mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 10:39:04 +00:00
4f74957584
This adds the patches to get fairly complete Gemini support
using kernel v4.14. It is mainly a backport of patches from
kernel v4.16 with omissions of things like graphics that require
substantial changes and will be better handled once we move
to the v4.16 kernel proper.
On top of this are some WIP patches for USB support.
Tested on Raidsonic NAS4220B and D-link DNS-313.
ChangeLog v4->v5:
- Fix ethernet single gmac usecase
- Fix USB reset (patch from Hans)
- Fix Raidsonic ethernet skew delay
- Fix kernel config (bridge, squashfs, jffs2, usb)
- Disable second usb port on Raidsonic board until fotg210_hcd is fixed
ChangeLog v3->v4:
- Make sure to use tabs rather than spaces in base-files.
- Use the dns313 image tool from the firmware-utils.
- Break out the addition of the v4.14 patches and the removal
of the v4.4 patches to separate (big) patches.
ChangeLog v2->v3:
- Update the kernel config as indicated by Hauke Martens:
- Regenerate again after rebasing using kernel_oldconfig
dropping a few optimization settings that are now generic
- Drop CFG80211 stuff (module)
- Drop CIFS stuff (module)
- Drop MAC80211 (module)
- Drop wireless drivers (module)
- Enabled OverlayFS
- Added proper DNS-313 boot image generation with the special
file header tool.
- Disable CMA in the kernel
- Enable LZMA compression of the kernel
- Consequently name the nas4220b images nas4220b
- Update preinit MAC detection script to handle also DNS-313
- Add board.d/03_hdparm to set the disk to spin down after
1 minute by default, if we have the hdparm tool installed
ChangeLog v1->v2:
- Processed config through kernel_oldconfig
- Processed patches through make target/linux/{clean,refresh} V=99
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Roman Yeryomin <roman@advem.lv>
179 lines
4.1 KiB
Diff
179 lines
4.1 KiB
Diff
From dd62aee5d2d24199e71e745544e49a1a8b3c6f7a Mon Sep 17 00:00:00 2001
|
|
From: Linus Walleij <linus.walleij@linaro.org>
|
|
Date: Fri, 21 Apr 2017 20:50:22 +0200
|
|
Subject: [PATCH 31/31] ARM: dts: Add the FOTG210 USB host to Gemini
|
|
|
|
This adds the FOTG210 USB host controller to the Gemini
|
|
device trees. In the main SoC DTSI it is flagged as disabled
|
|
and then it is selectively enabled on the devices that utilize
|
|
it (these per-platform enablements are done on the out-of-tree
|
|
OpenWrt patch set). It is not enabled on the Itian SquareOne
|
|
NAS/router since this instead has a VIA host controller
|
|
soldered on the PCI port, and can gate off these USB host
|
|
controllers.
|
|
|
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
---
|
|
USB maintainers: I will merge this through the ARM SoC tree,
|
|
the patch is only included in the series for context.
