port@5 {
reg = <5>;
label = "wifi";
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@8 {
reg = <8>;
phy-mode = "rgmii-txid";
ethernet = <&switch0port4>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
};
&nflash {
status = "okay";
nandcs@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-ecc-step-size = <512>;
nand-ecc-strength = <4>;
nand-on-flash-bbt;
brcm,nand-oob-sector-size = <64>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cferom: partition@0 {
label = "cferom";
reg = <0x0000000 0x0020000>;
read-only;
};
partition@20000 {
label = "part_map";
reg = <0x0020000 0x00a0000>;
read-only;
};
partition@c0000 {
label = "cferam1";
reg = <0x00c0000 0x0140000>;
read-only;
};
partition@200000 {
label = "cferam2";
reg = <0x0200000 0x0140000>;
read-only;
};
partition@6920000 {
label = "bootflag1";
reg = <0x6920000 0x0140000>;
};
partition@6a60000 {
label = "bootflag2";
reg = <0x6a60000 0x0140000>;
};
partition@520000 {
compatible = "sercomm,wfi";
label = "wfi";
reg = <0x0520000 0x6400000>;
};
partition@6ba0000 {
label = "xml_cfg";
reg = <0x6ba0000 0x0280000>;
read-only;
};
partition@6e20000 {
label = "app_data";
reg = <0x6e20000 0x0280000>;
read-only;
};
};
};
};
&ohci {
status = "okay";
};
&switch0 {
dsa,member = <0 0>;
ports {
port@3 {
reg = <3>;
label = "wan";
phy-handle = <&phy12>;
phy-mode = "gmii";
};
switch0port4: port@4 {
reg = <4>;
label = "extsw";
phy-mode = "rgmii-txid";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
&pinctrl {
pinctrl_leds: leds {
function = "led";
pins = "gpio0", "gpio1", "gpio8", "gpio9",
"gpio12", "gpio13", "gpio14", "gpio15",
"gpio16", "gpio17", "gpio23";
};
};
&uart0 {
status = "okay";
};
&usbh {
status = "okay";
};
&cferom {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_cferom_6a0: macaddr@6a0 {
reg = <0x6a0 0x6>;
};
};