|
|
---
|
|
arch/arm/boot/dts/gemini-dlink-dir-685.dts | 8 ++++++++
|
|
arch/arm/boot/dts/gemini-nas4220b.dts | 8 ++++++++
|
|
arch/arm/boot/dts/gemini-rut1xx.dts | 20 ++++++++++++++++++++
|
|
arch/arm/boot/dts/gemini-wbd111.dts | 20 ++++++++++++++++++++
|
|
arch/arm/boot/dts/gemini-wbd222.dts | 21 +++++++++++++++++++++
|
|
arch/arm/boot/dts/gemini.dtsi | 26 ++++++++++++++++++++++++++
|
|
6 files changed, 103 insertions(+)
|
|
|
|
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
|
|
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
|
|
@@ -303,5 +303,13 @@
|
|
};
|
|
};
|
|
};
|
|
+
|
|
+ usb@68000000 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ usb@69000000 {
|
|
+ status = "okay";
|
|
+ };
|
|
};
|
|
};
|
|
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
|
|
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
|
|
@@ -146,5 +146,13 @@
|
|
ata@63000000 {
|
|
status = "okay";
|
|
};
|
|
+
|
|
+ usb@68000000 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ usb@69000000 {
|
|
+ status = "okay";
|
|
+ };
|
|
};
|
|
};
|
|
--- a/arch/arm/boot/dts/gemini-rut1xx.dts
|
|
+++ b/arch/arm/boot/dts/gemini-rut1xx.dts
|
|
@@ -114,5 +114,25 @@
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpio1_default_pins>;
|
|
};
|
|
+
|
|
+ ethernet@60000000 {
|
|
+ status = "okay";
|
|
+
|
|
+ ethernet-port@0 {
|
|
+ phy-mode = "rgmii";
|
|
+ phy-handle = <&phy0>;
|
|
+ };
|
|
+ ethernet-port@1 {
|
|
+ /* Not used in this platform */
|
|
+ };
|
|
+ };
|
|
+
|
|
+ usb@68000000 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ usb@69000000 {
|
|
+ status = "okay";
|
|
+ };
|
|
};
|
|
};
|
|
--- a/arch/arm/boot/dts/gemini-wbd111.dts
|
|
+++ b/arch/arm/boot/dts/gemini-wbd111.dts
|
|
@@ -160,5 +160,25 @@
|
|
<0x6000 0 0 3 &pci_intc 1>,
|
|
<0x6000 0 0 4 &pci_intc 2>;
|
|
};
|
|
+
|
|
+ ethernet@60000000 {
|
|
+ status = "okay";
|
|
+
|
|
+ ethernet-port@0 {
|
|
+ phy-mode = "rgmii";
|
|
+ phy-handle = <&phy0>;
|
|
+ };
|
|
+ ethernet-port@1 {
|
|
+ /* Not used in this platform */
|
|
+ };
|
|
+ };
|
|
+
|
|
+ usb@68000000 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ usb@69000000 {
|
|
+ status = "okay";
|
|
+ };
|
|
};
|
|
};
|
|
--- a/arch/arm/boot/dts/gemini-wbd222.dts
|
|
+++ b/arch/arm/boot/dts/gemini-wbd222.dts
|
|
@@ -165,5 +165,26 @@
|
|
<0x6000 0 0 3 &pci_intc 1>,
|
|
<0x6000 0 0 4 &pci_intc 2>;
|
|
};
|
|
+
|
|
+ ethernet@60000000 {
|
|
+ status = "okay";
|
|
+
|
|
+ ethernet-port@0 {
|
|
+ phy-mode = "rgmii";
|
|
+ phy-handle = <&phy0>;
|
|
+ };
|
|
+ ethernet-port@1 {
|
|
+ phy-mode = "rgmii";
|
|
+ phy-handle = <&phy1>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ usb@68000000 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ usb@69000000 {
|
|
+ status = "okay";
|
|
+ };
|
|
};
|
|
};
|
|
--- a/arch/arm/boot/dts/gemini.dtsi
|
|
+++ b/arch/arm/boot/dts/gemini.dtsi
|
|
@@ -411,5 +411,31 @@
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
+
|
|
+ usb@68000000 {
|
|
+ compatible = "cortina,gemini-usb", "faraday,fotg210";
|
|
+ reg = <0x68000000 0x1000>;
|
|
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ resets = <&syscon GEMINI_RESET_USB0>;
|
|
+ clocks = <&syscon GEMINI_CLK_GATE_USB0>;
|
|
+ clock-names = "PCLK";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&usb_default_pins>;
|
|
+ syscon = <&syscon>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ usb@69000000 {
|
|
+ compatible = "cortina,gemini-usb", "faraday,fotg210";
|
|
+ reg = <0x69000000 0x1000>;
|
|
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ resets = <&syscon GEMINI_RESET_USB1>;
|
|
+ clocks = <&syscon GEMINI_CLK_GATE_USB1>;
|
|
+ clock-names = "PCLK";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&usb_default_pins>;
|
|
+ syscon = <&syscon>;
|
|
+ status = "disabled";
|
|
+ };
|
|
};
|
|
};
|